Hi guys new to the forum and this world ... I wanted to present my problem for about a month I own a samsung mini galaxy the only problem is driving me crazy is that the bluetooth and I can not connect my bt headset (Nokia BH-102) ... I'll explain:
Just turn on the search bt do find it, I can make the association work for a while and then disconnects without reconnect because it is as if the bt went out when being turned on I tried everything I also updated the JPF but still nothing to me this joke ... Help me !!!!!
NB I tried with headset samsung and other mobile phone without results ...
A greetings to all
try a different headset to test if it the phone or not, like a plantronics or motorola (borrow a friend's) if it connects then it is a compatavility issue with your headset
the problem is that the Bluetooth works only for a short time and then stops working and as if by itself ... short turns off by itself
Related
I have bought a Plantronics M3000 bluetooth headset for my QTEK 2020. I have no problems pairing, calling and answering. However the headset just shuts off after a few minutes of conversation. It doesn't just cut the conversation but shuts off. I can make multiple short calls but nothing longer than 3/4 minutes. It works, however, without problems on my wife's Ericsson T68. Anyone can help ? Thanks.
Marek
Hello,
I have the MDA2 (same as QTek2020) and a Plantronics M3000 and It's been working just fine.
The problem you describe it's very weird since you mentioned that the headset works fine with your wife's mobile, and that makes me think that your QTek has some sort of problem with the Bluetooth stack or hardware.
It may be well worth to try (if possible) another headset just to make sure that is not the M3000 fault.
Do you see any type of error or message on the screen at the time of disconnection?
Does it always cut the conversation at the exact same moment?
Does the problem match the time the QTek takes to power save?
Any other clues?
Thanks.
I did not have the occasion to test another BT headset on the Qtek. When it shuts down there isn't any message displayed.
I have no problems with the BT stack (with the Pocket Bluetooth Tools patch) when using it with a BT GPS (Emtac) receiver, it works for hours.
However, your suggestion that it might happen when the Qtek goes in energy saving mode is interesting. I will check that tomorrow.
I'll post the result.
Hi
I seem to have a similar poblem after installing pocket bluetooth tools!.
I use a Jabra BT 250..and I noticed that the headset just mutes during the call..
I am generally used to switching off the display of the XDA after placing the call to power save ...
So I discovered that the headset would mute whenever i switch off the xda after making the call (which it never did prior to installing PBT)!
any thoughts on that?
maybe it has to do with the auto switch off plugin?
Actually I just experienced that too...
If I place (or answer a call) the next time I try to use the phone via the BT headset I notice the BT headset was turned off... Yeah, it could be related to the Powersave feature on the today plugin that PBT installs as a plugin... :roll:
Need to investigate...
Best regards,
Rayan
Both my bt headsets have stopped working since installing pocket bluetooth tools latest version, I have reverted back to version 1005 and everything is fine. I have a sony-ericsson EBH-65 and a skypower clip on headset.
my platronics does the same also its annoying you cant even transfer the call back to the device you have to hand up turn off bt and then turn it abck on and headset mode back on it also does the same on my pc
when im on msn using it as a headset it just d/c and i have to turn it off and turn it back on again
dont see what the problem is
btw the range on the xda2 and platronics is amazing i had it on my bedrooms desk and i went outside it passed through the living room wall and the patio window and i was stood 5m down my garden im sure it would of been over 10m and it was still working if i kept still when i moved it went crackly but ah well lol
just hope someone sorts the prob out
Hi,
I was having the same problem with the M3000. I just had confirmation from Plantronics that this problem is a bug in the product that occurs with the XDA II. I am currently in the process of returning the product.
Regards...Mike
Same problem M3000 doesn't work. Give up now before too much frustration makes you feel ill.
Try the Hello 2 headset. Work with my Aussie XDA2 and is very small and lightweight. Even had a neck chain to carry it around like a USB drive.
My PDA2K had the same problems as everyone else did the bluetooth error kept turning up and asking for a soft rest.
Bluetooth activesync and TomTom worked fine the the headset was crap it did sort of work but not as it should.
I did the upgrade rom from the Imate site, But now the Activesync and TomTom work as befor, but the headset (jabra 250 and 250v) pair ok but fail at the end of the set up proces.
Dose anyone know a way to fix this
Thanks
John
Am i the only one with this problem? or after rom upgrade dose everyones PDA2k work fine with no Bluetooth problems, and the headset working properley
Thanks John
aside from the annoying constant connection, I've got it paired to a sony HB-35 and working with no major problems.
As for annoying, what happens is that the phone establishes a bluetooth connection to my HB-35 but never releases it unless I disconnect or power the HB-35 off. Other than that, when it is connected, it seems to work ok... have not used it all that much since i use the PDA2k to play my mp3's.. so I've been using the corded headset.. Tend to use the bluetooth only when I need it for gps navigation .
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Sirius75it said:
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Click to expand...
Click to collapse
No problem with my Samsung WEP200 BT Headset. In my case it work much better than with my old P3600 where people always complain about bad sound when I was in BT.
To be sure that your problem isn't linked to the Polaris, you should test with another headset.
Good luck !
academic said:
No problem with my Samsung WEP200 BT Headset. In my case it work much better than with my old P3600 where people always complain about bad sound when I was in BT.
To be sure that your problem isn't linked to the Polaris, you should test with another headset.
Good luck !
Click to expand...
Click to collapse
Thanks for your answer!
I try with another headset...
Sirius75it said:
Thanks for your answer!
I try with another headset...
Click to expand...
Click to collapse
I had similar problems with another HTC phone, same Motorola H700. Seems that the H700 might be the problem. I also use a Jabra without problems.
Sony Ericsson bluetooth headsets work also just fine.
butzchan said:
I had similar problems with another HTC phone, same Motorola H700. Seems that the H700 might be the problem. I also use a Jabra without problems.
Click to expand...
Click to collapse
I have the same problem with my Motorola H700!
Going to try an old Jabra headset this evening.
Sirius75it said:
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Click to expand...
Click to collapse
I have the same problem and sometimes I re-apply pairing between the headset and my polaris
same problem with Motorola H700. and olso motorola HS 810
They seem not to be compatible
I have reconnect my old carkit bluetooth Parrot CK3000 Evolution and with my HTC Touch Cruise work very fine!
With my old P3600, the parrot ck3000 evolution don't work fine but have problem with audio and connection, therefore i had unplugged and i had buy the headset Motorlola H700 thed worked well with P3600...
Same problem with Jabra headset
I have also exactly the same problem with a Jabra headset.
I found that the problem only occur when bluetooth is first activated on HTC and then activated on the headset. if I do it in the other way it works fine.
that's also the reason why it works after a soft rest of the HCT or disconnection reconnection of bluetooth on HTC.
Does it only mean that the headset is not compatible or is this a problem on the HTC.
Vincent
I don't know the bluetooth 2.0 + edr is compatible with motorola headset
perhaps a bluetooth incompatibility
i read on it http://direct.motorola.com/ENS/HKernel/H700_Headset_detail.asp
this : # Bluetooth Class 2 for wireless connection of to 10 meters
(30 feet)
# Compatible with Bluetooth 1.2- or 1.1-enabled mobile
phones, PDAs, PCs, and more that support headset and
hands-free profiles
I had the same problem with the H700. It connected fine the first day, and I used it for about 15 minutes. The next day, it wouldn't stay connected at all. Tried to re-pair, etc..no luck. My Jabra BT-125 works great, as does my LG HBM-730.
HTC patch for bluetooth
I saw on HTC (in the e-club section) that there is a patch for Touch (is it touch only or touch cruis also? I don't know) regarding "bluetooth connection problem".
Unfortunately I cannot download it.
If someone can do it, I'm interested.
Vincent
First of all sorry for my bad english!!
What about the patch for HTC TyTN II? this one seems to be like htc cruise, both of them have the same specifications, may be this patch work on HTC touch cruise
Where I can found the patch ?? I want to try it on my cruise. If don't work I will restore all with a backup file...
you can found it on HTC web in the e-club section. If the patch works properly write it in the forum please!
mesmo said:
First of all sorry for my bad english!!
What about the patch for HTC TyTN II? this one seems to be like htc cruise, both of them have the same specifications, may be this patch work on HTC touch cruise
Click to expand...
Click to collapse
Same specifications but different motherboard. Don't try it.
Ok......... thank you, I'll wait for another solution
After more and more test, I have found that the problem of the motorola Headset HS850 (and I think H700 etc. etc.) is the boom switch.
If you pair the headset to the Cruise and use it, it works fine (not stop after 3-4 seconds). Works great also bluetooth audio program:
http://www.freewarepocketpc.net/ppc-download-bluetooth-audio-v1-0.html
for redirect all audio to the headset.
But... if you switch off the headset with boom close, next time it will not work more than 3 seconds
So, the problem on this motorola is the automatic connection when open the boom.
Sony Ericsson HCB-700
Hi. I seem to be having similar problems. I had 3 phones linked to my HCB 700, and all worked fine. Very occasionally, I would have found that one wouldn't pair up when the ignition was switched on, but with my old Orbit 1, that may have happened once a week. I got a new Orbit 2, and was able to pair it easily. Now, it never fails to start paired, but frequently drops the BT connection. Usually a simple button press links it again, but it will rarely stay linked for more than 30 minutes, and could drop the connection 3 or 4 times in 10minutes. Then it may work for 30 minutes. I tried a reset to default settings, and re -paired the two again, but it doesn't seem to have made any difference. This can happen whether I have used the phone or the handsfree or not.. I'm thinking of getting a Parrot kit now instead - any ideas? Thanks in advance..
Hi all,
I wasn't planning updating to the custom ROM but I'm having connection issues with bluetooth at my car (I got to turn off and then turn on bluetooth on the phone to get it connected) and I was wondering if new ROM going to solve this problem or it's more like hardware?
Any idea?
Thanks
Alex
what kind of radio? even with a custom rom (evils Z) on my pioneer f90bt sometimes i have to turn the blue tooth on and off for it to connect. sometimes it connects first try.
BT is a finicky protocol. Do you have BT issues with any other devices and your phone, or just the car stereo?
Just this stupid stereo. It works fine with other cars. But other phones works fine with my stereo
May be the stereo not sending out a connection request when you turn your car on have u tried re-pairing? I've had similar with a headset.
I tried re-pairing with no result. I can initiate car bt connection manually so I'm pretty sure it's the phone issue.
Hello, so i bougth this great phone, but bluetooth pairing(+autoconnect) is not working at all.
So to the proplem. My opo IS paired with my alpine car stereo, but everytime i go to my car opo asks IF i want to pair it...and obviously it should just connect automatically since i have paired it earlier but no.
Is this some known issue with opo or my device just making me headtache?
IF anyone have had same proplems i would love to hear how you managed to fix it.
PS. All my old phones automatically connected to car stereo after pairing once, so its most definatly opo issue and not the alpine stereo.
Okey, i got this solved by doing 2 things, but because im stupid and didnt test it between these actions i cqnt say which one did the job or was both needed.
1. I cleared "paired devices memory" from my alpine stereo.
2. I cleared paired device list from my handset(opo)
Hope this will help someone else in future who got proplems with alpine receiver and opo.
Problem solved! bluetooth pairing and buffering issues
Hey problem solved
I had bluetooth pairing and buffering problems and now everything works perfectly. what I did was flash OPO_OxygenOS_1_0-modem-flashable.zip (you can find it somewhere in google docs..don't remember the link)
anyway after doing that everything works perfectly.
I am running cyanogen 12.1 nightly build from 20150601
then I flashed the modem.
makkeonmies said:
Hello, so i bougth this great phone, but bluetooth pairing(+autoconnect) is not working at all.
So to the proplem. My opo IS paired with my alpine car stereo, but everytime i go to my car opo asks IF i want to pair it...and obviously it should just connect automatically since i have paired it earlier but no.
Is this some known issue with opo or my device just making me headtache?
IF anyone have had same proplems i would love to hear how you managed to fix it.
PS. All my old phones automatically connected to car stereo after pairing once, so its most definatly opo issue and not the alpine stereo.
Click to expand...
Click to collapse
oohh
AlonAsh said:
Hey problem solved
I had bluetooth pairing and buffering problems and now everything works perfectly. what I did was flash OPO_OxygenOS_1_0-modem-flashable.zip (you can find it somewhere in google docs..don't remember the link)
anyway after doing that everything works perfectly.
I am running cyanogen 12.1 nightly build from 20150601
then I flashed the modem.
Click to expand...
Click to collapse
Technical solution...too much ?
Hello All,
I too was facing issue with the Bluetooth connectivity. My headphone "Jabra Halo Smart" worked perfectly fine with other android devices but my OnePlus One. Issue i faced was that my at times my headphone would get detected but the headphone controls wont work. It was really irritating as i could not use the functionality of my headphones.
What i did was went into the Bluetooth options. Clicked on the setting icon beside my headphone and unchecked and rechecked the options.
Another action i performed was un-pairing the Bluetooth headphones from my device and resetting my headphones paired setting.
Third option was resetting the Jabra app that i installed on my mobile.
Fourth action is restarting your OnePlus device.
The above actions i performed in different orders. So one of them should surely help.
Suggestion provided by OnePlus Call Center: (which i did not need to try )
--> switch off the device
--> Press power+vol down button simultaneously
--> Select English language
--> wipe cache partition
--> wipe cache
--> reboot device
Advice while using Bluetooth headphones or speakers (especially Bluetooth devices having the functionality to connect multiple devices)...switch off the Bluetooth device and then switch off the Bluetooth of the host device (mobile, laptop, etc) and then connect the Bluetooth device to the other host device
Do not keep two host devices Bluetooth on...at times it causes to store the connection setting in the cache causing the Bluetooth device to act strangely. :cyclops: :cyclops: :cyclops: