Hi.
I have a Pola100 and I have tried both the VaniljEclair and the Incubus Froyo builds, with the latest DZO kernel.
The problem is that I cannot make calls, the phone registers the incoming or outgoing call, but there is no sound. Also I have not gotten the camera to work on either of the builds. I've searched around the forum but have not found a solution.
Is this fixable? I can live without the camera, but making calls is kind of usefull
Otherwise Android looks great on my phone, no problem with Wifi, market and it is rather fast.
Thanks in advance.
You don't explain if you are using haret or nand install, which is clearly your version of kernel and rom and if you have put any update. Please add some further information
Sorry, still quite new at this.
I'm using NAND install, did a "task 29" previous to my last flash. Right now I'm using the DZO from 01-07-10 and the Incubus FROYO RLS4.
Tried with the VaniljEclair RLS7b on the same DZO, but with the same result. I have not applied any updates to my current install.
Lacking ability to call and camera with both setups.
Hope this helps
Ok, which is your radio version?
If I have understood correctly the radio version is displayed in the bootloader menu.
I used a Harspl guide I found here on the forum and now it reads
SPL-2.20.OliNex
CPLD-2
Sorry for being a noob
I've got the same problem on a pola 100.
I'm running on nand (just removed WinMo yesterday evening, now I regret ...).
I use incubus26jc rls5 froyo.
I tried the two latest eclair.nbh (modified with the nebh editor to make it to panel 1).
Also, I tried radio version 1.58.21.23 , 1.58.26.20 , 1.64.08.21 .
Just like jolok I have spl-2.20.Olinex and CPLD-2.
My issue is that the sound work befor the 1rst call after rebooting my phone, and a few second after the 1rst call is made (in or out call), se sound stop (or even crash and loops), and then, no more sound on the phone after ending the call.
Also, the camera has a messed up screen, no idea why.
How do you other guys make it work correctly everytime ???
Try to update to the latest froyo version, many issue were fixed
Like I said, I already have incubus26jc rls5 froyo, the latest one ... or is there elsewere an other source for me ?
Just tested, same with incubus26jc eclair ... seams it comes from the radio or the nbh. What should I use ?
Ok, I tried the whole process over again, to see if that would help, but no.
First I did a "task_29", to clear the nand, then I flashed the 02-07-10 DZO .nbh (I edited it to panel 1 with the nbh tool).
Then I flashed the radio rom, I started with Polaris Radio 1.58.21.23 (and worked my way trough all of them)
Finally I installed the Incubus/DZO Froyo 2.2 RLS5.
I have tried alle the radio roms found in the Polaris radio thread;
Polaris Radio 1.58.21.23
Polaris Radio 1.58.25.14
Polaris Radio 1.58.26.20
Polaris Radio 1.64.06.04
Polaris Radio 1.64.08.21
I cannot get the camera to work, it only displays a purple/green/black striped screen and I cannot make calls. The phone registers calls going out and coming in, but there is no sound.
Can anyone help, or explain what I'm doing wrong?
I very new to this and I don't understand how the rest of you get your setups to work
Hey !
I just managed to get my phone work again, with calls and camera !
I found a "old" radio : version 1.59.46.12 .
It is the one I had with WinMo, I think my error was to update it ...
Currently, It works with eclair, but I think it will also work with froyo, testing soon.
I upload the file in attachment.
It works well on incubus26jc froyo rls5 !
I can now again use calls, camera, install apps !
I don't know why only this radio is working on my phone ...
I remember it was the radio I had for a while, it was flashed when I hard-spled my polaris, and I flashed it for 1.64.08.21 when installing froyo, but seams it was a mistake.
Hope it will help you !
Does anybody now why I can only use this radio version ? Does it have a link with the spl version ? (2.20 olinex)
This is great! Tank you very much ReMix3D
The radio fle worked lke a cham for me as well, I can now make calls and even the camera is working.
Calls and camera working in VaniljEclair RL7c
The camera also works in Froyo RLS6, id not test calls, sticking with the Eclair build, seems to gor faster and smoother on my phone.
Thank you so much for the help
I had exacly the same problem. This radio version fixed it.
Thanks a lot!
That is the same Radio version (Polaris_Radio_ROM_1.59.46.12.rar) that pcarvalho recommends in his WinMo 6.5 rom page.
As I was using his rom and thus that radio prior to Android, I guess I just got lucky that this worked so well with Android.
ReMix3D said:
Hey !
I just managed to get my phone work again, with calls and camera !
I found a "old" radio : version 1.59.46.12 .
It is the one I had with WinMo, I think my error was to update it ...
Currently, It works with eclair, but I think it will also work with froyo, testing soon.
I upload the file in attachment.
Click to expand...
Click to collapse
dude, let me kiss you! this radio fixed my pola100!
I thought my phone was cursed!)
great thanks!))
I'm happy that it helped you all !
Are there any other android on polaris users that have this issue with the radio ?
Maybe it's only for us, users of a POLA100.
I don't pretend to understand everything about it, but should not a newer radio make the calls/camera/data/gps/wifi more efficient ?
Are the chips so different between POLA100 and others ?
try this radio: 1.65.38.14
qleelulu said:
try this radio: 1.65.38.14
Click to expand...
Click to collapse
I sugget:
1. install radio 1.59.46.12
2. hard reset
3. install radio 1.65.38.14
4. hard reset
Everything works fine. Last update greatly improves battery life.
I'm using 1.65.38.14 + Incubus26Jc's Super FroYo RLS10 + haret now.
BUT phone call still dosent work sometimes. Sometimes cant make outgoing call, and cant hung up, and no response when incoming call comes. Have to reset.
Camera works fine.
Before 1.65.38.14 I used to use 1.59.46.12, works fine on wm65, but still the same problem on Android.
Maybe I'm just unlucky.
Related
i need to soft reset my phone atleast 3 times a day, depending on how many calls i get. it rings, i answer, i cant hear anything and the other party cant hear me, only way i resolve this is with a soft reset. it did this on the original rom i got with the phone, then i u pgraded to latest original rom, still the same..
now im on udK Syrius R4 - Blackstone Build 20757.1.4.0 - WWE ( must admit i love this rom ) but still the same problem, i have updated to latest radio version too, now im stuck pulling my last 2 strands of hair out with this, any help be much apresicated. thx
on o2 network in uk
I used to experience trouble like this with some custom roms and finally flashed this rom and this radio, and now eveything is back to normal
yer, the problem comes from having a mismatched radio rom and operating system.
I used to have the same problem till I reflashed to the correct radio rom.
Sorry if this is a N00B-Question:
I rooted my fresh Andoid with the follwowing ROMs:
JF 1.51 ADP
JF 1.51 EU
Cyanogen 3.9.7 Exp
and i am running into the exact same Problem all the time:
Both, Bluetooth and Wifi will not activate if I try, and the Screen Orientation Sensor is also not operating.
Sorry for not providing a log, but i needed to reflash Cyanogen 3.9.6 to Post this. 3.9.6 is working as intendet, with the mentioned Maps Bug which is solved in 3.9.7... Yes I wiped all the time, did not Help.
I hope this Bug is known to someone, since I did nothing but flashing some ROMs.
I have a pretty Standard Vodafone Magic CRB43 from Germany (since I am german...) SPL was as expected, i used the crios SPL update.
http://forum.xda-developers.com/showthread.php?t=538633
This version of Cyanogen's 3.9.7 works fine on my Vodafone Magic, also from Germany. Try and see if it works, remember to wipe.
If g-sensor still does not work, remove /data/misc/akmd* /data/misc/rild* in recovery mode.
Thank you!
That is the very Thread i got my 3.9.6 from, but i overlooked the word "port" in the Thread-Title and thought it was the original^^
The new 3.9.7 is working perfectly even without any wipes...
As I expected: How very noobig of me
Solved and can be closed
I just got my phone back from a service, flashed it with CyanogenMod, and I'm noticing a similar issue with the sensors. Is the above instruction to delete those /data/misc/{akmd*,rild*} files the only way to trigger an auto-calibration? What other ways can the sensors be corrected?
Hi,
I've got a little Problem. I bought a Polaris from eBay and now I have my problems with it. When I bought it, there was 3LIT3_V_Full installed. But I wasn't very happy with this ROM, so I flashed some other ROMs.
Afterwards when I tried my first calls with my "new" phone I noticed that the Phone doesn't work properly. Fist call (incoming or outgoing doesn't matter) is no problem, but a second one is not possible. First call (a working one) is always after a 10-minute break and several softresets I think.
Incoming calls let the phone ring but if I want to answer the time begins to count but no one is there. The caller always says afterwards, I would hang up.
Outgoing calls are the same. I call, hav no sound on my phone and if the one I call wants to answer his phone does like I did hang up, while my phone begins to count the time...
Same Problem happend with diverse ROMs. Now I tried the actual original HTC-ROM without of ANY other software and now it works.
So my questions:
What could be the reason? an old Radio Version? perhaps NoData that blocks something? or possibly blocks S2U2 the hang up of the first call and so block further ones?!
does anybody have an idea?!
Please
Whichever rom you want to install "you havent said" just look for the recomended radio for that rom and install that.
I thought each ROM installs its Radio?!
I would prefer the 3LIT3_VII_Full ROM.
Some roms do install radio some don't im not sure about 3LIT3.But on the 3LIT3 thread it say's If you want to change the radio, it must be a 1.59.xx.xx radio.
Hmm ok. This semms to be the problem. After flashing the cooked ROM my Phone says Radioversion 1.58.xxxxxx. the original ROM flashes 1.59.42.15...
so the 3LIT3 ROM flashes an older and possibly not working version of the Radio
So I think I just have to flash the newer Radio after flashing the 3LIT3 ROM.....
Tutorial?!
All I read about changing the radio is: DANGEROUS! not very helpfull
so please can s.o. tell my what I have to do?
where do I find thes new Radios. All I found were version 1.58.xx.xx or before and 2 special 1.64.xx.xx radios...
CustomRUU will only flash your radio it's as safe as flashing a rom.Here's the link for 1.59.42.15 http://rapidshare.com/files/145185172/HTC_Polaris_Radio_1.59.42.15.rar.html.If that doesn't work for you just do a search for polaris radios and try another.
Thank you!
I hope it will work now.
I think it was my fault. Supposable I flashed an other ROM including Radio 1.58.xx before because now i reread the thread about 3Lit3 and I found out that since version VII there is no Radio included...
My fault I hope.
Thanks to all who did help me!
I installed Incubus26Jc's Super FroYo RLS12 All Lang Themed on my POLA100
When connecting to my wifi is says: Obtaining IP adres from wifi, then it stops and then my connection is disabled.
Am I the only one with this problem?
same here, you are not alone
can anyone help us pls?
Same here no IP assigned...no wifi
two simple question:
how do you "install" it?
which radio version do you have?
Same thing happened to me using radio 1.59.44.02 so I flashed radio 1.65.38.14 and voila. GPS works fine as well.
Regards,
Gunner22
I've got the same problem on my Pola200 (XDA Orbit 2), radio 1.59.42.15d3 (original from O2) with the Froyo installations:
- Incubus26Jc's Super FroYo RLS12 All Lang Themed
- VaniljFroyo RLS2
I installed them from SD card with haret.
I also tried VaniljEclair RLS8b: with Eclair it works. But I prefer Froyo because of better performance and design.
I have RLS12 with radio 1.65.38.14 installed on NAND and I am having this problem. (I have also tried one of the 1.59 series radios and it did the same)
I had RLS11 running on SD and wifi was working.
Try to reflash system on nand, sometimes doesn't work correctly and after update radio i suggest to reinstall system.
1.) Reflashed polaimg-panel3-320-froyo-26-07-10.nbh
2.) Reinstalled Incubus26jc's Super Froyo (RLS12)
3.) Tried wifi again... still broken
4.) Restarted then did a reinstall and wipe of data...
5.) Wifi now works!
Thanks!!
Hi!
I have the same problem. I flashed my Pola 100 with the
Polaimg-panel3-320-froyo-26-07-10.nbh and Incubus26Jc's Super FroYo 2.2 RLS12
It's just saying "obtaining IP address".
Then I thought "a radio update couldn't be bad...". So I updated it to Polaris_Radio_1.64.08.21. It still didn't work. Then I read l1qu1d's post:
"Try to reflash system on nand, sometimes doesn't work correctly and after update radio i suggest to reinstall system."
...and reflashed my Pola 100. It still didn't work, so I looked for the newest radio update and updated my phone to Polaris_1.65.38.14.
You'll know the result: Still "obtaining".
I just have no idea anymore. Please help me!
EDIT (2. August): Now I tried Polaris_Radio_1.65.30.09 - still not working - and assigning a static IP to my Pola100 - also not working.
P.S.: Just a question. What's the matter with the PIN code? I know, that I have to deactivate it. But why doesn't it work with our android flashed phones?
@skaterbub2003 reinstall the system. PIN doesn't work because none wrote the kernel part to make it works, there are other priorities.
Well, so let's try it again.
Oh, and thank you for answering my PIN-question. Didn't mean to criticise the work of the coders. I just was curious.
Hi.
My pola100 is stuck on obtaining ip address too.
First, I've installed android on nand, wireless didn't work, so i flashed new radio and wireless still not working.
Finaly i reinstalled android on nand again and stil not working
My rom is Incubus26Jc's Super FroYo RLS12
My radio is Polaris_1.65.38.14
Can anyone help??
(sorry for my english)
As suggested from l1qu1d, I reinstalled the system again (twice). Both times, the problem with "obtaining the IP-Address" remained.
Well, has somebody an idea?
ROM: Incubus26Jc's Super FroYo RLS12 (26/7/2010)
RADIO: Polaris_1.65.38.14
I have the same problem.
RLS11 on NAND: work fine.
RLS12 on NAND: don't work.
any solution?
Ok, i fix that.
The solutions is don't use "install-seq.sh"
ProgMaq said:
Ok, i fix that.
The solutions is don't use "install-seq.sh"
Click to expand...
Click to collapse
Oh my god! I love you! It's working!
Thank you!
skaterbub2003 said:
Oh my god! I love you! It's working!
Thank you!
Click to expand...
Click to collapse
Hehe, no problem, and sorry for my bad english, I'm spanish
I think the problem is in permission, i fix it when i came back to italy.
Hi Guys,
my first post here and hopefully not the last
Got the same problem on my pola200, using the super froyo rls12 with 1.59.46.12 radio.
the other radios i tested didnt let me phone, and i think a phone should be supposed to phone primaly ;-)
Im using the haret boot variant as long it doesnt work right.
As i read u solved the problem, but i dont get a clue out of your hints. What should i use instead of install-seq.sh? Cause if i remove it and try to install the system it just hangs resulting in a scary kernel panic...
Update: Ok, got it now. The phone did boot up so fast that i did had no chance to start the installer, i need to hold the required buttons before the message to push the buttons appears
lets see if it works now
Update 2:Yes, it works! As you thought l1q1d, the problem lies down somewhere in the permissions. Using the "Fix Permission" tool from the Android setup tool did fix the Problem.
hi there,
i am curious to learn from you..
i installed the android with haret and NAND. both types of installation. i tried with all released of android Eclair, Froyo etc..
in both types of installation, the android works very slow and freezing sometimes.
the installation was OK (after reading everything about installation on nand and haret) but still freezing sometimes and working very slow.
could someone tell me if i do something wrong? or we can not use android in our pola 100 as default OS? i really want to use android on my phone..but if work like this..NO THANK YOU.
somebody can give me an answer? or on your phones android work perfectly?
please excuse my english
waiting your answers.
Which radio did you have on the phone?
Are you sure that you have install on nand partition?
Which release did you exactly test?
radio is 1.6 i think and i installed VaniljEclair_RLS11 and i'm sure that i installed in NAND..i tried in bouth ways. yours nevers freezing..or working perfectly?
installed with Atools NBH editor and changed the TGZ in atools
Try one of the latest froyo.
Radio has 3 set of numbers... and all are very important!!
thank you for your answer l1q1d .. i instaled again on SD (haret method) and i installed a new radio version 1.65 and look like working faster..i keeped the eclair because with froyo is slower.
another question, why when i put a ringtone (choosed by me) and somebody calls me appears on the display only after 4 calls on person (i mean he need to stay with phone on his ear and hear 4 ringings to can see myself on the display) if i deactivate the vibration and let a ringtone from android is same thing.... and why on wind mob i have 50% batery and on android i have 100%?
these are my questions.
the radio version is 1.65.38.14
battery need some tuning, charge and recharge...
what do you mean with charge and recharge?..i can not understand..
i really want to use the android OS ..
could you please tell me about calling and answering problems? need some tunning too?
install radio 1.58.21.23. Kernel battery need some charge-discharge cycle to get correct results (without powering off)
l1q1d what can you tell me about answering problem..do you think i can solve the problem with radio 1.58.21.23 ?
i didn't suggest you to try it!!!!
And also use a Froyo distrib
hi l1q1d, i use froyo RLS 16, but i can not use wifi with this version and is same us eclair at calling.
when somebody calls me..i need 4 calls to can see on my screen who calls me.
please tell me if you have this problem..and how to can solve this problem.
please give me an answer.
Did you update the radio and still you have the problem?
Which kernel did you use?
Where you download rls16?
i updated the radio like you told me,
i use karet 2.6.36
and froyo RLS16 from here http://forum.xda-developers.com/showthread.php?t=712310
please tell me what to do to loos that problem with calls...
when i call..everyhing seems to be OK, but when sombeody calls me..i can not see nothing until he rings 4-5 times.
where is the problem
and where can i found a froyo rls16 with working wifi?
i modified the wifi.ko in the archive with one from rls 13 but still nothing.
please help me to solve the problems.
waiting for your answers...
the Haret is 2.6.32 ..sorry for the mistake..not karet 2.6.36
Flash latest kernel and use another distro from kaiser thread
hmmm...l1q1d..please make me understand...
you want to use latest haret that is 2.6.32 and whant to take froyo release from kaiser?
please make me understand...
will solve my problems with answering?
Follow the guide on atools 1.0.4 (download it from my sig) go to help and follow all steps.
The "system" releases are device indipendent so you can take it from Vogue/Polaris/Kaiser thread.
Only nbh or default.txt need to be modified (with atools)
You can use 2.6.25 or 2.6.32.
only 2.6.25 has working camera.
Also flash 1.58.xx.xx radio (look in cruise rom develop)
an with this you tell me that i will solve all problems and can use ANDROID on my poalris?
will be great
i will test it and inform you.
thanks