OC Qustion. - Thunderbolt General

How safe is the thunderbolt for Overclocking?
I just installed and tried 2 different roms and there both clocked at 1.2-1.3.
Is that safe? Will it shorten the life of my phone?
Thank You

the processor is rated @ 1.4Ghz..mine runs up to 1.8 so far, tried ziggy's kernel at 2.03 and it froze immediately...I run at 1497/368 and love it.
http://www.htc.com/us/support/thunderbolt-verizon/tech-specs/
Chipset: Qualcomm® MSM8655, 1GHz
Click to expand...
Click to collapse
http://www.qualcomm.com/snapdragon/specs
go down to the part that says World’s First Mobile Single Core at 1.4GHz and the MSM8655 is listed...

I've ran it at 1.8Ghz with no instability, but at a significant power cost. I currently run at ~1.4 with smartass on.

Related

[Q] OC Experience anyone?

I'm currently running phoenix ultimate w/Tagrak.
It's OC'ed at 1.3 GHz ATM.
It has made a seeming performance change to my phone. But i want to take it further and OC to 1.5 or even 1.6 if possible. After hours of researching, the CPU in the Cappy is capable of running at 1.6 at the fastest.
Does anyone know any APP that will allow you to OC higher than 1.3 GHz? and has OC'ed higher than 1.3?
Thanks a bunch
What kernel are you running? AFAIK the only kernel that supports 1500/1600mhz is Onix, which is the kernel I'm running. Best OC experience I've gotten on the captivate was 1344. I was using Phoenix with the Paragon 1344 kernel.
Once you get Onix, voltage control will let you OC to 1600, but you might not even be able to hit 1400 and stay on for more than 5 mins (my situation)
I'm pretty sure this should be in Q/A, no?
There is already a thread in this section (currently 4 posts down) about this topic.
I've been running a custom oc at 3200mhz stable for 3 days now.
ninjuh said:
I've been running a custom oc at 3200mhz stable for 3 days now.
Click to expand...
Click to collapse
3.2ghz?? On what your laptop???
studacris said:
3.2ghz?? On what your laptop???
Click to expand...
Click to collapse
no reason the chip cant do that running @ 3volts with dry ice or liquid nitrogen cooling
superasian827 said:
I'm currently running phoenix ultimate w/Tagrak.
It's OC'ed at 1.3 GHz ATM.
It has made a seeming performance change to my phone. But i want to take it further and OC to 1.5 or even 1.6 if possible. After hours of researching, the CPU in the Cappy is capable of running at 1.6 at the fastest.
Does anyone know any APP that will allow you to OC higher than 1.3 GHz? and has OC'ed higher than 1.3?
Thanks a bunch
Click to expand...
Click to collapse
the kernel needs to support the different timing modes used. onix will allow up to 1600. to my experience nearly all phones go up to 1200 a vast majority to 1280-1300 im barely stable @1300 myself. but 1344-1400 is the limit with only a few exceptions. every chip is different and i have a feeling the earlier phones had less consistant manufacturing. samsung may also be cherry picking chips that clock better for the galaxy s 2 mini which is supposed to be a hummingbird clocked up to 1400 out of the box.
keep in mind that 30% overclock is significant. if i tried that on my pc it wouldn't run very long.
I can get mine stable at 1.4 using Onix kernel and Serendipity rom. I tried 1.5 and 1.6 but was not able to get it to run.
I've come to the conclusion that OC achieves very little... UV even less.
Sent from my Captivate
Dani897 said:
keep in mind that 30% overclock is significant. if i tried that on my pc it wouldn't run very long.
Click to expand...
Click to collapse
My computer has just over a 35% overclock on the CPU...
I went from 2.8 GHz to 3.8 GHz.
Sent from my Captivate
MikeyMike01 said:
My computer has just over a 35% overclock on the CPU...
I went from 2.8 GHz to 3.8 GHz.
Sent from my Captivate
Click to expand...
Click to collapse
A ) im guessing not on the cheapo heatsink they sold you with the cpu unless it is one of those "black edition" something or other chips that are marketed towards overclockers
B) i dont see aftermarket heatsinks out there for cell phone processors
Dani897 said:
B) i dont see aftermarket heatsinks out there for cell phone processors
Click to expand...
Click to collapse
Just wondering. Is it at all possible to squeeze in an effective heat sink on the captivate? would be an interesting mod to have.
My Cappuccino can run at 1400 stable, but the extra 400 MHz didn't really make a difference.
CM7 Inspire 4G

[Q] 1.6 Ghz OC cpu damage?

hi all, i was just wondering, will OCing my captivate to 1.6 Ghz damage the CPU?
thanks!
stewi21 said:
hi all, i was just wondering, will OCing my captivate to 1.6 Ghz damage the CPU?
thanks!
Click to expand...
Click to collapse
Couple of things for you:
First, I doubt your device will run stable at 1.6 GHz. Most Galaxy S-type devices won't run stable above 1.4 GHz, and while some do, only a very lucky few can run at 1.6 GHz.
Second, yes, you can damage your CPU doing that. Higher clock speed = more heat generated & more time at higher voltages. That means more chance of doing physical hardware damage to your device.
That being said... you are *probably* not likely to do harm to your device if you overclock to 1.6 (and it manages to be stable) and you aren't running benchmarks 24/7.
I think the real question for you, is why would you want to run your device that fast? If you want high benchmark scores to impress your friends, just cheat Quadrant, way easier, and less chance of causing problems. If your device is so unresponsive at it's current speed, then find a different ROM/software setup.
1.6 GHz should never really be necessary.
oh okay, it hasnt actually arrived yet, i was thinking it would help running games meant for dual core procs.
thanks for the reply!
stewi21 said:
oh okay, it hasnt actually arrived yet, i was thinking it would help running games meant for dual core procs.
thanks for the reply!
Click to expand...
Click to collapse
Take a look at Chainfire3d with the Nvidia module.
Long story short, all of the current "dual core" phones are running Tegra2. But Tegra2 GPU <= Hummingbird GPU.
Problem is, games optimized for the Tegra will have a harder time running on our PowerVR. Not because of graphics horsepower, but because of specific optimization done by the programmers.
Chainfire's driver deal should help with that, in fact there is a thread floating around here somewhere with all the files you need.
PS Don't worry about those dual cores phones beating up on your little Captivate. Once you get it rooted, loaded up with a custom ROM and kernel, and running Gingerbread, I think you'll find none of the competition comes close...
I tried 1.6 ghz once and it was like insta-freeze. I'm very stable at 1.4 though.
Samsung Captivate running Paragon RC6 with 1.4ghz kernel.
Sent from XDA android app.

[Q] (Q & A) 2 Ghz Processing?

Is is possible for us to overclock our infuse to 2 Ghz? It's kind of lame that we are stuck at 1.6 Ghz when SGS i9000 are overclocking theirs to 1.7 Ghz and they have a weaker processor than us! Just wondering. Thanks!
niral7 said:
Is is possible for us to overclock our infuse to 2 Ghz? It's kind of lame that we are stuck at 1.6 Ghz when SGS i9000 are overclocking theirs to 1.7 Ghz and they have a weaker processor than us! Just wondering. Thanks!
Click to expand...
Click to collapse
We can get up to 1.8 Ghz last time I checked.
Sent from my SAMSUNG-SGH-I997 using xda premium
Kevinr678 said:
We can get up to 1.8 Ghz last time I checked.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
1.8 Ghz? How?
Excuse me, I should say you can get it to 1.8, but 1.6 is the the highest that's really stable. I seem to have read that may people have gotten 1.8 with few issues however.
Sent from my SAMSUNG-SGH-I997 using xda premium
There was a kernel that reported 1.8 incorrectly.
I have looked at those 1.7 GHz kernels and there is some interesting development going on with voltages to make it more stable but it is a weird bastard conglomeration of clocks and those kernels have there own issues. The limiting factor it's not the quality of the CPU but that the multipliers are locked at no more than 8 times the buss speed. Overclocking beyond 1.6 means buss overclocking which causes all kings of issues that must be worked through often by under clocking other things. most infuses are perfectly stable at 1.6 with no special treatment like exists in those 1.7 kernels but heat can run away and cause crashes when using the cell and GPS radios. It would be cool to run some benchmarks on Miui with 1.7 GHz to see if you can break 5000 in quadrant but really it is only 6% more than what we have in a perfect stable form. Not to mention that the CPU is throttled and would rarely see that speed and tweaking the governor would probably do more for the user since going to 1.7 means compromises in other clocks and potential problems.
It's not a matter of possible but a matter of why?
And for the record the best experience I had with my captivate was on froyo with glitterballs' stream kernel which had some cool stuff going on with hardware acceleration running jfs lagfix at 800 mhz. If I could get some of that in a GB kernel that I could run at 600 or 800 mhz with the insane undervolt my CPU can tolerate I'd be in heaven. Battery life for days!

Overclock to more than 1.5ghz??

Is it possible to overclock the CPU to more than 1.5ghz? Most ROMs only go to 1.5.
I'm asking because the sensation xl has the same CPU but people are overclocking that to over 1.5 safely.
Virtuous Quattro ICS rom (and its kernel) goes to 1.9 safely
Is there a kernel that is compatible with sense 3.0 or 3.5 ROM?
i'm not sure, i dont use a sense rom
325i. said:
Is there a kernel that is compatible with sense 3.0 or 3.5 ROM?
Click to expand...
Click to collapse
Yes. Endymion/Hyperion kernels allow up to 1.5Ghz.
Unity9 allows up to 2ghz. Its mot recommended however, as the kernel is old, and 2ghz isnt safe
Sent from my HTC Desire S using xda premium
olyloh6696 said:
Yes. Endymion/Hyperion kernels allow up to 1.5Ghz.
Unity9 allows up to 2ghz. Its mot recommended however, as the kernel is old, and 2ghz isnt safe
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
Yeah but is there a sense kernel that allows higher than 1.5?
325i. said:
Yeah but is there a sense kernel that allows higher than 1.5?
Click to expand...
Click to collapse
Yes.. I just said Unity9...
It's not recommended. It's old and has bugs with the front camera.
In the first place, you shouldn't OC higher than 1.5ghz. The chip isn't designed to run a frequencies higher than 1.5ghz for ling periods of time. In the long run, you will damage to motherboard, fry the chip etc. Battery life will also be significantly shorter too.
If your intentions were to do that, i don't think you should have got this phone in the first place, and you should have just stuck with the Sensation.
Sent from my HTC Desire S using xda premium
325i. said:
Is it possible to overclock the CPU to more than 1.5ghz? Most ROMs only go to 1.5.
I'm asking because the sensation xl has the same CPU but people are overclocking that to over 1.5 safely.
Click to expand...
Click to collapse
the sensation xl is shipped at 1.5GHz. There's no need to exceed 1.2GHz in my opinion, at least not yet.
dan-fish said:
the sensation xl is shipped at 1.5GHz. There's no need to exceed 1.2GHz in my opinion, at least not yet.
Click to expand...
Click to collapse
The Sensation has a dual core 8260 Snapdragon CPU, our has 8255 (single core) so i think that 1.5 Ghz for the DS is more than enough and safe, also reading somewhere that the 8255 is designed to run at 1.4 Ghz as an optimal freq and that the mobile manufacturers are free to undercloock/overclock for specific needs
I personally use the 8255 at 1.1 Ghz...never had lags
Hey,
I limited all my kernels, Hyperion, Endymion and Reaper kernels to around 1.5GHz, as it is way more than enough. I did this for some reasons:
- As it has been discussed all over these forums, devices handle OC/UV differently, no matter if the cpu is the same. This has to do with sheer luck with what part you get from the factory, your phone is only guaranteed to work at up to 1GHz. It may seem stable at 1.5 but reboot once a week, some phones may not boot at 1.2, and some phones can chug along happily at 2GHz.
- Every newbie that lands on these forums will instantly set the frequency as high as they can. Then they will get a freeze now and then. Then they pull the battery. Then they kill the phone. THEN they check the forums and read that they should not have pulled the battery.
- With my current roms, where the kernels are tested, there is no need for overclocking. Things run very very smooth at stock values. But I believe in "power to the user", that's why I even give the option to OC. The last time I had to overclock my phone due to lag/choppiness was with Virtuous 2.39 or whatever, months ago.
So ask yourself why you want to go higher. Bragging rights? Quadrant scores to show your mates? Do you even notice a difference between, let's say, 1.2GHz and 1.5GHz? Is it really worth it?
Think about it.
Cheers
So much detail, couldn't have said it better myself In short, 1 Ghz is enough for most, 1.5 is more than enough. Anything above that is DANGEROUS and should be avoided.
Sent from my iPod touch using Tapatalk
cpx07 said:
The Sensation has a dual core 8260 Snapdragon CPU, our has 8255 (single core) so i think that 1.5 Ghz for the DS is more than enough and safe, also reading somewhere that the 8255 is designed to run at 1.4 Ghz as an optimal freq and that the mobile manufacturers are free to undercloock/overclock for specific needs
I personally use the 8255 at 1.1 Ghz...never had lags
Click to expand...
Click to collapse
Yeah, that's the regular Sensation.
We are taking about the XL which has a single core 1.5ghz CPU.
+1 agree with lowveld. I Never OC'ed for normal usage. I don't feel the need. You can't tell the difference in performance IMO
Sent from my HTC Desire S using xda premium
I'm sorry if I missed the point, but is there anything overclocking that much is necessary for? I mean, I'm at 1,3 GHz max now but my phone runs at 1 GHz 60% of the time, rest of the time lower. I never reached something above 1 GHz.. ?
So why overclocking even more?
Edit:
My mistake, 60% of time it's at 245 mhz and only 30% of time at 1GHz.
But my question is still the same..
Sent from my HTC Desire S using XDA App

CPU Frequency

Maybe some other 701 users can verify.
I was under the assumption that the Tegra 3 in the 701 was supposed to be 1.3ghz. At least all the specs say so.
Just got mine yesterday, and SystemTunerPro and SetCpu show it to be 1.4ghz.
Did I miss something in all the marketing specs??? Or did Acer pull a "fast one"?
MD
I've seen conflicting specs on the 701. Some sites say 1.3, some say 1.4. Will be interesting to see what the other 701 owners confirm mate :good:
Tegra 3 can go one point up in hard conditions.
It is still 1.3 ghz
A Tegra 3 running at 1.2 ghz can go up to 1.3
The 1.6 ghz of the Infinity can go up to 1.7 ghz
Etc...
Latoc said:
Tegra 3 can go one point up in hard conditions.
It is still 1.3 ghz
A Tegra 3 running at 1.2 ghz can go up to 1.3
The 1.6 ghz of the Infinity can go up to 1.7 ghz
Etc...
Click to expand...
Click to collapse
I can understand that in a sense. But was just surprised that the CPU is adjustable up to a set 1.4. Most devices that advertise a certain ghz, usually are set at that until you modify the kernel for OC/UV.
Thought the Infinity 700 3/4G was still slated to use the Qualcom S4 processor?
MD

Categories

Resources