Hi, i had another tread i just don't know how to change the name , anyway if u want to take sharper picture's and video's then take the backcover off and you will see how much sharper it is I'll include one pic (8mp left) with cover on, and one without (5mp right).
you need to eat your bananas they're about to spoil...
The cover is kind of a pain to take off. It doesn't seem like it would last very long if it were taken off and on constantly.
Edit: I'm not sure if I see a difference or not?
Cover on
Cover Off
No I took the backcover off and put it in a Flex protective cover from tmobile and its still tight and nice.
samomamo said:
No I took the backcover off and put it in a Flex protective cover from tmobile and its still tight and nice.
Click to expand...
Click to collapse
If you carry it around like that you're bound to scratch the lens or damage some other part of the phone before too long.
I have that same cover BTW, I really like it.
Spyvie said:
If you carry it around like that you're bound to scratch the lens or damage some other part of the phone before too long.
I have that same cover BTW, I really like it.
Click to expand...
Click to collapse
Seriously? I think the cover makes this pretty phone look hideous.
jrwingate6 said:
Seriously? I think the cover makes this pretty phone look hideous.
Click to expand...
Click to collapse
Agreed not the best looking cover in the world there. As for the pictures the second set seemed no different though the first did. Curious Sam, are you running a custom rom or the original software?
I noticed no difference on mine at all. Did you clean the back of the backcover?
samomamo said:
Hi, i had another tread i just don't know how to change the name , anyway if u want to take sharper picture's and video's then take the backcover off and you will see how much sharper it is I'll include one pic (8mp left) with cover on, and one without (5mp right).
Click to expand...
Click to collapse
when you want to compare 2 pictures to make an example, the camera needs to be in a fixed position so you can get 2 pictures from the exact same lighting angle.
jrwingate6 said:
Seriously? I think the cover makes this pretty phone look hideous.
Click to expand...
Click to collapse
I have a thing for symmetrical faux gator skin
I'm all stock
Sent from my LG-P999 using XDA App
i also have that cover. Its ugly yes but snug and good grip.
Well anyone tried?
Sent from my LG-P999 using XDA App
Related
Am I the only one who finds it very distracting that the diamond tilts when lying on a flat surface when you're operating it?
I wonder which devil designed that back cover...
Are there flat replacements available?
the xda version got a nice flat backcover with a slip-proof surface. i like this one more than the original bling bling high gloss cover...
nice that your xda has a better cover, but where can we buy new covers......
Hmm... is there any well know company producing such stuff, so we know where to look?
My wish: a back cover like the O2 one (not glossy), but with an extra camera protection, e.g.: simply a retractable black piece of plastic would be enough.
http://www.expansys.com.au/p.aspx?i=166209
Check that out - they've listed it as a Diamond battery cover but the location of where the camera lens cover is, looks to be more like a battery cover release button. Hopefully there are flat covers coming out from HTC.
Thanks! I think it's the correct one.
N.B. The product image is for illustration only, not the actual bettery cover.
Click to expand...
Click to collapse
murks_muell said:
Thanks! I think it's the correct one.
Click to expand...
Click to collapse
Damn.. I guess still no flat back battery covers then.
Can any one who owns an XDA Diamond (the one from o2) tell me, if the see through lens cover on the flat back still lessens the quality of the camera pics, or if this has changed in comparisson to the prism version?
sandervanzijl said:
nice that your xda has a better cover, but where can we buy new covers......
Click to expand...
Click to collapse
I lost the back cover to my O2 XDAII a few years ago. I went to an O2 shop to see if I could buy one and they gave me one for free! As the display dummies have their back covers removed and an anti theft sticky pad on string attached. Maybe worth going to your local O2 store and seeing if they will give you the flat cover.
Hmm, I don't really know where to put this post and I didn't feel like my question justified a new thread. Is it possible to pop the piece of plastic, on the back of the diamond, "protecting" the camera lens, out? That should raise the quality of the camera snapshots by a nice margin.
homesteil said:
Hmm, I don't really know where to put this post and I didn't feel like my question justified a new thread. Is it possible to pop the piece of plastic, on the back of the diamond, "protecting" the camera lens, out? That should raise the quality of the camera snapshots by a nice margin.
Click to expand...
Click to collapse
this is a must...it just pops out
then you can take a good photo
its really easy to pop out too
homesteil said:
Hmm, I don't really know where to put this post and I didn't feel like my question justified a new thread. Is it possible to pop the piece of plastic, on the back of the diamond, "protecting" the camera lens, out? That should raise the quality of the camera snapshots by a nice margin.
Click to expand...
Click to collapse
sure it is possible and sure it will improved camera quality, but you will have some more dust getting into your device whitch would be the reason for me not to do so and but often clean the cam-protection.
laporte said:
sure it is possible and sure it will improved camera quality, but you will have some more dust getting into your device whitch would be the reason for me not to do so and but often clean the cam-protection.
Click to expand...
Click to collapse
To the dust issue: I'm planning on putting a thin and perfectly fitting round seal, normally used for screws, between the cover and the device
browser issue; can a mod please delete this
homesteil said:
To the dust issue: I'm planning on putting a thin and perfectly fitting round seal, normally used for screws, between the cover and the device
Click to expand...
Click to collapse
well- but then you run the danger of hurting the qualtiy cover inside the phone (the glass cover on top of the camera).
nevertheless: best would be to have a shutter - hopfully any company release a solution - soon!!!
Anyone found MDA style back cover?
Yes I too hate the shinny, wonky, non symetrical, dirt attracting back cover.
Has anyone seen the MDA (XDA) style rubberised back cover for sale? Assuming it fits of course.
esseff said:
Yes I too hate the shinny, wonky, non symetrical, dirt attracting back cover.
Has anyone seen the MDA (XDA) style rubberised back cover for sale? Assuming it fits of course.
Click to expand...
Click to collapse
mda compact iv has rounded corners, the diamond is square so cannot be interchanged.
x
Ive asked in separate thread about possibility how to customize plastic back cover. My idea was to either airbrush backcover with standard black or use special ruberized layer. But I dont know how to make that kind of layer I guess Ill have to google to find some option
Semi666 said:
Ive asked in separate thread about possibility how to customize plastic back cover. My idea was to either airbrush backcover with standard black or use special ruberized layer. But I dont know how to make that kind of layer I guess Ill have to google to find some option
Click to expand...
Click to collapse
Or something like this?
Just Got A Cheap Silicon Case Of Ebay
looks ok to me.....atleast it can't slip out my hand now
and it should bonce beter
So I was a little too rough taking off the back cover and I guess I warped it or something... Whenever I apply pressure to the back of the phone (like when you grab it) it creaks and squeaks... and it's really bothering the **** out of me
I tried searching but I just can't find any... Anyone know where I can get a replacement?
It says out of stock now buy they had them a couple days ago. Also, you have to order at least 5. http://www.globaldirectparts.com/LG-Star-P990-Optimus-2X-Battery-Door-p/lg970940.htm
Sent from my LG-P999 using XDA Premium App
allofusjw said:
It says out of stock now buy they had them a couple days ago. Also, you have to order at least 5. http://www.globaldirectparts.com/LG-Star-P990-Optimus-2X-Battery-Door-p/lg970940.htm
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
Saw that one... It's the wrong color though
I'm pretty sure that's the right color. Keep in mind that's a garbage quality picture of it and the metal piece has protective plastic over it.
booch137 said:
I'm pretty sure that's the right color. Keep in mind that's a garbage quality picture of it and the metal piece has protective plastic over it.
Click to expand...
Click to collapse
P990 (O2x) has a black back opposed to the G2x with the brown
So i have had my fair share of smartphones but I have to say that my only pet peeve about this phone is how easily it is for the lens to smudge. I constantly have to find myself wiping the lens before taking any pictures. Is anyone else also having this issue?
Lol is this thread serious?
Sent from my SCH-I535 using xda app-developers app
im so cereal right now brah
Dammit. The bottom of my shoes always get dirty. Does anyone else have this problem?
Sent from my SCH-I535 using xda premium
RCOVA said:
Dammit. The bottom of my shoes always get dirty. Does anyone else have this problem?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
You wear trash bags over your shoes problem solved =-p
blackguy101 said:
You wear trash bags over your shoes problem solved =-p
Click to expand...
Click to collapse
I lol'd
Sent from my SCH-I535 using xda premium
blackguy101 said:
So i have had my fair share of smartphones but I have to say that my only pet peeve about this phone is how easily it is for the lens to smudge. I constantly have to find myself wiping the lens before taking any pictures. Is anyone else also having this issue?
Click to expand...
Click to collapse
Maybe you should return it then. Get one with smudge free glass.
Sent from my SGS3 on Synergy Nightlies
Actually this is a good thread.
Why does not ONE single phone have a #@)*%@#ing shutter that closes over the lens? Like a regular friggin' camera. It seems so blindingly obvious. I've had to resort to using a loop made out of scotch tape to keep it from getting scratched or dirty in my pocket with all other stuff I throw in there.
Now sure maybe that'd add too much cost for phones. But what is even easier/cheaper? With less excuse?
Why do phone cases not simply have a little latched door that closes over it? Or a shutter that slides over the opening, to cover the lens and protect it? This is actually a much better question.. they have no excuse. I mean what is the purpose OF a "case" anyway? Protection.
The fact cases only have a dumb hole there and no protection is nuts. Even "good ones" don't have this. I haven't seen a single case with it... has anyone else?
Doors on the lens inevitably lead to scratches. Over time dust/dirt builds up between the lens and cover. Slide the door, scratch the lens. This is why I have an Otterbox Commuter case. The phone is already too slim to hold (for me), and the rear shell has tapered cavities for the speaker, flash, and lens. I put a thin strip of painter's tape on the back to cover the lens and flash. This is better than scotch tape since you can easily peel it off and reapply it several times, and you don't need a loop on the end which can get caught on things.
macdroid01 said:
Actually this is a good thread.
Why does not ONE single phone have a #@)*%@#ing shutter that closes over the lens? Like a regular friggin' camera. It seems so blindingly obvious. I've had to resort to using a loop made out of scotch tape to keep it from getting scratched or dirty in my pocket with all other stuff I throw in there.
Now sure maybe that'd add too much cost for phones. But what is even easier/cheaper? With less excuse?
Why do phone cases not simply have a little latched door that closes over it? Or a shutter that slides over the opening, to cover the lens and protect it? This is actually a much better question.. they have no excuse. I mean what is the purpose OF a "case" anyway? Protection.
The fact cases only have a dumb hole there and no protection is nuts. Even "good ones" don't have this. I haven't seen a single case with it... has anyone else?
Click to expand...
Click to collapse
Like bob said the dirt scratches the lense and also the space constraints I would imagine. Looking at the camera there is physically no way to put a mechnical cover on it especially since it protrudes out. It just isn't possible.
Imatoasta said:
Like bob said the dirt scratches the lense and also the space constraints I would imagine. Looking at the camera there is physically no way to put a mechnical cover on it especially since it protrudes out. It just isn't possible.
Click to expand...
Click to collapse
Well of course it's possible, but it would probably make the camera lens bump rather ungainly.
Sent from my unlocked/rooted SCH-I535 running CleanROM 1.3 using XDA Premium HD app
Jaegermeiste said:
Well of course it's possible, but it would probably make the camera lens bump rather ungainly.
Sent from my unlocked/rooted SCH-I535 running CleanROM 1.3 using XDA Premium HD app
Click to expand...
Click to collapse
They would have to make the bump way wider to house the cover when it retracts and it would look so ugly. Then they'd have to axe the little silver ring around it which would make it even uglier.
Hmm painter's tape..thank you bobj0e. Will need to get some.
Still I think cases should have a door or something. Sure the phone itself does not have room such a thing with today's tech. But cases should easily have room since they are adding thickness. Which means they are adding space between a door and the lens, there should be several mm between the two at least. Right? Doesn't it make sense some case should have such a thing, to protect the camera?
I bought a Note 3 not so long ago quite cheap because of the fact that the phone had been dropped a few times and the bezel being plastic took a lot of the damage ( Pics below )
The screen was still almost perfect apart from one small scratch on the bottom left but that will be semi hidden when i receive a glass screen protector in the post.
Any way the bezel really bothered me as I always keep my phone in as perfect condition when I own them so it really frustrated me to see how someone could treat a phone like they had, As the chrome had gone through to the white plastic underneath in a few places I decided to use my little friend ( Sandpaper and create a white bezel ) But instead I got something in between the 2 of having chrome still and white in the bezel.
Its very hard to explain so just look for yourself
Although I couldn't mask the dent on the top right completely it is now improved massively.
Your feedback would be greatly desired.
I think you've done a good job there. Probably an irrelevant thought now but could you have bought a non functioning phone off the bay and used it as a donor for yours?
joebongo said:
I think you've done a good job there. Probably an irrelevant thought now but could you have bought a non functioning phone off the bay and used it as a donor for yours?
Click to expand...
Click to collapse
I know you can buy the midframe cheap online but theres a lot of process involved having to remove the display and everything. I thought id try the diy version first before having to dismantle the phone
Could you post pics from a few more angles? Thanks.
Great work, btw.
Sent from my SM-N9005 using XDA Premium 4 mobile app
tiru.adi13 said:
Could you post pics from a few more angles? Thanks.
Great work, btw.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nice work, looks very good
Sent from my SM-N9005 using Tapatalk
excellent work man! I might have to take up this project if my bezel ever gets screwed up.
i think it looks better than the original solid bezel. congratulations on a job well done.
u did a great job really
somehow it's conforting to see that we do that instead of having the look of ugly bazels
Sent from Galaxy Note 3
Agreed. Very impressive
Sent from my SM-T320 using Tapatalk
That looks a lot better than one would expect!
I fixed mine with silver nailpolish...
Little tip for people who are afraid of the silver on the bezel eroding: Clear nailpolish. It's a trick us women do with those cheap fake silver rings, if you put clear nailpolish over it, it erodes a lot less.
ShadowLea said:
That looks a lot better than one would expect!
I fixed mine with silver nailpolish...
Little tip for people who are afraid of the silver on the bezel eroding: Clear nailpolish. It's a trick us women do with those cheap fake silver rings, if you put clear nailpolish over it, it erodes a lot less.
Click to expand...
Click to collapse
straight over the top . http://www.ebay.com.au/itm/35104900...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
maxilick said:
straight over the top . http://www.ebay.com.au/itm/35104900...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Click to expand...
Click to collapse
I'm using an Otterbox Commuter, so it's not relevant for me. But there are people who don't want a case of any form
ShadowLea said:
That looks a lot better than one would expect!
I fixed mine with silver nailpolish...
Little tip for people who are afraid of the silver on the bezel eroding: Clear nailpolish. It's a trick us women do with those cheap fake silver rings, if you put clear nailpolish over it, it erodes a lot less.
Click to expand...
Click to collapse
OHH ill have to give that one a go, im sure my sister will understand its for a good cause. The glass screen protector came today and has been installed and has completely covered up all of the small surface scratches apart from the deep one but even that doesn't look as bad anymore.
Thanks for the feedback omigo's
that is awesome job, how did you protect the other parts of the phone from the sand paper ?
Great job mate, love to see people improvising and having a go at D.I.Y mods like this.
sent from my Galaxy Note 3
xdm9mm said:
that is awesome job, how did you protect the other parts of the phone from the sand paper ?
Click to expand...
Click to collapse
That would be my question as well - I just asked myself if I'm going to do that, too, but I wonder how to make sure to get a straight line afterwards. Very nice work btw!
xdm9mm said:
that is awesome job, how did you protect the other parts of the phone from the sand paper ?
Click to expand...
Click to collapse
I cut up 400 grit sandpaper into small squares about the size of my finger. and run it it over the entire bezel at first and it didnt seem to touch the middle section so im not sure how lol. i then folded it when going around the home and volume button to ensure I got all of it. Put something over the display to stop it scratching of course
Might be tempted to see what the bezel looks like all white?
Wow! Awesome excellent job! Well done! Impressive!
:thumbup:
Sent from my N9005
This vid shows how easy and simple it seems to take apart and peel the back cover although it's on another language. Just wondering has anyone done it already. Looks kind of cool
https://youtu.be/fgLzJDmykUY
GUGUITOMTG4 said:
This vid shows how easy and simple it seems to take apart and peel the back cover although it's on another language. Just wondering has anyone done it already. Looks kind of cool
https://youtu.be/fgLzJDmykUY
Click to expand...
Click to collapse
watch the jerry rig everything teardown. he does the same to his device. you will probably lose any water resistance though since you are tearing up the adhesive strip that holds the back panel on.
Get a case with a clear back, and have a custom skin made with the insides.
Put the skin on the back of the phone and the case on top.
They'll sell it on witrigs soon enough for like $45US
tech_head said:
Get a case with a clear back, and have a custom skin made with the insides.
Put the skin on the back of the phone and the case on top.
Click to expand...
Click to collapse
That would kinda work although it's too easy and fake.
I probably will if I break my back plate, because at that point, why not? I did it to my Samsung S8+, and loved it.
I won't be removing the back of the phone just to do it though. I prefer water resistance.
https://www.slickwraps.com/transparent-series-skins.html
init_dot_t said:
https://www.slickwraps.com/transparent-series-skins.html
Click to expand...
Click to collapse
that look crazy real. thanks for the link
init_dot_t said:
https://www.slickwraps.com/transparent-series-skins.html
Click to expand...
Click to collapse
GUGUITOMTG4 said:
that look crazy real. thanks for the link
Click to expand...
Click to collapse
I just ordered one of these for my 7 Pro and S10+.
I'll post pictures once I receive them (could take awhile based on Slick Wraps history)