Hi,
at work the WiFi network uses EAP authentification (with a certificate). Is there any way I can connect to this network? Will it be possible with Mango?
Thx for your help
Sent from my LG-E900 using XDA Windows Phone 7 App
Okay, I'm no Wi-Fi expert but I was able to connect to my school network (which I think was WPA2 Enterprise) by entering my domain login credentials and then accepting a certificate. It has worked since the NoDo update.
I have a similar problem here: university wifi with a wpa2/AES-enterprise network and only a certificate to connect to...
If I try to connect the phone asks me username and password (the domain credentials?), but I don't know them.
More info about the network here:
3*w. wifi. polimi. it/en
I need to connect to "Polimi Protected" and "Eduroam"
Samsung Omnia W with software 7.10 (7740)
Thank you
My personal (home) connection is WPA2 Enterprise / AES2 WIFI setup.
and my phone can connect just fine, stats below.
Related
I cant figure it out, I just installed the latest v. WM6 Rom (http://forum.xda-developers.com/showthread.php?t=297256)
Internet Sharing via Bluetooth works but... when i start my vpn either via ssl or ipsec (on laptop) NOGO. something is in between dont know what...so workaround:
Internet sharing via USB: the device tells me "connected", the new Network connection in control panel/xp tells me "connected" but there is no Internet connection. I try to ping 192.168.0.1 which it made gateway and this is not found. nothing nada. firewall off. nogo. repair. nogo.
*argh* I realize it are 2 different problem but in short: I can not connect as I usually did under the wm5 dialer (and I miss the status lights).
Anyone has a clue?
Hi !
I have the same problem with the same ROM. I didn't found any solution yet.
I didn't try Internet connection shring with Bluetooth. But your problem sounds as a proxy setting problem on your PDA connexion. You should take a look at those settings...
Let us know if you find anything.
edit :
Finally it's working, I re-installed ActiveSync 4.5 and now it's OK.
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working?
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working? Heres my errorlog:
21:24:55.190 Logon request sent to VPN server 111.11.111.222...
21:24:55.190 Wait for asynchronous action to complete.
21:24:55.230 A VPN logon message 1 was received.
21:24:55.230 Accessing digital certificate...
21:25:00.818 A VPN logon message 2 was received.
21:25:00.818 Negotiating encryption keys with the VPN server (111.11.111.222)...
21:25:02.290 A VPN logon message 3 was received.
21:25:02.290 Authenticating with the VPN server (111.11.111.222)...
21:25:22.349 The VPN logon response was received.
21:25:22.349 The local address is 192.168.1.78.
21:25:22.349 Last login error set to 118.
21:25:22.349 'LogonToIPSecTunnelServer' failed.
21:25:22.349 FSM error in state 'AuthenticatingTunnel'.
21:25:22.349 !Error 118 No response from IPSEC terminator during authentication. (error 118).
21:25:22.349 ---------- Change state to 'BeforeTunneling'. ----------
ah... I have it... stupid me.
sorry. stupid. forgot the checkmark on the authentication tab on the auto-created controlpanel > networkconnections > Windows Mobile 6 Connection > Authentication.
Great!
For reference, using the Cisco VPN client, with Bluetooth and internet sharing, does not work. With WM6, a Bluetooth PAN adapter is created on the PC, and the Cisco VPN doesn't bind to this type of adapter.
Using the same config, but with the USB cable, and the wireless modem, does work.
Unfortunately It does NOT work anymore.
Whatever I try I can not get connection to the Internet
- I start "connect"
- Plugin the usb cable
- The new network connections icon appears under network connections
- It pops up it is connected
- It has an assigned 192.168.0.2
But no internet connection, ping 192.168.0.1 can not be reached, etc...
I turned off the firewall to see if this was the problem. not.
Is there ayone who has got a clue? This is really frustrating.
For what it's worth, I'm using WM6 Black 2.5 on a Hermes (Cing 8525) and I'm able to use WM6 Internet Sharing via BT to connect my laptop to the internet and I am able to use my Cisco VPN client on my laptop to connect to my company's intranet. No problems here so I don't think it's a WM6 problem.... rather a configuration problem... either on your company's VPN concentrator side or your client side.You may want to chat with your IT/Ops dept for configuration settings.
No problems here nither. I use Vista on PC. I need to connect to several networks and just have made some tests. I could reach all of them. The fact is that most of them are built on Draytek routers not Cisco, but they also use IPSec and so on.
Yep I'm having the same problem, my VPN's worked fine with WM5, but went to Black 2.5 and now when I VPN, it connects, assignes me an IP, but wont let me ping the network.
I _think_ it's becuase now the fone shows up as a network rather than a modem, and assigns me a 192.168.0.x address, and the home network is in this too... any suggestions?
share internet connection with ppc
Can i use my ppc as the wireless adapter? do i need to use "wireless modem" or "activesync" to do this? For more detail, if my computer do not have wireless adapter, and now i want to use the wireless adapter on my ppc to connect to the internet. Is it posible?
hi greetings to all. I am new in this foum. I have bought a new smartphone and it brought me to this forum for support.
I have htc s710 with wm 6. Is is possible to access internet on the phone by connecting it to the laptop through wi-fi in adhoc mode? I tried connecting it, and connection was established, I was as well able to ping the phone from my laptop but i was unable to use internet. I want to use laptop as a wireless router.
in the laptop i have ethernet connection which brings internet to my home, and i have enabled ics in that. the wi-fi card has been assignd ip address 192.168.0.1, and mobile has ip assigned 192.168.0.2.
is it possible in this way?
If your notebook has a bluetooth module built in, establish a BT ActiveSync connection and your S710 will then use the computer's internet access automatically.
i dont hava BT in my laptop. I just have a external orinoco gold wi-fi card.
is it possible through that.
I've never tested it cause I use a WAP router. ICS worked crappy when I tried it.
Did you try using DHCP instead of setting a fixed IP on your S710? ICS offers DHCP services and IIRC depends on it. Also remember that you normally can't set a DNS server on WinMo. Does ICS offer its services on all network cards or don't you have to activate the card you want ICS to serve on in its settings?
Thanks for the response. I have not tried DHCP, let me see today if it works that way.
Hi, I searched this concern before cause I wanted to use wifi too in the office. I'm not sure where the thread that I read had been sucessfull but it did gave me the idea to set mine and get it working.
Basically I have LAN connection in the office, connected to my Dell Latitdue d600 and created ad hoc connection to my HTC Touch.
I opened network connections, and right click my lan connection, advance tab, and enable internet sharing using wireless connection, thats the only thing i did, after establishing the adhoc connection, IP address in Pc is the same, 192.168.0.1 and subnet mask is 255.255.255.0 hope you get it working. I dont have a smartphone to test it myself
Hi piper. my problem is fixed now. i connected the phone to the laptop at adhoc mode, applied static ip. then ran network setup wizard. after the setup was complete i changed the ip setings of the phone. i set the phone to acquire ip form dhcp server.
neesad said:
Hi piper. my problem is fixed now. i connected the phone to the laptop at adhoc mode, applied static ip. then ran network setup wizard. after the setup was complete i changed the ip setings of the phone. i set the phone to acquire ip form dhcp server.
Click to expand...
Click to collapse
Oh nice to hear, I'll keep that in mind when my friend ask me how to do it with his Smartphone
neesad said:
i set the phone to acquire ip form dhcp server.
Click to expand...
Click to collapse
Can you explain how?Does it works on vista?Tanks for replying
ueghio said:
Can you explain how?Does it works on vista?Tanks for replying
Click to expand...
Click to collapse
Well I have tried that on my windows xp machine. However, when you enable ICS then I think it will provide ip to connected devices via DHCP. I just enabled phone to acquire ip via DCHP by going to the phones, Connection manager -- > Settings --> WLAN Settings --> Connection status ---> Menu --> IP Address --> And select Use server - assigned IP address.
Step, first enable ICS in your laptop -- > apply ip address to your phone like 192.168.0.2 255.255.255.0 and then connect your phone to your laptop in adhoc mode. Once the connection is established go to phone and change the ip address settings as given above ie. select server assigned ip address. i USED THIS MODE AS THERE WAS NO OPTION TO APPLY DNS IN THE PHONE.
how to connect ma phone to a wireless laptop
i have an htc HD2 running android ice cream os but de wireless is weak.how do i connect de phone to a wireless lenova laptop runnin windows 7.thank
habboc said:
i have an htc HD2 running android ice cream os but de wireless is weak.how do i connect de phone to a wireless lenova laptop runnin windows 7.thank
Click to expand...
Click to collapse
You would get a better answer asking this in the HD2 forums, mate
habboc said:
i have an htc HD2 running android ice cream os but de wireless is weak.how do i connect de phone to a wireless lenova laptop runnin windows 7.thank
Click to expand...
Click to collapse
you can use Wondershare MobileGo for Android
802.1x EAP network is kicking my butt. Anyone else having issues with it? I have managed to connect to the network but am unable to connect to the web.
So once it is connected i get a ip address
my current settings are:
EAP method-PEAP
Phase 2 authentication-none
ca cert-unspecified
user cert-unspecified
identity-my user name
anon identity-
passsword-my password
ip settings-DHCP
Like i said i am able to connect but nothing else. Any ideas?
Hi,
I've been trying to connect my Desire Z to a VPN that's setup on Windows Server 2003. I've installed the user/CA certificates in my phone, and setup the L2TP/IPSec CRT VPN on the phone. However, when I try to connect, it fails. PSK mode works, and the VPN server is fine since I'm able to connect via a Windows 7 PC. However, when I try to connect to it with my phone, it fails. Using Wireshark, I'm discovering that the failure happens during the key exchange portion. The server requests my phone for the certificate, and doesn't receive anything in return.
Does Android have any specific VPN configurations that I need to set? Also, is there way I can access any logs that say why the server certificate request isn't responded to?
Thanks.
Anyone ?
I am using DXPK9. My 9001 can connect to my home-used wireless router through WPA2-PSK. However, when I am in the company, it can't connect to the enterprise WLAN. The enterprise WLAN use 802.1X EAP. When I used my old G7, I just input my domain username and password. But this doesn't work on 9001. After I input my domain username and password, the connection keep connecting and disconnecting.
Please help!
Trying to post in the right section might help you to get answers