Hi,
I've got a little Problem. I bought a Polaris from eBay and now I have my problems with it. When I bought it, there was 3LIT3_V_Full installed. But I wasn't very happy with this ROM, so I flashed some other ROMs.
Afterwards when I tried my first calls with my "new" phone I noticed that the Phone doesn't work properly. Fist call (incoming or outgoing doesn't matter) is no problem, but a second one is not possible. First call (a working one) is always after a 10-minute break and several softresets I think.
Incoming calls let the phone ring but if I want to answer the time begins to count but no one is there. The caller always says afterwards, I would hang up.
Outgoing calls are the same. I call, hav no sound on my phone and if the one I call wants to answer his phone does like I did hang up, while my phone begins to count the time...
Same Problem happend with diverse ROMs. Now I tried the actual original HTC-ROM without of ANY other software and now it works.
So my questions:
What could be the reason? an old Radio Version? perhaps NoData that blocks something? or possibly blocks S2U2 the hang up of the first call and so block further ones?!
does anybody have an idea?!
Please
Whichever rom you want to install "you havent said" just look for the recomended radio for that rom and install that.
I thought each ROM installs its Radio?!
I would prefer the 3LIT3_VII_Full ROM.
Some roms do install radio some don't im not sure about 3LIT3.But on the 3LIT3 thread it say's If you want to change the radio, it must be a 1.59.xx.xx radio.
Hmm ok. This semms to be the problem. After flashing the cooked ROM my Phone says Radioversion 1.58.xxxxxx. the original ROM flashes 1.59.42.15...
so the 3LIT3 ROM flashes an older and possibly not working version of the Radio
So I think I just have to flash the newer Radio after flashing the 3LIT3 ROM.....
Tutorial?!
All I read about changing the radio is: DANGEROUS! not very helpfull
so please can s.o. tell my what I have to do?
where do I find thes new Radios. All I found were version 1.58.xx.xx or before and 2 special 1.64.xx.xx radios...
CustomRUU will only flash your radio it's as safe as flashing a rom.Here's the link for 1.59.42.15 http://rapidshare.com/files/145185172/HTC_Polaris_Radio_1.59.42.15.rar.html.If that doesn't work for you just do a search for polaris radios and try another.
Thank you!
I hope it will work now.
I think it was my fault. Supposable I flashed an other ROM including Radio 1.58.xx before because now i reread the thread about 3Lit3 and I found out that since version VII there is no Radio included...
My fault I hope.
Thanks to all who did help me!
Related
Hi there, i'm search all the fourm for Treo750 and find no answer, so finally, I decied to ask.
I new got an Treo750 ATT (Unlocked) and it come with the very rear Radio ROM now which version is 1.17.20.00 (from ROMver 1.16??I don't know)
the problem is, with this radio, i have no internet access and have horriable singal drops, the worest is, it often sleep in to dead(like o2 xda flame).
So, I first tried changed the OS rom, but I flashed all roms all versions--from Offical to wm6.1, no luck...the problem still have.(I kick out the radio rom part from Offical ROM, see below for reason)
I don't know if there is something wrong with the hardware but I do have those steps below:
Flash OS rom, SPL, HardSPL,Radio
ONLY THING THAT I DIDN'T change was the Radio ROM, first I cannot flash it.
it always stucked at 0%, and wait for 45mins, still 0%. I restart the device, reflash the radio less OS rom, startup, and radio don't change, the problem still have....
I tried everything, form offical rom with radio, even the Cheetchunlocker radio patch, SD/ActiveSync. All operation realted to flash the radio will result a hang....
BTW: I'm working in China, and will last for years.... I really have to change the radio to compatible with the China Mobile GSM....
Hey,
Im having problems with my radio ROM (atleast I think its the radio ROM which is the problem).
I have flashed my ROM to Schap's 4.31
I used HardSPL first btw!
The new ROM seems to work fine, except I can't hear people when they ring me, and they can't hear me. And the signal disappears completely sometimes. Also the camera doesn't work.
I had read a good bit before flashing my ROM, so recognised this as most likely being an issue with the Radio ROM.
After some more reading I tired Kaiser Radio 1.65.21.18 and then after some more reading im now on 1.65.16.25 (which the guy in the orange shop today confirmed as the correct ROM for my phone)
And although the issue with the signal seems to have improved if not gone, I still can't hear people, and they cant hear me. Camera still doesn't work.
Am I being a total prat and have missed something noobishly obvious? This is my first WM Phone, and had really tied to read everything so this wouldn't happen!
Any advice would be greatly appreciated.
Cheers,
Keith
This really seems a Radio problem. Try to flash some other radio. It's really quick to flash a new radio so try it some times until you find a good one.
Also, go to the Schap's 4.31 threat and see what SPL and Radio the cooker recomends and the "users" of that ROM using.
Don't forget to read the Ultimate Radio Threat here http://forum.xda-developers.com/showthread.php?t=393182
Your answer you need could be already there and probably you haven't the need to open a new threat.. that I suppose will be closed as soon some mod read it.
Good luck
I'm using the 03-12-08 Hyperdragon Blackstone Build on my Orange UK Tytn II with Radio 1.65.24.36 and cmonex's HardSPL 3.29 and all is perfectly well with mine
Flash a stock rom
If you still get problems try flashing an old stock orange rom from the Wiki and see if that fixes things. The stock roms should have the oem/original radio with them. Hopefully then your'll be able to check if the problem is hardware or software, but it does sound like you need to find a compatible radio.
Schap's 4.31 is WM6 as far as I remember and you are trying to use radio for WM6.1
Try to flash 1.27.12.17
i need to soft reset my phone atleast 3 times a day, depending on how many calls i get. it rings, i answer, i cant hear anything and the other party cant hear me, only way i resolve this is with a soft reset. it did this on the original rom i got with the phone, then i u pgraded to latest original rom, still the same..
now im on udK Syrius R4 - Blackstone Build 20757.1.4.0 - WWE ( must admit i love this rom ) but still the same problem, i have updated to latest radio version too, now im stuck pulling my last 2 strands of hair out with this, any help be much apresicated. thx
on o2 network in uk
I used to experience trouble like this with some custom roms and finally flashed this rom and this radio, and now eveything is back to normal
yer, the problem comes from having a mismatched radio rom and operating system.
I used to have the same problem till I reflashed to the correct radio rom.
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
i was needing this help so much, please help me guys, i tested my chip on another mobile and worked the edge
Be sure to flash Hard SPL before you do anything!!!!!
After you do that, you can go ahead and flash.
If I were you, I'd flash a different radio to see if it works better, I recommend .28, .32, and the .19 test.
If that doesn't work then let us know.
basmareck said:
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
Click to expand...
Click to collapse
I cannot say if your radio is the problem. If you're installing an official HTC or provider ROM, you do not need HardSPL. If you want to install a cooked one here off XDA, you do. This great guide will help you flash a cooked ROM and/or radio: http://forum.xda-developers.com/showthread.php?t=448008
You're right, if you flash a radio, then you will not lose anything in your Storage Memory. If you flash a ROM, you will, so be sure to back up your PIM. PPCPimBackup does a great job for that, you can find it at d0ugie's site: http://blownfuze.org/ Your contacts and calendar should come back right away after the restore, but the messages take a while to rebuild, so don't touch it for at least 15 mins after the reboot.
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
basmareck said:
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
Click to expand...
Click to collapse
By default, you cannot flash anything but an HTC or provider ROM; you cannot flash radios either. You have to flash HardSPL before you flash a custom ROM or a radio.
Have you tried running SSPLManual.exe as outlined in the guide above, step 2 note 2?
Hi.
I have a Pola100 and I have tried both the VaniljEclair and the Incubus Froyo builds, with the latest DZO kernel.
The problem is that I cannot make calls, the phone registers the incoming or outgoing call, but there is no sound. Also I have not gotten the camera to work on either of the builds. I've searched around the forum but have not found a solution.
Is this fixable? I can live without the camera, but making calls is kind of usefull
Otherwise Android looks great on my phone, no problem with Wifi, market and it is rather fast.
Thanks in advance.
You don't explain if you are using haret or nand install, which is clearly your version of kernel and rom and if you have put any update. Please add some further information
Sorry, still quite new at this.
I'm using NAND install, did a "task 29" previous to my last flash. Right now I'm using the DZO from 01-07-10 and the Incubus FROYO RLS4.
Tried with the VaniljEclair RLS7b on the same DZO, but with the same result. I have not applied any updates to my current install.
Lacking ability to call and camera with both setups.
Hope this helps
Ok, which is your radio version?
If I have understood correctly the radio version is displayed in the bootloader menu.
I used a Harspl guide I found here on the forum and now it reads
SPL-2.20.OliNex
CPLD-2
Sorry for being a noob
I've got the same problem on a pola 100.
I'm running on nand (just removed WinMo yesterday evening, now I regret ...).
I use incubus26jc rls5 froyo.
I tried the two latest eclair.nbh (modified with the nebh editor to make it to panel 1).
Also, I tried radio version 1.58.21.23 , 1.58.26.20 , 1.64.08.21 .
Just like jolok I have spl-2.20.Olinex and CPLD-2.
My issue is that the sound work befor the 1rst call after rebooting my phone, and a few second after the 1rst call is made (in or out call), se sound stop (or even crash and loops), and then, no more sound on the phone after ending the call.
Also, the camera has a messed up screen, no idea why.
How do you other guys make it work correctly everytime ???
Try to update to the latest froyo version, many issue were fixed
Like I said, I already have incubus26jc rls5 froyo, the latest one ... or is there elsewere an other source for me ?
Just tested, same with incubus26jc eclair ... seams it comes from the radio or the nbh. What should I use ?
Ok, I tried the whole process over again, to see if that would help, but no.
First I did a "task_29", to clear the nand, then I flashed the 02-07-10 DZO .nbh (I edited it to panel 1 with the nbh tool).
Then I flashed the radio rom, I started with Polaris Radio 1.58.21.23 (and worked my way trough all of them)
Finally I installed the Incubus/DZO Froyo 2.2 RLS5.
I have tried alle the radio roms found in the Polaris radio thread;
Polaris Radio 1.58.21.23
Polaris Radio 1.58.25.14
Polaris Radio 1.58.26.20
Polaris Radio 1.64.06.04
Polaris Radio 1.64.08.21
I cannot get the camera to work, it only displays a purple/green/black striped screen and I cannot make calls. The phone registers calls going out and coming in, but there is no sound.
Can anyone help, or explain what I'm doing wrong?
I very new to this and I don't understand how the rest of you get your setups to work
Hey !
I just managed to get my phone work again, with calls and camera !
I found a "old" radio : version 1.59.46.12 .
It is the one I had with WinMo, I think my error was to update it ...
Currently, It works with eclair, but I think it will also work with froyo, testing soon.
I upload the file in attachment.
It works well on incubus26jc froyo rls5 !
I can now again use calls, camera, install apps !
I don't know why only this radio is working on my phone ...
I remember it was the radio I had for a while, it was flashed when I hard-spled my polaris, and I flashed it for 1.64.08.21 when installing froyo, but seams it was a mistake.
Hope it will help you !
Does anybody now why I can only use this radio version ? Does it have a link with the spl version ? (2.20 olinex)
This is great! Tank you very much ReMix3D
The radio fle worked lke a cham for me as well, I can now make calls and even the camera is working.
Calls and camera working in VaniljEclair RL7c
The camera also works in Froyo RLS6, id not test calls, sticking with the Eclair build, seems to gor faster and smoother on my phone.
Thank you so much for the help
I had exacly the same problem. This radio version fixed it.
Thanks a lot!
That is the same Radio version (Polaris_Radio_ROM_1.59.46.12.rar) that pcarvalho recommends in his WinMo 6.5 rom page.
As I was using his rom and thus that radio prior to Android, I guess I just got lucky that this worked so well with Android.
ReMix3D said:
Hey !
I just managed to get my phone work again, with calls and camera !
I found a "old" radio : version 1.59.46.12 .
It is the one I had with WinMo, I think my error was to update it ...
Currently, It works with eclair, but I think it will also work with froyo, testing soon.
I upload the file in attachment.
Click to expand...
Click to collapse
dude, let me kiss you! this radio fixed my pola100!
I thought my phone was cursed!)
great thanks!))
I'm happy that it helped you all !
Are there any other android on polaris users that have this issue with the radio ?
Maybe it's only for us, users of a POLA100.
I don't pretend to understand everything about it, but should not a newer radio make the calls/camera/data/gps/wifi more efficient ?
Are the chips so different between POLA100 and others ?
try this radio: 1.65.38.14
qleelulu said:
try this radio: 1.65.38.14
Click to expand...
Click to collapse
I sugget:
1. install radio 1.59.46.12
2. hard reset
3. install radio 1.65.38.14
4. hard reset
Everything works fine. Last update greatly improves battery life.
I'm using 1.65.38.14 + Incubus26Jc's Super FroYo RLS10 + haret now.
BUT phone call still dosent work sometimes. Sometimes cant make outgoing call, and cant hung up, and no response when incoming call comes. Have to reset.
Camera works fine.
Before 1.65.38.14 I used to use 1.59.46.12, works fine on wm65, but still the same problem on Android.
Maybe I'm just unlucky.