How can i install android on nand if my d-pad is not working?
My d-pad is broken, i try pushing volume up when phone request, but no result.
Anyone can help me install android on nand?
follow the guide in atool help.
i've manage to install with atools, using scripts.
I have another question now, is there a fully working build for pola200?
I have two different version, with one camera is not working, with the other one wifi don't working. What is the best combination for pola200?
2.6.25 has both camera and wifi working. probably you miss to installa the module update (latest works for both 2.6.32 and 2.6.25)
i've managed to get fully working froyo with 2.6.25.
what's the differences between 2.6.25 and 2.6.32? (is .32 a must have, or i can use .25 kernel with no problem?)
where did you got it
where did you got it, and do you exist also SD version
Related
i updated my touch cruise with the new rom from htc. now when i get an incomming call it won't answer,the ringer volume gets lower but thats it.
any suggestions on how to fix this?
i have installed the rom 3 times now.
you've updated the windows mobile rom,
you need to upgrade your radio rom to suit. Try a 1.59.xx series rom.
Without the proper radio rom, the windows rom doesn't "know" how to use its hardware.
thanks i'll try that
tried 3 different radio roms still not working right. any other ideas.
What are current versions of ROM & radio?
i updated to shekhar's pola 3.1 and everything is working perfect
thanks for the help.
Sorry if this is a N00B-Question:
I rooted my fresh Andoid with the follwowing ROMs:
JF 1.51 ADP
JF 1.51 EU
Cyanogen 3.9.7 Exp
and i am running into the exact same Problem all the time:
Both, Bluetooth and Wifi will not activate if I try, and the Screen Orientation Sensor is also not operating.
Sorry for not providing a log, but i needed to reflash Cyanogen 3.9.6 to Post this. 3.9.6 is working as intendet, with the mentioned Maps Bug which is solved in 3.9.7... Yes I wiped all the time, did not Help.
I hope this Bug is known to someone, since I did nothing but flashing some ROMs.
I have a pretty Standard Vodafone Magic CRB43 from Germany (since I am german...) SPL was as expected, i used the crios SPL update.
http://forum.xda-developers.com/showthread.php?t=538633
This version of Cyanogen's 3.9.7 works fine on my Vodafone Magic, also from Germany. Try and see if it works, remember to wipe.
If g-sensor still does not work, remove /data/misc/akmd* /data/misc/rild* in recovery mode.
Thank you!
That is the very Thread i got my 3.9.6 from, but i overlooked the word "port" in the Thread-Title and thought it was the original^^
The new 3.9.7 is working perfectly even without any wipes...
As I expected: How very noobig of me
Solved and can be closed
I just got my phone back from a service, flashed it with CyanogenMod, and I'm noticing a similar issue with the sensors. Is the above instruction to delete those /data/misc/{akmd*,rild*} files the only way to trigger an auto-calibration? What other ways can the sensors be corrected?
I installed Incubus26Jc's Super FroYo RLS12 All Lang Themed on my POLA100
When connecting to my wifi is says: Obtaining IP adres from wifi, then it stops and then my connection is disabled.
Am I the only one with this problem?
same here, you are not alone
can anyone help us pls?
Same here no IP assigned...no wifi
two simple question:
how do you "install" it?
which radio version do you have?
Same thing happened to me using radio 1.59.44.02 so I flashed radio 1.65.38.14 and voila. GPS works fine as well.
Regards,
Gunner22
I've got the same problem on my Pola200 (XDA Orbit 2), radio 1.59.42.15d3 (original from O2) with the Froyo installations:
- Incubus26Jc's Super FroYo RLS12 All Lang Themed
- VaniljFroyo RLS2
I installed them from SD card with haret.
I also tried VaniljEclair RLS8b: with Eclair it works. But I prefer Froyo because of better performance and design.
I have RLS12 with radio 1.65.38.14 installed on NAND and I am having this problem. (I have also tried one of the 1.59 series radios and it did the same)
I had RLS11 running on SD and wifi was working.
Try to reflash system on nand, sometimes doesn't work correctly and after update radio i suggest to reinstall system.
1.) Reflashed polaimg-panel3-320-froyo-26-07-10.nbh
2.) Reinstalled Incubus26jc's Super Froyo (RLS12)
3.) Tried wifi again... still broken
4.) Restarted then did a reinstall and wipe of data...
5.) Wifi now works!
Thanks!!
Hi!
I have the same problem. I flashed my Pola 100 with the
Polaimg-panel3-320-froyo-26-07-10.nbh and Incubus26Jc's Super FroYo 2.2 RLS12
It's just saying "obtaining IP address".
Then I thought "a radio update couldn't be bad...". So I updated it to Polaris_Radio_1.64.08.21. It still didn't work. Then I read l1qu1d's post:
"Try to reflash system on nand, sometimes doesn't work correctly and after update radio i suggest to reinstall system."
...and reflashed my Pola 100. It still didn't work, so I looked for the newest radio update and updated my phone to Polaris_1.65.38.14.
You'll know the result: Still "obtaining".
I just have no idea anymore. Please help me!
EDIT (2. August): Now I tried Polaris_Radio_1.65.30.09 - still not working - and assigning a static IP to my Pola100 - also not working.
P.S.: Just a question. What's the matter with the PIN code? I know, that I have to deactivate it. But why doesn't it work with our android flashed phones?
@skaterbub2003 reinstall the system. PIN doesn't work because none wrote the kernel part to make it works, there are other priorities.
Well, so let's try it again.
Oh, and thank you for answering my PIN-question. Didn't mean to criticise the work of the coders. I just was curious.
Hi.
My pola100 is stuck on obtaining ip address too.
First, I've installed android on nand, wireless didn't work, so i flashed new radio and wireless still not working.
Finaly i reinstalled android on nand again and stil not working
My rom is Incubus26Jc's Super FroYo RLS12
My radio is Polaris_1.65.38.14
Can anyone help??
(sorry for my english)
As suggested from l1qu1d, I reinstalled the system again (twice). Both times, the problem with "obtaining the IP-Address" remained.
Well, has somebody an idea?
ROM: Incubus26Jc's Super FroYo RLS12 (26/7/2010)
RADIO: Polaris_1.65.38.14
I have the same problem.
RLS11 on NAND: work fine.
RLS12 on NAND: don't work.
any solution?
Ok, i fix that.
The solutions is don't use "install-seq.sh"
ProgMaq said:
Ok, i fix that.
The solutions is don't use "install-seq.sh"
Click to expand...
Click to collapse
Oh my god! I love you! It's working!
Thank you!
skaterbub2003 said:
Oh my god! I love you! It's working!
Thank you!
Click to expand...
Click to collapse
Hehe, no problem, and sorry for my bad english, I'm spanish
I think the problem is in permission, i fix it when i came back to italy.
Hi Guys,
my first post here and hopefully not the last
Got the same problem on my pola200, using the super froyo rls12 with 1.59.46.12 radio.
the other radios i tested didnt let me phone, and i think a phone should be supposed to phone primaly ;-)
Im using the haret boot variant as long it doesnt work right.
As i read u solved the problem, but i dont get a clue out of your hints. What should i use instead of install-seq.sh? Cause if i remove it and try to install the system it just hangs resulting in a scary kernel panic...
Update: Ok, got it now. The phone did boot up so fast that i did had no chance to start the installer, i need to hold the required buttons before the message to push the buttons appears
lets see if it works now
Update 2:Yes, it works! As you thought l1q1d, the problem lies down somewhere in the permissions. Using the "Fix Permission" tool from the Android setup tool did fix the Problem.
hi there,
i am curious to learn from you..
i installed the android with haret and NAND. both types of installation. i tried with all released of android Eclair, Froyo etc..
in both types of installation, the android works very slow and freezing sometimes.
the installation was OK (after reading everything about installation on nand and haret) but still freezing sometimes and working very slow.
could someone tell me if i do something wrong? or we can not use android in our pola 100 as default OS? i really want to use android on my phone..but if work like this..NO THANK YOU.
somebody can give me an answer? or on your phones android work perfectly?
please excuse my english
waiting your answers.
Which radio did you have on the phone?
Are you sure that you have install on nand partition?
Which release did you exactly test?
radio is 1.6 i think and i installed VaniljEclair_RLS11 and i'm sure that i installed in NAND..i tried in bouth ways. yours nevers freezing..or working perfectly?
installed with Atools NBH editor and changed the TGZ in atools
Try one of the latest froyo.
Radio has 3 set of numbers... and all are very important!!
thank you for your answer l1q1d .. i instaled again on SD (haret method) and i installed a new radio version 1.65 and look like working faster..i keeped the eclair because with froyo is slower.
another question, why when i put a ringtone (choosed by me) and somebody calls me appears on the display only after 4 calls on person (i mean he need to stay with phone on his ear and hear 4 ringings to can see myself on the display) if i deactivate the vibration and let a ringtone from android is same thing.... and why on wind mob i have 50% batery and on android i have 100%?
these are my questions.
the radio version is 1.65.38.14
battery need some tuning, charge and recharge...
what do you mean with charge and recharge?..i can not understand..
i really want to use the android OS ..
could you please tell me about calling and answering problems? need some tunning too?
install radio 1.58.21.23. Kernel battery need some charge-discharge cycle to get correct results (without powering off)
l1q1d what can you tell me about answering problem..do you think i can solve the problem with radio 1.58.21.23 ?
i didn't suggest you to try it!!!!
And also use a Froyo distrib
hi l1q1d, i use froyo RLS 16, but i can not use wifi with this version and is same us eclair at calling.
when somebody calls me..i need 4 calls to can see on my screen who calls me.
please tell me if you have this problem..and how to can solve this problem.
please give me an answer.
Did you update the radio and still you have the problem?
Which kernel did you use?
Where you download rls16?
i updated the radio like you told me,
i use karet 2.6.36
and froyo RLS16 from here http://forum.xda-developers.com/showthread.php?t=712310
please tell me what to do to loos that problem with calls...
when i call..everyhing seems to be OK, but when sombeody calls me..i can not see nothing until he rings 4-5 times.
where is the problem
and where can i found a froyo rls16 with working wifi?
i modified the wifi.ko in the archive with one from rls 13 but still nothing.
please help me to solve the problems.
waiting for your answers...
the Haret is 2.6.32 ..sorry for the mistake..not karet 2.6.36
Flash latest kernel and use another distro from kaiser thread
hmmm...l1q1d..please make me understand...
you want to use latest haret that is 2.6.32 and whant to take froyo release from kaiser?
please make me understand...
will solve my problems with answering?
Follow the guide on atools 1.0.4 (download it from my sig) go to help and follow all steps.
The "system" releases are device indipendent so you can take it from Vogue/Polaris/Kaiser thread.
Only nbh or default.txt need to be modified (with atools)
You can use 2.6.25 or 2.6.32.
only 2.6.25 has working camera.
Also flash 1.58.xx.xx radio (look in cruise rom develop)
an with this you tell me that i will solve all problems and can use ANDROID on my poalris?
will be great
i will test it and inform you.
thanks
hi xda,
i installed the new kernel 1.1.1 from this treat http://forum.xda-developers.com/showthread.php?t=2615010
and im on CM 11
and yes, after flashing i did a Cache wipe
then i wanted to test BLN *free* and the app says " active" but when i run a test, nothing happens....
did i something wrong ???
PS: i flashed kernel 1.2 Phone crashed at enableing PIN
THX for help!
Hobi
I've got the same issue with kernel, even with newest version.
As I'm actually having sub10 posts, I'm not able to write in the original thread directly.
Is there any other Kernel ot there for 9105 stock roms with BLN support?
how to...
Has anybody using this kernel on stock ROM a short introduction how to get BLN working?
I already copied the mentioned capri.lights.so to the given folder and restarted the phone, but it still doesn't work.
What else do I have to change to get it work?
The app ButtonLED works, but I would to use BLN.
Best regards