Related
Ever since I got my brand new HTC Touch Pro I noticed the screen to be way less sensitive than my girlfriend's iPhone.
For example in the Contacts app, when I use my finger to scroll down or up I find myself many times opening a contact rather than the screen scrolled down or up. Same goes for many other presses on the screen with the finger. I find myself using much more force than I naturally would use with an iPhone
I wonder if my unit is faulty requirming more pressure to the screen or maybe that just the way it should be by deisgn? I assume only users who used both iPhone and Touch Pro could answer that. I don't know anybody with Diamond or Touch pro so I have no way of checking it other than asking you guys.
Thanks
Iphone and Touch Pro use different types of touch screen.
We have Capasitive screen on iPhone which doesn't require pressure, just a touch.
And we have touch-resistive screens on most of Windows Mobile (inc. Touch Pro) which are less sensitive than iPhone...
Here is a link that might help: http://www.rycom.com.au/capvsres.htm
by the nature of the technology involved to sense your touch, the pro is less sensitive than the iphone.
the iphone uses a capacitive touchscreen which senses the electrical signal around your finger whereas the tp uses a resistive touchscreen which senses where your finger presses the screen in.
resistive screens are designed for sytli, and the "gestures" and flick scrolling implemented on many htc devices are a kind of fudged system to imitate gestures on the iphone. i know on my wizard i could adjust the touch scrolling sensitivity through schaps advanced configuration tool, but i'm not sure if you can do that with the touch pro. its all about how much force/speed you use on the TP.
i know you can get used to it, and it will function properly, but it is definitely different from the iphone. good luck!
Thanks guys. Both of your replies are most helpful. I began to fear that my unit had a fault in it. Seems to make sense that is how it works after I understand it. I most appreciate the responses. Thanks.
mobiler said:
Thanks guys. Both of your replies are most helpful. I began to fear that my unit had a fault in it. Seems to make sense that is how it works after I understand it. I most appreciate the responses. Thanks.
Click to expand...
Click to collapse
You will get better results using software designed from the ground up to be finger-friendly e.g. touchflo3d works well with only light pressure, and for contacts pocketcm also scrolls with only light pressure.
http://www.pocketcm.com/
Surur
On the plus side, the Touch pro(and all other non-capacitance screens) are less picky. I noticed that if you use fingernails on an iPhone it will ignore you. you have to touch with your finger. Our screen will respond to anything that touches it...pen, fingernail, rock. There are +/- s to both. Just have to get used to the change.
yeah pocketcm is great for scrolling also there is pointui if you dont like touchflo that is a free app that redoes the interface all scrolling too
and i usually use my fingernail for most stuff instead of my finger
jblakk said:
On the plus side, the Touch pro(and all other non-capacitance screens) are less picky. I noticed that if you use fingernails on an iPhone it will ignore you. you have to touch with your finger. Our screen will respond to anything that touches it...pen, fingernail, rock. There are +/- s to both. Just have to get used to the change.
Click to expand...
Click to collapse
I used a metal key depth gauge, and though it felt smooth, it put a nice scratch on the screen. It was a new replacement, and I hadn't got the screen protector yet. Good thing I'm not an anal OCD-head
Stylus' (Styli?) seem to be out of fashion at the moment, but they are far more accurate for doing work in spreadsheets and other applications with lots of data on the screen.
kHiTe said:
Stylus' (Styli?) seem to be out of fashion at the moment, but they are far more accurate for doing work in spreadsheets and other applications with lots of data on the screen.
Click to expand...
Click to collapse
agreed, i have no problem being a "geek" and whipping out the stylus, especially when it magnetically snaps back in
is there a way of using stylus in capacitive screens?
Our fingers eletricity shouldnt be conducted through the stylus metal and reach the screen? Why it doesnt work?
is it true that HTC G1 is capacitive?
G1 is capacitive
Its not so much conducting electricity, more of eminating an electric field. i know there are certain "silver fingered" gloves that let you use the ipod/iphone with gloves on, and i would guess that there are capacitive styli as well, but i havent gone searching one out.
m.carroll said:
G1 is capacitive
Its not so much conducting electricity, more of eminating an electric field. i know there are certain "silver fingered" gloves that let you use the ipod/iphone with gloves on, and i would guess that there are capacitive styli as well, but i havent gone searching one out.
Click to expand...
Click to collapse
oic, that would be nice... capacitive with stylus
respider said:
is there a way of using stylus in capacitive screens?
Our fingers eletricity shouldnt be conducted through the stylus metal and reach the screen? Why it doesnt work?
is it true that HTC G1 is capacitive?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=432122
m.carroll said:
agreed, i have no problem being a "geek" and whipping out the stylus, especially when it magnetically snaps back in
Click to expand...
Click to collapse
I have been whipping it out in public since the Palm 3.
I sometimes feel that Windows Mobile doesn't make the best use of Stylus input compared to Palm OS (tap a time to create a new appointment for example) but both zip along compared to finger presses on the iPhone for most serious work.
mobiler said:
Ever since I got my brand new HTC Touch Pro I noticed the screen to be way less sensitive than my girlfriend's iPhone.
Thanks
Click to expand...
Click to collapse
it's due to the resistive touchscreen. it's less sensitive than the capacitive screen in the iphone.
but the touch pro screen is actually less sensitive than other htc resistive touchscreens such as the kaiser. it's much less sensitive e.g. near the edges of the screen because of the bezel underneath, you need to press harder at the edges to get it to register a touch.
My wife is weird. If she is around electronic things it mostly goes wrong. This is very annoying with touch screens. What can be the cause that a capacitive touch screen of a device which reacts perfectly to me hardly does to her? And more important, how to solve it? Wear wool?
Is there a way to make the touch screen more sensitive? As it is right now, I pretty frequently get touch inputs when I am actually just scrolling on the screen. I don't take my finger off (since I'm scrolling) but it thinks that I did as if I touched it. All the threads I could find talk about changing the spen sensitivity which I don't have any issues with. It's only hand touch input that I want to increase.
For comparison, with any apple device, nexus 4, or nexus 7 never get false touch input when scrolling. They never think I touched the screen when I am in the middle of scrolling.
Id recommend this one.
https://play.google.com/store/apps/details?id=br.shop4apps.touchscreenbooster.com
The sgs touchscreen booster works great for my note 10.1 8013 and my other samsung devices.
And that one doesn't work for you too good you can try this one this one works pretty good also.
https://play.google.com/store/apps/details?id=com.benja.touchscreensensit
Sent from my GT-N8000 using Tapatalk 2
Enable "show touches" in settings. It will help you see if it's a sensitivity issue or if you experience phantom touches.
Compared to the S6, the screen seems to be less sensitive. While playing games that require high accuracy, or typing, scrolling etc., it feels like I have to push slightly harder or redo a trace that wasn't registering my finger/thumb movement. Same apps, same keyboard, same games installed as my S6, but the sensitivity feels different.
Has anyone else noticed a difference in screen sensitivity?
JDM9499 said:
Compared to the S6, the screen seems to be less sensitive. While playing games that require high accuracy, or typing, scrolling etc., it feels like I have to push slightly harder or redo a trace that wasn't registering my finger/thumb movement. Same apps, same keyboard, same games installed as my S6, but the sensitivity feels different.
Has anyone else noticed a difference in screen sensitivity?
Click to expand...
Click to collapse
On my note 5 MM update screen seems much less sensitive than on LP
Sent from my SM-N920V using XDA Free mobile app
lmfao. one thread says it's way too sensitive. one thread says not sensitive. I give up on these forums hahaha
Sent from my Samsung Galaxy Note 4
I read somewhere that the previous samsung devices even without the s-pen has the sensitivity to recognise pen tips/pencils allowing the user to draw. Anyone tested this on the s7e?
I have the regular S7 and I agree, the screen is less sensitive. I can tell because I also have the S6 for comparison right now. The biggest problem is that with a screen protector, or while wearing gloves, the top/bottom and side edges become much less sensitive to touch and don't register them. Try accessing the TSP grid on your phone dialer by typing in "*#7353#" and use a glove with it on the edges. I also tried gloves with three different S7/S7 edge models at Best Buy and they all lack sensitivity. It definitely needs a software change. The screen touches don't register. Please increase the sensitivity SAMSUNG!
If anything it's much more sensitive
the issue is that the screen seems to detect quick swipes as touches, and itll open an app or something if you're swiping around/over it but you do a short burst swipe. if you do a normal long swipe, itll be fine. seems like the digitizer is setup weird on these. odd calibration maybe?
Jayochs, i know what you mean. Its especially apparent when scrolling wjth thumb. It does this flick when thumb leaves the screen.. annoying.. samsung has never been good with screen touch calibration.
mine's the other way around - way too sensitive to the touch and also the capacitive keys get triggered way too easily.. Whenever I'm scrolling through pages, the back key always accidentally gets triggered for no apparent reason.
when using glass screen protectors the sensitivity is severely reduced u kinda need to push harder on the screen to actually make it register.
I'm using "note 10 pro".
Nice device.
However, there is a "sensitivity problem" on the curved screen edges.
There are problems with the letters on the left and right sides of the keyboard.
Need to touch hard. Need to apply pressure.
There may be a software error.
Or they willingly reduced sensitivity.
How do I solve?
The edge of my screen where it starts to curve is not sensitive enough. The "1" and "0" and "a" and "p" keyboard keys are very difficult to press. I end up having to turn the phone side-ways so the screen flips making the keyboard position entirely on the flat part and not hitting the curved edge. This is very very frustrating to the point where I'm changing all passwords to not use any of those keys. Doesn't help much but a little. The phone got such great reviews but I find it very difficult to use because of the lack of sensitivity on the edges.
I don't have this issues with my 10pro. Maybe it's a broken device.
Gesendet von meinem Redmi Note 4 mit Tapatalk
Examine more carefully.
Touch the keyboard keys 10 times again in a row.
Tap hard. then soft tap.
You will notice.
Have absolutely no touch issue on my device. Zero. And I am very sensitive about things like that. I even use a UV Glue glass for it that I bought off ebay. (was bit messy to apply but I was prepared after using Whitestone glasses elsewhere.)
Aaanyhow. My device has superb sensitivity even with glass. IMO you have a faulty device.
I have also tried on different devices. they deliberately reduced the touch sensitivity on the rounded edges.
Please see in detail.
understand what I want to say.
I don't have a problem either.
I've tried it on 4 different devices.
sample:
Samsung has increased the sensitivity on the curved screen.
But it has developed a setting program for users.
xioami decreased sensitivity.
https://www.youtube.com/watch?v=Vg3s7DqNS6A
I hope it is corrected
https://c.mi.com/forum.php?mod=viewthread&tid=2819123&page=1&extra=#pid13776207
gokmenm said:
I hope it is corrected
https://c.mi.com/forum.php?mod=viewthread&tid=2819123&page=1&extra=#pid13776207
Click to expand...
Click to collapse
Really don't know mate. Never had any touch issues out of the box with the stock firmware.
Nor had any touch issues on my OnePlus 7 Pro. Nor on my GF's Note 9. Nor on her Note 10 Plus. Nor on my mother's S7 Edge.
I don't know. Maybe you have huge hands?
Ps.: I get it that YOU have a problem. All I am trying to say is ... the phone itself works perfectly. Without any touch issues. It's either you, or your device.
h8Aramex said:
Really don't know mate. Never had any touch issues out of the box with the stock firmware.
Nor had any touch issues on my OnePlus 7 Pro. Nor on my GF's Note 9. Nor on her Note 10 Plus. Nor on my mother's S7 Edge.
I don't know. Maybe you have huge hands?
Ps.: I get it that YOU have a problem. All I am trying to say is ... the phone itself works perfectly. Without any touch issues. It's either you, or your device.
Click to expand...
Click to collapse
my hands are not big
try touching the edges lightly and gently.
then tap the middle keys lightly.
You will notice.
h8Aramex said:
... Never had any touch issues out of the box with the stock firmware.
... Nor on her Note 10 Plus. Nor on my mother's S7 Edge. ...
Click to expand...
Click to collapse
Hi, I don't know about the Mi Note 10 yet, but I definitely had a similar issue with the Galaxy S7 back in the day. It used to drive me crazy, because it happened while holding it with one hand in the car, and typing the number "1" for example was often hit or miss (I am right handed, normal hands). It's part of why I don't like curved screens and why I never bought another Samsung phone (I know Samsung mostly fixed the issue through updates).
I just ordered the Mi Note 10 despite of the curved screen, because of the camera. I didn't want to buy a phone from Hauwei and didn't want to wait for Samsung's S20, and the Mi Note 10 is at a killer price
Anyway, I hope I don't run into the same curve issue (worried).
gokmenm said:
I'm using "note 10 pro".
Nice device.
However, there is a "sensitivity problem" on the curved screen edges.
There are problems with the letters on the left and right sides of the keyboard.
Need to touch hard. Need to apply pressure.
There may be a software error.
Or they willingly reduced sensitivity.
How do I solve?
Click to expand...
Click to collapse
I have no such issues.... The curve screen is more like edge.
And I am using Gboard as my keyboard and all the keys are working fine.
there is problem. make a very delicate soft touch.
Just touch the edge. tap very slowly.
also tap the middle of the screen.
there is a serious difference.
https://www.reddit.com/r/Xiaomi/comments/enp898/touch_delay_on_the_borders_of_redmi_note_8_part_2/
https://www.reddit.com/r/Xiaomi/comments/eqarbe/solution_screen_border_delay_problem/
https://www.reddit.com/r/Xiaomi/comments/eqxtjx/note_10_screen_edge_sensitivity_very_little/
I am noticing a sensitivity issue with "p"/"0" on the upper right.
It doesn't register a light touch, it needs to be pressed deliberately and slower.
It's part of the reason I don't love curved edges.
truffle1234 said:
I have no such issues.... The curve screen is more like edge.
And I am using Gboard as my keyboard and all the keys are working fine.
Click to expand...
Click to collapse
Same. Oh well, maybe SOME phones don't work that well?
Honestly I'd prefer NO curve, but I can't find an issue with it.
I hate MIUI way more that I can't make it allow my bloody notifications in DND. It's like the worst nightmare ever.
I have mi & galaxy s9+, both phone have same issue.
Samsung have a official app to fix this issue, but Mi not.
At first I try use 3rd App the disable edge touch,, but not useful like Samsung.
Now I just use a new case. The case just let my plam not possible touch on curve edge.
I recorded a sample video. We can add some programs with Turbo Game setting. We increase sensitivity. But it is not enough. We cannot select every program. Even if it is selected, it is not enough. The problem continues on the edges.
It seems to prove that this problem is a software problem.
There should be a "disable screen sensitivity limitation" button in settings
https://www.youtube.com/watch?v=v8yU614UYSg&feature=emb_title
https://www.youtube.com/watch?v=wegoCOlDxso
please watch this video. Ad-free. I'm not youtuber
There are problems with letters on the left and right side of the keyboard.
It is necessary to touch hard. It is necessary to apply pressure.
There may be a software error or willfully reduced the sensitivity.
does not want the edges to be very sensitive xiaomi. And they took a stupid measure with the software.
xda developers can solve this problem.
Then xioami takes precautions.
The problems at the lower corners are caused by the gesture control. Turn off the gesture control and use the conventional buttons, then the problem is solved.
This is also the reason why some have the problem and some don't. Not everyone uses the gesture control.
i have also noticed a reduced sensitivity with the gesture control. As soon as you switch to the buttons everything is fine with the touch screen test.
I use the buttons.
There is problem. Use as you wish There is a problem with the edges and bottom corners.
The only method: an update.
Install the program I sent. try it too.
the center and edges of the screen and the bottom corners are different.
This problem bothers me on the keyboard.
https://play.google.com/store/apps/details?id=jp.rallwell.siriuth.touchscreentest&hl=tr
I can reproduce the interrupted line test.
In the test i can place white dots on every part of the edge, but it gets only interrupted when drawing a line.
But it doesn't bother me when keyboard typing.
Keyboard works well even in the edges.
Do you use swipe typing, i'm not?
I'm using Fullscreen Gestures and never noticed any problems with edge sensitivity.
My device is Global Firmware (11.0.7), not Global EEA.