802.1x EAP network is kicking my butt. Anyone else having issues with it? I have managed to connect to the network but am unable to connect to the web.
So once it is connected i get a ip address
my current settings are:
EAP method-PEAP
Phase 2 authentication-none
ca cert-unspecified
user cert-unspecified
identity-my user name
anon identity-
passsword-my password
ip settings-DHCP
Like i said i am able to connect but nothing else. Any ideas?
Related
Hi everyboy, I have an Blue Angel with WM6.5.3 from sun_dream. I can't connect to my home wifi or any wifi. I configured my router like this:
DHCP off
Wirless all
WPA-PSK
TKIP
64bit
I can't connect even to open wifi accespoints(hotspots).
I start the wirelss manager, tap on wirelss on and after that the wireless network appears. I click connect and nothing happens. In the network manager the connectios is available, i click connect, it says connecting and than again it says available.(any hot sopt or the home network, for that at home i entered the mac into the router and have written the ip an dns to the phone wirelss card)
Pleas help, it is a great phone i like it but this is the only problem i have.
PS: I even commanded an bluetooth gps unit. Is there any way to change the hardware and install an "g" wireless card?
Shouldn't DHCP on your WiFi router be set to 'On' and also for the phone as well. It will select an IP address for your device, which will then pick it up.
Otherwise you will have to allocate an IP address on the router, and then set the phone to the same address. If they don't match it won't work
It's a lot easier to let DHCP do all the donkey work. In most public areas DHCP is used as it is a 'Start it and forget it' system.
I set dhcp off because i assign an ip adress to every pc manualy and even have an mac filter where again the ip is written. I set the same ip on the phone as i had written it in the router config.
I can't acces even public wireless spots. I have the problem that it says the connection is available and then it says connecting and instead of connected it says avaialble.
Hi Guys
I need some help connecting to Wifi 802.1x with PEAP security at work.
I tried the following steps:
"Open Wi-Fi Settings from Settings, Wireless & Networks
If need be, write down the SSID of the 802.1x network (Case sensitive)
Select Add Wi-Fi network
Enter the SSID, select security 802.1x Enterprise, EAP method is PEAP, Phase 2 authentication is None, CA certificate and Client certificate are N/A, Identity is your RADIUS or Domain Authentication username, Anonymous Identity can be left blank, and Wireless password is the password to match your RADIUS or Domain Authentication password."
But after i finish the above config the SSID network is just saved in my WiFi list. It does not detect the network and connect to it. (it does not show the icon to the right which says the network is broadcasting)
Please help!
any answers???
You could try the FullWifi app. Something in the standard wifi app seems to be defunct at least on my captivate so I'm using the FullWifi app to setup the network.
Give it a shot. Can't hurt.
I run 802.1x encrypted with AES and EAP via a Win 2k8R2 server running NPS (RADIUS) and authenticating via MSCHAPv2 to Active Directory at home. Yeah, I'm kind of a geek.
Anyhow, try this: Delete (or 'forget') your network from Android. Since you said your network is brocadasting the SSID, just chose the right network from the list. Choose the following settings:
EAP method: PEAP
Phase 2 authentication: MSCHAPV2
CA cert: Unspecified (Adding certs to Android is a PITA)
User cert: Unspecified
Identity: <userid> (NOT <domain>\<userid> or any permutation and it is cASe SeNsiTivE).
Anonymous identity: _blank_
Password: <password>
Press Connect.
If this does not work, repeat using different Phase 2 Auth.
If the RADIUS server is Linux, try None, then PAP, then MSCHAP, then MSCHAPV2.
If the server is Windows, try MSCHAPV2, then MSCHAP, then None, then PAP. Try GTC last, as it is the least used that I've seen.
If the server is OS X, then just give up dude. Macs suck so hard that I'm surprised it hasn't swallowed up your network and given everyone that you've ever known cancer.
I really hope this helps.
Awesome fatbas202, your instructions worked for me. The default Phase 2 authentication won't work - TRY "MSCHAPV2" if you want to connect to PEAP wireless network at office/school. Thanks a million!
bking007 said:
Awesome fatbas202, your instructions worked for me. The default Phase 2 authentication won't work - TRY "MSCHAPV2" if you want to connect to PEAP wireless network at office/school. Thanks a million!
Click to expand...
Click to collapse
Word.
10char
i managed to find some guides here and downloaded wpa supplicant file, i can see ad hoc networks but i cant connect to them, (*) they have this in front
i get stuck at obtaining the ip address if i manually set ip address then i can connect but it disconnects me as soon as i do get connected, on my laptop it just says waiting for users...
i am running android 2.1
i wonder if it's a windows problem as it doesn't assign the ip obviously?
any help is aprieciated
Hi,
at work the WiFi network uses EAP authentification (with a certificate). Is there any way I can connect to this network? Will it be possible with Mango?
Thx for your help
Sent from my LG-E900 using XDA Windows Phone 7 App
Okay, I'm no Wi-Fi expert but I was able to connect to my school network (which I think was WPA2 Enterprise) by entering my domain login credentials and then accepting a certificate. It has worked since the NoDo update.
I have a similar problem here: university wifi with a wpa2/AES-enterprise network and only a certificate to connect to...
If I try to connect the phone asks me username and password (the domain credentials?), but I don't know them.
More info about the network here:
3*w. wifi. polimi. it/en
I need to connect to "Polimi Protected" and "Eduroam"
Samsung Omnia W with software 7.10 (7740)
Thank you
My personal (home) connection is WPA2 Enterprise / AES2 WIFI setup.
and my phone can connect just fine, stats below.
How to set up ADSL and Ethernet connection to the VM8650?
ADSL needs a username and password?
I do not know which username and password?
The Ethernet settings when set to dynamic IP, ETH icon shows but no active connection and when I set a static setting ETH lose an icon.
Help anyone!
The provider gives you a username and password for the adsl-service. try this or ask him
You don't need an adsl user name and password.
I assume you are trying to connect to your wireless. Then you need your wireless passphrase or password. If you don't have it you need to go into your router or modem to get it. If you don't know how to do that call your isp.