Brand new Thunderbolt, I did have it rooted but just factory reset it, I no longer have root. I hold down the power button and BOTH volume arrows and get into the screen for recovery, when I go to it it gives me a black screen with a pic of a phone in the middle with a red triangle and a red exclamation mark over top the phone.
I want to root and get a new kernel but think it would not be smart to proceed until I fix this problem. Jeesh, had it less than 12 hours and broke it already haha.
So, how do I get it to let me in there so I can make a nandroid backup?
I'm pretty certain you need to be rooted to access recovery.
Well, last night when I WAS rooted I tried it and it didn't work either. Well, I will try that tonight around 5PM EST and let you know if rooting allows me in. Honestly, I factory reset the phone after I rooted it because I thought the way I rooted it messed it up. Now I am thinking that is not true.
You have to be rooted to get into recovery. Also, and I am not 100% sure about this, if you did a factory re-set and didnt re-root and then reinstall CWR then there wont be a recovery for you to access.
You're looking at the stock recovery. You need to reroot and flash CWM to be able to install custom zips.
Sent from my Thunderbolt.
theincrediblenoob said:
Brand new Thunderbolt, I did have it rooted but just factory reset it, I no longer have root. I hold down the power button and BOTH volume arrows and get into the screen for recovery, when I go to it it gives me a black screen with a pic of a phone in the middle with a red triangle and a red exclamation mark over top the phone.
I want to root and get a new kernel but think it would not be smart to proceed until I fix this problem. Jeesh, had it less than 12 hours and broke it already haha.
So, how do I get it to let me in there so I can make a nandroid backup?
Click to expand...
Click to collapse
A factory reset shouldn't cause you to lose root. That just wipes data/cache. I would return to stock, root again and go from there. There's a thread in the development section on how to return to stock.
Did you flash CWM after rooting??? You can't do **** without that.
Ok, here is what I did, i took a factory thunderbolt and followed all the directions on this link.
http://www.thunderboltforums.com/fo.../1233-rs-guide-how-root-your-thunderbolt.html
Then, I downloaded rom manager and busybox and was about to try and install a kernal. I wanted to make a nandroid back up and thats when I noticed this problem. I also think I lost my 3g access then too. So, I went to factory reset and then tested the root checker app and it said I had NO ROOT.
I am rather noobish so please make the directions on how to fix this simple HAHA. I am also wondering if the link above has good root instructions and how would I install a kernel on the thunderbolt? Even a link to a thunderbolt kernel thread would be sweet!! THanks!!
I will wait for someone to let me know if that link is any good before I root with it again.
dbisch said:
A factory reset shouldn't cause you to lose root. That just wipes data/cache. I would return to stock, root again and go from there. There's a thread in the development section on how to return to stock.
Did you flash CWM after rooting??? You can't do **** without that.
Click to expand...
Click to collapse
Honestly, idk what that is.. Sry, the only other phone i rooted was my incredible through the one step Unrevoked method.
I think the directions in the link above might have missed something that a noob like me would not have picked up on. Something you guys prolly would have known right away.
Go to xda Tbolt dev section, find the root how-to thread and re-root
Sent from my ADR6400L using XDA App
theincrediblenoob said:
Honestly, idk what that is.. Sry, the only other phone i rooted was my incredible through the one step Unrevoked method.
I think the directions in the link above might have missed something that a noob like me would not have picked up on. Something you guys prolly would have known right away.
Click to expand...
Click to collapse
CMW is ClockworkMod Recovery. It's the recovery you flash in ROM Manager.
Follow this thread for rooting. There's a few other methods in the development section that have scripts so you don't have to manually push through ABD. Doing it yourself is more fail safe though and also a good learning experience.
http://forum.xda-developers.com/showthread.php?t=996616
dbisch said:
CMW is ClockworkMod Recovery. It's the recovery you flash in ROM Manager.
Follow this thread for rooting. There's a few other methods in the development section that have scripts so you don't have to manually push through ABD. Doing it yourself is more fail safe though and also a good learning experience.
http://forum.xda-developers.com/showthread.php?t=996616
Click to expand...
Click to collapse
What about the link in my original post that I used to root? Any good?
theincrediblenoob said:
Then, I downloaded rom manager and busybox
Click to expand...
Click to collapse
Downloading Rom Manager is NOT installing custom recovery but a way to do so.
Once RM is installed open it up & choose Flash ClockworkMod Recovery. That will install the latest recovery from which you can run backups and such.
feedhead said:
Downloading Rom Manager is NOT installing custom recovery but a way to do so.
Once RM is installed open it up & choose Flash ClockworkMod Recovery. That will install the latest recovery from which you can run backups and such.
Click to expand...
Click to collapse
See, now when I did my incredible I never even downloaded rom manager. I don't even know what it really does. I thought I held up and power when turning on to get into the menu and I was able to make the nandroid backup from that menu somewhere?
dbisch said:
A factory reset shouldn't cause you to lose root. That just wipes data/cache. I would return to stock, root again and go from there. There's a thread in the development section on how to return to stock.
Did you flash CWM after rooting??? You can't do **** without that.
Click to expand...
Click to collapse
What do you mean exactly by flashing CWM ? I just followed the instructions that the link gave me to do. If you wanna check it out i included the below
http://www.thunderboltforums.com/fo.../1233-rs-guide-how-root-your-thunderbolt.html
So... Just my 2 cents. You said you downloaded clockworks and busy box, but I never saw you reference super user. That should have been download number 1 after root. Without that, you're not doing anything.
bking_soda said:
So... Just my 2 cents. You said you downloaded clockworks and busy box, but I never saw you reference super user. That should have been download number 1 after root. Without that, you're not doing anything.
Click to expand...
Click to collapse
Yes, I did get that one too. I just rerooted it and now I am looking at the main screen in the rom manager again. What should I do? I do not have busy box, I have rom manager, superuser and root access. I keep hearing something about flashing clockworkrecovery next?? Like does that mean just click on the box in rom manager?
theincrediblenoob said:
I keep hearing something about flashing clockworkrecovery next?? Like does that mean just click on the box in rom manager?
Click to expand...
Click to collapse
In ROM Manager if you select "Flash ClockworkMod Recovery", Rom Manager will do just that.
It will flash your recovery.
MePascal said:
In ROM Manager if you select "Flash ClockworkMod Recovery", Rom Manager will do just that.
It will flash your recovery.
Click to expand...
Click to collapse
Ok I guess I am not fully understanding this. What does it really mean to "flash" your "recovery"?
Does this mean to make a copy of your current phone, like a nandroid backup? Or does it mean to access a copy you have already made and revert your system to that prior copy? Or am I wrong on both?
theincrediblenoob said:
Ok I guess I am not fully understanding this. What does it really mean to "flash" your "recovery"?
Does this mean to make a copy of your current phone, like a nandroid backup? Or does it mean to access a copy you have already made and revert your system to that prior copy? Or am I wrong on both?
Click to expand...
Click to collapse
The answer to your first question of the first link being any good...that would be a big NO. Your phone never rooted from the start due to faulty directions posted. As far as flashing a recovery from clockworkmod that basically means when you need to get to the recovery screen this is the program that will bring you there with the understanding that you flash the recovery. NOW to do that there is an option at the top of the screen which says
" Flash ClockworkMod Recovery "
Latest Recovery: ClockworkMod 3.0.2.5
Once you flash it will show this:
Flash CLockworkMod Recovery
Current Recovery: ClockworkMod 3.0.3.5
Latest Recovery: ClockworkMod 3.0.2.5
TO FLASH YOU SIMPLY SELECT THIS BOX AND IT WILL BRING UP A SCREEN TO CONFIRM PHONE MODEL AND THEN WILL ASK FOR SUPERUSER PERMISSION WHICH YOU MUST GRANT ACCESS TO AT ALL TIMES.
KDKobes said:
The answer to your first question of the first link being any good...that would be a big NO. Your phone never rooted from the start due to faulty directions posted. As far as flashing a recovery from clockworkmod that basically means when you need to get to the recovery screen this is the program that will bring you there with the understanding that you flash the recovery. NOW to do that there is an option at the top of the screen which says
" Flash ClockworkMod Recovery "
Latest Recovery: ClockworkMod 3.0.2.5
Once you flash it will show this:
Flash CLockworkMod Recovery
Current Recovery: ClockworkMod 3.0.3.5
Latest Recovery: ClockworkMod 3.0.2.5
TO FLASH YOU SIMPLY SELECT THIS BOX AND IT WILL BRING UP A SCREEN TO CONFIRM PHONE MODEL AND THEN WILL ASK FOR SUPERUSER PERMISSION WHICH YOU MUST GRANT ACCESS TO AT ALL TIMES.
Click to expand...
Click to collapse
What is wrong with the link above?? I used it last night to root the phone and according to root checker I have root... I am not second guessing you, I am just wanting to know what is wrong with it so I can fix the wrong or add the missed steps so I dont have issues.
Related
I rooted according the directions found here: http://www.droidfiles.us/nexus-s-4g/root-nexus-s-4g/ after getting a new Nexus S 4G.
Even after locking the bootloader. It goes to the Android-with-box then to the Exclaimation-point-inside triangle. When I volume-up and power-button from that screen, an "Android Recovery <3e>" comes up...
Does anyone know what might be going on? And how do I get my custom recovery to stick?
Well, that's my post, so ill try to help. First, and don't take this the wrong way, but did you follow those instructions to a T? When you boot into bootloader, your pushing CWM to you phone with the fastboot command?
Sent from my Nexus S 4G using XDA App
mikeyinid said:
Well, that's my post, so ill try to help. First, and don't take this the wrong way, but did you follow those instructions to a T? When you boot into bootloader, your pushing CWM to you phone with the fastboot command?
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
No offense taken...it's a valid questions since humans have trouble following directions.
To answer your Q, yes, I followed it to a tee. I'm going to retry now...from scratch. Gonna load the stock imgs and go from the beginning...
TonyArmstrong said:
No offense taken...it's a valid questions since humans have trouble following directions.
To answer your Q, yes, I followed it to a tee. I'm going to retry now...from scratch. Gonna load the stock imgs and go from the beginning...
Click to expand...
Click to collapse
Apparently alot of people have this issue, me included. I seen some posts about using root explorer to change the name of the recovery image if it shows up in system /ext. Sounds crazy but I hear it doesn't show up on all phone's. IV come to terms with having to fastboot every time I flash but I'd love to see a fix. Have you tried Amons recovery?
TonyArmstrong said:
No offense taken...it's a valid questions since humans have trouble following directions.
To answer your Q, yes, I followed it to a tee. I'm going to retry now...from scratch. Gonna load the stock imgs and go from the beginning...
Click to expand...
Click to collapse
Have you flashed recovery through Rommanager when your phone boots up?
You have to flash a non-stock kernel, the recovery gets overwritten on reboot. So if you flash CWM and reboot without flashing a custom kernel you will be back to stock recovery.
Edit: oops maybe I was wrong lol, maybe it isnt the kernel. im assuming you flashed the recovery in fastboot?
mbh87 said:
You have to flash a non-stock kernel, the recovery gets overwritten on reboot. So if you flash CWM and reboot without flashing a custom kernel you will be back to stock recovery.
Edit: oops maybe I was wrong lol, maybe it isnt the kernel. im assuming you flashed the recovery in fastboot?
Click to expand...
Click to collapse
No, I dont think your wrong bro. It makes sense. Ill test your theory soon.
Tony, when you push CWM, are you able to boot into recovery by hitting volume down twice to recovery and hitting power? If so, I suggest you flash this ROM. Its stock rooted and you will not have problems with CWM sticking. You dont even have to wipe to flash it...
I've read on some methods for rooting that there is a file /system/etc/install-recovery.sh (or something like that, should be able to find it by mounting system in recovery and adb shell ls /system/etc then using adb shell rm -r /system/etc/install-recovery.sh).
Though after I fastboot flashed the recovery, booted into recovery, did a nandroid, I formatted /system before I flashed CM7, so that would've killed the file anyways.
david1171 said:
I've read on some methods for rooting that there is a file /system/etc/install-recovery.sh (or something like that, should be able to find it by mounting system in recovery and adb shell ls /system/etc then using adb shell rm -r /system/etc/install-recovery.sh).
Though after I fastboot flashed the recovery, booted into recovery, did a nandroid, I formatted /system before I flashed CM7, so that would've killed the file anyways.
Click to expand...
Click to collapse
I just had CWM, never had any issues. Im not sure what dictates whether that file is there or not. Im guessing that since tony is so quiet though he got it figured out..
whats amazing is i dont have this script and its one of the things holding the one click up :x
also its part of init.rc so technically a new kernel would.. in theory wipe that out...
mikeyinid said:
Have you flashed recovery through Rommanager when your phone boots up?
Click to expand...
Click to collapse
I did flash CWM through Rom Manager. That didn't work the first few times. It stalled...
mikeyinid said:
Tony, when you push CWM, are you able to boot into recovery by hitting volume down twice to recovery and hitting power? If so, I suggest you flash this ROM. Its stock rooted and you will not have problems with CWM sticking. You dont even have to wipe to flash it...
Click to expand...
Click to collapse
I got it to stick -- or at least i thought I had it. I followed the initial instructions provided in a previous thread. And per the instructions, I download Rom Manager and I installed CWM through it (again).
I'm going to wipe my phone fully -- reinstall the base 2.3.4 with the the stock recovery, via the IMG files for GRJ22 and start over...See what happens then.
Wait, I'm confused. Why would you flash stock images when your already stock? If you follow the instructions in the link you posted in the op there is no reason you shouldn't be rooted. Have you actually even booted into recovery?
TonyArmstrong said:
I got it to stick -- or at least i thought I had it. I followed the initial instructions provided in a previous thread. And per the instructions, I download Rom Manager and I installed CWM through it (again).
I'm going to wipe my phone fully -- reinstall the base 2.3.4 with the the stock recovery, via the IMG files for GRJ22 and start over...See what happens then.
Click to expand...
Click to collapse
Sent from my Nexus S 4G using XDA App
I realllyyy don't suggest flashing a recovery with rom manager. I'm not bashing ROM Manager, I'm a paid user, but the way that it flashes recoveries is unsafe. I've had it almost brick my Evo and I've seen it brick other phones.
Just use fastboot... if you can't get that working, you probably shouldn't be messing with the phone.
mikeyinid said:
Wait, I'm confused. Why would you flash stock images when your already stock? If you follow the instructions in the link you posted in the op there is no reason you shouldn't be rooted. Have you actually even booted into recovery?
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
I'm rooted successfully. I feel more comfortable (with recovery acting flaky) with unrooting and starting over from scratch...
Call me kooky, but a bone-stock unrooted phone with no user data, no nothing, is how I got it, so why not return it to that state and start over. That's the only way I know to insure that whatever I do is not influenced by any data, bad file permissions, etc. that could hose rooting and installing recovery.
TonyArmstrong said:
I'm rooted successfully. I feel more comfortable (with recovery acting flaky) with unrooting and starting over from scratch...
Call me kooky, but a bone-stock unrooted phone with no user data, no nothing, is how I got it, so why not return it to that state and start over. That's the only way I know to insure that whatever I do is not influenced by any data, bad file permissions, etc. that could hose rooting and installing recovery.
Click to expand...
Click to collapse
OCD, I know the feeling lol. What got it to stick?
derekwilkinson said:
I realllyyy don't suggest flashing a recovery with rom manager. I'm not bashing ROM Manager, I'm a paid user, but the way that it flashes recoveries is unsafe. I've had it almost brick my Evo and I've seen it brick other phones.
Just use fastboot... if you can't get that working, you probably shouldn't be messing with the phone.
Click to expand...
Click to collapse
I used fastboot to install CWM initially (fastboot flash recovery recovery-xxxxx.zip -- can't remember the filename right now). The directions for rooting the NS4G state explicitly to use ROM Manager to flash the recovery to "make sure it sticks" after initially pushing it to the phone via fastboot.
It's obviously a hack, but apparently it works more often than it fails.
I'm a paid user of ROM Manager as well. I have to admit, it was fine to flash Amon Ra to my Evo. Since I'm new(er) to the NS4G, I'm going to defer to those with more expertise and follow the directions given.
TonyArmstrong said:
I used fastboot to install CWM initially (fastboot flash recovery recovery-xxxxx.zip -- can't remember the filename right now). The directions for rooting the NS4G state explicitly to use ROM Manager to flash the recovery to "make sure it sticks" after initially pushing it to the phone via fastboot.
It's obviously a hack, but apparently it works more often than it fails.
I'm a paid user of ROM Manager as well. I have to admit, it was fine to flash Amon Ra to my Evo. Since I'm new(er) to the NS4G, I'm going to defer to those with more expertise and follow the directions given.
Click to expand...
Click to collapse
well the "make sure it sticks" flashing with rom manager doesn't make any sense. the only way the recovery would be overwritten is if the ROM you flash over writes it or in fastboot
mikeyinid said:
OCD, I know the feeling lol. What got it to stick?
Click to expand...
Click to collapse
Yeah, I'm very anal when it comes to this kind of stuff...I was a developer for a little bit (Java middleware, then on to the front-end stuff) where regression testing was important. Sometimes, it's best to reload things piece by piece to see what breaks what. Then go from there.
I haven't gotten it to stick yet; gonna get some sleep and start over tomorrow. I used fastboot to push the stock boot, bootloader, system, recovery, and userdata IMGs a moment ago, and the phone is back to bone stock.
hey guys once again the noob needs help lol... i want to root my g2x currently my g2x has gingerbread version and i just want to root it to calibrate the battery.... I need like a step by step procedure that will tell me how to root and everything I got to do without messing up my g2x....thank you for your time
http://forum.xda-developers.com/showthread.php?t=1060715
G2X CM7
phburks said:
http://forum.xda-developers.com/showthread.php?t=1060715
G2X CM7
Click to expand...
Click to collapse
but i thought superoneclick dont work with gingerbread...??
phburks said:
http://forum.xda-developers.com/showthread.php?t=1060715
G2X CM7
Click to expand...
Click to collapse
Yup - Read that. There is one additional ROM that is not in that list, which i personally prefer.
In the Dev forum, Xboarders has posted a GB OTA ROM that has been rooted - other than that, it is purely stock. If you don't want to run a ROM that has had many changes made (and requires it be updated quite frequently), i would suggest flashing this once you have clockwork mod installed.
propain4444 said:
Yup - Read that. There is one additional ROM that is not in that list, which i personally prefer.
In the Dev forum, Xboarders has posted a GB OTA ROM that has been rooted - other than that, it is purely stock. If you don't want to run a ROM that has had many changes made (and requires it be updated quite frequently), i would suggest flashing this once you have clockwork mod installed.
Click to expand...
Click to collapse
im so sorry can you dumb that a bit more...im sorry again
Georican said:
but i thought superoneclick dont work with gingerbread...??
Click to expand...
Click to collapse
Correct. Follow the instructions for the one click nvflash tool to flash clockworkmod recovery and then flash whichever rom you want. If you want the stock GB rom there is a pre rooted version of it in the development section that you can flash once you get recovery flashed to your phone properly.
G2X CM7
Geovanny he's correct follow the instructions to install clockwork
1. Flash ClockworkMod Recovery. Instructions found in this thread: http://forum.xda-developers.com/showthread.php?t=1056847
2. Boot into ClockworkMod Recovery by turning off your phone and turning it on with the volume down and power button held down until you see the clockworkmod recovery boot screen.
3. Install the zip found here: http://forum.xda-developers.com/showthread.php?t=1179748
4. You are now rooted with the stock GB rom.
i try doin the steps and in the 1st step of rooting the phone the superoneclick just froze like it says superoneclick is not workin and i got scare so i x it out... what can i do?
Why did you try superoneclick if you already knew it doesn't work and we already told you it wouldnt work?
Nvflash clockwork mod recovery using the one click tool. Boot into recovery. Wipe data, wipe dalvik cache. Flash rom of choice. Fix permisssions. Reboot. That's it.
G2X CM7
Oh boy, another thread like this -__-
Dude listen to phburks for some reason u don't have to actually use the root tool, y? I have no clue but its cool and I wonder if we could have done it all along lol so basically u have to use nvflash it is a tool to flash clockworkmod, and it is in superoneclick form so it should be super easy just do what it says install it and u will have recovery, now your probably thinking why can't I just install rom manager? Well u could but with the g2x its what we call a fake flash, basically if u installed a wrong file or something like that And u went into a bootloop u wouldn't be able to get into recovery, that's y we recommend flashing recovery the nvflash method this way if something bad ever happens u can get into your phone by pressing volume down and power. And fix it, with rom manager u can't do that, now once u have recovery installed on ur phone just download that rom they told u to do (xboarders) then go into recovery after u put xboarders zip on the root of ur sdcard, wipe data, wipe cache, then go to advanced and wipe dalvik cache then install the zip, then boot up andyou have a rooted gb rom and will stay rooted
FatalityBoyZahy said:
Oh boy, another thread like this -__-
Click to expand...
Click to collapse
im sorry for your trouble
but i have no skills when it comes to my g2x...is not that i dont listen is that i have no idea what to do exactly thats why i need a step by step of what to do exactly.....is easy for your guys but the nvflash thingy i have no idea where it is you say in superoneclick but i dont kno what to do...do you understand my skills now? there beyond noob and im sorry
Georican said:
im sorry for your trouble
but i have no skills when it comes to my g2x...is not that i dont listen is that i have no idea what to do exactly thats why i need a step by step of what to do exactly.....is easy for your guys but the nvflash thingy i have no idea where it is you say in superoneclick but i dont kno what to do...do you understand my skills now? there beyond noob and im sorry
Click to expand...
Click to collapse
Now I see what the problem is. You're confusing the one click nvflash tool with superoneclick. Superoneclick is used for rooting your stock unrooted rom. Don't worry about superoneclick for now. The one click nvflash tool installs clockworkmod recovery the proper way onto the G2X. It can be found with instructions here:
http://forum.xda-developers.com/showthread.php?t=1056847
Use it to flash recovery and then you can boot into recovery and flash your rom of choice.
G2X CM7
phburks said:
Correct. Follow the instructions for the one click nvflash tool to flash clockworkmod recovery and then flash whichever rom you want....
Click to expand...
Click to collapse
Yup. Worked brilliantly. Thanks SOOOOO much for the shove in the right direction.
Now.... WTF is the "thanks" button? Am I blind or just new?
Georican said:
im sorry for your trouble
but i have no skills when it comes to my g2x...is not that i dont listen is that i have no idea what to do exactly thats why i need a step by step of what to do exactly.....is easy for your guys but the nvflash thingy i have no idea where it is you say in superoneclick but i dont kno what to do...do you understand my skills now? there beyond noob and im sorry
Click to expand...
Click to collapse
Stop being sorry. Every single person on this site was a noob at one time. Just follow the directions phburks posted.
sarni84 said:
Dude listen to phburks for some reason u don't have to actually use the root tool, y? I have no clue but its cool and I wonder if we could have done it all along lol so basically u have to use nvflash it is a tool to flash clockworkmod, and it is in superoneclick form so it should be super easy just do what it says install it and u will have recovery, now your probably thinking why can't I just install rom manager? Well u could but with the g2x its what we call a fake flash, basically if u installed a wrong file or something like that And u went into a bootloop u wouldn't be able to get into recovery, that's y we recommend flashing recovery the nvflash method this way if something bad ever happens u can get into your phone by pressing volume down and power. And fix it, with rom manager u can't do that, now once u have recovery installed on ur phone just download that rom they told u to do (xboarders) then go into recovery after u put xboarders zip on the root of ur sdcard, wipe data, wipe cache, then go to advanced and wipe dalvik cache then install the zip, then boot up andyou have a rooted gb rom and will stay rooted
Click to expand...
Click to collapse
Hey Sarni84,
Just curious what wiping the dalvik cache does in the advanced settings in CWM? I have not seen that on any of the instructions on the developers threads when installing a new rom
phburks said:
Now I see what the problem is. You're confusing the one click nvflash tool with superoneclick. Superoneclick is used for rooting your stock unrooted rom. Don't worry about superoneclick for now. The one click nvflash tool installs clockworkmod recovery the proper way onto the G2X. It can be found with instructions here:
http://forum.xda-developers.com/showthread.php?t=1056847
Use it to flash recovery and then you can boot into recovery and flash your rom of choice.
G2X CM7
Click to expand...
Click to collapse
ok but before i do anything of this my phone is not rooted doing all of this will root my phone so i can do a battery calibration??
Sarchie1982 said:
Hey Sarni84,
Just curious what wiping the dalvik cache does in the advanced settings in CWM? I have not seen that on any of the instructions on the developers threads when installing a new rom
Click to expand...
Click to collapse
The dalvik cache is basically Androids way of optimizing apps so they load faster and your system runs smoother. If you don't clear it when switching to a different rom it can possibly cause issues like boot loops, etc. Not sure if its cleared by clockwork with a data wipe/factory reset so I always clear it through the advanced menu. It doesn't hurt to clear it more than once so I figure better to be sure its cleared.
After you clear it your first reboot can take several minutes depending on how many apps you have installed as it has to rebuild the dalvik cache for all your apps.
G2X CM7
Georican said:
ok but before i do anything of this my phone is not rooted doing all of this will root my phone so i can do a battery calibration??
Click to expand...
Click to collapse
Installing clockworkmod recovery will allow you to flash alternative roms onto your phone. If the rom you flash is rooted then yes you will have root. Most of the custom roms are rooted.
And yes you can do a battery calibration. What problems are you having with your battery?
G2X CM7
ive been rooted for a long time now, i have a Moto Attrix 2. recently i did the updated to the 2.3.6 but before i did, i went ahead and did the perminent root method. this helped me keep root. now i want to jump into Roms. i'm not new to this. i had a Droid X proir to the Attrix. so i kinda know my way around. sorta..aha, ive read the process of the rom i want to install on to my phone which is supercharge Rom
So do you have a question, I couldn't tell from your post
awe man, i'm sorry about that.
my question...actually the question is about the process needed to be taken. i read thru the steps to flash supercharge rom V5 but, i have no clue to where start from since i have not flash a rom on this device.? so i'm startin off from scretch i'm sorry about that, i shoulda proof read that..lol, before i posted.
Step 1)Install CW recovery from this link http://forum.xda-developers.com/showthread.php?t=1346977
Step 2) Run it and reboot into recovery
Step 3) MAKE A BACKUP! I repeat MAKE A BACKUP! this is important in case something goes wrong while flashing a new rom you can flash your backup and return your phone to normal.
Once you have learned to do that you can now start flashing roms. Just download the roms and follow the directions in the roms. ALL ROMS REQUIRE CW Recovery to install so you'll get used to it. I just wanted u to follow those 3 steps before you start flashing roms. People forget to make backups and they end up losing all their info.
Read the BEGINNERS GUIDE it has all the info you could ever need.
eL_MeXiCaNo said:
Step 1)Install CW recovery from this link http://forum.xda-developers.com/showthread.php?t=1346977
Step 2) Run it and reboot into recovery
Step 3) MAKE A BACKUP! I repeat MAKE A BACKUP! this is important in case something goes wrong while flashing a new rom you can flash your backup and return your phone to normal.
Once you have learned to do that you can now start flashing roms. Just download the roms and follow the directions in the roms. ALL ROMS REQUIRE CW Recovery to install so you'll get used to it. I just wanted u to follow those 3 steps before you start flashing roms. People forget to make backups and they end up losing all their info.
Read the BEGINNERS GUIDE it has all the info you could ever need.
Click to expand...
Click to collapse
thanks bro, i got that part down, ive been rollin around with a back up for weeks now ..
oh yea and the other thing, when i went and did the forever root before the OTA update, the one thing that didn't update was the baseband.
Droid_Boi86 said:
thanks bro, i got that part down, ive been rollin around with a back up for weeks now ..
oh yea and the other thing, when i went and did the forever root before the OTA update, the one thing that didn't update was the baseband.
Click to expand...
Click to collapse
Dont worry about ever doing the forever root there's a root method for 2.3.6
Before flashing any rom I suggest you flash the 2.3.5 FXZ and update to 2.3.6 and then root it. This way you start from a fresh base and don't have any random bugs that would take a long time to hunt down and fix due to coming from a non-stock rom.
Ask away. What questions do you have? I recommend installing CWM on Recovery zip (and download the remove script while your at it you might want that). Revoke root rights to Bootstrap after installing the on boot zip. It takes one cycled reboot for the script to take effect. Make sure it works before installing any ROMs. Read the Read Me file for supercharged before installing. That's a few tips from me. Oh, if you have a windows based PC install and know how to use RSD lite and the fxz file in case of a disaster. In other words incase you can't recover from some unforeseen event using your phone and CWM Recovery alone. Make sure your battery is fully charged before installing a new ROM. Off the top of my head those tips come to mind.
Sent from my MB865 using XDA
KEB64 said:
Ask away. What questions do you have? I recommend installing CWM on Recovery zip (and download the remove script while your at it you might want that). Revoke root rights to Bootstrap after installing the on boot zip. It takes one cycled reboot for the script to take effect. Make sure it works before installing any ROMs. Read the Read Me file for supercharged before installing. That's a few tips from me. Oh, if you have a windows based PC install and know how to use RSD lite and the fxz file in case of a disaster. In other words incase you can't recover from some unforeseen event using your phone and CWM Recovery alone. Make sure your battery is fully charged before installing a new ROM. Off the top of my head those tips come to mind.
Sent from my MB865 using XDA
Click to expand...
Click to collapse
whats the reason for denying bootstrap su? ive seen this before and im a 3year android user/flasher and ive yet to deny my bootstrap su after installing anything. so, just wondering why.
rob219 said:
whats the reason for denying bootstrap su? ive seen this before and im a 3year android user/flasher and ive yet to deny my bootstrap su after installing anything. so, just wondering why.
Click to expand...
Click to collapse
Because if you dont deny bootstrap SU after FLASHING CWM ON STARTUP zip then you will not get CWM everytime you boot up, it's a bug. So if you want CWM everytime you boot your phone you have to deny bootstrap SU. Other than that IDK the exact technical details on why it does this, it just does.
KEB64 said:
Ask away. What questions do you have? I recommend installing CWM on Recovery zip (and download the remove script while your at it you might want that). Revoke root rights to Bootstrap after installing the on boot zip. It takes one cycled reboot for the script to take effect. Make sure it works before installing any ROMs. Read the Read Me file for supercharged before installing. That's a few tips from me. Oh, if you have a windows based PC install and know how to use RSD lite and the fxz file in case of a disaster. In other words incase you can't recover from some unforeseen event using your phone and CWM Recovery alone. Make sure your battery is fully charged before installing a new ROM. Off the top of my head those tips come to mind.
Sent from my MB865 using XDA
Click to expand...
Click to collapse
thanks alot man, as far as the RSD lite goes i kno my way aroung that. so i should be good. but as for the first thing you suggested. about the CVM on Recovery Zip? i wanna learn how to do that, meaning install CVM properly. if you could explain or shot me a link to where i read up on it.
Droid_Boi86 said:
thanks alot man, as far as the RSD lite goes i kno my way aroung that. so i should be good. but as for the first thing you suggested. about the CVM on Recovery Zip? i wanna learn how to do that, meaning install CVM properly. if you could explain or shot me a link to where i read up on it.
Click to expand...
Click to collapse
Sorry KEB - not to step on your toes or anything, but...
Get and install the A2 Bootstrap from here.
You can now boot into "Recovery" mode through the Bootstrap app. You can test it first or you can just go and get the CWM on Boot zip files here. Download the two zip attachments in the first post to your sdcard.
Then open the A2 Bootstapper app - click the top button, then ok, then the 2nd button.. and viola! It will boot into recovery.
Then wipe your cache partition, and dalvik cache, and install zip from sdcard. "...Global..." zip makes it boot into recovery every time you reboot, and the "..Remove.." zip removes it.
Good luck. Happy reading!
alteredlikeness said:
Sorry KEB - not to step on your toes or anything, but...
Get the A2 Bootstrap from here.
Get ROM Manager from the Google Play Store.
Install both.
You can now boot into "Recovery" mode through the Bootstrap app. You can test it first or you can just go and get the CWM on Boot zip files here. Download the two zip attachments in the first post to your sdcard.
Then open the A2 Bootstapper app - click the top button, then ok, then the 2nd button.. and viola! It will boot into recovery.
Then wipe your cache partition, and dalvik cache, and install zip from sdcard. "...Global..." zip makes it boot into recovery every time you reboot, and the "..Remove.." zip removes it.
Good luck. Happy reading!
Click to expand...
Click to collapse
thanks for that good explaination on that. now i gotta figure out why my laptop isn't seeing my phone...=/
Droid_Boi86 said:
thanks for that good explaination on that. now i gotta figure out why my laptop isn't seeing my phone...=/
Click to expand...
Click to collapse
Make sure you have the drivers downloaded for the Atrix 2.
thethird84 said:
Make sure you have the drivers downloaded for the Atrix 2.
Click to expand...
Click to collapse
By "seeing your phone," do you mean ADB-wise? Settings -> Applications -> Development -> USB Debugging (enable)
PM me if you need any help. I have Supercharged V5 update 2 running and I love it. there are some things you need to do to make sure it works right though.
thanks alot! i will do..
First of all, I apologize if this is the wrong area to ask this question. I've been to two other forums with my question and have been told to sod-off without help because I posted in the wrong section
Okay, so I bought my first android phone the other day (HTC Inspire!) and I must say, I am never going back to an iPhone ever again.
However, I am a complete and total noob to rooting (as you will find out)
I successfully rooted my phone upon receiving it (with ACE Advanced Hack Kit) and upon trying to install a custom ROM, received an error (to which I cannot seem to remember specifically what it was). I called a friend who told me to re-run the hack kit, which was a bad idea. It ended up freezing on the radio downgrading and put my phone into a bootloop.
I got it out of bootloop after a few hours of research and reset the phone back to its original settings.
Now, my question is: My phone, in HBOOT, still shows that it is "S-OFF." Would it be okay for me to run it through Ace Advanced Hack Kit again to install CWM? I tried using ROM Manager to flash it over, but rom manager is saying my phone isn't rooted at all, which confuses me. I keep getting the error "An error occurred while attempting to run privileged commands!"
Any help or advice you guys can shed would be wonderful.
Once you are s off never run the hack kit again unless you are going to reverse to s on. Your friend gave you some bad advice. Rooted and s off are not the same thing. S off allows flashing of pd98img and custom recovery. Root is an ability within the Rom you use. From your phone install superuser from the market. That will give you root and will let you install a custom recovery through Rom manager. Only install recovery with Rom manager. Don't let Rom manager install a Rom as it is buggy at best. Or you can use 4ext recovery. Once you have a custom recovery do a backup so you can restore if things go wrong. Download whatever Rom you want to use then you want to always select (within recovery) wipe data/factory reset and then wipe dalvik. This should leave you with an empty data, cache and dalvik and also erases android.secure on sd card. Once there you can install a Rom. Never use the factory reset from Rom or hboot with s off as it will really screw things up. Also almost every custom Rom has superuser and busybox installed already so you shouldn't need to install superuser again.
Gizmoe said:
Once you are s off never run the hack kit again unless you are going to reverse to s on. Your friend gave you some bad advice. Rooted and s off are not the same thing. S off allows flashing of pd98img and custom recovery. Root is an ability within the Rom you use. From your phone install superuser from the market. That will give you root and will let you install a custom recovery through Rom manager. Only install recovery with Rom manager. Don't let Rom manager install a Rom as it is buggy at best. Or you can use 4ext recovery. Once you have a custom recovery do a backup so you can restore if things go wrong. Download whatever Rom you want to use then you want to always select (within recovery) wipe data/factory reset and then wipe dalvik. This should leave you with an empty data, cache and dalvik and also erases android.secure on sd card. Once there you can install a Rom. Never use the factory reset from Rom or hboot with s off as it will really screw things up. Also almost every custom Rom has superuser and busybox installed already so you shouldn't need to install superuser again.
Click to expand...
Click to collapse
I've installed SU from the play store, but when I go into ROM Manager, it is still saying superuser isn't installed, or I'm not rooted.
Actually you can use the hack kit again BUT you have to go into the optional menu and not use the main option of root.
In the optional screen their is an option to install cwr.
Or alternatively you can install cwr via a pd98img.
phyzorz said:
I've installed SU from the play store, but when I go into ROM Manager, it is still saying superuser isn't installed, or I'm not rooted.
Click to expand...
Click to collapse
If you are S-OFF but flashed a RUU then you are not rooted anymore. You can do as Mardsta says and flash SU in CWM or if you are willing to flash a custom rom, just make sure that CWM recovery is installed and flash a rooted rom. The important thing is that you already are S-OFF.
Never run a non stock device....if you are already S-OFF there is no reason to re run the Hack Kit.
marsdta said:
Actually you can use the hack kit again BUT you have to go into the optional menu and not use the main option of root.
In the optional screen their is an option to install cwr.
Or alternatively you can install cwr via a pd98img.
Click to expand...
Click to collapse
Ahh yes the optional menu. Been so long since I've used the hack kit I totally spaced the extra options. I rooted back when we still had to make our own gold card.
glevitan said:
If you are S-OFF but flashed a RUU then you are not rooted anymore. You can do as Mardsta says and flash SU in CWM or if you are willing to flash a custom rom, just make sure that CWM recovery is installed and flash a rooted rom. The important thing is that you already are S-OFF.
Never run a non stock device....if you are already S-OFF there is no reason to re run the Hack Kit.
Click to expand...
Click to collapse
That's the thing though. I don't have CWM installed (going to recovery in HBOOT simply yields the red error symbol). I have SU installed, but because I am not rooted, it isn't being recognized by Rom manager. I apologize for my ignorance, but how exactly do I get CWM on my phone then? Is there a program that can root and flash it without messing with the S setting?
phyzorz said:
That's the thing though. I don't have CWM installed (going to recovery in HBOOT simply yields the red error symbol). I have SU installed, but because I am not rooted, it isn't being recognized by Rom manager. I apologize for my ignorance, but how exactly do I get CWM on my phone then? Is there a program that can root and flash it without messing with the S setting?
Click to expand...
Click to collapse
As marsdta said you can use the hack kits optional menu to flash cwm. You may have to put your phone into fastboot though to get it to recognize it. I'm not 100% on that though because I have never done it that way myself. Or you can use a pd98img.
phyzorz said:
That's the thing though. I don't have CWM installed (going to recovery in HBOOT simply yields the red error symbol). I have SU installed, but because I am not rooted, it isn't being recognized by Rom manager. I apologize for my ignorance, but how exactly do I get CWM on my phone then? Is there a program that can root and flash it without messing with the S setting?
Click to expand...
Click to collapse
Gizmoe said:
As marsdta said you can use the hack kits optional menu to flash cwm. You may have to put your phone into fastboot though to get it to recognize it. I'm not 100% on that though because I have never done it that way myself. Or you can use a pd98img.
Click to expand...
Click to collapse
THAT ^^^^^^
Go to Google Play store and download 4ext recovery control. I like it much better than the cwm given by ace. All you need then is a rom dev'd for inspire or dhd. If it's for dhd then you need to also flash inspiremod so the gps and branding reflect north america and inspire 4g.
Hello everyone,
I just bought a Verizon Galaxy S3 and I am in the process of rooting it. Im kinda freaking out because things really arent going that well for me. So far what I've done is root and unlock bootloader. Here is where the problem starts. When I try to reboot into CWM recovery it just boots me into the normal android recovery. Is this normal? every video I have watched shows people manually rebooting straight into CWM. The only way I can get it to work is if I go into EZ recovery and press "Flash" then "Reboot Into Recovery" buttons.
My second area of confusion is regarding the IMEI backup. Is this something everyone does when flashing roms on this phone? I am very confused as to what I'm supposed to do. Do I use the adb or download a terminal app from the play store? If someone could clarify that would be great !
Sorry if these questions are pathetic but this is my first time doing this and it's a learning experience I geuss. Here are the links to the guides I used for what I have done so far.
http://forum.xda-developers.com/showthread.php?t=1762709
http://forum.xda-developers.com/showthread.php?t=1852255
Thanks
I recently saw someone have a problem getting custom recovery persist, and another member pointed out a step you needed to do to get it to stick. I'll see if I can locate that post and add it to this post.
As far as IMEI goes, you only need to back it up once, and then you are good to go. Perform step a followed by step b in the backup thread.
apacseven said:
I recently saw someone have a problem getting custom recovery persist, and another member pointed out a step you needed to do to get it to stick. I'll see if I can locate that post and add it to this post.
As far as IMEI goes, you only need to back it up once, and then you are good to go. Perform step a followed by step b in the backup thread.
Click to expand...
Click to collapse
Alright thanks, so for most people once they flash it once it should stay every time they reboot into recovery? I have probably the noobiest question of all time, what does flashing CWM recovery even do? is it like flashing a rom where it just gets baked in to the OS permanently? Or does it actually provide a backup of data because I thought thats what nandroids were for.
Havent found exactly what I was recalling as far as the recovery problem, but I found something in a thread below this that makes me think maybe your bootloader wasnt unlocked properly. What version (if any) of ez recovery did you use?
Also, flashing CWM (ideally, at least) replaces the stock recovery with the clockworkmod recovery. Then, when you boot into CWM, that is where you make a backup (nandroid) of your current ROM. Once you have backups made you can quickly switch between ROMs by restoring the nandroids.
I hope I understood your question correctly and also answered it properly.
apacseven said:
Havent found exactly what I was recalling as far as the recovery problem, but I found something in a thread below this that makes me think maybe your bootloader wasnt unlocked properly. What version (if any) of ez recovery did you use?
Also, flashing CWM (ideally, at least) replaces the stock recovery with the clockworkmod recovery. Then, when you boot into CWM, that is where you make a backup (nandroid) of your current ROM. Once you have backups made you can quickly switch between ROMs by restoring the nandroids.
I hope I understood your question correctly and also answered it properly.
Click to expand...
Click to collapse
Yes you did, thank you so much. In the tutorial I used it was saying that the newer versions of EZ unlock were having problems so I downloaded version 1.2. How do I proceed if my bootloader was unlocked improperly? Also, I went in to EZ recovery and flashed CWM and made a nandroid backup if this matters.
Thanks so much for your help.
If you used version 1.2 then my point was moot. So you can only get into CWM if you install CWM from ez recovery and then hit reboot into recovery? If you do the hold vol up + home button while powering on it always takes you to stock recovery?
Yep its very weird. Not sure what to do.
Someone else will likely be able to chime in on how to correct this, unfortunately (or fortunately? lol) it hasnt happened to me so I havent had to deal with it. Its not a huge deal so I wouldnt worry about it.
Personally I use TWRP recovery. You can try that and see if it will stick, you can always go back to CWM later. Try it in ez recovery, or Goo manager from the play store (I use goo manager). If you want to try installing it from goo manager, install the app, hit menu, then select install open recovery script.
K cool. So would it hurt me if I just used ez recovery to flash and reboot everytime I need to get into CWM? Also for goo manager does that install the one you were talking about or CWM?
Sent from my SCH-I535 using xda app-developers app
Goo manager is only for TWRP recovery. And as long as the backups are being stored and you can access them the next time you get into CWM, it doesnt matter. Like I said, hopefully someone will be able to tell you how to correct this issue and we will both learn a thing or two from it.
Did you follow Step 12 in Section 2 in the first link you posted?
You have to make sure to go to CWM v6.0.1 in the drop down and install that version of Clockwork Mod Recovery.
I'm not sure if that's the cause of your issue, but you may want to check into that
Yep i did that
Sent from my SCH-I535 using xda app-developers app
Can someone please help D:
Sent from my SCH-I535 using xda app-developers app