[Q] Help!!! New Samsung Galaxy Fit Bricked. - Android Software/Hacking General [Developers Only]

So i got a brand new Samsung Galaxy Fit S5670 and I turned it on to check if its working,(it did) played with it for like 10 minutes all was good. so i turn it off, put in a Sim Card, a 2G memory card, and connected it to the computer to put songs in it but it wouldnt turn on. i tried taking out the battery for 10 min and putting it back, but still nothing.
Notes
*This is my first samsung phone
*Kies detects it when i connect it but its stuck on connecting.
*Odin also detects it but i dont know how to use it (I dont know how to use Odin AT ALL)
Please guys I need urgent HELP!!!!

odin is really quite easy. if you have it detected you have the hard part accomplished. now you just find the files you need for your phone. i'm sorry i dont know where they are, i'm a vibrant owner. but you would end up with a .pit a .tar or .tar.md5 and perhaps more files. load them each into the place they obviously belong in odin and hit go.

U can find Galaxy FIT firmware files at samfirmware.com
Download them and use odin to flash ur device.

I just downloaded the file from samfirmware, i got 4 tar.md5 files,
odin 4.38 and an OPS file but i dont know how to use odin at all,
if someone could explain id be very happy(and 10 times happier if it would fix the phone)

Select ops file in OPS section.
In boot section select APBOOT.
In Phone section select MODEM.
In PDA section select CODE.
and last
In CSC section select CSC.
connect ur device and click START.

Thanks allot dude ill try it
EDIT: Crap when upload the "CODE_S5670XWKA3_CL878390_REV01_user_low_true.tar.md5" file to PDA
Odin crashes, but i tryed clicking start even without the PDA but its stuck on "Setup connection..."
*I saw somewhere you need to put the phone on download mode, but i cant do that my phone doesnt do anything when i hold Up/Down + Power + Home i tryed and tryed but nothing.

hold volume down + home and switch on ur phone.
Not Up/Down + Power + Home.

You dont get it, i tryed both:
Up + Power + Home AND Down + Power + Home
But it wont help since there isnt any display nor voice

you still don't get it ...
hold ....
volume down + home + power ( in this order i think )
NOT
voulme down + power + home ( i think the order count )

use odin instead of kies. Kies is ****

Spiider11 i tryed both and it still doesnt put it in download mode.
Taranfx I am using odin I just dont know how to use it and im getting some errors

Last option for u. Go to samsung service centre.

To get into download mode power off and take out battery. Plug in usb cable and Hold volume down and home I guess for the fit (mesmerise is just volume down) now place your battery back in while holding the buttons. That usually does it if you've got your key combo correct.
Sent from my SGH-T959 using XDA Premium App

xdaver said:
Thanks allot dude ill try it
EDIT: Crap when upload the "CODE_S5670XWKA3_CL878390_REV01_user_low_true.tar.md5" file to PDA
Odin crashes, but i tryed clicking start even without the PDA but its stuck on "Setup connection..."
*I saw somewhere you need to put the phone on download mode, but i cant do that my phone doesnt do anything when i hold Up/Down + Power + Home i tryed and tryed but nothing.
Click to expand...
Click to collapse
Im not sure about uploading the md5 file..are u sure..u could post a screebshot of odin with all the files chosen....
Sent from my GT-P1000 using XDA App

U can find Galaxy FIT firmware files at samfirmware.com
Download them and use odin to flash ur device.

I have just tried..
VolDown + Home + Power works fine...
see this guide if u havent...

I made a new theme for galaxy fit stock rom.
Honeycomb theme.
U can see screenshot and download from here.
http://forum.xda-developers.com/show...3#post14287133

Related

Stuck on ATT World Phone screen

Phone is stuck on att white world phone logo and is not going to download mode by holding the volume buttons and power, and or volume down and power.
When i hold the buttons and plug it in and all i see is a damn battery that goes on then off. Odin is open and does seem change.
All this just to get some bloatware and fix a gps.
Try the third option which is the only one works for me:
1. Take battery out and put back
2. Hold both Vol buttons. Don't touch the power button.
3. Plug in the USB cable to your PC. Don't touch the power button.
Your phone should boot into download mode right away. Remember, don't ever touch the power button.
WOW
wow dude perfect you saved me from freaking out! hah SOLVED thanks a million bad power button!
You're welcome. There is now even another hardware hack that can force the phone into download mode even if none of the buttons work. It is posted in i9000 forum.
foxbat121 said:
You're welcome. There is now even another hardware hack that can force the phone into download mode even if none of the buttons work. It is posted in i9000 forum.
Click to expand...
Click to collapse
do you mind posting a link plz?
no button configuration is putting my phone in d/l mode...
tried odin for the first time and now i can't get past the damn 'world phone' screen.
Just do a search for captivate jig
kang0saur said:
do you mind posting a link plz?
no button configuration is putting my phone in d/l mode...
tried odin for the first time and now i can't get past the damn 'world phone' screen.
Click to expand...
Click to collapse
Look in my sig.
Entering Download Mode but odin not working
I can get in to download mode but when I open odin3 there is nothing in the text boxes and when I press start it just says all threads completed 0/0 failed. And does the same thing for master clear.
When I turn the phone on with SIM in and hold the up/down + power it enters the clockwork stuff and I have tried the restore default option and recovery option. I was hoping download mode would help but didn't.
If anybody can help it would be much appreciated.
Thanks
evedavis58 said:
I can get in to download mode but when I open odin3 there is nothing in the text boxes and when I press start it just says all threads completed 0/0 failed. And does the same thing for master clear.
When I turn the phone on with SIM in and hold the up/down + power it enters the clockwork stuff and I have tried the restore default option and recovery option. I was hoping download mode would help but didn't.
If anybody can help it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Here is the procedure you need to follow:
1. Install the proper driver so that ODIN can see your phone when plugged in. Drivers are listed in the thread where you download ODIN.
2. Open ODIN with phone not attached. Select the firmware file (*.rar) you want to flash in PDA field.
3. Power off the phone and enter into download mode and connect the phone to PC.
4. Wait for the driver to install and your phone recognized. It will show up in one of the boxes in ODIN.
5. Once your phone is recognized, press Start button on ODIN to start the flash process.
6. Leave the PC and phone alone for a few minutes and pray (that your phone didn't get bricked in the process).
Ok I got it to recognize but I don't know what (*.rar) I am supposed to flash. Do i just put the cognition folder in it or what.
Thanks for the reply
I want to flash cognition but when i press pdf on odin3 it doesn't see it...any ideas?
Cog does not use Odin. Just get clockwork recovery and install it. Then boot into recovery and flash cog. Go to stickies in dev section, there are guides.
I try to select cognition.rar but says it needs a .tar file. What do I do to make it work?
Cog does not install with Odin unless dg added that. You need to unrar it. Download winrar and extract it, see what's inside.
Sent from my Captivate using XDA App
This guide lays it out pretty well. http://forum.xda-developers.com/showthread.php?t=884364
Personally, here's what I use to do. Go to the Dev section and search for ClockworkMod Recovery. Search that thread for the update.zip. I'm sure it's in there. Put the update.zip on your internal storage, ie, when you plug phone into pc with USB the thing you mount and store file on, not an added SD card.
Boot into stock recovery. Choose reinstall packages, it reboots. Choose reinstall packages again, now your in Clockwork. Choose > install zip from sdcard > choose zip file > then navigate to Cognition (assuming you've put that on your internal storage also) and select it. It flashes, choose reboot. Bam! You're running Cognition.
evedavis58 said:
Ok I got it to recognize but I don't know what (*.rar) I am supposed to flash. Do i just put the cognition folder in it or what.
Thanks for the reply
Click to expand...
Click to collapse
evedavis58 said:
I want to flash cognition but when i press pdf on odin3 it doesn't see it...any ideas?
Click to expand...
Click to collapse
You two need to read more before risking your phone. I sense you soon to have two very expensive bricks on your hand.

Galaxy ACE Wont boot :[

I have Galaxy ace
I wanted to switch to 2.3.3, so I downloaded the software ROM manager did flash. He asked me to pick and chose just Pelephone Pelephone, he wrote that he succeeded. After Flash went to Backup (backup), I clicked, boom turned off. I gave him a minute or two That's it.
BY THE WAY, you know what this Emergency MOD? Computer can recognize it is about this situation.
help?plzzzzzzzzzzzzzz
it seems that you tried to show some intelligence in flashing rom
who said you to flash with rom manager when the site clearly stated that you have to use odin to flash rom.
the only thing now you can try is putting you phone in download mode and flash with odin and follow the flash guide directions below-
1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 4.38 on your PC
5) Select from extracted archive: OPS, Boot, Phone, PDA, CSC (leave EFS and One Package empty)
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar.md5
6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
8) If ODIN detected and recognised your phone should light up the first square to the left side
9) Press "Start" button and wait, the process should take 5-10 minutes
10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
12) Disconnect your phone
13) Turn off your phone
14) Insert your SIM Card and SD Card again
15) Turn on your phone
16) Now you have the newest firmware!
Hey dude
tnx for hlp,but he dont get into download mode and recovery mod.
he Not Responding for nothing.
when i try to turn it on,recovery mod.download mod, he wont boot.
sorry to say but i think you bricked or semi-bricked your ace...
i got more then less same problem..
just have my galaxy ace GT-S5830
needed restart.. try turn on again... only thing he did was buzzing and samsung came in the screen lightning on and off... but wasnt able to continue to normal android menu...
i try a restart now
in small yellow i see downloading.. hope it works..
else i bring it back to the shop.. phone is just 1!! day old
guddu2011 said:
sorry to say but i think you bricked or semi-bricked your ace...
Click to expand...
Click to collapse
How to solve bricked SGA?
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
alstonleo said:
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
Click to expand...
Click to collapse
Facing the same problem, the critical point the mobile does not respond to power up (either turning on, recovery mode or even download mode), any help please??? I got this mobile less than month now
Samsung Galaxy Ace Wont Boot!!
when i press the power button of my galaxy ace, baring in mind the battery has charge, the empty battery indicator comes up and then the phones turns off straight away. i have tried flashing different versions of android hoping it was a buggy firmware but no luck. this also happens when plugging the phone into an ac power supply. any help?????????
If you cannot access the download mode or the recovery mode then your phone is bricked. All what you can do is go to the service center and pull up a nice story about how it happened while you were sleeping. If you are lucky enough, you will get a replacement.
Btw WRONG THREAD. THERE IS A SEPARATE ONE FOR THE ACE.
TeamCooper Developer
TheMyth Developer
www.teamcooper.net
Galaxy ACE only displaying the word "Android"
Same problem here, only I use Ubuntu 12 and was wondering if there is a way of re-flashing using download mode and Ubunu?

[Q] Galaxy Fit BRICKED!!!!!!!!!!!

Guys need serious technical help..............................
i have rooted my phone with super one click all things were going fine.installed rom manager to backup my stock ROM and committed a mistake and installed wrong cwm and tried to backup my stock rom.selecting the backup option it Suppose reboot my phone in download mode which doesn't happen. and now i dose not have any access to my phone.
I searched whole forum and haven't found any solution.please help me.
Need guidance..
download and install pratyush.creed rom using odin and ur phone will be fine again
Bricked Screen (A.K.A. phone-!-pc or Black Screen of Death)
To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death:A fully bricked phone will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector, modified with a 301k resistor as showed in this video:
http://www.youtube.com/watch?v=GjDkShT-65Y
Source:http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
The solution in green will work for you
Thanks,
Spike
Press the Thanks button if this helped
raj3534 said:
download and install pratyush.creed rom using odin and ur phone will be fine again
Click to expand...
Click to collapse
Like i said my phone doesn't boot in downlode menu.odin will not find my port.
any other suggestion....................please
spike1902 said:
Bricked Screen (A.K.A. phone-!-pc or Black Screen of Death)
To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death:A fully bricked phone will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector, modified with a 301k resistor as showed in this video:
http://www.youtube.com/watch?v=GjDkShT-65Y
Source:http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
The solution in green will work for you
Thanks,
Spike
Press the Thanks button if this helped
Click to expand...
Click to collapse
i have gone though this thread.................this wont help in my case.but thanx for reply
And my S5670 is Death
I have one problem. The phone do not want to enter in download mode or recovery, and the screen is always black and don't vibrating.
I was flashing it and somewhere it block and after that it do not start.
I connected to PC and when i press:
- Home + Power don't enter in recovery mode and the PC don't see it.
- Volume Down + Home + Power don't enter in download mode and PC don't see it
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
I will try and with the modified resistor but when i will be home.
If you are any suggestion or another software or u want to try something i am in the mood to try all. I buy the phone for testing
If i find something else i will post.
antsmaster said:
I have one problem. The phone do not want to enter in download mode or recovery, and the screen is always black and don't vibrating.
I was flashing it and somewhere it block and after that it do not start.
I connected to PC and when i press:
- Home + Power don't enter in recovery mode and the PC don't see it.
- Volume Down + Home + Power don't enter in download mode and PC don't see it
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
I will try and with the modified resistor but when i will be home.
If you are any suggestion or another software or u want to try something i am in the mood to try all. I buy the phone for testing
If i find something else i will post.
Click to expand...
Click to collapse
I am facing the same problem when i press
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
Do i Need to goto customer care...............is it the final option....................
I talked to someone and he said to pres hold 3 buttons Vol Down + Home + power then insert battery and after that should appear the Download mode. I'm not have the phone whit me but i will try at home. if u succeed that and bring to life your phone let me know
i already tried that,it dosen't seems to work.
Just flash it again via odin with any firm or rom n ur phone will be fine....
just flash it properly....
thats it..
rajrocks said:
Just flash it again via odin with any firm or rom n ur phone will be fine....
just flash it properly....
thats it..
Click to expand...
Click to collapse
i think u have not gone through all the above posts......................i made this clear that my phone is not booting in download menu
vol down+home+power <----this combo keys are not working.
Anyways thank u for reply.............
stuck on flashing.........................
when i pressed vol up+home+power,the port was found by odin but it dose not start flashing
I try and schema whit modified resistor but nothing. i measured the level of battery it was at 2,4 V after some seconds it down to 0. Maybe it the battery? i charge all the night and next day i put on USB on PC all the day before it die. Maybe i broke the battery and no phone?
antsmaster said:
I try and schema whit modified resistor but nothing. i measured the level of battery it was at 2,4 V after some seconds it down to 0. Maybe it the battery? i charge all the night and next day i put on USB on PC all the day before it die. Maybe i broke the battery and no phone?
Click to expand...
Click to collapse
i dont think battery is problem in my case.i have checked my handset by replacing battery to.
Now i think service center is the last option.i'll visit there latest by tommorow.
If you send it to the service, please after they send back to you the phone, post what they do to the phone (change motherboard or change another piece or just flash it) Thanks.
antsmaster said:
If you send it to the service, please after they send back to you the phone, post what they do to the phone (change motherboard or change another piece or just flash it) Thanks.
Click to expand...
Click to collapse
i changed my decision and visited service center today instead of tomorrow. when i handovered handset to them they inspected the handset i front of me. they disassembled handset gone through it.finally they told me that "we will try to resolve your problem with software, and the problem is not resolved then they will change(replace) the board.
lets see what they will do.i'll inform u what they did to my handset..............................
I think u need to go to customer care. (even i bricked my phone once...) but never ever accept that uve rooted ur phone... Thats wat i did... and i got my phone repaired without any further issues!
Sent from my GT-S5670 using XDA App
hi every one.......i saw this post now...........i too faced this problem.......its a hardware problem.....i took my mobile to service center they changed the mother board.......a preadvice never ever try anything with rom manager.....its the main culprit......
used rom manager without any problem with my previous phone.......didn't face any problem......but i didn't know that CMD is currently not working with fit.........

[Q] Bricked my I9001?

Hey guys,
I tried to install TW4 but that didnt worked for me.
Now i only have a black sreen when the phone starts.
And i cant get Odin to work because i cant connect the phone to the pc with usb.. i only can get in boot mode.
Anyone know a soluction to my problem?
Can you get to Download mode...home+volumedown+power button combination??
Is that the same way as going into boot mode?
instead pushing vol.up button i need to push vol.down button?
Edit:
Yes i can get in download mode
DarkRaver84 said:
Is that the same way as going into boot mode?
instead pushing vol.up button i need to push vol.down button?
Edit:
Yes i can get in download mode
Click to expand...
Click to collapse
so if you can enter download mode there is no problem, just install new rom ...
when i try to install a new rom with odin it gives me a massege "connect a telephone" but it is connected through usb..
i got the ops file in odin and by "one package" i put the md5 file.
But then i get that massege "connect a telephone"
Try an other USB-port, make sure Kies is not running and use Odin 4.43.
i dont have kies on the computer and i use odin 4.43.
i tried another usb port but no changes..
DarkRaver84 said:
i dont have kies on the computer and i use odin 4.43.
Click to expand...
Click to collapse
But Kies includes drivers for the phone - so do you have properly installed drivers for your phone?
OT: Is there a chance to take back given "Thanks"? I accidentally pressed "thanks" instead of "quote"
reneph said:
But Kies includes drivers for the phone - so do you have properly installed drivers for your phone?
OT: Is there a chance to take back given "Thanks"? I accidentally pressed "thanks" instead of "quote"
Click to expand...
Click to collapse
Yes i have the standerd samsung mobile driver installed and it worked before i installed tw4 witch diddnt worked for me.
DarkRaver84 said:
Yes i have the standerd samsung mobile driver installed and it worked before
Click to expand...
Click to collapse
Yeah but such a problem seems to occur relative often.
I would try to reinstall drivers, maybe with the Kies-drivers or use another computer.
I have similar problem. There is the same symptoms.
I have try:
- other usb ports
- other drivers (original samsung / kies drivers)
- other pc
- kill kies processes
- misc roms
and.. nothing..
I cant get recovery mode.. There is ramdump mode instead of recovery :/
Actually my i9001 is bricked and I cant load any rom..
Maybe my sgs is locked by bootloader or something?
if ure entering ramdump mode then u dont have the correct combination of buttons down when booting up:
Vol + / Power = Recovery Mode
Vol + / Home / Power = Ramdump Mode
Vol - / Home / Power = Download Mode
cheers
jbmc83 said:
if ure entering ramdump mode then u dont have the correct combination of buttons down when booting up:
Vol + / Power = Recovery Mode
Vol + / Home / Power = Ramdump Mode
Vol - / Home / Power = Download Mode
cheers
Click to expand...
Click to collapse
At least your guide on how to get to recovery is a big fail. That works with I9000, not I9001. Vol + / Power, WHEN the samsung text appears, release both buttons. AND when the lights in the softkeys turn on, quickly tap MENU, that's how to boot to recovery mode
well sorry if i left that part out, i assumed he would know how to navigate the recovery mode once he actually got the button combo right. and the only fail here is ur rude attitude, deff. no need for that around here imho.
aside from that, all these instructions are correct.
cheers
Sent from my GT-I9001 using XDA App
I solved the problem.
Unfortunately not on my PC. My i9001 needed a box which I solved all mistakes.
Now I have Gingerbread with root
Unfortunately I still hav a problem with my PC which doesn't want connect with sgs.. :/
I will try trial and error method.

Galaxy Fit Problem!!!

Ok let me begin by saying i have problems with my phone like in touch screen doesn`t work at all,capacitive buttons (touch buttons near home button) don`t work after i flashed without knowing s5570 firmware ( a lot of them before i figured out i had s5670) then a lot of s5670 firmwares but still no success ((( what is there do to in this case ? Phone boots every time but can`t use touch screen and the two side buttons that stand for back and settings on screen i think. Power button works and volume aswell. Please help !!!!
casmirf said:
Ok let me begin by saying i have problems with my phone like in touch screen doesn`t work at all,capacitive buttons (touch buttons near home button) don`t work after i flashed without knowing s5570 firmware ( a lot of them before i figured out i had s5670) then a lot of s5670 firmwares but still no success ((( what is there do to in this case ? Phone boots every time but can`t use touch screen and the two side buttons that stand for back and settings on screen i think. Power button works and volume aswell. Please help !!!!
Click to expand...
Click to collapse
Since ur touch doesn't work anymore, switch it off by removing battery. Now,
*Requirements:- Samsung Drivers, Odin.exe, BENI_v1.0.ops, firmware package.
1. Re-insert the battery & go for download mode by pressing & keep holding Volume Down+Home+Power buttons together. Yellow triangle appears with downloading written below it.
2. Install Samsung mobile drivers in pc.
3. Connect ur phone in download mode to pc via USB cable. Let the pc ensures ur phone to be "ready to use". Then open Odin.exe & see the COM PORT mapping box will turn yellow(indicating that ur phone is connected successfully)
4. Place BENI_v1.0.ops under OPS field & the .tar.md5 file under One Package. Click start, wait for ~10mins till done.
5. Now again remove & re-insert battery. Press & hold Home+Power buttons to enter stock recovery. Wipe data & cache there & reboot.
Problem solved...
Do let me know if u want links for certain files
Sent Via XDA™ Premium
Galaxy_Rohit said:
Since ur touch doesn't work anymore, switch it off by removing battery. Now,
*Requirements:- Samsung Drivers, Odin.exe, BENI_v1.0.ops, firmware package.
1. Re-insert the battery & go for download mode by pressing & keep holding Volume Down+Home+Power buttons together. Yellow triangle appears with downloading written below it.
2. Install Samsung mobile drivers in pc.
3. Connect ur phone in download mode to pc via USB cable. Let the pc ensures ur phone to be "ready to use". Then open Odin.exe & see the COM PORT mapping box will turn yellow(indicating that ur phone is connected successfully)
4. Place BENI_v1.0.ops under OPS field & the .tar.md5 file under One Package. Click start, wait for ~10mins till done.
5. Now again remove & re-insert battery. Press & hold Home+Power buttons to enter stock recovery. Wipe data & cache there & reboot.
Problem solved...
Do let me know if u want links for certain files
Sent Via XDA™ Premium
Click to expand...
Click to collapse
If don't go with stock ROM with 1 file, he can try with stock ROM with 4 files.
Please post in the correct forum next time, all problems and questions should go in Galaxy Fit GT 5670 Q&A, Help & Troubleshooting
No go ... Tried like 1000000 milion times not working what can i do ? Like I said i have the phone from Romania i tried even downgrading to froyo ... nothing works(( help i think i have blocked bootloader coz even when i installed froyo same bootlogo went up .... what is there to do in this stage?
Please read the forum rules before posting
Questions belong in the Q&A section
Thread moved.
Towle
XDA Moderator
casmirf said:
No go ... Tried like 1000000 milion times not working what can i do ? Like I said i have the phone from Romania i tried even downgrading to froyo ... nothing works(( help i think i have blocked bootloader coz even when i installed froyo same bootlogo went up .... what is there to do in this stage?
Click to expand...
Click to collapse
Give it to SSC
Sent Via XDA™ Premium

Categories

Resources