Any body can help me how to get in BOOT MODE,i flash in wrong file now my unit no power,no boot how can i recover my phone
need advice urgent please
Stole this guide from here
1. Download all the files for odin here
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Load in the files into Odin that you have downloaded from above Just load in the files corresponding to the text field.
DO NOT CHECK REPARTITION.
9. Plug in your phone with the DL mode
10. Click start and wait for the magic
Related
I have Galaxy ace
I wanted to switch to 2.3.3, so I downloaded the software ROM manager did flash. He asked me to pick and chose just Pelephone Pelephone, he wrote that he succeeded. After Flash went to Backup (backup), I clicked, boom turned off. I gave him a minute or two That's it.
BY THE WAY, you know what this Emergency MOD? Computer can recognize it is about this situation.
help?plzzzzzzzzzzzzzz
it seems that you tried to show some intelligence in flashing rom
who said you to flash with rom manager when the site clearly stated that you have to use odin to flash rom.
the only thing now you can try is putting you phone in download mode and flash with odin and follow the flash guide directions below-
1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 4.38 on your PC
5) Select from extracted archive: OPS, Boot, Phone, PDA, CSC (leave EFS and One Package empty)
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar.md5
6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
8) If ODIN detected and recognised your phone should light up the first square to the left side
9) Press "Start" button and wait, the process should take 5-10 minutes
10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
12) Disconnect your phone
13) Turn off your phone
14) Insert your SIM Card and SD Card again
15) Turn on your phone
16) Now you have the newest firmware!
Hey dude
tnx for hlp,but he dont get into download mode and recovery mod.
he Not Responding for nothing.
when i try to turn it on,recovery mod.download mod, he wont boot.
sorry to say but i think you bricked or semi-bricked your ace...
i got more then less same problem..
just have my galaxy ace GT-S5830
needed restart.. try turn on again... only thing he did was buzzing and samsung came in the screen lightning on and off... but wasnt able to continue to normal android menu...
i try a restart now
in small yellow i see downloading.. hope it works..
else i bring it back to the shop.. phone is just 1!! day old
guddu2011 said:
sorry to say but i think you bricked or semi-bricked your ace...
Click to expand...
Click to collapse
How to solve bricked SGA?
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
alstonleo said:
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
Click to expand...
Click to collapse
Facing the same problem, the critical point the mobile does not respond to power up (either turning on, recovery mode or even download mode), any help please??? I got this mobile less than month now
Samsung Galaxy Ace Wont Boot!!
when i press the power button of my galaxy ace, baring in mind the battery has charge, the empty battery indicator comes up and then the phones turns off straight away. i have tried flashing different versions of android hoping it was a buggy firmware but no luck. this also happens when plugging the phone into an ac power supply. any help?????????
If you cannot access the download mode or the recovery mode then your phone is bricked. All what you can do is go to the service center and pull up a nice story about how it happened while you were sleeping. If you are lucky enough, you will get a replacement.
Btw WRONG THREAD. THERE IS A SEPARATE ONE FOR THE ACE.
TeamCooper Developer
TheMyth Developer
www.teamcooper.net
Galaxy ACE only displaying the word "Android"
Same problem here, only I use Ubuntu 12 and was wondering if there is a way of re-flashing using download mode and Ubunu?
my phone get a blue screen cant get past it. the factory reset do not fix it anyway to rebuild the rom in my phone? the photo below it the blue screen i get.
If you can get it to download mode this will work
hroark13 said:
I created and ED13 rooted Odin recovery for those who have a phone that wont boot
THIS WILL WIPE ALL YOUR DATA
1. Download and unzip the file.
2. Install the Samsung USB drivers
3. Put phone in Download Mode by holding Vol down, Camera Button, and Power button until the Yellow Downloading message appears
4. Plug phone into USB port
4. Open Odin, you should see a yellow box with a com number
5 Select SPHM820.ops file and the ED13_SPHM820_ROOTED_PDA.tar in the appropriate Boxes
6 Click Start
If you have a really screwed up phone you can flash all three tar files and everyting will back to ED13
DOWNLOAD
megaupload.com/?d=5NPEJT9I
Click to expand...
Click to collapse
double post sorry
My phone is rooted with stock rom. The only changes are listed below
Froze bloat that was safe
changed bootanimation to stock samsung
replaced some apps with inverted versions of themselves (ex. google +, stock messaging)
Here goes:
I was using navigation and I noticed that my phone was off after I had finished. Nothing worked at all, I could not boot into recovery or download. I connected the phone to a charger and red led flashes and an empty battery appears. The battery was full. I could reboot the phone while on the charger, but it would shut off as soon as it got to the homescreen. While off, If I pressed the home button, the green battery would appear as if it were charging. From here I could boot into recovery and download mode. The phone will only boot into these modes while connected to the charger. Here is where it went bad. I attempted to restore a backup while the phone was on the car charger and my car charger got pulled out in the middle of a restore. No charger meant that the phone shut off mid restore. Now, when I plug in the phone, the red led appears and the empty battery with a circle inside appears and then goes away. This repeats itself over and over and the phone buzzes when the empty battery reappears. I can still boot into download mode but not recovery. If I try to flash the stock samsung rom via odin, it says that it passes, however upon automatic reboot the samsung appears and nothing else. After the samsung appears the phone just continues to buzz every 5 seconds or so as if it is trying to do something. Could it be a bootloop? I have done a ton of searching here and now I am resorting to help! Your time is appreciated and beers on me if you can help me get my phone back to normal.
try:
Section 6: Using Odin to flash back to Stock from any rom/ recover from a soft brick
*Move everything you dont want to lose from internal sdcard to external sdcard as this will reformat your internal sdcard!!
Step 1: Download and install these files to pc:
Odin- http://samsung-updates.com/Odin307.zip
Samsung Driver- http://tinyw.in/Fdoz
Step 2: Download one of these Factory STOCK Bloated 4.0.4 roms and the stock kernel to your pc:
*You will need to unzip these files with a .zip program such as 7zip to extract the .tar files!
VRALG1- http://goo.im/devs/invisiblek/i535/C...w_ship.tar.zip(Yes this works with the stock VRALF2 kernel!)
VRALF2- http://goo.im/devs/invisiblek/i535/H...w_ship.tar.md5
Rooted Stock VRALF2 by MrRobinson(aka root66)- Here is the Torrent link
Stock VRALF2 Kernel- http://samsung-updates.com/kernel/Sa...LF2_Kernel.zip
Step 3: Power device off, then hold the volume down/home/power keys until you see a yellow triangle, then press the volume up key to access "download mode"
Step 4: Open Odin and connect the oem usb cable to pc & device, you should see a "comport #" in upper left hand corner of odin
Step 5: Uncheck auto reboot
Step 6: Click on the PDA function of odin and select the Stock Kernel you downloaded in step 2. Should take roughly 1 min, then odin will say pass/reset
Step 7: Click on the PDA function of odin and select the Stock Rom you downloaded in step 2. Should take less than 8 minutes, then odin will say pass/reset
Step 7: Disconnect usb cable, then pull and reinsert the battery
Step 8: Press and hold the volume up/home/power keys until you see a green android, you should boot into stock recovery
Step 9: Wipe data/factory reset
Step 10: Reboot! (You should now be booted into factory stock, locked, and bloated ICS 4.0.4)
*If your internal memory(EMMC) has corrupted data partitions and my method above wont recovery your device, try this: http://forum.xda-developers.com/show...4#post30477064
And thank DroidStyle for providing this ^^
I will try your method. I believe I have completed these steps but I will try again. The link you supplied is not found.
Should the stock rom file be a .tar or .tar.md5? The kernel was a .tar and I have an official samsung vralf2 that is a .tar.md5
I tried your method and the empty battery is gone , but it doesnt get past the samsung on booting into recovery and continues to buzz every few seconds with a blank screen.
For some reason the phone will not recognize the battery. I tried a new one at verizon and the same thing. I can now boot into both recovery and download mode when connected to the charger , but the phone shuts off as soon as it boots and shows an empty battery with a circle in the middle. Sometimes it does not make it through the verizon boot animation and sometimes it makes it all the way to the homescreen and I can make a few selections before it turns off. After flashing the stock kernel and rom in odin I believe i am completely stock, however I do not want to chance sending the phone into Verizon. I believe that I saw a thread before this happened to me talking about having to calibrate the battery in some way and it had an item to flash in order to fix the problem. I can not find it now. Any ideas? Now that I can access recovery is there anything else that can be done? Why won't the phone recognize that it has a battery? As soon as I pull it off the charger it shuts off. When it is on the charger it appears to be charging and the green in the battery appears to be at about 80% but the level does not move up or down at all. Thank you for your help ahead of time.
I replied to your other thread seems to have been deleted.----- Boot into download mode and let it sit on the charger for 30 minutes, remove from charger pull and reinsert battery. Boot your phone regularly. Charge/profit
Sent from my VzW Galaxy s3 using xda premium
Ok i am in the process right now. Thank you, and I hope this works. If it does not and If i try to download bootchains , kernel, modem , and stock rom once again, is there any particular order that this should be done in? Also, is there any way that I can get cwm recovery on my phone? I can not get my computer to recognize the phone in download mode or recovery mode to push it with adb. If I could get cwm on the phone would wiping battery stats and fixing permissions do anything?
Just a week ago I had this problem. The reason for my Infuse to go into BootLoop was because i was going to install a new font and it required a reboot. So If install fonts at a risk of BootLooping. And now here I am to show (those you can go into recovery or download mode) how to fix the BootLoop. Well not really me but I will give you the link so that you can download everything and fix that annoying BootLoop. :laugh:
The Video I Used: http://alturl.com/g96nk
The Files I Downloaded: http://alturl.com/9oart
After Unzipping Everything. Plug in your phone and set it into download mode. [ Take Out the Battery, Press +/- (volume buttons), Connect Phone To Computer, Still Holding the Volume Buttons, Insert Battery into Phone. ] I will have a picture for those who don't know what download mode looks like
-Then Open Up Odin
- Put PDA_UCKD5.tar.md5 In PDA slot
- Put PHONE_UCKD5.tar.md5 in Phone slot
- Put infuse.pit in Pit Slot
- Press Start And Let Odin to its magic
After the session is complete the phone will reboot. You can reinstall you root/ROM aftwerwards.
Hope This Helps.
I know there have been other threads like this but just wanted to affirm that it works for those who can go into download mode/ recovery mode
Hey guys, my friend just gave me his phone model Gt-i5800 to fix, and it stuck in boot (startup). First, I though that just a simple flash will be enough, but it didn't work, I tried to flash it with Odin, but doesn't download all files it stuck there too, can't access recovery as well.
you will be able to tell from this picture.
any ideas?
and thanks.
Plug the device in and charge to 100% on wall outlet.
Download and install Kies 2.6 onto you Windows PC. (While the device charges.)
Open Kies and update if necessary.
When Charged, Plug the device into the PC using OEM cord. Press the "Home" button and make sure battery reads 100%.
Place device into ODIN Download mode. (Press and "HOLD" the Volume Down, and Home buttons. Then "Press and Release" the Power button for 1 second. KEEP holding the two buttons until the warning message or Android appear.)
Inside the Kies Software, select "Tools", then "Update and Initialize Device" follow instructions on the screen.
Note: Once Kies is showing that it is downloading, it would be good to browse to your TEMP folder (Located in Windows 7 @ C:\Users\*Your User Name on Computer*\Local\Temp) and COPY the "Tmp.***.zip" file that will appear to you "Desktop" while the device is reprogrammed. This is the complete factory image of your device, and may be needed later to ODIN Flash if Kies fails!