Related
Well I just got my At&t Fuze like 3-4 days ago. For some reason it randomly loses connection to the network, so I can make call or use the internet. I'll have to go back to setting- communication to turn off my phone turn it back on then turn on the data connection. I'm really tiring of it happening over and over again. Does anyone else have this problem? And are there any ways to fix it? Thanks
No one has any idea??
Are you still running the stock ROM? If so, GET RID OF IT!!!!
In all seriousness: Have you installed any applications? Have you modified TouchFLO 3D? You can always try a hard reset and see if the problem persists.
It's possibly a problem with AT&T's network. I've noticed that my 3G speeds are incredibly slow lately and others on hofo have had this issue as well. I would advise you to wait it out.
forp me it says i get 3g,edge, or G and i will cant connect sometimes.
I also have this issue. Sometimes it happens after a soft reset or for no reason at all. It is easy to fix as i just turn data back on but I don't know why it is happening.
I actually tried a hard reset reset and it didn't work so then I brought it back to At&t and the guy there fixed it for me. He said it was because the data connection was off so then I thought maybe I accidentally turned it off, but the problem persist after.
Yes, I am still running under stock rom, I installed google map, beejive, and some other that I don't think will cause this problem. I am afraid to flash because I already have a lot of contact info set in and data and would have to re-do everything.
I was hoping maybe someone would have a solution for this. I don't think running on stock rom would cause this.....
Any help would be great. Thanks
I just flash it to NATF's rom and it's working really well right now. I hope the problem will not appear again. Again thanks for the rom NATF
I now get it often that there is a problem with the GPRS in your area. Also there are times that the phone is not even connected. It is getting to be a pain but will try calling AT&T and find out
Even after installing a new rom the problem still continue. I tried going into an At&t store and ask, but they have no clue. I don't have time to call 611 right now, but will update with what they say when I do. It starts to get really annoying....
Fuze_tactic said:
I actually tried a hard reset reset and it didn't work so then I brought it back to At&t and the guy there fixed it for me. He said it was because the data connection was off so then I thought maybe I accidentally turned it off, but the problem persist after.
Yes, I am still running under stock rom, I installed google map, beejive, and some other that I don't think will cause this problem. I am afraid to flash because I already have a lot of contact info set in and data and would have to re-do everything.
I was hoping maybe someone would have a solution for this. I don't think running on stock rom would cause this.....
Any help would be great. Thanks
Click to expand...
Click to collapse
It's probably a network issue.
Regarding flashing, I suggest you back up your contacts with outlook. Even if the problem has nothing to do with software, you're missing out quite a bit in terms of speed. Besides, you should back up your contacts regardless. Don't trust windows mobile too much
OK, sounds like I'm not the only one experiencing this problem. I think the only thing that's different for me is that when I lose the data connection, I also lose voice. The first time it happened, it said my SIM was unprovisioned. When I called customer service, they didn't know beyond checking for network outages in my area.
Fuze_tactic & Tribalmunky
I thing both of your problems -- intermittently dropping the data connection for Fuze_tactic, and intermittently dropping the voice and data connection for Tribalmunky -- could be caused by the Long Press End button setting. Go to Start/Settings/System/LongPressEndKey to see what I'm talking about. There is one setting for Airplane mode, which would kill voice and data, and another for killing just the data connection. Try changing the long end key press to Set Vibrate/Ringer and see if that cures your issue(s). If you are occasionally long pressing the end key, your should develop a problem with intermittently losing your ringer.
pcortes said:
Fuze_tactic & Tribalmunky
I thing both of your problems -- intermittently dropping the data connection for Fuze_tactic, and intermittently dropping the voice and data connection for Tribalmunky -- could be caused by the Long Press End button setting. Go to Start/Settings/System/LongPressEndKey to see what I'm talking about. There is one setting for Airplane mode, which would kill voice and data, and another for killing just the data connection. Try changing the long end key press to Set Vibrate/Ringer and see if that cures your issue(s). If you are occasionally long pressing the end key, your should develop a problem with intermittently losing your ringer.
Click to expand...
Click to collapse
No, I've checked that. It happened once when it was just charging, no where near my hands or anything that could have pressed it. When it happens I can't make calls or reestablish data connections until I either go in the connections manager or soft reset.
pcortes said:
Fuze_tactic & Tribalmunky
I thing both of your problems -- intermittently dropping the data connection for Fuze_tactic, and intermittently dropping the voice and data connection for Tribalmunky -- could be caused by the Long Press End button setting. Go to Start/Settings/System/LongPressEndKey to see what I'm talking about. There is one setting for Airplane mode, which would kill voice and data, and another for killing just the data connection. Try changing the long end key press to Set Vibrate/Ringer and see if that cures your issue(s). If you are occasionally long pressing the end key, your should develop a problem with intermittently losing your ringer.
Click to expand...
Click to collapse
Like tribalmunky said we were no where near the phone when it happens, but I follow your instruction and changed the long pressed key. I'll see if anything occurs. Thanks for the input tho.
Update:
I called At&t and from what tech support told is, their network is having problems, especially for users in Cali. They are in progress of fixing it, but no idea how long it is going to take. I guess the only thing we can do now is wait.
Fuze_tactic said:
Update:
I called At&t and from what tech support told is, their network is having problems, especially for users in Cali. They are in progress of fixing it, but no idea how long it is going to take. I guess the only thing we can do now is wait.
Click to expand...
Click to collapse
I've been having problems with this too (losing data and phone) and I'm in Seattle. Maybe if I call, AT&T will claim there are problems with the entire west coast.
I did the whole SPL and ROM flashing thing (ROMeOS) and the problem still persists. I chatted online with an AT&T guy and he said it was a known issue but no way to fix it yet.
If you're worried about your contacts, don't be. Use PPCPimBackup (I think I got it either here or at freewarepocketpc.net) and it can copy all of your contacts onto the storage card. It's free and I've used it prior to flashing a new ROM.
However, flashing ROMs do not work. The only fix is simply going to your communications settings, turning off Data, then turning it right back on. This will also be why some of your MMS pictures don't get sent out.
I still love this phone, just get annoyed with it at times. Even the available larger battery with cover only makes my phone last about two days opposed to one.
In NJ
sbreen said:
I've been having problems with this too (losing data and phone) and I'm in Seattle. Maybe if I call, AT&T will claim there are problems with the entire west coast.
Click to expand...
Click to collapse
I am in NJ and have the same problem. It started about the time I loaded some screen lock software that requires a finger swipe to unlock the touch screen (navigation buttons always active) upon coming out of sleep mode. I just decided to live with it, I like the software. I merely click the data connection in settings, connections, data connection (it may indicate off or on, doesn't matter, it is actually off) and then click it on and everything works again. Mostly happens after charging overnight.
I have stock fuze and it keeps happening to me too. But whenever I reset my phone, I can connect to the internet. I don't think it's network related in my case. not sure though.
I've been having an issue with my Sprint Touch (Vogue) the past few weeks where I have high signal strength, but the data connection will not open. That is, if I try to open a program like Opera I'll get a notification bubble that says "A data connection cannot be opened for an unknown reason...."
I've found two ways to work around this. One is to soft reset the phone. More recently, I've discovered that all I need to do is toggle the radio off and then back on again, and it connects instantly.
This seems to happen at random times and prevents programs like my weather app from automatically connecting when necessary for updates.
Hard reset and restoring from backup has not solved the problem. Has anyone else experienced a problem like this, or heard of a solution?
trying replacing your radio ROM
go to the Vogue section and look for other Radio ROMs. you can read which ones are better.. and then flash the one you see fit.
I've had my Touch Pro2 for almost a week...and still no data connection. Been working with technical support (phone) but haven't gotten anywhere. Multiple reps swear there isn't anything wrong with my plan, and the switch should have gone over to the new phone (Was on a Mogul before). Voice and SMS work fine. The folks have stepped me through a few profile updates...and I've tried driving around t see if other towers would work (?? - don't even know if that would work...but the CS rep suggested it) to no avail. Anyone have this problem before when switching out to new devices and have a suggestion for advanced troubleshooting? Thanks.
Since data isn't working, I've been using WiFi in my house. Never really tried using it extensively before an a WM device...and have been frustrated with having to frequently re-enter the WPA2-PSK AES key to my home network. Is this a known issue? Since it could be related to my Sprint Data connection constantly trying to initialize (wish I knew how to turn that off/stop it), I'm not even sure anyone else has seen the problem before. I won't care once the Sprint data finally comes online, but it sort of irks me. Any help/suggestion here would be appreciated as well
xenor said:
I've had my Touch Pro2 for almost a week...and still no data connection. Been working with technical support (phone) but haven't gotten anywhere. Multiple reps swear there isn't anything wrong with my plan, and the switch should have gone over to the new phone (Was on a Mogul before). Voice and SMS work fine.
Click to expand...
Click to collapse
You've tried CS, and you've tried multiple towers, I believe I would demand a new device, at this point. See if switching devices fixes the issue. This is not normal.
With the new device try running it and verifying that it can connect, before installing any new programs, or making any changes first.
New Device it is
New device came today..works fine. Wonder what may have caused the problem in the first phone? I'm happier now
Any thoughts on the dropped/forgotten Wifi password? Should WM store the network key, or does it not store for WPA2-PSK AES?
Thanks for the response dah54
We should switch this into two separate topics, I am also having the key drop issue however my data works fine
My network is WPA-PSK
Fine with me. Since mine was possibly a hardware error and a new phone resolved the EVDO data connection problem, I'm happy to have it changed (I cannot edit my original post title, so I think its in the hands of the moderators.
Bumping this up to the top. I just started playing with my TP2 (sprint) tonight and it keeps dropping my network key as well.
Verizon Users Getting Stuck in 1X --- PLEASE READ!
For those of you who have the plaguing problem of your data connection dropping to 1X, I'm trying to spearhead this issue with Verizon and need your help.
Everytime I open a ticket, it get's closed stating that it's a signal issue with a specific location. We all know that this is not the case. I finally have got ahold of a Tech supervisor who gave me all of his contact information so that we could ALL direct our issue to him. He would then get it elevated through the proper channels and then hopfully they can find a fix. It's my hope that we can all email or call him and explain our issue. He was very nice to work with on the phone and said he is dedicated to getting the problem resolved. I think he's looking at this from a global look rather than an isolated one like every other tech I've spoken to.
Here is his contact information:
Kevin Drakeford
[email protected]
843-566-8600 EXT 1789
Charleston, SC Call Center
Please email or call him with your information and make sure to inform him all of the steps that you've tried that have been unsuccessful (new phone, hard reset, etc etc).
I will try and follow up with him later in the week. Msg here if you contacted him. Hopefully we can get this fixed and be left with just an awesome working phone!
I emailed the guy, it happened once a week when I was on the VZN rom.
dezoris, what rom are you using now? does it not get stuck in 1x?
just curious...
I had this problem on stock VZN ROM and still have it on MightyMike ROM...
Sent Kevin a message
I sent him one!
I haven't had my phone 2 months & this is pissing me off!
I have also had a complete loss of data connection period! Grrrrr
After doing the *228 & option 2 to sync with tower. Got WORSE!
gbruyn said:
Verizon Users Getting Stuck in 1X --- PLEASE READ!
For those of you who have the plaguing problem of your data connection dropping to 1X, I'm trying to spearhead this issue with Verizon and need your help.
Everytime I open a ticket, it get's closed stating that it's a signal issue with a specific location. We all know that this is not the case. I finally have got ahold of a Tech supervisor who gave me all of his contact information so that we could ALL direct our issue to him. He would then get it elevated through the proper channels and then hopfully they can find a fix. It's my hope that we can all email or call him and explain our issue. He was very nice to work with on the phone and said he is dedicated to getting the problem resolved. I think he's looking at this from a global look rather than an isolated one like every other tech I've spoken to.
Here is his contact information:
Kevin Drakeford
[email protected]
843-566-8600 EXT 1789
Charleston, SC Call Center
Please email or call him with your information and make sure to inform him all of the steps that you've tried that have been unsuccessful (new phone, hard reset, etc etc).
I will try and follow up with him later in the week. Msg here if you contacted him. Hopefully we can get this fixed and be left with just an awesome working phone!
Click to expand...
Click to collapse
I haven't had any problems like that with my Verizon Touch Pro 2, that goes for the stock Verizon ROM and the MightyMike one I'm currently using.
This has happened to me a couple of times. It is VERY annoying. and i KNOW it's not a signal issue. What kind of "debugging" should i do before i email the vzw manager guy? I don't want to send an email without doing a little debugging work. That way i seem like i know what i'm talking about.
PS. i agree, this is probably not an isolated issue.
I work at a large international airport in a metro area. It goes without saying there is a ton of cell capacity in the area.
Yet I continually drop to 1X when on a data connection. I always thought this was just "one of those things" or something to be expected. You are saying it is not but a bug in the product/ software / rom, etc?
Happens to be about once every other day. And I just soft reset and it goes back to normal.... Sucks I know.
Just stumbled on this thread and thought I would comment -- my TP2 is actually on Sprint and not VZW, but I've seen this problem fairly frequently even going back to my old Mogul/Titan, so it seems to be a legacy CDMA issue. I think there are two kinds of problems, though, so I am curious to know more about what people are experiencing.
First, as you know, incoming calls or SMS must drop the phone from EVDO to 1X -- this isn't usually a problem because it should snap right back to EVDO after the 1X packets are done. However, I have seen many occasions where it "sticks" on 1X *as long as the phone is still trying to transfer data* -- such as Exchange push or streaming Internet radio. If the phone keeps trying to access the data connection, it will stay in 1X indefinitely most of the time. If the data connection goes dormant for more than about 20 seconds, it seems to finally revert back to EVDO.
The other circumstance is where it seems to just drop to 1X and stay there, and not even cycling the radio on/off seems to make a difference -- you have to soft reset.
I guess what I am wanting to drill into is how many instances are of the first time and how many are of the second. It did take me a while to realize, for example, that if I got an SMS while listening to streaming radio, the data connection was going to drop to 1X and stay there until I closed the streaming radio app. Similarly, I often get as many as 2-3 emails a minute during peak times of the day (I know, my company needs to take some valium), so the constant Exchange syncs never give the data connection a long enough "break" to get back up to EVDO. The main point is, the first type of problem is more or less a CDMA protocol issue that we're probably stuck with, while the second type seems to be a definite bug with either the radio or the OS.
I notice the issue too, but worse it will go into and endless loop of popups letting me know of the situation and the only way to make them go away is to soft reset. Dismissing the popup just makes it come back again over and over. Calling this a legacy CDMA issue is bull as none of my other phones or Blackberries, even my piece of junk Storm have ever done this. Windows mobile needs to give us a decent radio to fix this. The only Verizon EVDO capable Winmobile device I have had that did not have this problem was the XV6700 so this has to be something to do with more recent devices. It has happened on HTC and Samsung devices, so it can't be manufacturer specific. It is the primary reason I moved most of my lines over to Blackberry. I got my wife one of those new Android phones, 1st the HTC one and when she decided she wanted a keyboard, the Moto one and neither one does this.
1x stuck
Same issues as everyone else here to.
i have found when i go to start/settings/connections and launch the comm manager, do do anything just launch it it corrects the issue.
thats strange but it has worked everytime for me.
Everyone whose having this issue on Verizon. Please please please email Kevin on post #1. Having one person as the sole contact on this issue WILL help get it worked out through Verizon. Kevin was very helpful and is a Tech Support Supervisor. Thanks!
Ok verified work around that works for me I'm on day 4 and im still on a EVDO connection.
1. Com manager
2. Press 3G connection and set your network type to auto.
3. dont press ok.
4. Press the X in the top right corner.
5. Soft reset.
So far this method has "fixed" my issue as of 4 days ago. Previously I would go 1 or 2 days before seeing the issue again.
jbruce75 said:
Ok verified work around that works for me I'm on day 4 and im still on a EVDO connection.
1. Com manager
2. Press 3G connection and set your network type to auto.
3. dont press ok.
4. Press the X in the top right corner.
5. Soft reset.
So far this method has "fixed" my issue as of 4 days ago. Previously I would go 1 or 2 days before seeing the issue again.
Click to expand...
Click to collapse
I can't seem to find "3g Connection" as an option or setting under the com mananger. Am I looking in the wrong place? Which OS/ROM are you running?
I am on stock Verizon WinMo 6.1. Thanks for any help.
Sorry your right. Im running the CDMA energy rom. Yours should be stated as Data connection.
You should really consider upgrading your rom. I held out for a long time and just gave in.
I'm actually on verizon with tp2, Verizon is well aware of this issue(as far as i;m concerned). When I put on a custom rom, it showed up, however I needed to put back the default rom from verizon it went away. I put the energy rom back on and it's back. If verizon knows how to ship phones with that annoyance turned off can't we get a fix for the popups?
That pop up is most annoying!
Techitrucker said:
I notice the issue too, but worse it will go into and endless loop of popups letting me know of the situation and the only way to make them go away is to soft reset. Dismissing the popup just makes it come back again over and over. Calling this a legacy CDMA issue is bull as none of my other phones or Blackberries, even my piece of junk Storm have ever done this. Windows mobile needs to give us a decent radio to fix this. The only Verizon EVDO capable Winmobile device I have had that did not have this problem was the XV6700 so this has to be something to do with more recent devices. It has happened on HTC and Samsung devices, so it can't be manufacturer specific. It is the primary reason I moved most of my lines over to Blackberry. I got my wife one of those new Android phones, 1st the HTC one and when she decided she wanted a keyboard, the Moto one and neither one does this.
Click to expand...
Click to collapse
Posible fix for stuck in 1x!
I'm going to go out on a limb here.
I posted in a coupl eother places and got no response on this which was original phone settings before I flashed
Same normal Phone settings for #777
BUT, the other read as follows:
VZWEmbedded
Log on: emsgsm.vzw3g.com
Pass: vzw (I tried our regular password & it worked)
In networking don't select on setup ie just your #777, set it to auto.
Here's my point:
No longer receiving multiple popups for: your device is registering on a voice line
More bars Show up now
Stay in 3g longer and now the phone calls up 3g for when data needs processing and data connection goes live as it should at this point.
Was using engery rom's nov 9 stable, worked with this switch
Now using Energys 6.5.3 28002 rom & working even better.
Running the same radio that came with phone version 1.88.
While i will drop periodically to 1x it does recover on it's own and isn't staying stuck.
Don't want to even look at 1x, update weather lol it works. So I am not to sure it's a hardware issue per say (maybe both who knows) since I have gotten rid of my popups. I'm not a programmer but sounds like a programming issue since it needs the 2nd set of connection strings.
What won't fix the issue is if you are in a bad area with very poor reception. I'm in the middle of a oak grove forest at the bottom of a hill and this is working for me.
Make sure you keep the 3g push in setting on and set to auto
Give ity a try!
Any thoughts on this?
oK AFTER much confusion on ppcgeeks, I need to calrify a few things.
This is a 2nd connection that you need to add.
The GSM is data, normally phone operates in cdma but it is making use of the gsm when over seas for email. It also uses gsm locally for data.
Since adding the 2nd connection all popups are gone. data connections are better on new rom then on stock rom.
If you've made use of JMZ Provisioing you already have the 1st connection under My ISP. Just add the 2nd as noted above and under select network make sure it is set to auto. This allows verizon to switch as needed.
This has been happening to me for about the past 2 weeks. I just e-mailed Kevin. I plan to take it to our on campus Verizon store next week.
I am running a stock ROM with SPB Powershell 3.5 on top of it. EVDO comes can goes. Usually once I try to use an app that requires data (Pocketwit, Opera or even ActiveSync) it drops me to 1X and never connects. I have also gotten several PPP (error code 11) errors. Before this time, the phone had been rock solid with EVDO.
Now my ActiveSync wont even work when I am at home. It only works at work due to being plugged in via USB.
Hope Kevin can help us get to the bottom of it.
I was stuck in 1X for the last few days. My problem was resolved by dialing *228 and pressing '1' to program.
Hi all,
Got no answer at general Q&A forum so I'm trying it here.
I'm facing the problem with both phones (Asus 4 Max/ZC554KL and Samsung A10s/A107F). The signal is full, shows 4G, even the arrows, BTSs all around (almost the city centre) but the data connection keeps disconnecting. As long as there's a data transfer (downloads, online radio), it works, once it stops, the connection dies too, still showing 4G/data transfer arrows though. Switching the data off/on doesn't help, the flight mode on/off has to be used to restore the connection. Doing this everytime you touch the phone is kinda....tiring, not mentioning you're getting no messages/notifications till you do it. The sim cards are both quite new (t-mobile cz and kaktus (local lowcost t-m brand)), so it shouldn't be the problem, I was thinking about the problem with contacts to the antennas in back covers as both phones were open few times (was changing the charging connectors due to the slight water damage) but wasn't able to find out if the 4G/GSM antennas are in the cover in case of these phones. The carriers keep saying all is fine from the network part. Both phones were bought new in Asia, being used in CZ now but have all local LTE bands. Asus performs a tiny bit better (in terms of reception) so I decided to dig into the software options. The factory reset didn't help and I realised the phone is still in its original state from the time I bought it (03/19) and offered me zero updates. Even now it doesn't. Tried to download it manually from the Asus website but it always says "error" during the installation and stops it. So I decided to find another way to get it in. Don't want to risk Chinese one-click apps, so I chose Magisk which should allow manual updates with no risk. The collateral problem arose, as the volume keys do not work, so I tried to put it into the recovery mode through ADB. My old computer sadly only has Windows Vista OS and keeps telling me errors whenever I try to perform any ADB commands. Therefore I'm asking you here for help with the following questions:
1. is there any software allowing to put ZC554KL into the recovery mode through Windows Vista?
2. if not, any other way to push any actual ROM version into it? (There's still 7.1.1 from the factory).
3. if not, any other way to get there Magisk?
4. if not, any safe rooting app, not requiring the recovery mode? (Well, I don't need to get controlled by the Chinese comrades)
5. overall, any other possibilities to solve this data problem/keep the data connection working? (I could leave the online radio on (silently) but the battery gets drained quickly and I won't have unlimited data forever )
6. anyone knows where the LTE/WiFi antennas are in these two phones? As Asus has better 4G but significantly worse WiFi reception.
I've heard you're the #1 experts here, so hopefully we'll be able to solve this. If there's any information missing in the problem description, I'm ready to provide it.
Thanks a lot for any help