I cracked my screen (while it was in the pocket of my jeans). Anyone know where I can find replacement screen? Is it easy to change it?
Thanks
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Philippe_Raimo said:
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Click to expand...
Click to collapse
Thank you very much, I will look into this one.
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Look for an original AUO H380VL01 or HTC Touch HD Sharp matrix... It's reported to be compatible with our phone
cracked screen too
baddentist said:
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Click to expand...
Click to collapse
i have the same thing with my acer screen (cracked in my jeans)
i buy one on ebay (i m waiting the screen)
can you tell me how to do to change the screen ? it's easy?
(sorry for my bad english)
ok it s done
i recieve my lcd screen with tools and i change it
it's easy
the screen is ok thanks for xda and all of you for existing
(sorry for my bad english)
I installed mine today -after 6 months with broken screen- I bought lcd for HTC Touch HD T8282.It is far more cheaper than the acer one and fits perfectly.ebay item 290424248491.
The HD screen is the same of NeoTouch?
I've paid 70€ for a screen for newTouch, but your proposition is more good: 50€!!
Are you sure it's good for Acer? My touchscreen is OK...
Im using it since last friday. its perfect
I received my screen today, but it's difficult to open this mobile phone!
I remove 5 screw on sur back of the phone, but i don't know what remove
There are two more screws at the left and right sides of battery house
littlbox said:
Im using it since last friday. its perfect
Click to expand...
Click to collapse
i have the same prob.... i dropped my phone and my screen blanked ....and i need another lcd .... i was thinking about what you did.... but if i'll get the HTC one the front of the mobile will be with HTC logo instead of the ACER one ...
right?
screen now fixed
I took my phone in to a local shop and they were able to change out the screen using an HTC HD screen (yes, the exact same screen as the neotouch). All is fine with the screen. They messed up the power button, but that is another story. I watched the guy do this and it seemed like a hell of a lot of intricate work to do yourself. I was happy to pay the $120. Now, I just need to return and get them to redo the power button (installed it incorrectly when putting it all back together).
For those adventurous enough- go for it, but I suggest the cheaper HD screen. And no, only the screen was replaced, which is under the touch screen/digitizer that actually has the acer logo. All looks as it did before.
I took my neotouch for a motocycleride in the rain. It didn't like it too much and now the touchfunction is messed up on parts of the screen. It all displays as it should but I can't use parts of the screen. I should be allright with just replacing the digitizer right? Ebay item Item number: 170518652337
Hi, the same for me.
Touch doesn't work on some area.
Need change digitizer or LCD?
Antenna gps
Hi someone tell me where it's possible to buy a part "gps antenna "?
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
darks1de said:
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
Click to expand...
Click to collapse
Hi,
this didn't work in my case. After replacing my broken original lcd screen with a new lcd display (eBay - No. 120608475783, Original HTC Touch HD LCD Display T8282), I can see that the display is switched on, but it doesn't seem to receive any signal (like you turn on your pc monitor but not the pc). Now I have two questions:
1.) If only the lcd display is broken - should I still see something on the display? Because on my broken display, I only have a black and a white part and some coloured stripes, mostly where the display is broken.
2.) Is it possible that there is something more broken on my NeoTouch or did I simply receive a broken lcd panel? It did fall off the couch, completely flat on the display.
fyi: the new lcd was missing some isolation (on the flexible part with some electrical components) which was present on my original lcd. I used some sticky tape as a replacement because it is directly positioned over some other electrical components on the phone when in place.
New Info:
Everything except from the display seems to be fine - when it is connected to my PC running "My Mobiler". But I have seen pictures of mobiles with a cracked screen whre you were still able to see (partly) the homescreen, etc. On mine, I am not able to see anything while the cracked screen is mounted - only white and black parts and some colored stripes...
Update: The delivered display was broken. Yesterday I received a new one which works perfectly!
many thanks in advance
TrashX
aih, the same story with my f1
anyway could you suggested seller lcd f1 on ebay???
i'm afraid if wrong order with lcd resolution under wvga,,,
some seller show resolution from their prodocut and a lot of seller don't do that,,
please help me..
I'm having a strange problem with my Star G9300+, MTK6577.
There is a part of the screen, where the touch of 1 finger is recognized as 2 fingers, 5mm vertically distant one from the other.
I've tried with a multitouch tester APP, and it shows that this happens on the whole width of the screen, for a 5mm-height area, in the middle of the screen.
Any idea on what it can be, and how to solve it?
Thanks
Omar
got this problem on my first multitouch device, too. this is a faulty digitizer. buy a replacement one, this is the only way get it working.
do you know were i can find a touch replace
Hi,
So a while back the touchscreen of my ZOPO C2 started acting up,
I decided to open up an app where I could draw and it turns out I can't get any input on a perfect row about an inch or so from the top of the screen, and about half an inch across, all the way from one side to another.
I can color in the whole screen but it's perfectly blank on that one row. ( see screenshot )
Now since a week this half inch has doubled to an inch where it makes my phone damn hard to use.
Now i think its a problem with the digitizer, i need to know sure if a replacement screen+touch part will fix it, because i dont wanna throw away 90 euro's
Thx in advance
running android 4.2
screen was not cracked till it happened (is now because i dropped it -.-)
bump
Screen is way too sensitive. It often registers touch before I touch the screen. Using fleksy is a real *****.
soundneedle said:
Screen is way too sensitive. It often registers touch before I touch the screen. Using fleksy is a real *****.
Click to expand...
Click to collapse
damn, i have this issue on the galaxy tab s 10.5 i am returning to get the shield tablet, sad to hear its also an issue here. what is nuts is you can make the sensitivity even HIGHER (but not lower derp) on the tab s 10.5. it does the same thing, just hover above it and it registers a touch.
I can't believe there isn't more posted on this topic. My screen can register a touch almost a half inch off the screen. Is there any way to fix this?
Ok so ive replaced the screen on my mums N5, with one i got here.
(its not letting me post the link to where i bought the screen, i'm too new, but this is the description "US White Google Nexus 5 LG D820 D821 LCD Touch Digitizer Screen Assembly + Frame", i got it on ebay)
The installation went fine i think, i may have damaged the camera, but i biggest problem is the touch screen. It was ok after a reboot and it was not charging. But now it is totally off now. Like and inch or 2 off making it unusable. Ive been trying to find a way to calibrate the touch screen but i have not been successful. I was hopping that someone had an idea of how to fix this. The phone seems to work in all other ways, but its hard to test at the moment.
Thanks T