Related
Hi. This is my first time posting. I apologize in advance, im going to come across as a noob.
I got tired of waiting for google to get 2.3 to the N1 users. I decided it was time to unlock and root my phone, after all thats what it was designed for. Up until this point the phone was stock with all updates. I thought one touch root no longer worked. I dont know why i thought this. I used a guide to work through it. I cannot post links otherwise i would. ilikemygooglephone . com is where it came from
Everything worked according to this guide until I completed it and powered my phone on for the first time. I thought I was going to see a stock wiped nexus one...Instead I got shafted.
The phone reboots randomly. It happens quickly and unpredictably.
Notification bar will never slide down. If i try to the phone lags but never shows notifications.
No 3g
No wifi
The phone says I have no service (selected network tmobile unavailable) although I can still make and receive calls.
The sd card will not mount. I cannot access it on the phone. When pluggen into my laptop the phone will charge but wont give me the option to access the sd card.
At times the graphics are buggy and dont operate properly
There are probably other problems that i am forgetting but I think this says enough. Since i cannot access the SDcard I really dont know what to do.
Im sorry if this thread is in the wrong place or happens to be a previously answered question. I just really like my phone and I hope its not wasted. Can someone tell me what I did wrong or how i can get this right.
YEAH i noobed it.
I freaked out on the above issue for about 5 hours. Now I believe i have everything back to normal. My problem was i didnt load the proper superboot. Once i found the FRG83 one and redid the process using that instead it worked fine. Either i was using the wrong superboot or i had a corrupted download somehow.
Feels good to figure it out on my own though....i feel...less noob.....NAH
Today, I acquired a infuse 4g, off contract. I wanted to mess around with android, as my current phone is an iphone, and maybe switch over.
One of the first things I tried to do was tether my iphone to my infuse using mywi. I soon discovered android doesn't work with ad hoc networks. I googled a couple fixes, and decided to try my hand. I have never touched android before. I found this thing that said I could. So I went for it. After reading a few guides, I decided the first step was to root it using superoneclick. That went fine. Then, I read the instructions and it told me to 'flash the zip file using a recovery rom' which was total gibberish to me. So I did some more googling and found a modified 3e recovery thing for the infuse. I used some file system app to put that where it was supposed to be, but then saw that I needed clockworkmod to be able to flash things. By this point I realized I was far, far over my head, but stupidly pressed on. At about the same time, I also extracted the zip file from exop.pro, and replaced the wpa file that existed already in system/bin with the one from the zip. I also booted into recovery mode, and tried to install clockwork mod, which failed even though as far as I can see. Now, when I turn my phone on, everything is ok except that it can't scan for wifi. I assume this is because I ****ed with the wifi file. I've basically decided to give up at this point, so please, just tell me how to made it work again and I'll promise to not **** with it anymore. Also, I neglected to make a backup. Stupid, but I didn't know how and didn't want to go through another huge thing.
tl;dr
I tried to make it so I could connect to ad hoc networks on my infuse 4g and ended up destroying my wda_supplicant file in system/bin (i think) and
Google the original file you replaced, ' wpa supplicant file download for infuse 4g'. Next time save a copy or backup of whatever your doing.
Thanks, but I really have no idea what is what. Could you link me the right one? I'm sorry that I'm so useless.
Itaer said:
Thanks, but I really have no idea what is what. Could you link me the right one? I'm sorry that I'm so useless.
Click to expand...
Click to collapse
this was your problem the first time... you need to read and study before you just start flashing things to your phone man. haha... us linking you somewhere will not help you figure that part out... and its an important part of tinkering with these phones in the way you are trying to.
rid yourself of the apple mentality where everything is spoon fed.
moving on, however, do what the guy previous to me said... find that file you downloaded. and do some reading, watch some instructional videos, focus on just rooting the phone properly for now. do that, then read, watch, ask questions like you are doing when you need to, then proceed.
read comments and stuff in forums about the ROMs you are flashing, what kind of problems do they have, what recovery is recommended for that particular ROM, stuff like that. just READ everything and anything you can about what you are doing....
the company that made your newly found OS has a nice little search engine called google... and it works pretty well if you know how to use it i'll keep an eye on this thread for you as others are probably doing so we can provide you with whatever answers you might need. good luck!
a good rule of thumb when flashing hax0red software to these phones is when something ****s up, 9/10 times it's just a little tiny thing you missed or did during the install yourself... so back to square one, and pay close attention to detail. these phones can be a little touchy when flashing ROMs if you are not doing it exactly they way it is recommended.
perfect example of this: when i had my samsung moment... when i converted from 2.1 OS to 2.2... for some odd reason i would ALWAYS have to flash a little script zip to wipe the 2.1 data from the device before flashing the 2.2 zipped ROM to the phone... the 2.2 ROM was supposed to do this and take care of it completely for me, but even though it did, the only way it would work properly every time i was going from 2.1 to 2.2 was to flash that zip beforehand...
hope that long rant provided some useful insight
Thanks.
But I have read the instructions on the stuff I'm trying to do, several times, and like I said, I'm more confused that I was at first.
I'm just not willing to break it any further.
So basically what I'm wondering now is, how do I put everything back to how it should be. Is there a way? Like, is there a way to load the original software back? I don't think restoring it to factory settings would fix what I did, but tell me if I'm wrong.
I just want everything back to normal.
Please.
Edit: I know it seems like I'm not doing anything to help myself, but I have a lot on my plate in life right now, and I also have absolutely no idea where to even start. Half of the terms you use mean nothing to me, and I'm just so overwhelmed.
I just want to know if there is some way to put it back to how it came out of the box.
Turns out that once the new wda_supplicant thing is ACTUALLY GRANTED PERMISSION TO EXECUTE, that everything works fine. Thanks guys
see... Knew you would figure it out man
Sent from my EVO3D using XDA App
Hi guys, I'm having a problem rooting an HTC Aria that I recently acquired, and I'm not sure how to search for my answer. I guess Ill try to explain what happen as best as I know, since some things happened so fast I have no idea exactly what happened. Its also worth mentioning that I have no experience rooting android phones, but I'm not an idiot, so please don't be afraid to help because you think Im gonna be waste of your time.
I used the tool unRevoked with Reflash to inflict the damage. Things seemed to be going great, in fact at one point it even said this was a triumph. Somewhere towards the very end, it looked as if it complained about not finding a file on the sd. It was so fast I couldn't read it because I was looking at the computer at that time. Im not surprised it didn't find the file it was looking for since I had no sd card installed. The tutorial/procedure that I read was very detailed, so detailed that he sometimes took a minute to make sure the reader knew to double click the file to open it, yet there was no mention of absolutely needing an sd card for it to work.
Now when I re-run reflash, when I get to the point where you have to choose HBoot USB, it wont ever let me pick it. It just forces me to pick Fastboot or one of the other ones, spits out several lines of green text that is way too fast to read, then gives you the option to pick HBoot again. It never leaves this menu now, not by way of reflash anyway. I can still unplug and reboot my phone , and operate it like normal, but reflash wont go past that recovery menu. I did a factory reset, that didn't help. I also picked recovery on that menu. I browsed the options, but Im afraid to make another move at this point without some input. If someone could please maybe tell me what happened and how to proceed I would be very grateful.
Thank you
Please forgive me, as I have not searched the forum extensively for an answer, but I'm in a bit of a time crunch as I am leaving on a trip tonight and need to get back to some semblance of a working phone.
Some time ago I flashed some rom (I think Paranoid Android; I don't remember. I liked it enough to keep it, then I didn't worry about it again after that.) Little by little it started getting slower and buggier, but for the most part it worked fine, so I ignored it. For the last couple of weeks it started losing signal and data constantly, with no change to the phone. I kind of just lived with it because I could usually restart my phone and I would regain signal, but as of a couple of days ago, it would just drop off and not come back until it wants to.
I had the day off to prepare for my trip, so I decided I would try to go back to stock; there's almost nothing that I do that requires a custom ROM and I had no data issues on stock, nor does my wife on her Note. I looked around for a bit for instructions to restore my phone, and found some, but out of the handful of pages I went to, each one had at least one link that was dead, rendering the method useless, to me, a layman, at least.
I then decided I would just find a Stock Rom, thinking that might be the next best thing. I found Clean Rom on here and decided to try to flash that. I made a backup of my system, wiped everything, and then flashed it. Except something is wrong with the zip and keeps giving me an error message. I then tried to restore my back up that I had just made to try something else, but something happened to that, and it also wouldn't open. I tried the backup before then (quite old, as I haven't done any tinkering with my phone for quite some time) and it worked, but it tells me that my sim card is disconnected, so I have no data or signal. As it is an old restore, I'm not sure what the name of the ROM is, but I can provide all of the information needed, if someone needs that to figure it out.
Anyway, long story slightly shorter: I need to fix this today, and like as soon as possible. I will give ten dollars, count them TEN DOLLARS, to the first person who can provide a set of working links and very straightforward instructions as to how to get back to stock (or if there is a good working ROM that will give me FULL functionality with no flares that would be easier to do. Easy and fast are the key components to this request). I'm not dumb, but I am no longer immersed in the lingo of this community, as it has been a few phones back that I really cared about actually experimenting much with my phone, so non-technical language would be nice. I know what flashing and wiping means. Most of the rest, probably assume I don't.
Thanks.
Your best (easiest) option is probably to flash another stock ROM, or stock-ish ROM. There are quite a few options in the Android Development section. There are a couple of stock rooted at&t ROMs in the first couple pages, also a stock rooted Telstra ROM.
You didn't mention which carrier you're with, whether your phone is branded, or any of your important details, like your firmware/hboot details and whether you're s-on or not. If you wanted to go back to completely stock, I'd need to know those details. Going completely stock can/will be a longer process though.
Sent from my Evita
Okay, I'll try another one. I'm not sure why Clean Rom didn't work, but if another one or two don't work I'll come back here and I'll have you talk me through getting back to stock and I'll throw you a digital Hamilton.
Thanks.
Well, I tried another couple of ROMs. They installed correctly, but it says that I have no sim card, so I still have no signal. Maybe I some how deleted my radio when I did a system wipe while trying to install one of the ROMs? I'm not sure.
Anyway, for "more details" I'm on AT&T, I'm not sure what you mean by branded, but it's the HTC One X, the current ROM is 4.1.1. I haven't done S-On/S-Off, or anything like that other than unlocking the bootloader a long time ago. The kernel version says 304010-g240d4d5, the baseban version is 0.17.32.09.12_10.86.32.08L The Build number is 3.17.707.1 CL134054 release-keys.
I'm not sure which of that information is relevant or not, but that's everything I can tell you.
Never mind that last post. When I said in the first post that I'm not dumb, apparently I lied. My phone fell off a table this morning, and I guess it knocked the sim card loose, but it coincided with doing the factory reset stuff, so I thought they were connected. I pushed it back in, restarted, and now the stock ROM I'm using works great.
Thanks/Sorry!
Well, it turned out to be an easy solution (Occam's Razor FTW yet again).
But this thread made me think . . . why the heck does it seem so many people lately flash ROMs without doing a nandroid first? Its a no brainer to me. If you are trying new ROMs, and not sure how they will perform, why would you not give yourself an easy way to simply revert to your last known good config?
I couldn't agree more, but there's plenty of not-so-smart practices on here, so I'm not at all surprised.
Sent from my Evita
Yea. Nandroid ftw
Sent from my HTC One using Tapatalk 2
Hi all,
I finally decided to add a custom rom to my SK4G. I had retired it for a year or so, not from getting a new phone, but rather my youngest child dropped it in a mud puddle. I had put it in rice and all that good stuff. I was able to get it to turn back on, but it has very very very low battery. So I put it on the charger, and it would briefly show the charging symbol and disappear. So I had assumed that it was totally shot, And while I was disappointed, because I love this phone, it still was not surprising. I mean it was in a mud puddle right. LoL
Well about 2 weeks ago I got bored, and figured what the smudge, I will ticker with it. I figured, I couldnt do any worse to it than what was already done. So I once again tried to see if it would charge. Tried by wall charger, by car charger, and by USB charging. But alas once again nothing. Well my husband also has a SK4G. So I ganked his battery for a little bit, and lo and behold, it worked. Turned on flawlessly, and not one issue in the operating system at all. Well at least as flawlessly as a stock SK4g could get. lol
So I was thinking maybe the charger slot had shorted out for whatever, from it being in the mud puddle. I put the battery from my SK4G in my husbands phone and agin tried all 3 charging methinds, and still nothing. So I pluged my phone in with his battery and it went to charing just fine. Okay so, new battery. Not that bad, but I dont order anything over the net. I hate waiting, I live in a big enough city, I figured I could go to one of the electronic stores and get one.
So I tried 5 different places, no one had a replacement for it, but once gain I was impatient and didnt want to wait. Did some googling and found out Batteries plus carries a replacement for it. Wasnt thrilled by the fact that they charge 2 to 3 times more for it that other places. But whatever, if it got my phone running again, okay. I had my oldest son pick me up one on his way home from work. Gave him the stock battery numbers and all that. He brings it home, and I go to put it in and..................It is not even close to being a compatible replacement for the samsung battery. Went back down there and returned it. Told the sales clerk that their website was completely wrong. Upon looking through their wall of replacement cell batteries, I did find another battery that was a perfect match. Only to have the "Battery Expert" argue with me about it being the right one. Finally got him to stop running his mouth and bought the battery.
I had just recently ended my contract with t-mobile, and wanted to take my SK4G with me to a new carrier. Well in order to do that, I needed to unlock the network. So it was research time. Googled and found XDA. Which from then on has ben invaluable to the process. Found Sidekick 4G Unlocking *Follow Directions Closely written by troby86 and SuperOneClick - Root/Unroot Your Samsung Sidekick 4G by Ayoteddy .Had a few problems with SOC. It kept freezing at step 7. Took me a few to find the reason why ( answer is in the forums here, just took some digging and reading to find. The culprit was the "Exploit setting needed to be set to "psneuter". Changed that and finshed rooting with out any more problems on that part.
Next had to unlock the network, following the above mentioned thread. Tried it 2 or 3 times to no avail. Then it dawned on me that I hadnt rebooted after I got it rooted. So rebooted and tried the terminal part of it again. And Bingo! It took the commands or whatever you would like to call them. SK4G was now unlocked. Yay!
SInce I had already been in the forum looking at the unlock and root guides. I decided why not go ahead and put a custom rom on it too. I loved my SK I just loathed the software on it. Constantly freezing while surfing the net or trying to use facebook. I spent a bunch of time browsing the forums, reading the comments on all the roms and trying to decide which rom I wanted to use. I had orginally choose CM6-Merged.
So read the thread on it, and even watched a youtube video by sinesolder. The next task was to chase down all the files I needed to install that, plus the CWM stuff too. I flashed CWM using the app "Root Manager" in the play store. Next was to swap out the "recovery" file. Took a few mins to find it, but did. Placed it in the root of the SDcard along with the update zip. Downloaded Astro file manager from the play store. Went to bottem of list and copied the recovery file, then pasted in system/bin folder. Rebooted, clicked reinstall packages on the stock (blue) recovery screen. But it was a no go. it would not give me the orange CWM. It just ket saying E :file invalid, or some such rubbish. So back to combing the forums again. Had stumbled upon a post some where here, that said something about MNT/SDcard. And sure enough, I copied the recovery file from the MNT/SDcard directory, then pasted in the system/bin. Reboot again, reinstall packages and BAM Orange CWM! But before I flashed my first rom, i wanted to get the red CWM/voodoo recovery. That way I didnt have to worry about mounts while flashing. After much reading again in the forum, I found that the red CWM was already included with the Bali Kernal. Reboot again, then install from SDcard, choose Bali Kernal and installed. Woo Hoo red CWM was up and going. phew.... lol or so I thought. Plugged phone in and put CM6 - Merged on the SD. Back to recovery, wipe factory, wipe cache, wipe dalvik. Then install from SDcard again, chose CM-6 Merged.
This is where I had a bit of a panic. As I was not paying atternion the what Kernal or Baseband the rom was made to run with. So that ended up soft-bricking my phone. But yet again, XDA to the rescue. Searched it out and found the "ODIN to stock" thread. Just had to track down the right TAR and PIT files. I was orginally on KJ2 stock before I did anything, but I could only find the KD1 TAR. No biggie tho, just used the ODIN to stock method and I was back in business again.
Since I am far from having any real knowledge about roms and their internal workings and what-nots. I went about just trying to find roms that would run off of the Bali Kernal and the KD1 baseband. I did find working links to a few of them, not exactly sure how many, but I had serval choices. I went with GingerClone v.2.
Back to reboot, wipe factory, wipe cache, wipe dalvik. Install from SDcard, chose GingerClone and installed. Booted up and everyhting was all hunky dory again. Ran that rom for a few days. And yes it was a really nice rom, and it was faster than stock. It just was quicte what I was looking for.
Back to looking for ROM files, seeing which links were still good and trying to figure out which one I thought would work best for me. Tried TouchMIUIwiz v3, and again very good rom, but still not quite right. Decided to spend a whole day just comparing roms that would work with Bali and KD1. There are only a few roms that are made with KD1. So I wanted to go back to KJ2. I was thinking the only way I could do that was if I wiped again and the hooked up to Kios (or whatever it is called), But no, I found a working like to a KJ2 file. After another set of wiping in recovery, then Flashed the KJ2, then Flashed Nexus CM. Been messing with in for fwe days, and have to say I really really like this one. It has been smooth as glass and quick as a rabbit. I am thinking as long as I dont run into any major problems or bugs with it, this wil be my daily driver.
But I do have a question, since most of you have been here for awhile, and have been able to try out alot of these roms when they were new. Whick rom, in your own opinion, would make web surfing fast and smooth, and also works awesome with facebook? have already rooted and unlocked my husbands SK4G, but he surfs the web and does his facebooking from his SK, and it loves to freeze up and lag out when using both of those things.
Now that I am at the bottom with this, very sorry if my post seemed to long or anything else. Thanks in advance!
That's quite the story there. Crazy to believe it still works.
As for the ROM question, really all of the ROMS for SK4G are outdated. Due to software available. The only ROMS that I would say are up to snuff now are the neXus GB and JB ROMS by RicAndroid. They are chock full of tweaks and scripts. But keep in mind, you're not going to be on the actual newer Android versions. So it may run better, and it may be faster, but only so much.
Hope this helps
Zydrate_blue said:
That's quite the story there. Crazy to believe it still works.
As for the ROM question, really all of the ROMS for SK4G are outdated. Due to software available. The only ROMS that I would say are up to snuff now are the neXus GB and JB ROMS by RicAndroid. They are chock full of tweaks and scripts. But keep in mind, you're not going to be on the actual newer Android versions. So it may run better, and it may be faster, but only so much.
Hope this helps
Click to expand...
Click to collapse
I was pleasantly surprised when it turned out to be just a battery issue.
Thanks for the answer on the roms. I realized that these are older roms now, and its not the most crrrent version of android and all that, and I am totally fine with it. I am just looking for something that is better, smoother and faster than the stock stuff on the phone, for my husband. He still uses his SK4G as well. In fact I dont think I could get him to upgrade to a new smartphone phone/ android device anyways. So I was just looking for something to stop his constant frezzing issue while he is web surfing and things like that. You were very helpful tho, so thanks a bunch.
I agree with Zydrate_Blue; the Nexus JB ROM is about as good as it gets with this phone.
Thanks guys! I will have to d/l and flash it.
CupCakeBombardme said:
Thanks guys! I will have to d/l and flash it.
Click to expand...
Click to collapse
For a smoother internet interface. Get yourself NakedBrowser. They've got a free version that works just lovely. I haven't tried the paid version myself, but if may very well be worth it for someone who uses it a lot!