Hi, im having major instability problems with radio rom 02.30.21. While I can just re-install my original jamin rom i would like to stay with the AKU2.3 im running but use the older radio version.
Any anyone extract this file and provide me with a copy. Ive looked into how to do this myself but its a little beyond me.
Thanks
Same here
dannyoneill said:
Hi, im having major instability problems with radio rom 02.30.21. While I can just re-install my original jamin rom i would like to stay with the AKU2.3 im running but use the older radio version.
Any anyone extract this file and provide me with a copy. Ive looked into how to do this myself but its a little beyond me.
Thanks
Click to expand...
Click to collapse
Since installing 02.30.21, I have had completely random times where I cannot be reached. My phone will not ring during a call, and I often don't even get a message indicator like I did before, even if the caller left a message.
I am running the Official Jamin ROM, the only thing I've updated is the radio ROM. Would love to downgrade again if someone makes the old ROM available...
Alan
Look on the FTP server
/Prophet/Prophet-roms/RadioRom/
i need to soft reset my phone atleast 3 times a day, depending on how many calls i get. it rings, i answer, i cant hear anything and the other party cant hear me, only way i resolve this is with a soft reset. it did this on the original rom i got with the phone, then i u pgraded to latest original rom, still the same..
now im on udK Syrius R4 - Blackstone Build 20757.1.4.0 - WWE ( must admit i love this rom ) but still the same problem, i have updated to latest radio version too, now im stuck pulling my last 2 strands of hair out with this, any help be much apresicated. thx
on o2 network in uk
I used to experience trouble like this with some custom roms and finally flashed this rom and this radio, and now eveything is back to normal
yer, the problem comes from having a mismatched radio rom and operating system.
I used to have the same problem till I reflashed to the correct radio rom.
Hi, ive flashed a few handsets before (wallaby x2, alpine and a wizard) and had no problems but for some reason cannot even get off the first hurdle with my t-mobile vario iv and cant even unlock the dam thing to flash a custom rom! ive looked at post after post and downloaded so many programs like hard spl and nothing works. the programs ether wont even open or they fail half way through the process but havent bricked my phone so far (fingers and toes crossed!) please could someone help me with what unlocking software i need, what radio rom and main rom i should be using. Really i would like to try a standard wm6.5 rom and then try custom roms after but like what nrg have done if stock is not avaliable. its model is RAPH300 part no- 99HFP013-00
my current rom version is 1.69.110.8 WWE
my current radio version is 1.02.25.19
protocol version 52.33.25.17U
my email is [email protected] if you prefer to help via email
thanks in advance everyone, steve.
Anyone out there?
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
duke_stix said:
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
Click to expand...
Click to collapse
thanks for trying to help, have you ever read something over and over and repeatedly missed something in it? i think thats what i did wrong. i did not see the bit about removing my sim card even though i had read the noobs guide again and again. removed my sim and bosh, spl worked! then everything else was a breeze and i am now running the energy 3.0 wm6.5 rom! havent flashed the radio yet but will probably do that today. the energy rom is a vast improvement on my stock 6.1 rom in many areas and seems to have improved camera performance quite a lot (not quality) and the menus are going to be great once i have got used to the totally different interface. does anyone have any sugestions on other roms tha may be better than this one?
Hi there
Glad to hear you got it working!
I am personally using NATF's WM6.1 lite touch pro rom as all i look for in a rom is stability as i actually use my phone for phone/text purposes and there is nothing more annoying than a hanging phone when your trying to quickly reply to a text message!
Hi. I know this matter was discussed in the past but I wonder if somebody found out solution how to downgrade radio rom version. I installed v1.56.70.11 and my phone get jammed after 1-2 days. Even hard reset doesn't work (starting process freeze with Palm logo and installing bar at the end) and I always have to reinstall Windows - I've tried all version of Windows - 6.1 veisen, 6.5 base and 6.5 apps navenedrob. I've tried to flash many different (older) radios but after that v1.56.70.11 is still there. I've also tried to flash original windows ROM but it didn't affect radio rom.
Does anybody know any solution?
Thank you
Alfa
Hi.
I have a Pola100 and I have tried both the VaniljEclair and the Incubus Froyo builds, with the latest DZO kernel.
The problem is that I cannot make calls, the phone registers the incoming or outgoing call, but there is no sound. Also I have not gotten the camera to work on either of the builds. I've searched around the forum but have not found a solution.
Is this fixable? I can live without the camera, but making calls is kind of usefull
Otherwise Android looks great on my phone, no problem with Wifi, market and it is rather fast.
Thanks in advance.
You don't explain if you are using haret or nand install, which is clearly your version of kernel and rom and if you have put any update. Please add some further information
Sorry, still quite new at this.
I'm using NAND install, did a "task 29" previous to my last flash. Right now I'm using the DZO from 01-07-10 and the Incubus FROYO RLS4.
Tried with the VaniljEclair RLS7b on the same DZO, but with the same result. I have not applied any updates to my current install.
Lacking ability to call and camera with both setups.
Hope this helps
Ok, which is your radio version?
If I have understood correctly the radio version is displayed in the bootloader menu.
I used a Harspl guide I found here on the forum and now it reads
SPL-2.20.OliNex
CPLD-2
Sorry for being a noob
I've got the same problem on a pola 100.
I'm running on nand (just removed WinMo yesterday evening, now I regret ...).
I use incubus26jc rls5 froyo.
I tried the two latest eclair.nbh (modified with the nebh editor to make it to panel 1).
Also, I tried radio version 1.58.21.23 , 1.58.26.20 , 1.64.08.21 .
Just like jolok I have spl-2.20.Olinex and CPLD-2.
My issue is that the sound work befor the 1rst call after rebooting my phone, and a few second after the 1rst call is made (in or out call), se sound stop (or even crash and loops), and then, no more sound on the phone after ending the call.
Also, the camera has a messed up screen, no idea why.
How do you other guys make it work correctly everytime ???
Try to update to the latest froyo version, many issue were fixed
Like I said, I already have incubus26jc rls5 froyo, the latest one ... or is there elsewere an other source for me ?
Just tested, same with incubus26jc eclair ... seams it comes from the radio or the nbh. What should I use ?
Ok, I tried the whole process over again, to see if that would help, but no.
First I did a "task_29", to clear the nand, then I flashed the 02-07-10 DZO .nbh (I edited it to panel 1 with the nbh tool).
Then I flashed the radio rom, I started with Polaris Radio 1.58.21.23 (and worked my way trough all of them)
Finally I installed the Incubus/DZO Froyo 2.2 RLS5.
I have tried alle the radio roms found in the Polaris radio thread;
Polaris Radio 1.58.21.23
Polaris Radio 1.58.25.14
Polaris Radio 1.58.26.20
Polaris Radio 1.64.06.04
Polaris Radio 1.64.08.21
I cannot get the camera to work, it only displays a purple/green/black striped screen and I cannot make calls. The phone registers calls going out and coming in, but there is no sound.
Can anyone help, or explain what I'm doing wrong?
I very new to this and I don't understand how the rest of you get your setups to work
Hey !
I just managed to get my phone work again, with calls and camera !
I found a "old" radio : version 1.59.46.12 .
It is the one I had with WinMo, I think my error was to update it ...
Currently, It works with eclair, but I think it will also work with froyo, testing soon.
I upload the file in attachment.
It works well on incubus26jc froyo rls5 !
I can now again use calls, camera, install apps !
I don't know why only this radio is working on my phone ...
I remember it was the radio I had for a while, it was flashed when I hard-spled my polaris, and I flashed it for 1.64.08.21 when installing froyo, but seams it was a mistake.
Hope it will help you !
Does anybody now why I can only use this radio version ? Does it have a link with the spl version ? (2.20 olinex)
This is great! Tank you very much ReMix3D
The radio fle worked lke a cham for me as well, I can now make calls and even the camera is working.
Calls and camera working in VaniljEclair RL7c
The camera also works in Froyo RLS6, id not test calls, sticking with the Eclair build, seems to gor faster and smoother on my phone.
Thank you so much for the help
I had exacly the same problem. This radio version fixed it.
Thanks a lot!
That is the same Radio version (Polaris_Radio_ROM_1.59.46.12.rar) that pcarvalho recommends in his WinMo 6.5 rom page.
As I was using his rom and thus that radio prior to Android, I guess I just got lucky that this worked so well with Android.
ReMix3D said:
Hey !
I just managed to get my phone work again, with calls and camera !
I found a "old" radio : version 1.59.46.12 .
It is the one I had with WinMo, I think my error was to update it ...
Currently, It works with eclair, but I think it will also work with froyo, testing soon.
I upload the file in attachment.
Click to expand...
Click to collapse
dude, let me kiss you! this radio fixed my pola100!
I thought my phone was cursed!)
great thanks!))
I'm happy that it helped you all !
Are there any other android on polaris users that have this issue with the radio ?
Maybe it's only for us, users of a POLA100.
I don't pretend to understand everything about it, but should not a newer radio make the calls/camera/data/gps/wifi more efficient ?
Are the chips so different between POLA100 and others ?
try this radio: 1.65.38.14
qleelulu said:
try this radio: 1.65.38.14
Click to expand...
Click to collapse
I sugget:
1. install radio 1.59.46.12
2. hard reset
3. install radio 1.65.38.14
4. hard reset
Everything works fine. Last update greatly improves battery life.
I'm using 1.65.38.14 + Incubus26Jc's Super FroYo RLS10 + haret now.
BUT phone call still dosent work sometimes. Sometimes cant make outgoing call, and cant hung up, and no response when incoming call comes. Have to reset.
Camera works fine.
Before 1.65.38.14 I used to use 1.59.46.12, works fine on wm65, but still the same problem on Android.
Maybe I'm just unlucky.