Database Info

[Q] Won't Go Into Recovery Just Shows Red Triangle With Red Exclamation Mark.

Brand new Thunderbolt, I did have it rooted but just factory reset it, I no longer have root. I hold down the power button and BOTH volume arrows and get into the screen for recovery, when I go to it it gives me a black screen with a pic of a phone in the middle with a red triangle and a red exclamation mark over top the phone.
I want to root and get a new kernel but think it would not be smart to proceed until I fix this problem. Jeesh, had it less than 12 hours and broke it already haha.
So, how do I get it to let me in there so I can make a nandroid backup?

I'm pretty certain you need to be rooted to access recovery.

Well, last night when I WAS rooted I tried it and it didn't work either. Well, I will try that tonight around 5PM EST and let you know if rooting allows me in. Honestly, I factory reset the phone after I rooted it because I thought the way I rooted it messed it up. Now I am thinking that is not true.

You have to be rooted to get into recovery. Also, and I am not 100% sure about this, if you did a factory re-set and didnt re-root and then reinstall CWR then there wont be a recovery for you to access.

You're looking at the stock recovery. You need to reroot and flash CWM to be able to install custom zips.
Sent from my Thunderbolt.

theincrediblenoob said:
Brand new Thunderbolt, I did have it rooted but just factory reset it, I no longer have root. I hold down the power button and BOTH volume arrows and get into the screen for recovery, when I go to it it gives me a black screen with a pic of a phone in the middle with a red triangle and a red exclamation mark over top the phone.
I want to root and get a new kernel but think it would not be smart to proceed until I fix this problem. Jeesh, had it less than 12 hours and broke it already haha.
So, how do I get it to let me in there so I can make a nandroid backup?
Click to expand...
Click to collapse
A factory reset shouldn't cause you to lose root. That just wipes data/cache. I would return to stock, root again and go from there. There's a thread in the development section on how to return to stock.
Did you flash CWM after rooting??? You can't do **** without that.

Ok, here is what I did, i took a factory thunderbolt and followed all the directions on this link.
http://www.thunderboltforums.com/fo.../1233-rs-guide-how-root-your-thunderbolt.html
Then, I downloaded rom manager and busybox and was about to try and install a kernal. I wanted to make a nandroid back up and thats when I noticed this problem. I also think I lost my 3g access then too. So, I went to factory reset and then tested the root checker app and it said I had NO ROOT.
I am rather noobish so please make the directions on how to fix this simple HAHA. I am also wondering if the link above has good root instructions and how would I install a kernel on the thunderbolt? Even a link to a thunderbolt kernel thread would be sweet!! THanks!!
I will wait for someone to let me know if that link is any good before I root with it again.

dbisch said:
A factory reset shouldn't cause you to lose root. That just wipes data/cache. I would return to stock, root again and go from there. There's a thread in the development section on how to return to stock.
Did you flash CWM after rooting??? You can't do **** without that.
Click to expand...
Click to collapse
Honestly, idk what that is.. Sry, the only other phone i rooted was my incredible through the one step Unrevoked method.
I think the directions in the link above might have missed something that a noob like me would not have picked up on. Something you guys prolly would have known right away.

Go to xda Tbolt dev section, find the root how-to thread and re-root
Sent from my ADR6400L using XDA App

theincrediblenoob said:
Honestly, idk what that is.. Sry, the only other phone i rooted was my incredible through the one step Unrevoked method.
I think the directions in the link above might have missed something that a noob like me would not have picked up on. Something you guys prolly would have known right away.
Click to expand...
Click to collapse
CMW is ClockworkMod Recovery. It's the recovery you flash in ROM Manager.
Follow this thread for rooting. There's a few other methods in the development section that have scripts so you don't have to manually push through ABD. Doing it yourself is more fail safe though and also a good learning experience.
http://forum.xda-developers.com/showthread.php?t=996616

dbisch said:
CMW is ClockworkMod Recovery. It's the recovery you flash in ROM Manager.
Follow this thread for rooting. There's a few other methods in the development section that have scripts so you don't have to manually push through ABD. Doing it yourself is more fail safe though and also a good learning experience.
http://forum.xda-developers.com/showthread.php?t=996616
Click to expand...
Click to collapse
What about the link in my original post that I used to root? Any good?

theincrediblenoob said:
Then, I downloaded rom manager and busybox
Click to expand...
Click to collapse
Downloading Rom Manager is NOT installing custom recovery but a way to do so.
Once RM is installed open it up & choose Flash ClockworkMod Recovery. That will install the latest recovery from which you can run backups and such.

feedhead said:
Downloading Rom Manager is NOT installing custom recovery but a way to do so.
Once RM is installed open it up & choose Flash ClockworkMod Recovery. That will install the latest recovery from which you can run backups and such.
Click to expand...
Click to collapse
See, now when I did my incredible I never even downloaded rom manager. I don't even know what it really does. I thought I held up and power when turning on to get into the menu and I was able to make the nandroid backup from that menu somewhere?

dbisch said:
A factory reset shouldn't cause you to lose root. That just wipes data/cache. I would return to stock, root again and go from there. There's a thread in the development section on how to return to stock.
Did you flash CWM after rooting??? You can't do **** without that.
Click to expand...
Click to collapse
What do you mean exactly by flashing CWM ? I just followed the instructions that the link gave me to do. If you wanna check it out i included the below
http://www.thunderboltforums.com/fo.../1233-rs-guide-how-root-your-thunderbolt.html

So... Just my 2 cents. You said you downloaded clockworks and busy box, but I never saw you reference super user. That should have been download number 1 after root. Without that, you're not doing anything.

bking_soda said:
So... Just my 2 cents. You said you downloaded clockworks and busy box, but I never saw you reference super user. That should have been download number 1 after root. Without that, you're not doing anything.
Click to expand...
Click to collapse
Yes, I did get that one too. I just rerooted it and now I am looking at the main screen in the rom manager again. What should I do? I do not have busy box, I have rom manager, superuser and root access. I keep hearing something about flashing clockworkrecovery next?? Like does that mean just click on the box in rom manager?

theincrediblenoob said:
I keep hearing something about flashing clockworkrecovery next?? Like does that mean just click on the box in rom manager?
Click to expand...
Click to collapse
In ROM Manager if you select "Flash ClockworkMod Recovery", Rom Manager will do just that.
It will flash your recovery.

MePascal said:
In ROM Manager if you select "Flash ClockworkMod Recovery", Rom Manager will do just that.
It will flash your recovery.
Click to expand...
Click to collapse
Ok I guess I am not fully understanding this. What does it really mean to "flash" your "recovery"?
Does this mean to make a copy of your current phone, like a nandroid backup? Or does it mean to access a copy you have already made and revert your system to that prior copy? Or am I wrong on both?

theincrediblenoob said:
Ok I guess I am not fully understanding this. What does it really mean to "flash" your "recovery"?
Does this mean to make a copy of your current phone, like a nandroid backup? Or does it mean to access a copy you have already made and revert your system to that prior copy? Or am I wrong on both?
Click to expand...
Click to collapse
The answer to your first question of the first link being any good...that would be a big NO. Your phone never rooted from the start due to faulty directions posted. As far as flashing a recovery from clockworkmod that basically means when you need to get to the recovery screen this is the program that will bring you there with the understanding that you flash the recovery. NOW to do that there is an option at the top of the screen which says
" Flash ClockworkMod Recovery "
Latest Recovery: ClockworkMod 3.0.2.5
Once you flash it will show this:
Flash CLockworkMod Recovery
Current Recovery: ClockworkMod 3.0.3.5
Latest Recovery: ClockworkMod 3.0.2.5
TO FLASH YOU SIMPLY SELECT THIS BOX AND IT WILL BRING UP A SCREEN TO CONFIRM PHONE MODEL AND THEN WILL ASK FOR SUPERUSER PERMISSION WHICH YOU MUST GRANT ACCESS TO AT ALL TIMES.

KDKobes said:
The answer to your first question of the first link being any good...that would be a big NO. Your phone never rooted from the start due to faulty directions posted. As far as flashing a recovery from clockworkmod that basically means when you need to get to the recovery screen this is the program that will bring you there with the understanding that you flash the recovery. NOW to do that there is an option at the top of the screen which says
" Flash ClockworkMod Recovery "
Latest Recovery: ClockworkMod 3.0.2.5
Once you flash it will show this:
Flash CLockworkMod Recovery
Current Recovery: ClockworkMod 3.0.3.5
Latest Recovery: ClockworkMod 3.0.2.5
TO FLASH YOU SIMPLY SELECT THIS BOX AND IT WILL BRING UP A SCREEN TO CONFIRM PHONE MODEL AND THEN WILL ASK FOR SUPERUSER PERMISSION WHICH YOU MUST GRANT ACCESS TO AT ALL TIMES.
Click to expand...
Click to collapse
What is wrong with the link above?? I used it last night to root the phone and according to root checker I have root... I am not second guessing you, I am just wanting to know what is wrong with it so I can fix the wrong or add the missed steps so I dont have issues.

[Q] gingerbread g2x

Can anyone please help me with a step by step tutorial on how to root gingerbread 2.3.3.

http://forum.xda-developers.com/showthread.php?t=1216978
G2X CM7

I finally bit the bullet and did it last night. You can't do it like Super One Click, you basically have to install ClockWorkMod
Go here and skip down to the picture of the screen with 3 large buttons.
Follow the instructions to:
1) Install the Nvidia NvFlash APX Driver
2) Install Flash ClockworkMod Recovery
3) Download a ROM (I just chose the stock Gingerbread with root access -- That is the only way to get Root Access)
4) Put the downloaded ROM on the root directory of your SD card
5) Backup all your stuff (I used MyBackup Pro)
6) Follow the instructions to boot into recovery mode.
7) There are instructions for installing each mod but it involves clearing data/cache, installing the mod.
It isn't as hard as it sounds but it can be intimidating. This is just a summary from the top of my head. There may be a few more steps.
Good luck.

Here is the link for the stock Gingerbread 2.3.3 mod.
http://forum.xda-developers.com/showthread.php?t=1179748

Do I need to be rooted to flash?

codeyhp said:
Do I need to be rooted to flash?
Click to expand...
Click to collapse
No. As long as you flash recovery properly then you can flash any rom compatible with the phone. As long as the rom is rooted you'll have root.
G2X CM7

flash recovery as in having the menu where you hold lower volume button and the power button to make it say android and have it show up a menu for reboot,wipe data/cache, etc?

codeyhp said:
flash recovery as in having the menu where you hold lower volume button and the power button to make it say android and have it show up a menu for reboot,wipe data/cache, etc?
Click to expand...
Click to collapse
That's the one. It should say clockworkmod recovery at the top.
G2X CM7

Before you flash a rom make sure to wipe data/factory reset. Its one of the options in the recovery menu.
G2X CM7

ok. What if i mess up? Mess up as in like it crashes during and when i load it up will it be bricked?

codeyhp said:
ok. What if i mess up? Mess up as in like it crashes during and when i load it up will it be bricked?
Click to expand...
Click to collapse
Do you mean when you flash a new rom? If so then no, as long as you used the nvflash method to put clockworkmod recovery on your G2X then you can always boot back into recovery to fix your issues. Just make sure you ONLY flash roms made for the G2X. Don't flash anything made for the O2X.
G2X CM7

General rule for flashing roms:
- If you're switching from one rom to a different one, you should do a full wipe/factory reset before flashing. For instance, flashing from stock to CM7, or flashing from CM7 to MIUI, etc.
- If you're updating to a newer version of the same rom, then just wipe cache and dalvik cache and then flash the update.
G2X CM7

Ok i just finished flashing ginger bread 2.3.3 rooted onto my g2x. Also How do i get the old camera back from froyo? That one had so many options, this one has very little and i jjust downloaded an app but it wont install

Superuser update.zip?
After installing CWM recovery why can't you just run Chaindd's SuperUser update.zip installer. Since CWM is on the phone, it should be able to install this update.zip file. If not, why not?

jboxer said:
After installing CWM recovery why can't you just run Chaindd's SuperUser update.zip installer. Since CWM is on the phone, it should be able to install this update.zip file. If not, why not?
Click to expand...
Click to collapse
No clue. I'd like to take a look at it. Do you have a link to that zip file? What does flashing the zip do to the phone? Have you tried it? Results?
G2X CM7

phburks said:
No clue. I'd like to take a look at it. Do you have a link to that zip file? What does flashing the zip do to the phone? Have you tried it? Results?
G2X CM7
Click to expand...
Click to collapse
I don't have my G2X yet so I haven't tried it. The file can be found in Chaindd's SuperUser thread. He is the author of the SuperUser permissions program. It just installs superuser.apk and su with proper permissions to the phone. Works on most devices with CWM installed.

jboxer said:
I don't have my G2X yet so I haven't tried it. The file can be found in Chaindd's SuperUser thread. He is the author of the SuperUser permissions program. It just installs superuser.apk and su with proper permissions to the phone. Works on most devices with CWM installed.
Click to expand...
Click to collapse
Is this the right thread here? http://forum.xda-developers.com/showthread.php?t=682828
I don't see a version for gingerbread. Maybe I'm looking in the wrong place.
G2X CM7

phburks said:
Is this the right thread here? http://forum.xda-developers.com/showthread.php?t=682828
I don't see a version for gingerbread. Maybe I'm looking in the wrong place.
G2X CM7
Click to expand...
Click to collapse
Yes, that is correct. Use the Froyo version.

jboxer said:
Yes, that is correct. Use the Froyo version.
Click to expand...
Click to collapse
Will give it a try when I have some time.
G2X CM7

MN_Bug said:
1) Install the Nvidia NvFlash APX Driver
Click to expand...
Click to collapse
How???? i have the drivers, opened every one..dont know how to install...

How can I get the LG froyo camera back?

Is it possible to take a certain app or program from a certain rom and like pull it from the rom and install it on a rooted phone? I just rooted my g2x and I want the old LG froyo camera back. Can it get pulled from another rom and installed on my phone without my flashing a new rom?[

Rooted but on gingerbread? Head on over to the development section and check out flak0's mod... Just download it and flash away... Wait! You have clockwork recovery right?
Sent from my LG-P999 using xda premium

To answer your question
generally: yes. However, the LG camera is a special case and a lot of work has gone into making it work on gingerbread. It is possible but you'll need a specific mod over in the Development board.
Sent from my Nexus Prime using XDA Ultimate App

Yes on gingerbread and yes I have the clockwork recovery mod. I'm familiar with this stuff but not an expert, so sorry if these are noob questions but I checked out the thread and there is a bunch of links for the camera. Which one do I download? Im guessing the 3.0 one but Im not sure. And thats the actual cam that I am going to flash on my phone right? Not a new mod? and do I flash it on my phone just like the clockwork mod? I mean the same exact process? Or is this just like an .apk that I install? Can you please help me through the process of getting it on my phone?
http://forum.xda-developers.com/showthread.php?t=1166531

Yeah the 3.0 is the one you want.
Just flash it in Clockwork the way you would flash any rom or kernel.
Before you flash though make sure to wipe cache and dalvik, and just to be safe fix permissions afterwards.
Just to make sure we're on the same page... You flashed clockwork via the NVflash method, right?
and then to get into clockwork to flash other stuff such as roms and this camera, you hold volume down and power from a powered off state, correct?

thanasisc4 said:
Yeah the 3.0 is the one you want.
Just flash it in Clockwork the way you would flash any rom or kernel.
Before you flash though make sure to wipe cache and dalvik, and just to be safe fix permissions afterwards.
Just to make sure we're on the same page... You flashed clockwork via the NVflash method, right?
and then to get into clockwork to flash other stuff such as roms and this camera, you hold volume down and power from a powered off state, correct?
Click to expand...
Click to collapse
Yes I am on clockwork via NVflash. I'm still a bit confused. Sorry if I wasnt clear before. See, the clockwork thing was the only and first thing I flashed. I never flashed a rom or anything. I followed the instructions to root exactly how I saw them. Obviously one step was to flash the clockwork mod. Thats how far my experience with flashing goes. So Im not exactly sure what to do to flash the cam on my phone. I put it on my sd card Im assuming right? Then I do the hold volume down and power to get to whatever that screen is called? After that do I just go to "install zip from sdcard" and look for it? Thats what I assumed but I have no idea why I have to wipe cache or what dalvik is? and why/how do I fix permissions after?

Ok good ur on the right track having CWM installed via NVflash.
Two questions:
1) What version of clockwork are your running?
2) How did you achieve root if the only thing you've ever flashed is clockwork?
That will help me help you.

I think the CWM is 5.020. I got it from this link..
http://forum.xda-developers.com/showthread.php?t=1056847
then to root, all I did was download the root zip file found in this link..
http://forum.xda-developers.com/showthread.php?t=1255214
I followed those steps.

So then you have flashed something in CWM... you flashed the root zip, no?
The same way you flashed the root zip is the same way ur gonna flash the camera, I guess since its not a rom or kernel you don't need to bother wiping catch and fixing permissions:
-Boot into CWM with vol down and power
-select install zip from sd card
-find the camera 3.0 zip on ur sd card, install
-reboot, enjoy
For future reference, when ur ready to flash a custom rom or kernel, add 3 more steps to this process:
-Boot into CWM
-wipe catch partition (in the case that your going from a 2.3.3 rom to a CM7 based rom, this step changes to "wipe data/factory reset")
-advanced, wipe dalvik catch
-install zip from sd card
-find zip and install it
-advanced, fix permissions

Thank you! Just one last quick question. Let's say I flash the cam app. Then later down the road I wanna flash a new rom. Since I gotta wipe everything I would have to flash the cam back to use it on the new rom right?

Yes. However, don't try to flash the LG cam over a CM7-based rom, as it won't work. 2.3.3 based roms are ok.

So what are my options if I don't like the Gingerbread/cm7/AOSP camera?
it sucks big time

Which ROM is the best? I am seriously thinking about flashing a new rom on my phone. I never was but I guess flashing is like a drug, do it once and you'll wanna do it more. well atleast for me lol. I'm asking this because I was looking through the rom options in the other forum and I read something about needing to flash a kernel to overclock, then I saw a CM7 kernel with an overclock preset? Confused me a little. I can flash any rom I want and overclock myself right? Will all roms have a kernel that supports overclocking?
Can you give me the best rom/kernel to flash based what I'm looking for? I would like to overclock to atleast 1.2(Whats the highest I can do without it becoming dangerous for the phone?). I want no bloatware, can a rom free up internal memory? if so, I want that, faster then stock performance and better battery life. The LG camera or atleast a cam app that is better then stock android. I also want stablity in performance. Just for a reference, I was looking at Weapon rom, seems like the best to me, but then again I am new to the whole rom game. I know its based on personal taste, but I would like a little push in the right direction so I dont have to do trial and error with roms.
Thanks in advance for all your help.

pyromaniac1 said:
So what are my options if I don't like the Gingerbread/cm7/AOSP camera?
it sucks big time
Click to expand...
Click to collapse
https://market.android.com/details?id=com.mnapps.cameraadvancelite&hl=en
that is near the same camera, likely the same developers.
Only thing is I think the steady feature was an option on all photo modes on Froyo LG, where here its a specific option itself. I don't remember well enough the old one.

Thanks a lot mate

just rooted my sisters galaxy s 4g and cant get a custom recovery to stick???

k.. i went on u tube to see if i could root me sisters gs 4g everything went fine but dont kno how to flash a custom recovery?? its has superuser.. i went on rom manager and tryed to flash it that way and it didnt work??i have an evo 3d so i dont no much about this phone but i really want to flash a diff rom for her.. please help!! thanks

This should help you out.
http://forum.xda-developers.com/showthread.php?p=22002167#post22002167
Stay away from ROM manager it does not work with this phone.

this is crazy!! when i go in to the stock recovery all it says is.. reboot system now...reinstall packages...delete all user data..delete cache data.... thats it!!! where the hell is install zip from sdcard???? it dont make sence?? lol wtf!!?? so all the thing i have read on how to install cwm recovery.. they all say download the cwm zip to the root of the sdcard go in to recovery and install it from there but when i get in to recovery there is no way to install anything??????? lol am i missing something??

evod3 said:
this is crazy!! when i go in to the stock recovery all it says is.. reboot system now...reinstall packages...delete all user data..delete cache data.... thats it!!! where the hell is install zip from sdcard???? it dont make sence?? lol wtf!!?? so all the thing i have read on how to install cwm recovery.. they all say download the cwm zip to the root of the sdcard go in to recovery and install it from there but when i get in to recovery there is no way to install anything??????? lol am i missing something??
Click to expand...
Click to collapse
Reread it man! You are missing a lot. You need the custom kernel. Look for the part that talks about SGS Kernel Flasher assuming you are on GB already. I think it is laid out pretty clearly. Skimming the post will only mess up your sisters phone.
http://forum.xda-developers.com/showpost.php?p=21953587&postcount=1

and thank this guy ^^^. He's the one that put that together so folks could have an easier time. This phone is a PIA at first but once you figure it out it's pretty easy.

[Q] a little help

ive been rooted for a long time now, i have a Moto Attrix 2. recently i did the updated to the 2.3.6 but before i did, i went ahead and did the perminent root method. this helped me keep root. now i want to jump into Roms. i'm not new to this. i had a Droid X proir to the Attrix. so i kinda know my way around. sorta..aha, ive read the process of the rom i want to install on to my phone which is supercharge Rom

So do you have a question, I couldn't tell from your post

awe man, i'm sorry about that.
my question...actually the question is about the process needed to be taken. i read thru the steps to flash supercharge rom V5 but, i have no clue to where start from since i have not flash a rom on this device.? so i'm startin off from scretch i'm sorry about that, i shoulda proof read that..lol, before i posted.

Step 1)Install CW recovery from this link http://forum.xda-developers.com/showthread.php?t=1346977
Step 2) Run it and reboot into recovery
Step 3) MAKE A BACKUP! I repeat MAKE A BACKUP! this is important in case something goes wrong while flashing a new rom you can flash your backup and return your phone to normal.
Once you have learned to do that you can now start flashing roms. Just download the roms and follow the directions in the roms. ALL ROMS REQUIRE CW Recovery to install so you'll get used to it. I just wanted u to follow those 3 steps before you start flashing roms. People forget to make backups and they end up losing all their info.
Read the BEGINNERS GUIDE it has all the info you could ever need.

eL_MeXiCaNo said:
Step 1)Install CW recovery from this link http://forum.xda-developers.com/showthread.php?t=1346977
Step 2) Run it and reboot into recovery
Step 3) MAKE A BACKUP! I repeat MAKE A BACKUP! this is important in case something goes wrong while flashing a new rom you can flash your backup and return your phone to normal.
Once you have learned to do that you can now start flashing roms. Just download the roms and follow the directions in the roms. ALL ROMS REQUIRE CW Recovery to install so you'll get used to it. I just wanted u to follow those 3 steps before you start flashing roms. People forget to make backups and they end up losing all their info.
Read the BEGINNERS GUIDE it has all the info you could ever need.
Click to expand...
Click to collapse
thanks bro, i got that part down, ive been rollin around with a back up for weeks now ..
oh yea and the other thing, when i went and did the forever root before the OTA update, the one thing that didn't update was the baseband.

Droid_Boi86 said:
thanks bro, i got that part down, ive been rollin around with a back up for weeks now ..
oh yea and the other thing, when i went and did the forever root before the OTA update, the one thing that didn't update was the baseband.
Click to expand...
Click to collapse
Dont worry about ever doing the forever root there's a root method for 2.3.6
Before flashing any rom I suggest you flash the 2.3.5 FXZ and update to 2.3.6 and then root it. This way you start from a fresh base and don't have any random bugs that would take a long time to hunt down and fix due to coming from a non-stock rom.

Ask away. What questions do you have? I recommend installing CWM on Recovery zip (and download the remove script while your at it you might want that). Revoke root rights to Bootstrap after installing the on boot zip. It takes one cycled reboot for the script to take effect. Make sure it works before installing any ROMs. Read the Read Me file for supercharged before installing. That's a few tips from me. Oh, if you have a windows based PC install and know how to use RSD lite and the fxz file in case of a disaster. In other words incase you can't recover from some unforeseen event using your phone and CWM Recovery alone. Make sure your battery is fully charged before installing a new ROM. Off the top of my head those tips come to mind.
Sent from my MB865 using XDA

KEB64 said:
Ask away. What questions do you have? I recommend installing CWM on Recovery zip (and download the remove script while your at it you might want that). Revoke root rights to Bootstrap after installing the on boot zip. It takes one cycled reboot for the script to take effect. Make sure it works before installing any ROMs. Read the Read Me file for supercharged before installing. That's a few tips from me. Oh, if you have a windows based PC install and know how to use RSD lite and the fxz file in case of a disaster. In other words incase you can't recover from some unforeseen event using your phone and CWM Recovery alone. Make sure your battery is fully charged before installing a new ROM. Off the top of my head those tips come to mind.
Sent from my MB865 using XDA
Click to expand...
Click to collapse
whats the reason for denying bootstrap su? ive seen this before and im a 3year android user/flasher and ive yet to deny my bootstrap su after installing anything. so, just wondering why.

rob219 said:
whats the reason for denying bootstrap su? ive seen this before and im a 3year android user/flasher and ive yet to deny my bootstrap su after installing anything. so, just wondering why.
Click to expand...
Click to collapse
Because if you dont deny bootstrap SU after FLASHING CWM ON STARTUP zip then you will not get CWM everytime you boot up, it's a bug. So if you want CWM everytime you boot your phone you have to deny bootstrap SU. Other than that IDK the exact technical details on why it does this, it just does.

KEB64 said:
Ask away. What questions do you have? I recommend installing CWM on Recovery zip (and download the remove script while your at it you might want that). Revoke root rights to Bootstrap after installing the on boot zip. It takes one cycled reboot for the script to take effect. Make sure it works before installing any ROMs. Read the Read Me file for supercharged before installing. That's a few tips from me. Oh, if you have a windows based PC install and know how to use RSD lite and the fxz file in case of a disaster. In other words incase you can't recover from some unforeseen event using your phone and CWM Recovery alone. Make sure your battery is fully charged before installing a new ROM. Off the top of my head those tips come to mind.
Sent from my MB865 using XDA
Click to expand...
Click to collapse
thanks alot man, as far as the RSD lite goes i kno my way aroung that. so i should be good. but as for the first thing you suggested. about the CVM on Recovery Zip? i wanna learn how to do that, meaning install CVM properly. if you could explain or shot me a link to where i read up on it.

Droid_Boi86 said:
thanks alot man, as far as the RSD lite goes i kno my way aroung that. so i should be good. but as for the first thing you suggested. about the CVM on Recovery Zip? i wanna learn how to do that, meaning install CVM properly. if you could explain or shot me a link to where i read up on it.
Click to expand...
Click to collapse
Sorry KEB - not to step on your toes or anything, but...
Get and install the A2 Bootstrap from here.
You can now boot into "Recovery" mode through the Bootstrap app. You can test it first or you can just go and get the CWM on Boot zip files here. Download the two zip attachments in the first post to your sdcard.
Then open the A2 Bootstapper app - click the top button, then ok, then the 2nd button.. and viola! It will boot into recovery.
Then wipe your cache partition, and dalvik cache, and install zip from sdcard. "...Global..." zip makes it boot into recovery every time you reboot, and the "..Remove.." zip removes it.
Good luck. Happy reading!

alteredlikeness said:
Sorry KEB - not to step on your toes or anything, but...
Get the A2 Bootstrap from here.
Get ROM Manager from the Google Play Store.
Install both.
You can now boot into "Recovery" mode through the Bootstrap app. You can test it first or you can just go and get the CWM on Boot zip files here. Download the two zip attachments in the first post to your sdcard.
Then open the A2 Bootstapper app - click the top button, then ok, then the 2nd button.. and viola! It will boot into recovery.
Then wipe your cache partition, and dalvik cache, and install zip from sdcard. "...Global..." zip makes it boot into recovery every time you reboot, and the "..Remove.." zip removes it.
Good luck. Happy reading!
Click to expand...
Click to collapse
thanks for that good explaination on that. now i gotta figure out why my laptop isn't seeing my phone...=/

Droid_Boi86 said:
thanks for that good explaination on that. now i gotta figure out why my laptop isn't seeing my phone...=/
Click to expand...
Click to collapse
Make sure you have the drivers downloaded for the Atrix 2.

thethird84 said:
Make sure you have the drivers downloaded for the Atrix 2.
Click to expand...
Click to collapse
By "seeing your phone," do you mean ADB-wise? Settings -> Applications -> Development -> USB Debugging (enable)

PM me if you need any help. I have Supercharged V5 update 2 running and I love it. there are some things you need to do to make sure it works right though.

thanks alot! i will do..