I used the UCLD2 CWM leak, including the root and fb/sammy keyboard patch, then booted up. (I've tried this about 3 times now with same results)
It boots up, and I get texts/calls and bars but 3g/4G LTE is missing, and can not access anything involving data - it expects me to connect to WiFi.
My baseband says "Unknown" but to my understanding, that is expected.
I have also tried using the radios/modems available here in the Skyrocket's all-in-one stop thread.
Any suggestions?
Check APN settings?
Tried that, but I ended up loading up the Sky's UCLD2 rom. UCLD2 Radio worked fine with it.
Thanks for the help though.
Related
Alright I am lost.
I was using Rav's Rom with the KB3 radio, but I got bored. SO I tried out du5t3r's ROM with the KD1 radio he had at the bottom of his page. The data kept working, but I got bored with the ROM and flashed Supesop's 8.2 still running with the KD1 radio.
Here's where the radio/data issues start coming in. Supesop's ROM wouldn't get any data connection. At all. I even tried flashing the other radio images (KB1 and KB3), but both yielded the same results....no data.
So I tried flashing Inifinity's 1.1.0 ROM. This yielded a slightly different result. I get data (grey radio scale) but it never turns green....therefore I cannot download anything from the market nor will it connect to my gtalk. I flashed ALL three radios (Kb1 KB3 KD1), yet the results were all the same. Grey scale, never green.
I tried reflashing Rav's ROM...all three radios only yielded the grey data.
So now I am back to bu5t3r's rom with the KD1. It gives me the green bars, and I am fully connected...
But what was the matter with the other roms? I never had trouble with data and radio images until I flashed bu5t3rs ROM...And I have been flashing roms for a while, so I always went through the proper steps. And I never messed with the kernels with these ROMs either except with bu5t3rs (i flashed netarchy's). I am lost. Hmph.
Thoughts? Help?
Hi,
I recently decided to flash a jeallybean ROM since most of them are getting really great and we don't have any word on the official update. Unfortunatly, I'm now unable to get a data connection on my HOX. It's the rogers version which I unlocked and I'm now using on the Bell network. Before flashing, LTE worked fine with the stock sense ROM, but now I don't have any data at all.
ROMs I've tried :
AOKP, MIUI and CM10.
I've tried to : set the data connection to GSM only, nothing, to LTE only, nothing, to WCDMA only, nothing. I've tried all the APNs I've found (pda.bell.ca, pda2.bell.ca, inet.bell.ca). On AOKP it sometimes said "Error while searching for network". WiFi, texts and calls work fine.
If anyone could help me, it would be really appreaciated. Otherwise I'll just revert to Rogers ROM. Thanks alot!
I cant offer any help, but I'm having a similar issue recently. I was on a nightly build of CM10 (from 10/06/12 I believe). I upgraded to a newer build (from 10/10) and I get no data over cell. I flashed it back and things were fine.
Dravyy said:
Hi,
I recently decided to flash a jeallybean ROM since most of them are getting really great and we don't have any word on the official update. Unfortunatly, I'm now unable to get a data connection on my HOX. It's the rogers version which I unlocked and I'm now using on the Bell network. Before flashing, LTE worked fine with the stock sense ROM, but now I don't have any data at all.
ROMs I've tried :
AOKP, MIUI and CM10.
I've tried to : set the data connection to GSM only, nothing, to LTE only, nothing, to WCDMA only, nothing. I've tried all the APNs I've found (pda.bell.ca, pda2.bell.ca, inet.bell.ca). On AOKP it sometimes said "Error while searching for network". WiFi, texts and calls work fine.
If anyone could help me, it would be really appreaciated. Otherwise I'll just revert to Rogers ROM. Thanks alot!
Click to expand...
Click to collapse
Before flashing jelly bean roms you need to flash a sense rom then do full wipe and install cm10 or aokp..
jspidey said:
I cant offer any help, but I'm having a similar issue recently. I was on a nightly build of CM10 (from 10/06/12 I believe). I upgraded to a newer build (from 10/10) and I get no data over cell. I flashed it back and things were fine.
Click to expand...
Click to collapse
Sent from my HTC One X using xda premium
I have the exact same problem with my SGS using the X-bean 3.0 rom.
What's the best solution? Is it because I used to Cwm?
Svenomous said:
I have the exact same problem with my SGS using the X-bean 3.0 rom.
What's the best solution? Is it because I used to Cwm?
Click to expand...
Click to collapse
Every device has its own nuances, as do various ROMs. So I'd advise posting this in the forum specific to your device.
Still no data connection.
I am having the same issue with my AT&T One X phone.
The phone was running 2.20 before it was unlocked/rooted. Installed TWRP, was a noob and forgot to save a backup, fastbooted the boot.img, flashed AOKP and CM10 successfully. With both of these ROMs, I could not get internet to work via cellular connection. I have tried everything with the APNs (even had AT&T help me setup APN settings) and still no mobile data connection. I can still receive/send SMS/calls, use bluetooth and wifi, just no mobile internet.
I'm not entirely sure what to do next. I attempted to go back and flash the UrDroid 4.1 Stock Sense ROM, but after fastbooting it's boot.img and attempting to flash with TWRP, I got a signature verification failure. Got scared and restored back to AOKP (I remember to make a backup this time.)
Thoughts? Sorry for being a noob.
Are you in an LTE area?
redpoint73 said:
Are you in an LTE area?
Click to expand...
Click to collapse
I am in a "4G" area (HSPA+) but I am also a hour drive away from LTE. I have tried APNs for both, but AT&T recommended I stick to the LTE APN. AT&T had me go to Settings->More->Mobile Networks->Network Operators and the phone just sat there searching without finding anything. I just did that above operation again and it found AT&T and I selected it. It spins on "Registering on AT&T..." for a few minutes and eventually errors out "Cannot register on this network at this time."
Have you tried switching off LTE by selecting "GSM/WCDMA Auto" in Settings?
I've had data problems on certain ROMs, where turning off LTE got the HSPA+ connection working.
In that case, it was probably a base of build.prop not playing well with AT&T's network. Although I would think the ROMs you mentioned would have these issues worked out at this point (and for some time now).
redpoint73 said:
Have you tried switching off LTE by selecting "GSM/WCDMA Auto" in Settings?
Click to expand...
Click to collapse
When I switch to "GSM/WCDMA Auto", it immediately switches itself back to the LTE setting. This is concerning.
Not getting a cell phone signal at all on my Captivate. very rarely I get it and it stays on until I reboot for some reason, or sometimes goes off on its own. No problem with wi-fi or anything else.
Have had Gingerbread 2.3.5 - KK4 (official) for a long time, and did not have this problem. Here is what I did:
Installed Cyanogenmod 9.0 (ICS 4.0.4) on my Captivate that had the stock Gingerbread KK4. Also installed the gapps-ics package from 29 April 2012
I did this after rooting, and installing clockworkmod.
Even updated it to Cyanogenmod 9.1, but have the same issues.
More detail on it:
- The cellular radio shows no signal, but Wifi is on fine.
- When I press the power button, I see the power off and reboot options, including one that says "Airplane Mode is ON", although it clearly isn't since Wifi is working
- A couple of times, I rebooted into recovery, and did a "repair permissions" and rebooted, and it got a signal, but does not happen always
- Once the signal is on, it stays on for the whole day, but goes off again after a reboot
- Turning Airplane mode on and off does not help
Is this a modem issue, that seems to be a popular problem. It's almost as if there is a software bug that fools the phone into switching off wireless radio
Please help me fix it, or share successful fixes
I had same problem when I went to helly bean then back to remics-jb I flashed back to stock then back up to what I wanted it fixed the problem so I think its the modem.
Sent from my SGH-I897 using xda app-developers app
You need to flash to stock and back.
Sent from my SGH-I777 using xda premium
How do you flash your rom?
Im a little bit afraid to bricked again my cappy.
Sent from my SAMSUNG-SGH-I897 using xda premium
KOROCK is right
So were you able to fix? I had a similar problem as well; I made the mistake of putting cm9.1 on and it bricked because I followed the instructions that popped up when I thought I had flashed it correctly. I tried everything; this is my daily driver so I had no choice but to find a fix, and find it fast as my clients were unable to get a hold of me for a few hours.... Anyways, got a little off track; but did you fix?
up_on1 said:
So were you able to fix? I had a similar problem as well; I made the mistake of putting cm9.1 on and it bricked because I followed the instructions that popped up when I thought I had flashed it correctly. I tried everything; this is my daily driver so I had no choice but to find a fix, and find it fast as my clients were unable to get a hold of me for a few hours.... Anyways, got a little off track; but did you fix?
Click to expand...
Click to collapse
Not fixed yet. Wheredo I get the stock rom.?
rdugar said:
Not fixed yet. Wheredo I get the stock rom.?
Click to expand...
Click to collapse
A little search/reading goes a long way.. http://forum.xda-developers.com/showthread.php?t=1300843
KK4 is what you'll want to go back to stock but I highly suggest you read this before you do anything http://forum.xda-developers.com/showthread.php?t=1350266
Also, before returning to stock, you could try flashing a different modem.
Check to see if your baseband is still there. If it said "Unknown", you need to restore it. CM9 is supposed to have the modem.bin file included though. Check to see if the /radio folder have modem.bin in it, if it does, and the baseband still say Uknown, then manually delete the modem.bin, do a wipe and reflash a CM rom that have modem.bin included.
If Baseband is still there and still no signal, then check to see if IMEI is corrupted or lost (if its null or doesn't match the back of the phone). You can either copy over the efs backup folder if you have one and "fix permission" in CWM. If not, then you need to ODIN the phone to stock to fix it.
I have two questions 1) is my only way to fix this to go back to stock ICS using ODIN? 2) Once i get back to that, what do i do in order to get to a working version of JB? is it as simple as trying another ROM? Is it ok to skip ICS and just flash another version of JB?
Background if you want it....
Followed vincon guide : http://forum.xda-developers.com/show....php?t=1773659
Started with Stock ATT 4.0.4
CWM via odin
baseb: UCLI3
I flashed JB [ROM] [4.1.2] [UCLL3] Stock Debloat to my i727 last night. Everything went seemingly smooth, everything worked with a strange exception being my exchange account wouldn't authenticate.Today my service is off about 95% of the time, then it will come on and ill get a text or two, then it goes off. voice calls dont work at all. LTE data is hit or miss.WiFi works
In phone status under network type its toggling: UTMS:3 to HSPA:11 to HSPAP15 to no service...then it drops everything and service state will say out of service and disconnected.
My IMEI is correct, I confirmed that.
It tried dialing the *#*#XXXX#*#* thing, that just said no connection and ended.
I started to go down the path of looking to flash a new radio, but that just doesn't seem like the answer to me... obviously the risk of me being wrong is high. i did check the MD5 numbers on other radios though and they came back as mismatched, so i did nothing there.
Also i wiped cache 3 times, as well as dalvek
Is there a simple solution that Ive missed or do i need to go to stock via ODIN? What, if anything, did i do wrong>
If you didn't flash corresponding UCLL3 baseband - AFAIK intermittent service is expected.
If you need to flash baseband - flash the latest UXUMA7 baseband.
Well i've actually had the exact same problem, in several variations and on several androids and here's my conclusions:
1 Magnetic storms and grid issues with the carrier. There's not much to do about these, except maybe for a making a tin hat for your phone. But, on a second thought this would also kill the signal
2 If the issue persists for more than a couple of days then the other thing for me was = radios that just didn't work with my carrier or rom. Changing these showed instant results.
I actually had this exact problem but for me it was on the carrier end. I tried every ROM and radio out there to no avail. After about a month and my parents also experiencing the issue, we called the carrier and they had it fixed in about two weeks.
Sent from my SGH-I727 using xda app-developers app
thanks for the help -
gonna try latest baseband and see how it goes
bgcole said:
thanks for the help -
gonna try latest baseband and see how it goes
Click to expand...
Click to collapse
It worked. Thanks again to all.
That's good to hear
Hello peoples, hoping for a little help here.
TLDR; After downgrading firmware (big mistake) from 629, i reflashed back to 629 only to discover that my wifi will either connect and work intermittently, or (as is the case ATM) my wifi will connect and immediately disconnect, everytime it connects. I would like some guidance on how to get wifi working consistently, regardless of what firmware i need to be on, or what rom I need to flash. If i can get a rom that has wifi and camera that would be a plus. I searched and found one or two threads on the issue but related to earlier OTA upgrades.
More details;
Accidentally phsically destroyed my SG S3 a week ago or so, which meant I had to go back to using my wifes Motorola Droid 2 Global
Decided that since I was stuck on Gingerbread, and that since Verizon doesnt care about D2G anymore, I was going to root and upgrade, so I started researching and experimenting. That was my first mistake
So I;
- Tried to downgrade to 2.4.330 firmware per the (wiki.cyanogenmod.org/w/Install_CM_for_droid2we) Cyanogenmod wiki instructions for droid 2 global, which "soft bricked" my device (stuck in bootloader with a "service req'd" message). From doing a bunch of searching online and reading, I'm guessing its because the phone was previously on the latest version of android pushed to the droid 2 global, namely, 4.5.629.
- I then found (rootzwiki.com/topic/23207-how-to-sbf-unbricking-root-d2g-629/"official 629 sbf) and reflashed my device with that (the link at the top of the thread)
- I dont remember everything I did next (or if i even tested wifi at that point), but i know the device booted and "looked normal". I know I then rooted with framaroot, and installed bootstrap mod (1.0.0.5), and did a bootstrap recovery (im guessing this is synonymous with installing clockwork mod??)
- Found and flashed (installed?) CM9-D2-01032013.zip (cant post links, sorry new user restriction) -- rootzwiki.com/topic/28082-d2d2gdx-cm9-build-thread/page-90
- The rom installed fine, but when I booted up, and tried to use wifi, the wifi would connect, but the internet wouldnt work (no response from any website).
- I downloaded some kind of "wizard" bootloader, that had a wifi fix (sorry I cant find the link). I rebooted into the bootloader, ran the wi-fi fix, and then rebooted. No luck (no change).
- I figured it was an issue with the ROM, so I flashed liquid_droid2we-ics-v1.62.zip
- Unfortunately, the same issue persisted.
- I then reflashed BACK to 4.5.629, using the --(cant post links apparently since im a new user) (rootzwiki.com/topic/23207-how-to-sbf-unbricking-root-d2g-629) -- "official 629 sbf"
- Wifi STILL does not work. At first it connected, and was responding, and then it stopped responding.
- Wiped cache partition
- Wiped data/factory reset
- wifi now connects, then disconnects immediately.
I'm at a loss here. I am on 4.5.629 using the official ROM, I tried a factory reset after a cache clear. I even found some suggestions about turning battery saver mode off, which I did. WTH am I doing wrong?
EDIT 9/19: Just discovered that I can connect to insecure networks just fine. I've read about changing my router settings as a possible fix, but I cant do that for any router thats not my own. In addition the wifi was working on my router before, with the same settings, so the phone broke somewhere along the way.
I was able to resolve the wifi issues I was having by simply unplugging my modem and router (though just rebooting the router would have probably fixed it). I don't know exactly what caused the issues, but it was probably multiple factors, including having a droid2 and droid2global right next to each other trying wifi, flashing multiple roms, and having dd-wrt firmware on my router (or all of the above). In anycase, doing a reboot of the router, caused wifi to work again consistently on both my droids.