Hello to all,
I bought a new HTC model A6288 G3 + Hero and I pressed the button "Return to factory settings" with both SIM and microSD removed. Window opens to restart Windows, then the indication is "Tap the screen to set up your Windows Phone." I clicked and pops with "align screen" after I used the stylus to align. Hence no longer happen. I can't go to the next step, though I left the phone open longer. To turn off my Pocket PC I must remove the battery.
In the Add / Remove Programs I have left only three programs, but to Explore My Windows Mobile-Based Device, Windows folder is there.
Please help me to solve the problem.Thank you very much.
My HTC Surround fell out of my hand while on a bike going very fast down a hill and into a puddle of water, and when I got it out it wouldn't turn on. When it finally did my phone was completley wiped and reset and I had to sign in with a different Windows Live ID. Then all of a sudden my phone restarted and turned on and it was back to the original way it was before I had dropped it. It was fine for a few hours until it died, then whenever it rebooted it did in the bootloader screen. When I called HTC I got some hard to understand foreign woman and all she told me to do was a hard reset which doesn't work because when I go to press the volume down button to select the reset option it does absolutley nothing. I have tried the Camera button + Power + volume to downloader mode but it just sits in download mode then reboots into bootloader. It is not recognized by the computer unless it's in Download mode or "connect to pc" mode and Zune tells me that theres an error and it cannot fix the device. I downloaded the Windows Fix Tool and it also says the device cannot be fixed and there's no restore point. And I cannot take it to HTC or AT&T because I am out of warranty. So, any ideas here? Is it completley done?
Dude you should've took the battery out first thing, but it still could be salvageable.
You could try the rice trick:
http://www.ehow.com/how_5043830_dry-cell-phone-out-rice.html
Good luck!
Im running on mango but wondering what could be the problem with the phone as it just keeps rebooting when I just updated my whatsapp this morning.
Currently, the problem is after i update and installed the Whatapps, I tried to use the Whasapp to see what is the changes. Then, one of my friend sent to me a message through Whasapp and suddenly my phone crashed (Device Turned off) and keep restarting. Now it stuck at "HTC" logo and it will continue restarting again n again.
I already tried to press the power button, take off the sim card and put it again but same thing keep happening. And i also tried to connect to Zune and Zune is not detecting my phone.
My question is there any alternative way or is it possible to do a software restoration or hard reset?Anyone else experience this kind of problem?
============================================================================================================================
UPDATED: Can boot now after i did "Hard Reset" to my phone but all the data wiped out and restored as a new factory.
How to do "Hard Reset" for HTC Radar:
If your device is not working because it is frozen or keep restarting then you wouldn't be able to reset it with the software. So the next option would be the hardware method.
1. Press and hold down the Power button + Volume Up & Down button all at the same time until the device vibrates, now let go of the Power button while continuing to hold down the Volume Up & Down button.
2. Shortly you should see the message displaying Factory reset option from there, you must make sure that Factory reset option is highlighted. If not, U can choose it by pressing the Volume down button.
Owh man..this thing really make myself panic. So i would like to share with you all if u guys having the same problem as mine. The latest Whatsapp update really messed me up
============================================================================================================================
My current problem after Mango update (9 Dec 2011)
I dont think the Whatsapp cause the WP7 crash.. I would say the latest update from Mango really messed me up.
I found that, Facebook notification is no longer appear as usual.
I already tried to sync many times but still unable to show my notification. The error is "No notifcationss to show".
2nd thing, the logo of "E" (edge) at the top carrier bar wont disappear eventhough i off my Cellular data and restart my phone.
I never encounter all these kind of problems b4 i update to the latest one.. =(
Please look forward into this issue. Thanks
You use the HTC Radar, right? Why would you update to Mango? Isnt it factory shipped with Mango?
Surprising to see such issues with a Gen2 device. Maybe it is just a one-off situation.
My Rooted Xperia Z3s screen is completely smashed, but the display works. I want to back it up to my computer using Media Go and get a new phone. Initially, when I use this mirroring app it doe sent ask me to do anything, all I do is plug it in and it starts working so I can unlock my phone using it. Since the backup stopped working I had to start it again (I canceled it) and the phone got unplugged. I plugged it back in, and know a popup comes up saying ''The computers RSA key fingerprint is: XXXXXXXX'' then a check box saying '' Always allow from this computer. I know what this is and pressed ok with the check box ticked on this same computer already, and know it is asking me again. It wont let me use the screen mirrored until I check it, and the screen is unresponsive. Is there type of button that I can use to press ok? Thanks
P.s
NEVER BUY A SONY XPERIA PHONE
Plug in mouse via USB OTG.
3 days ago I've woken up to my "supernatural" work-out to find out the light on the side of the oculus is RED, which was funky cause it was plugged in all night.
SO, I've looked inside and saw that it's "Updating' I was all happy to get the latest version, but then it just finished, showed the logo blinking as usual and then - NOTHING!
Blank screen, after a couple of seconds - Again started up, Logo, Updating, Logo, Dead. -->> Over and over again and again!!!
I can't connect to it via the phone APP as it keeps restarting and going to update like mentioned, computer doesn't connect as well!
I tried holding down the buttons and factory reset the thing, it goes to Erasing -> Update - > Logo - DEAD! same loop, looks like the "Basic" upgrading is faulty so it can't even factory reset.
Tried to choose 'sideload' option from the "USB update menu" - no good! reboots to loop again.
I can get it to stay stiil if I pop up the 'USB UPDATE MENU' with the buttons and just leave it there, USB Connection to PC shows up 'Oculus ADB Interface' in device manager but I can't get the device to show on "Adb devices" Probaby because it's not on 'developer mode', maybe.
Tried to update drivers and to re'install adb.
PC app shows oculus as connected but I can't do anthying through there...
Contacted support 3 days ago - Nothing! they will look into it... NOTHING! sooooo angry!
EDIT>>
I have managed to pair once from the phone APP but as it "finished' the setup it went straight back into that update boot loop and can't connect again on phone.
Was hoping to manage to get it to developer mode and maybe force an update via adb.
I've been coding for most of my life, playing around with android phones software and such... so i'm not a complete idiot when it comes to these things but this one looks like there is no other choice but just sending it back for repair.
But these guys don't answer or anything... don't even know If I can send it or not, where to etc...
Boot loop:
https://photos.app.goo.gl/zsh8gws7eD8yRR4z6
Tried factory reset:
https://photos.app.goo.gl/h8GC7nurrkQnNsLe6
ANY IDEAS?
come on you guys!!! nothing?!
OK,
Found out I can make the device show in ADB Devices list if I manually load the USB Update menu (volume+power) and then choose sideload option.
However, this won't help much it disconnects from ADB as soon as it finishes loading the logo and restarts the update loop.
I tried to start the sideload as soon as it pops up in the device list, got to 4% serving and then connection was cut off...
If there was a mini update file (couple of KB\MBs) with some settings to make the oculus reset into sideload mode and stop looping i could sideloap a proper version and make it work again maybe.
Please someone help me fix the oculusssss pleaseee!
I same!!!
and oculus support said
"With that in mind, Oculus will not be able to offer warranty replacment/repair for this headset. I can only suggest that you consider purchasing a replacement device from our online store or an authorized retailer. "
fxxxk!!!!!!!!
You're great man. I didn't have such an issue, but I also didn't know the Quest had a menu like this.
Hey @Shlomikalfa - did you ever come back to this and make any progress? With the Quest 2 situation now, and FB logins required, I suspect a LOT more people are going to get interested in this idea.
Just to add, my Quest2 has being working just fine since I got it at launch from Amazon. I was playing beatsaber last night until it ran out of battery and shutdown. I plugged it in to charge and went to bed. This morning, I tried to turn it back on, and it went straight to the USB UPDATE MENU!!
I tried every single option in the USB UPDATE MENU, including factory reset, and it reboots and goes immediately back to the USB UPDATE MENU again. The only option that doesn't take you back to that menu, is POWER OFF! (LOL)
But if I power off, as soon as I power it back on, I got the same menu!
The volume buttons are not stuck at all... since I can use then to navigate the options in the menu.
So I just created a ticket at Oculus support to see what they say!
Good thing is that Amazon.ca gave me until January 31/2021 to return the headset... so if Oculus doesn't sort it out, I'll be returning to amazon for a refund!
Funny thing though. While in this "USB UPDATE MENU", I plugged it in my linux box, and it shows as a fastboot device! I can even run "fastboot reboot" and it indeed does reboot the headset!
I tried "fastboot flashing get_unlock_ability" just to see if it would say 0 or 1... but got an error: "FAILED (remote: 'unknown command')"
Does anyone want me try anything? (as long as the warranty is not voided since I'm waiting support answer! )