Ok let me begin by saying i have problems with my phone like in touch screen doesn`t work at all,capacitive buttons (touch buttons near home button) don`t work after i flashed without knowing s5570 firmware ( a lot of them before i figured out i had s5670) then a lot of s5670 firmwares but still no success ((( what is there do to in this case ? Phone boots every time but can`t use touch screen and the two side buttons that stand for back and settings on screen i think. Power button works and volume aswell. Please help !!!!
casmirf said:
Ok let me begin by saying i have problems with my phone like in touch screen doesn`t work at all,capacitive buttons (touch buttons near home button) don`t work after i flashed without knowing s5570 firmware ( a lot of them before i figured out i had s5670) then a lot of s5670 firmwares but still no success ((( what is there do to in this case ? Phone boots every time but can`t use touch screen and the two side buttons that stand for back and settings on screen i think. Power button works and volume aswell. Please help !!!!
Click to expand...
Click to collapse
Since ur touch doesn't work anymore, switch it off by removing battery. Now,
*Requirements:- Samsung Drivers, Odin.exe, BENI_v1.0.ops, firmware package.
1. Re-insert the battery & go for download mode by pressing & keep holding Volume Down+Home+Power buttons together. Yellow triangle appears with downloading written below it.
2. Install Samsung mobile drivers in pc.
3. Connect ur phone in download mode to pc via USB cable. Let the pc ensures ur phone to be "ready to use". Then open Odin.exe & see the COM PORT mapping box will turn yellow(indicating that ur phone is connected successfully)
4. Place BENI_v1.0.ops under OPS field & the .tar.md5 file under One Package. Click start, wait for ~10mins till done.
5. Now again remove & re-insert battery. Press & hold Home+Power buttons to enter stock recovery. Wipe data & cache there & reboot.
Problem solved...
Do let me know if u want links for certain files
Sent Via XDA™ Premium
Galaxy_Rohit said:
Since ur touch doesn't work anymore, switch it off by removing battery. Now,
*Requirements:- Samsung Drivers, Odin.exe, BENI_v1.0.ops, firmware package.
1. Re-insert the battery & go for download mode by pressing & keep holding Volume Down+Home+Power buttons together. Yellow triangle appears with downloading written below it.
2. Install Samsung mobile drivers in pc.
3. Connect ur phone in download mode to pc via USB cable. Let the pc ensures ur phone to be "ready to use". Then open Odin.exe & see the COM PORT mapping box will turn yellow(indicating that ur phone is connected successfully)
4. Place BENI_v1.0.ops under OPS field & the .tar.md5 file under One Package. Click start, wait for ~10mins till done.
5. Now again remove & re-insert battery. Press & hold Home+Power buttons to enter stock recovery. Wipe data & cache there & reboot.
Problem solved...
Do let me know if u want links for certain files
Sent Via XDA™ Premium
Click to expand...
Click to collapse
If don't go with stock ROM with 1 file, he can try with stock ROM with 4 files.
Please post in the correct forum next time, all problems and questions should go in Galaxy Fit GT 5670 Q&A, Help & Troubleshooting
No go ... Tried like 1000000 milion times not working what can i do ? Like I said i have the phone from Romania i tried even downgrading to froyo ... nothing works(( help i think i have blocked bootloader coz even when i installed froyo same bootlogo went up .... what is there to do in this stage?
Please read the forum rules before posting
Questions belong in the Q&A section
Thread moved.
Towle
XDA Moderator
casmirf said:
No go ... Tried like 1000000 milion times not working what can i do ? Like I said i have the phone from Romania i tried even downgrading to froyo ... nothing works(( help i think i have blocked bootloader coz even when i installed froyo same bootlogo went up .... what is there to do in this stage?
Click to expand...
Click to collapse
Give it to SSC
Sent Via XDA™ Premium
Related
I have Galaxy ace
I wanted to switch to 2.3.3, so I downloaded the software ROM manager did flash. He asked me to pick and chose just Pelephone Pelephone, he wrote that he succeeded. After Flash went to Backup (backup), I clicked, boom turned off. I gave him a minute or two That's it.
BY THE WAY, you know what this Emergency MOD? Computer can recognize it is about this situation.
help?plzzzzzzzzzzzzzz
it seems that you tried to show some intelligence in flashing rom
who said you to flash with rom manager when the site clearly stated that you have to use odin to flash rom.
the only thing now you can try is putting you phone in download mode and flash with odin and follow the flash guide directions below-
1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 4.38 on your PC
5) Select from extracted archive: OPS, Boot, Phone, PDA, CSC (leave EFS and One Package empty)
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar.md5
6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
8) If ODIN detected and recognised your phone should light up the first square to the left side
9) Press "Start" button and wait, the process should take 5-10 minutes
10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
12) Disconnect your phone
13) Turn off your phone
14) Insert your SIM Card and SD Card again
15) Turn on your phone
16) Now you have the newest firmware!
Hey dude
tnx for hlp,but he dont get into download mode and recovery mod.
he Not Responding for nothing.
when i try to turn it on,recovery mod.download mod, he wont boot.
sorry to say but i think you bricked or semi-bricked your ace...
i got more then less same problem..
just have my galaxy ace GT-S5830
needed restart.. try turn on again... only thing he did was buzzing and samsung came in the screen lightning on and off... but wasnt able to continue to normal android menu...
i try a restart now
in small yellow i see downloading.. hope it works..
else i bring it back to the shop.. phone is just 1!! day old
guddu2011 said:
sorry to say but i think you bricked or semi-bricked your ace...
Click to expand...
Click to collapse
How to solve bricked SGA?
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
alstonleo said:
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
Click to expand...
Click to collapse
Facing the same problem, the critical point the mobile does not respond to power up (either turning on, recovery mode or even download mode), any help please??? I got this mobile less than month now
Samsung Galaxy Ace Wont Boot!!
when i press the power button of my galaxy ace, baring in mind the battery has charge, the empty battery indicator comes up and then the phones turns off straight away. i have tried flashing different versions of android hoping it was a buggy firmware but no luck. this also happens when plugging the phone into an ac power supply. any help?????????
If you cannot access the download mode or the recovery mode then your phone is bricked. All what you can do is go to the service center and pull up a nice story about how it happened while you were sleeping. If you are lucky enough, you will get a replacement.
Btw WRONG THREAD. THERE IS A SEPARATE ONE FOR THE ACE.
TeamCooper Developer
TheMyth Developer
www.teamcooper.net
Galaxy ACE only displaying the word "Android"
Same problem here, only I use Ubuntu 12 and was wondering if there is a way of re-flashing using download mode and Ubunu?
So i got a brand new Samsung Galaxy Fit S5670 and I turned it on to check if its working,(it did) played with it for like 10 minutes all was good. so i turn it off, put in a Sim Card, a 2G memory card, and connected it to the computer to put songs in it but it wouldnt turn on. i tried taking out the battery for 10 min and putting it back, but still nothing.
Notes
*This is my first samsung phone
*Kies detects it when i connect it but its stuck on connecting.
*Odin also detects it but i dont know how to use it (I dont know how to use Odin AT ALL)
Please guys I need urgent HELP!!!!
odin is really quite easy. if you have it detected you have the hard part accomplished. now you just find the files you need for your phone. i'm sorry i dont know where they are, i'm a vibrant owner. but you would end up with a .pit a .tar or .tar.md5 and perhaps more files. load them each into the place they obviously belong in odin and hit go.
U can find Galaxy FIT firmware files at samfirmware.com
Download them and use odin to flash ur device.
I just downloaded the file from samfirmware, i got 4 tar.md5 files,
odin 4.38 and an OPS file but i dont know how to use odin at all,
if someone could explain id be very happy(and 10 times happier if it would fix the phone)
Select ops file in OPS section.
In boot section select APBOOT.
In Phone section select MODEM.
In PDA section select CODE.
and last
In CSC section select CSC.
connect ur device and click START.
Thanks allot dude ill try it
EDIT: Crap when upload the "CODE_S5670XWKA3_CL878390_REV01_user_low_true.tar.md5" file to PDA
Odin crashes, but i tryed clicking start even without the PDA but its stuck on "Setup connection..."
*I saw somewhere you need to put the phone on download mode, but i cant do that my phone doesnt do anything when i hold Up/Down + Power + Home i tryed and tryed but nothing.
hold volume down + home and switch on ur phone.
Not Up/Down + Power + Home.
You dont get it, i tryed both:
Up + Power + Home AND Down + Power + Home
But it wont help since there isnt any display nor voice
you still don't get it ...
hold ....
volume down + home + power ( in this order i think )
NOT
voulme down + power + home ( i think the order count )
use odin instead of kies. Kies is ****
Spiider11 i tryed both and it still doesnt put it in download mode.
Taranfx I am using odin I just dont know how to use it and im getting some errors
Last option for u. Go to samsung service centre.
To get into download mode power off and take out battery. Plug in usb cable and Hold volume down and home I guess for the fit (mesmerise is just volume down) now place your battery back in while holding the buttons. That usually does it if you've got your key combo correct.
Sent from my SGH-T959 using XDA Premium App
xdaver said:
Thanks allot dude ill try it
EDIT: Crap when upload the "CODE_S5670XWKA3_CL878390_REV01_user_low_true.tar.md5" file to PDA
Odin crashes, but i tryed clicking start even without the PDA but its stuck on "Setup connection..."
*I saw somewhere you need to put the phone on download mode, but i cant do that my phone doesnt do anything when i hold Up/Down + Power + Home i tryed and tryed but nothing.
Click to expand...
Click to collapse
Im not sure about uploading the md5 file..are u sure..u could post a screebshot of odin with all the files chosen....
Sent from my GT-P1000 using XDA App
U can find Galaxy FIT firmware files at samfirmware.com
Download them and use odin to flash ur device.
I have just tried..
VolDown + Home + Power works fine...
see this guide if u havent...
I made a new theme for galaxy fit stock rom.
Honeycomb theme.
U can see screenshot and download from here.
http://forum.xda-developers.com/show...3#post14287133
Just today i was connected to my wifi, downloaded a software, 'Expense IT pro' from apktop.com but before completing the install process i terminated it. then i was manually updating cases in 'prognosis' software and suddenly the phone freezes. thought it was usual, so i pressed the power key for a long time and while booting it got stuck in the only samsung logo that glows.
i'm in Bangladesh and the phone was on indian (DD) firmware. battery is shown while charging. i tried to factory reset it (vol up+ power+ home) but nothing is showing up. if i take it to the service center they might take a long time, so i'm planning to flash it with odin. here i need ur help guys coz i'm new:
1. if i flash with European(xx) firmware, first xxkpe then xxkph, will it have any problem in my region, detecting APNs? or something?
2. is there any way to factory reset it without flash via pc, as 3 button is not working for me
3. will it void my warranty?
4. can i use my previous SD card without formatting and install apks from there?
5. i just want my phone back! plz help!!
1 u can use that & choose english as ur language!
2 adb
3 no
4 u can install apk files & have access to multimedia not other things
5 possible!!!
try to read the board full it answers all ur queries
[i9003][help]How to post in the Q&A section?
Create a thread for that first...THrow this this to the Q&A
Hi Friends,
i had my galaxy gt-i9003 upgraded to gingerbread official rom i downloaded from xda, i have a few problems like phone going into sleep and camera not functioning, i wanted to role back to fyro but i cant get into the download mode anymore, it says POWER RESET or UNKNOWN DOWNLOAD MODE.
Please help.
Which Firmware did you flash? And, are you seeing any logo when you go to the download mode or is tit that only the text is appearing?
And DO POST THIS IN THE Q&A SECTION HENCEFORTH!
mdpasha78 said:
Hi Friends,
i had my galaxy gt-i9003 upgraded to gingerbread official rom i downloaded from xda, i have a few problems like phone going into sleep and camera not functioning, i wanted to role back to fyro but i cant get into the download mode anymore, it says POWER RESET or UNKNOWN DOWNLOAD MODE.
Please help.
Click to expand...
Click to collapse
You need to press VOL - first, then press HOME key without letting go of VOL -, then press POWER button. When you feel the unit vibrates you can let go of POWER button until Downloading mode is displayed.
hi,
i do c the android logo on d scree with the text message, odin can see the deivce on com5, but just stays at the line saying connecting to deivce. The phone it self is working, but i am not happy with the upgrade, so wanted to roll back. Please help me solve this problem. The rom i upgraded to was I9003JPKP5.
The mistake i did, i think, wast not to upgrade to kpe first and then come up to kp5, i directly did a kp5, misssed that part.
Please Please help.
mdpasha78 said:
hi,
i do c the android logo on d scree with the text message, odin can see the deivce on com5, but just stays at the line saying connecting to deivce. The phone it self is working, but i am not happy with the upgrade, so wanted to roll back. Please help me solve this problem. The rom i upgraded to was I9003JPKP5.
The mistake i did, i think, wast not to upgrade to kpe first and then come up to kp5, i directly did a kp5, misssed that part.
Please Please help.
Click to expand...
Click to collapse
you need to flahs xxkpe twice to avoid camera problem too.
Weird!!!!!!!!
Tell me the method using which you flashed the firmware. Give me all the steps!
I will tell you where you went wrong!
U need to switch the phone off to get to download mode.
Also XXKPH is a final GB release. Install that by first flashing XXKPE twice, then using the single XXKPH file as the PDA in Odin with nothing else.
Sent from my GT-I9003 using XDA App
hi friends,
thanks for your help. I was able to get to the download menu, i removed the battery and inserted it back and used the assigned keys to get to it, the reflashed the same set of files i had, now i am getting the download menu and the camera is working fine.
Will download KPE and follow the instructions given on XDA step by step for the upgrade.
Thanks a lot for you help. I really appritiate it.
Hi. I tried the method up there to go to download mode but so far I can't get there. It's so weird. I can go to the recovery mode but not the download mode. Are there any more methods to go to download mode? I press all three buttons for roughly 1 min but no vibration at all. after I let go the power button, it go to the startup and stuck there.
Thanks in advance for any opinion.
imaginarygur said:
Hi. I tried the method up there to go to download mode but so far I can't get there. It's so weird. I can go to the recovery mode but not the download mode. Are there any more methods to go to download mode? I press all three buttons for roughly 1 min but no vibration at all. after I let go the power button, it go to the startup and stuck there.
Thanks in advance for any opinion.
Click to expand...
Click to collapse
You must press the volume down+home+power button and let go at the right time
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
my samsung Galaxy FIT GT-S5670 got locked by pattern lock and i am not able to unlock it
and also the Home+ power button press menu is not coming to reset all .
please send me solution
Remove battery...re-insert it. Now press & hold Home & Power buttons together until phone switches on. Now u should enter recovery & format ur phone thereby
Hope this helps...!!
phone pattern lock problem
noble able to unlock Pattrern lock
It not workin please give me another option
recovery mode is also not working
when i press vol UP + power + menu button
its shows Ramdump Mode (ARM9 mode)
and also
Power+ menu note working
In my mobile USB debuggung is on
and also downloading mode is working when i press Vol Down +power + menu button together
PLease tell me solution
:highfive::highfive::laugh::laugh:
Thats gr8. If download mode works then u don't need to worry at all. Flash stock firmware via Odin & everything will b alright then.
Btw download mode is accessed by pressing & holding Volume down & Home & Power buttons together. You'll see "downloading" written under a yellow triangle:sly:.
Note: First ensure that u know what u r doing, then implement those steps. Using Odin unknowingly may produce some undesirable issues
hey stop, before doing anything check this link maybe you won't need to format your fit
http://www.frendz4m.com/forum/showt...ogle-Android-Pattern-LockScreen-Unlocker-.htm
Frank782 said:
hey stop, before doing anything check this link maybe you won't need to format your fit
Click to expand...
Click to collapse
I think it's a malware. Thats my opinian. Just Be careful.
Using Samsung Galaxy Fit
Running on Vania Rom 1.4
Sent from Indonesia
mfmuam said:
I think it's a malware. Thats my opinian. Just Be careful.
Using Samsung Galaxy Fit
Running on Vania Rom 1.4
Sent from Indonesia
Click to expand...
Click to collapse
I don't know that but I can tell you that I used that thing and it worked for me although after a reboot my phone was in the same condition but it was good for me since, I was able to take backup of my data.