hi xda,
i installed the new kernel 1.1.1 from this treat http://forum.xda-developers.com/showthread.php?t=2615010
and im on CM 11
and yes, after flashing i did a Cache wipe
then i wanted to test BLN *free* and the app says " active" but when i run a test, nothing happens....
did i something wrong ???
PS: i flashed kernel 1.2 Phone crashed at enableing PIN
THX for help!
Hobi
I've got the same issue with kernel, even with newest version.
As I'm actually having sub10 posts, I'm not able to write in the original thread directly.
Is there any other Kernel ot there for 9105 stock roms with BLN support?
how to...
Has anybody using this kernel on stock ROM a short introduction how to get BLN working?
I already copied the mentioned capri.lights.so to the given folder and restarted the phone, but it still doesn't work.
What else do I have to change to get it work?
The app ButtonLED works, but I would to use BLN.
Best regards
Related
this is a kernel that i compiled direct from toast's HTC-Supersonic-2.6.29 source. toast and netarchy all put in their fixes and enhancements so i take no credit but altering the kernel that netarchy posted in this http://forum.xda-developers.com/showthread.php?t=719763 thread.
this is based off his 3.7.1 kernel that enables around 55-57 fps on both epson and novatek screens. Like he said, it disables the HDMI so if you need that, don't use this. in fact, this kernel will have all the issues that netarchy's 3.6.2 might have, but the touchscreen does work and you should still get ~55 fps average on fps2d.
this means that the kernel also comes with overclock and undervolt, compcache modules, audio boost and everything.
the kernel that's included is only compatible with ClockworkMod recoveries, sorry for those who use Amon_RA! i can't seem to make a working boot.img, and koush's way of updating kernels also is a lot easier to use
i highly highly doubt this has the possibility to break your phone but if it somehow does, i don't take responsibility.
once again, all credit goes to netarchy, toast, and all other people who i may have missed.
if you're using this kernel and get around 40 or so frames per second, here's probably the best thing to do. go to setCPU into the Advanced tab, and set the Up threshold to a value between 65-75. I chose 65 and i consistently get 55-57 average with stdev of 4 or 5.
edit: i just compiled a new kernel straight from Netarchy's sources, as he says that he updates his to the latest at all times. so, the new version is 3.6.4, because that's what his is. remember, this is exactly the same as his kernel, except that i just modified something to make it work for Froyo ROMs.
enjoy!!
edit: wifi does work, i think it's just that for some people who are flashing it over a ROM it might not work. I re-flashed evolution v9 and wi-fi worked again
using amon ra 1.7.0.1 i got
E: Missing file:
system/lib/modules/bcm4329.ko
E: verification failed
Installation aborted
this DOES NOT work.... but thanks for playing
scooter185 said:
using amon ra 1.7.0.1 i got
E: Missing file:
system/lib/modules/bcm4329.ko
E: verification failed
Installation aborted
Click to expand...
Click to collapse
yeah i doubt it works on amon ra, cause it's something made for clockworkmod. could you flash clockworkmod and then try this kernel, and tell me if it works?
btw, the bcm4329 appears because i found a kernel that i could use so i just replaced the zImage inside it. the original one was supposed to put the bcm4329 in /system/lib but i took it out cause it wasn't necessary.
will this work on the froyo sense rom?
infamousjax said:
this DOES NOT work.... but thanks for playing
Click to expand...
Click to collapse
could you please explain a bit more what's not working?
http://www.failhorn.com/
Wow... brutal guys.
look, guys.
i'm not trying to trick you guys. why don't you guys tell me what's wrong instead of telling me "fail" and giving me some stupid crap like failhorn.com
it works 100% fine on my phone, running EVOlaunchv9 froyo. so why don't you tell me what's not working and NOT be douches about it?
Douches.
Thanks for making this, man. I've been waiting for this kernel to support Froyo. Works great so far. Only thing is Wifi Tether isn't working, despite trying to reflash the fix from ffolkes thread. Might have something to do with clockwork recovery, though.
warmthsound said:
Douches.
Thanks for making this, man. I've been waiting for this kernel to support Froyo. Works great so far. Only thing is Wifi Tether isn't working, despite trying to reflash the fix from ffolkes thread. Might have something to do with clockwork recovery, though.
Click to expand...
Click to collapse
thanks. yeah i just noticed that wifi in general isn't working... and i can't figure it out. there might be something else i missed... but i'll keep looking.
thanks I'll load this up later when I flash my froyo build again.
justinisyoung said:
thanks. yeah i just noticed that wifi in general isn't working... and i can't figure it out. there might be something else i missed... but i'll keep looking.
Click to expand...
Click to collapse
Can you not use that patch that is in the Nova FPS kernel thread for the 802.11 N and 4G. Just a thought, when I flashed to the kernel in that thread I lost my wireless too and then i flashed that patch and it started working again. I am new to this game, sounds logical to me lol.
Worked great on my phone, running Damage Control's newest. The only thing is that I had 5 points of touch with the kernel just for the novatek screen and 44fps. With this kernel I only had 3 points of touch and only 41fps. Still good work, dont let those other guys get you down. Thanks
Noticed this is based off 3.6.2
Maybe the wifi problem will go away if 3.6.3 is used instead. Looks like the audio boost patch was removed as it was causing problems with bluetooth, and no fluffy pink bunnies were harmed in the making of 3.6.3 so its peta approved
I had 5 touch points using Dotty on ffolkes kernel.. Only got two with this one.
Sent using the power of swype.
good god there are some real ******** on this board as of late !
op thx for the work when i flash a 2.2 ill give it a shot
Way to show this Guy support you tools!!!!!!!!
tried it running evolution v9. everything worked great except for wifi which was already stated. appreciate the work you've done. thx
when i get home from work i'll see if i can build the kernel again. it might be 3.6.3-based if netarchy and toast updated the kernel source on github, but otherwise we'll be stuck with this one till they do so.
sorry about the wifi guys, i spent a few hours and i could not get it to work. but if you flash the wifi/4g fix on ffolkes's kernel's page (the link is on the first post), you'll get wifi tether working at least
I Know this should be in the Developer section, but I don't have enough posts. (Since you have to have at least 10 to do so...)
BUT, I installed a kernel from Blades which is the 1.6ghz with the latest version of CWM. The problem is that whenever I try to boot up the device it just stays on the first startup screen, and it also makes a weird popping noise from the speakers about every 10 seconds. I did wipe Dalvik Cache and I also made a back up before installing the new kernel. I've tried restoring but it does the same thing every time. Before installing the kernel I was running PRIMEORDIAL! v3.1...
Any help would be greatly appreciated....
Thanks
cdp
Hi Mate, You are not the only one. Unfortuantely 3.0.1 kernels don't work too well with 3.1 roms as you have discovered.
Not to worry though as this is an easy fix.
Simply flash the 3.1 stock kernel and you're up and running again. You can get it from here... http://forum.xda-developers.com/showpost.php?p=14283676&postcount=94
Wow, I didn't even realize that kernel was only for 3.0.1 lol. THANK YOU! Flashed it and it started right up! C:
You may now have wifi problems, since the kernel update will have installed a different module to the one you need, if this is the case just reflash whatever rom you are using.
Okay cool, I'm on wifi now and it seems to be working fine. So thanks again! :]
Dear XDA-Devs and Community,
I've recently installed DooMKernel v06 (Unlocked BL),but there are still WiFi-Errors.
In detailes,I unlocked my bootloader (downloaded S1Tool to ensure it.)Then,I flashed DooMKernel v06 Max Overclocked [Exact file name: X10_2.3.3_DooMKernel-v06-BootManager-v2.0.ftf] version (FOR STOCK ROMs) ,everything worked perfectly,except the WiFi.
I installed the v06 wifi modules right below the ftf. (FOR STOCK ROMs TOO) file,through xrecovery.[Exact file name: x10_gb_DooMKernel-v06_wifi.zip]
It didn't work,so I used Module Loader.It didn't work again.I re-flashed the DooMKernel ftf file and then the wifi modules again.Still,nothing.
These are the phone info:
Version: 2.3.3
Baseband 2.1.71
Kernel: [email protected]
3.0.1.G.0.75 (Isn't that the stock one?)
So here's the basic Q:
1)According to my phone info,am I using wrong Kernel and modules?
2)Can't those modules be installed through xrecovery?Only via CWM recovery?If yes,could somebody provide me with info on how to SAFELY uninstall xrecovery and then install CWM Recovery?
3)Is the problem something else that I've missed?What am I doing wrong?
Thank you very much in advance.
I'm using medium overclock kernel and wifi modules which works perfectly for me :/
You sure you flashed the right wifi modules (ie, the ones for the max overclock) ?
In any case, try the medium overclock kernel and modules and see if it works, the max one is known to cause some problems
Sent from my GT-P7510 using XDA Premium HD app
Well I've installed the modules right below the kernel I installed..And everything else seems to work fine.Except the WiFi..So I don't think I've installed wrong kernel.
Uh,if there's no other solution,I'll flash medium overclock and its modules..
Well if you installed all the right things, I'd say the max overclock kernel has issues with your device
Now I don't have that much of knowledge on that yet but I'd say give a shot to the medium one and see if it works
Sent from my GT-P7510 using XDA Premium HD app
I've flashed Medium OverClocked version,the wifi modules right below,but still nothing...
What could the problem be?..Am I missing a step or something?
EDIT: PROBLEM SOLVED.I HAD TO WIPE THE DALVIK CACHE AGAIN.THEN I REFLASH KERNEL AND MODULES AND IT'S WORKING PEFECT.
Thank you.
same x1- wifi problem after Kernel flash, not solved, please help
Dear all,
I have the same Wifi error issue, after installing new Kernel and Wifi:
X10_2.3.3_DooMKernel-v06-1113-BootManager-v2.0.ftf
x10_gb_DooMKernel-v06-1113_wifi.zip
Have tried everything I could find, e.g. clearing cache, Dalvik cache, reinstalling, rebooting etc.
All works well but the Wifi does not. I had the same problem when installing the Feralab Kernel.
Even installing the stock Wifi (apparently) modules from another threat did not work:
x10_gb_stock_wifi_modules.zip
Before I did all this, I rooted the X10 successfully, installed an unlocked bootloader with flashtool and everything went swimmingly well; once I removed all the bloatware, it was really fast. I am running the stock rom still. Should have left the Kernel alone!
Any suggestions or leads to pertinent threads would be much appreciated, please help.
Cheers,
Dirk
Wifi not working
When turn on it shows "error"
any one pls help
thanks in advance !
hey guyz
i want to overclock my asus tf101
i am running Revolver 421 based with android version 4.03
tried using Clemsyn-Blades from http://www.youtube.com/watch?v=mKP0sJxHM3I and it was a failure cuz the version i used was not meant for android 3. something.
so please can someone provide me with some current overclock tools.
would be realy helpfull guyz,
thnx
Flash KatKiss (Android KitKat 4.4.2) and it has the overclockable Kernel and Overclock settings built in
http://forum.xda-developers.com/showthread.php?t=2592890
Make sure you are running TWRP Recovery before flashing KatKiss ROMs or JellyBean ROMs though
*Detection* said:
Flash KatKiss (Android KitKat 4.4.2) and it has the overclockable Kernel and Overclock settings built in
http://forum.xda-developers.com/showthread.php?t=2592890
Make sure you are running TWRP Recovery before flashing KatKiss ROMs or JellyBean ROMs though
Click to expand...
Click to collapse
thnx for the replay but i dont see this as a solution, i just want to have revolver rom but with a overclockable possibilities, i already tried katkiss and i dont like it.
i tried to flash this kernel http://forum.xda-developers.com/showthread.php?t=1565519 V22.6 and was able to overclock with succes but usb mount wont work.
each time i plug in the tf101 in my laptop, i get a notifcation on my tablet (USB debuging conected) when i unselect this through the seting menu, nothing happens.
anny solution ? i also tried V21 but the same problem with usb mount
abati said:
thnx for the replay but i dont see this as a solution, i just want to have revolver rom but with a overclockable possibilities, i already tried katkiss and i dont like it.
Click to expand...
Click to collapse
If the ROM doesn't come with an overclockable kernel already, you'll have to find a compatible one
Once you have the correct Kernel installed, grab SetCPU or similar from Google Play to overclock the CPU
Those ROMs are so old now I don't know which ones contain OC kernels and which ones don't, which was why I suggested KatKiss
Check the ROMs main thread for what is included / which Kernel it contains
abati said:
i tried to flash this kernel http://forum.xda-developers.com/showthread.php?t=1565519 V22.6 and was able to overclock with succes but usb mount wont work.
each time i plug in the tf101 in my laptop, i get a notifcation on my tablet (USB debuging conected) when i unselect this through the seting menu, nothing happens.
anny solution ? i also tried V21 but the same problem with usb mount
Click to expand...
Click to collapse
No idea about the USB problem, maybe is an issue with the ROM / Kernel you've flashed - these ROMs don't have much / any support now
If you want to keep using it, then your best bet is to start reading through that ROMs thread and see if there is a solution in there or hope that someone else can remember / or is still using the same ROM
yeah i dont think it has to do something with how old that rom is, cuz i know revolver did allot of updates to ensure quality roms, and from the kernel link i shared there was a guy who was on revolver 1.3.1 who did not have any problems at all on the first page at the bottom you can read that.
everything works fine for me like the wifi, charging except the mounting of the device to a pc -_-
I mean because of the age of the ROM, you're going to struggle to find any answers to problems you have with it
Hi guys, I'm fckland and I'm relatively new here since I never write but I always come here when I need something
This time I come here with a doubt. I got the motorola xt1032 and it's awesome, I have unlocked the bootloader and rooted it and installed CWM to flash some ROM's, but they didn't worked and bricked my phone, so I had to install google play edition by fastboot (following this guide: http://forum.xda-developers.com/showthread.php?t=2542219 ) and now when I hit "install zip from sdcard" it says: e:\ can't mount sdcard
I want to access that option to install the faux kernel to test it but i can't. What can I do to fix it? I have searched and I didn't find nothin specific for the motorola moto G.
While I was writing this, I installed the TWRP and it worked! I had access to the internal memory without any issue!
BUT I HAD AN ISSUE
I installed the faux kernel with the OC to 1.6GHz and it bricked the OS (google play edition) (stuck at bootanimation), I installed the other version, the non OC and it bricked too and I had to do the tutorial once again since i didn't do a backup
And my second question is... Why this moto g doesn't accept most ROM's and kernels? I have tried with ROM: Carbon, AOSP, MOKEE and none worked and Kernels: faux version u and m and none worked, all of them bricked my phone.
If you need details of the version of my phone or something please ask for it and I'll upload it.
Thank you very much.
Nobody? I need to know at least why I can't install ROM's without having lots of issues.
Post details.
Please post details of which recovery you are using to flash ROMs, which kernel you are on and lastly which ROM works fine and which doesn't.
I, personally think you might had been on philz recovery and issue is not only which /sdcard but with /data.
Post the required info and I'll get back to you.
Problem solved!
I don't know what the problem was, but I think that I wasn't formating well after installing ROM's.
I have installed CM11 minutes ago and it works really nice (with wifi, I didn't try 3G yet) but I have a stock kernell and I would love to install faux or pink kernell, how do I have to do exactly to install one of them? And what can I do if i get bootloop?
Thank you!
Stick with the original kernel.
fckland said:
Problem solved!
I don't know what the problem was, but I think that I wasn't formating well after installing ROM's.
I have installed CM11 minutes ago and it works really nice (with wifi, I didn't try 3G yet) but I have a stock kernell and I would love to install faux or pink kernell, how do I have to do exactly to install one of them? And what can I do if i get bootloop?
Thank you!
Click to expand...
Click to collapse
It's nice that your problem is resolved. And for the kernel as far as I know faux and pink support only stock ROM, no support for CM11 yet. You can search the thread for any other kernel but I would recommend to stick to default kernel now. Moto G is still under huge development, have patience. Soon we'll have a lot of them.
Regarding bootloops, take care that before installing any Rom you format /system along with wipe cache and data. Mount them again and then flash the rom.If any other help needed then post it.
P.S. No need to say Thanks press Thank you instead.
fckland said:
Problem solved!
I don't know what the problem was, but I think that I wasn't formating well after installing ROM's.
I have installed CM11 minutes ago and it works really nice (with wifi, I didn't try 3G yet) but I have a stock kernell and I would love to install faux or pink kernell, how do I have to do exactly to install one of them? And what can I do if i get bootloop?
Thank you!
Click to expand...
Click to collapse
i had also same problem with my moto g...
just u guide me how u solve this problem....?
im unable to instal stock, CWM, and TWRP recovery mode on it... Except philz_touch_6.41.6-moto_falcon..
plz help me
vardhanram said:
i had also same problem with my moto g...
just u guide me how u solve this problem....?
im unable to instal stock, CWM, and TWRP recovery mode on it... Except philz_touch_6.41.6-moto_falcon..
plz help me
Click to expand...
Click to collapse
Why you can't?