[Q] Slide to unlock gone? - Touch Cruise Android Development

Hey everybody!
I'm a proud Android on Polaris user now that my phone stopped "rejecting" it
Now I have a little problem:
I configured an unlock pattern, but after a few locks I figured out it was annoying. So I put unlock back to "none". Now, I don't know why, the "slide to unlock" isn't there any more! Whenever I get out from sleep, it just powers on right at the screen I was before!
Anyone experiencing this same issue?
EDIT: I installed lots of programs that night and data got corrupted, so when I did a fresh install it started working again. Not a good answer to this question, tho. But I read somewhere about this same issue on some Samsung devices, too.

Related

Data problems related to S2U2??

This may be nonsense but I'm beginning to get a suspicion about S2U2 potentially being the cause of data connectivity issues for me.
I'm hoping I'm wrong because it's such a great program and I've used it on my last couple of phones.
Basically when I had my Touch HD, I had to reboot it pretty much daily if I wanted my data connection to work, otherwise I would get connectivity problems, but they would always be solved by a reboot.
I never figured out why this was, even though it was mega annoying. In the end I installed a cab to do a scheduled reset each night and it helped quite a bit.
Since I got my HD2 it has behaved perfectly as far as data is concerned and has not had a single connection fail with use every day for emails & browsing, UNTIL I installed S2U2 yesterday late afternoon, then last night it failed to connect. Yes you've guessed it, a reboot solved it.
I know that's hardly conclusive and I'm hoping it's not the case as I love using this program as an unlock screen, but I was wondering if anyone else has had any problems like this?
I was wondering if it was somehow also linked to my carrier too. The reason for this is that my friend also had a Touch HD and used S2U2 and never had this problem but he uses a different phone company. He now also has the HD2, and has installed S2U2 again and is fine, but mine is acting up, so it seems weird that it happens to both my phones but neither of his....
I know I could remove it to see if the problem goes away but programs sometimes leave bits behind when you uninstall.
Cheers
Jim
I get problems either daily or bi-daily where I have to reboot my HD2 to get my data connection to work again, (its connected but doesn't work). Every time its solved by a reboot.
I dont have S2U2 installed. If you find the reason behind the issue let me know as I am about to start doing a search into it.
Hmmm, maybe it's just coincidence then. But why would it have worked perfectly up to that point though, that's the thing that makes me wonder.
Mine also appears to be fine in terms of still displaying the GPRS signal/sign, but trying to retrieve emails or open the browser etc gives an error. It's maddening, whatever causes it!
Same thing again this morning when I told the phone to get my emails - connection failed. Worked fine after a reboot.
I'll see what happens tomorrow. If it does it again then I'm going to uninstall S2U2 and see what happens from then onwards. If it doesn't fix it then I guess it'll be a hard reset on the cards....
Back to original HD2 screen lock from 2SUS
Dear all,
Can tell how to change back to original lock after installed disable the screen lock? I don't like 2SUS needed so long to slide...
Just uninstall it, then press your windows button and hit the lock softkey.
I've removed it myself tonight even though I'm a long term S2U2 fan.
Since installing it a few days ago I've had even worse problems with ghost unlocks than before.
Previously the only issue was accidentally cutting calls off, but with S2U2 in use (standard lock disabled) I had a text from a friend on Friday asking if I was drunk. Somehow, whilst locked in my pocket it unlocked and sent a gibberish sms!
Then today, it also somehow unlocked in my pocket and dialled my mum!
I'm just glad I wasn't playing Call of Duty when it happened or she would have just heard "Sh1t!!! You cheating f***!!! WTF??? You..... FFS!!!!" etc
But seriously - I love S2U2 from previous winmo phones but it's made my HD2 worse so I've uninstalled it tonight sadly.
Isn't there a working fix for these bastard hard buttons yet? I LOVE this phone but the bloody hard keys are ruining it.
Hi Cret,
Thank you so much for your response. I did remove 2SUS and selected the Screen Lock from pressing the Power buttom but it doesn't auto lock each time...
Can you tell what to do such change Registry or I need to restore the original setting?
Thank you, dude.
jakoo said:
Hi Cret,
Thank you so much for your response. I did remove 2SUS and selected the Screen Lock from pressing the Power buttom but it doesn't auto lock each time...
Can you tell what to do such change Registry or I need to restore the original setting?
Thank you, dude.
Click to expand...
Click to collapse
here we go use this cab or go to:
http://forum.xda-developers.com/showthread.php?t=583638 hack nbr 27
gdayhtc said:
here we go use this cab or go to:
http://forum.xda-developers.com/showthread.php?t=583638 hack nbr 27
Click to expand...
Click to collapse
he wanted it back... not disable...
Go to HKCU\ControlPanel\Keybd and change DeviceLockWhenSuspend to 1
This should re-enable the lock...
Thank you very much!
I will try to see it works on my HD2.
Mine was the same ie the lock would not return.
I already had BSB tweaks installed which had a toggle for the lock though, so I just activated that.
Cret said:
Same thing again this morning when I told the phone to get my emails - connection failed. Worked fine after a reboot.
I'll see what happens tomorrow. If it does it again then I'm going to uninstall S2U2 and see what happens from then onwards. If it doesn't fix it then I guess it'll be a hard reset on the cards....
Click to expand...
Click to collapse
Hi, did uninstalling S2U2 help on the connection failures?
Well, I only removed it last night but so far yes. I have not had to reboot the phone this morning and the data is working flawlessly.
Also - and this is a biggie! The battery life on the phone is MILES better without S2U2.
Normally the phone would be down to about 70% by lunchtime without even doing anything and it's still on 96% now - that's a massive improvement!
However, one thing has occurred to me as a possible cause of these issues - I've realised I was using a very old version of the program - v 1.5.
I think I'll try the latest one - 2.22 and have a look through the changelogs to see if there's anything mentioned in there along these lines.
Well, I only removed it last night but so far yes. I have not had to reboot the phone this morning and the data is working flawlessly.
Also - and this is a biggie! The battery life on the phone is MILES better without S2U2.
Normally the phone would be down to about 70% by lunchtime without even doing anything and it's still on 96% now - that's a massive improvement!
However, one thing has occurred to me as a possible cause of these issues - I've realised I was using a very old version of the program - v 1.5d.
I think I'll try the latest one - 2.22 and have a look through the changelogs to see if there's anything mentioned in there along these lines.
Here's two fixes right away in the next version relating to battery use:
- fixed the v1.50 issue of occasionally high CPU usage during idle.
- save more power than the old version when the device is sleeping.
v1.6
- removed option "Power Save" as the power leak problem is found & fixed.
I can't really be arsed reading through the rest of it but it's obvious there have been power issues addressed by subsequent versions so I'll try the latest and see how it goes.

Major S2U2 problems.

Hey everyone, I have the ATT Fuze and installed the S2U2 app a while ago. Since then it has gotten progressively worse. I attempted to troubleshoot and change somethings around according to their website but with no luck.
A few of the problems I experience:
-Cannot answer calls. My slide to answer is set to always.
-Locks up within one second of unlocking.
-And probably the most annoying, it takes forever for the screen to show up.
What would you guys recommend as a solid phone lock function for the ATT Fuze?

[Q] screen unresponsiveness? and calendar

hey guys
i just got my nexus s yesterday and i've been experiencing some touch screen responsiveness issues.
it only happens during the homescreen. whenever i'm swiping through homescreens, it would not respond to the touch at all, except sometimes when pressed slowly with lots of force. everything else (unlocking device, app drawer, texting, everything) responded well EXCEPT swiping through homescreens...
a simple reboot fixed this problem and i havn't seen it happen yet so far, but has anyone else had something like this happen to them?
-----------------------------
also, when i'm trying to put a new event into the calendar, i get the message:
"You have no calendar"
any way to fix this issue?
Thanks,
----------------------------
edit: sorry for the long post, but is there any way to get back the old market? the new one is quite laggy on my phone.. (it automatically updated itself the second time i opened market)

[Q] 5.1.1 Lock Screen Not Appearing or Locking Consistently

Prior to 5.1.1, every time the phone was idle for a short period of time the lock screen would appear and, when I was home, SmartLock left it unlocked, most of the time, but it always appeared. Since upgrading to 5.1.1, the lock screen rarely appears anymore and, when I’m away from home, since the lock screen rarely appears anymore, my phone is often unlocked and unlocked without a lock screen and having my phone unlocked is a big security issue . I don’t know if this is related to 5.1.1 or, perhaps, a recent Google Play Services update (since Google Play Services is responsible for so many things nowadays, I assume it’s suspect).
Anyone else have this issue/know of a possible fix? Thanks.
Bump. Is no one else having this issue? The lock screen for everyone works perfectly on 5.1.1?
Yes, since 2 weeks ago. Any solution?
None that I know of—I still have the problem.
Just chiming in to say this issue appears to be largely resolved since Android 6.0.
BinkXDA said:
Just chiming in to say this issue appears to be largely resolved since Android 6.0.
Click to expand...
Click to collapse
Resolved? Apparently not that largely. Such issue started 24 hours ago on my 6.0.1 device. Unable to lock screen despite pattern (or whatever chosen) is correctly set. No "smart lock" option is used, BTW; Though lock screen often appears but only when shutting down and restart the phone, not by rebooting it. Looked exhaustively for a common fix, but everyone suggests the same old, clear caches, credentials and device administrator thing.That is NOT working here. Safe mode says nothing's wrong with apps causing the flaw either. Yes, I'm rooted, on Xposed and all that stuff, as always. Probably it is related somehow; however, issue has never ever showed on any other device I had, and I had two previous on 6.0.1 as well. If anyone has a different hint on the subject, well it'll be well appreciated.
Sent from my Moto G4 Plus using XDA Labs

Screen time out not working

has anyone run across this issue when you set a specific time out, the screen dims after the specified time but does not lock, it stays on?
my phone was working just fine, stock not rooted, took the latest update and after that i've been having nothing but weird issues, the other day the notification area at the top was not working, i had to basically check every app, messages etc manually to see updates, had to factory reset the damn thing, now this screen issue, the phones is only 1 month old.
any input?
thanks
I'm having very weird issues with screen lock. I'm be on the phone and the device will randomly lock and not let me unlock it without restarting the phone.
The new update is when it all started. I don't want to do a factory reset, but it's looking like I might have to?

Categories

Resources