[Help] Display problem during CM7 installation. - Captivate General

I am trying to install CM7 on the new cappy I just got as a replacement from AT&T. I did a 1-click back to stock and start following the instruction till I got to the point that I have to boot into recovery after flash the CM7 initial kernel.
The screen went blank after the AT&T boot logo, and the 4 led key on the bottom is lit up. It seems it might be working as i press the power key after the AT&T logo is gone it will do a reboot now. But when i use volumn to move the down the selection and press the power button it does nothing.
I followed the exact same procedure on my old cappy, and it worked like a charm and successfully installed the CM7....
Wonder if anyone has similar experience, or is there certain model cappy has different display or something. both cappy are from batch 1007.
Thanks in advance.
If this is the wrong section to post question, please delete it ;o

I had that happen. Forgot what I did to fix it exactly.. I remember using odin to go back to JH7, then flashed Cog 4.1. Then from Cog 4.1 to CM7, only to find out I didn't really like it.

There's a CM7 sticky in Q&A subforum and this is a double post.

Thread closed.

Related

[Q] G2x stuck at LG logo/cannot access recovery

Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..
schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.
Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.
I just joined your club. Wow this sucks.
So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?
I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App
Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?
have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331
same problem..... anybody find something to fix this yet?
From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X
Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.
Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.

[Q] Flashed to S7 and stuck on "S7" screen - not loading

Hey guys, so I flashed to S7 from Infused an hour ago through CWM red screen and now it's stuck on the Serendipity VIII screen and it has been for the last 45 minutes.
I cleared cache and deleted all previous settings and flashed to S7 and it said it was successful. I chose "reboot now" and now it's stuck. I can't get back into the red screen by holding the volume/power buttons and when I try to hold just the power button down, it just restarts and gets back to that screen.
Is there anyway to fix this??? This sucks.
Try Holding the Volume up/down longer. Power it off....then hold them for around 15 seconds.
No go. Just goes straight to the "Serendipity VII" screen.
I've pulled the battery and tried it several times but it goes to the Rogers startup screen then right to that S7 screen...
then you will have to put it into download mode and use the unbrick and start from scratch.
or use Odin to flash a GB kernel with CWM and you can reflash everything that way as well.
Am I able to run this http://forum.xda-developers.com/showthread.php?t=1092021
with root + 3e modded recovery to save me time from having to re-root?
EDIT: So I put it into download mode and used the above method and it worked well in Odin, but now it's stuck on the Samsung screen. What a headache. I'm wondering if it's because I didn't get the correct kernel that it was stuck on the S7 screen in the first place...
Looks like I have to try gtg's method later...
So I'm stuck.
I've used gtg's method and it finishes in Odin perfectly and it goes to reboot but still stays at the SAMSUNG screen now. No changes for 10+ minutes.
Any other suggestions? I'm just about to pull my hair out.
hoanger said:
So I'm stuck.
I've used gtg's method and it finishes in Odin perfectly and it goes to reboot but still stays at the SAMSUNG screen now. No changes for 10+ minutes.
Any other suggestions? I'm just about to pull my hair out.
Click to expand...
Click to collapse
Is this a Rogers infuse, or AT&T?
i believe there is a S7 help forum. may want to see if someone has had the same problem and if there is a solution there.
Thanks guys!
I finally solved it. Solution - just in case anyone else runs into a similar problem.
Rogers and AT&T infuses are different. If you have a Rogers Infuse and try to use GTG's ultimate unbrick - it will not work. Not only will it not let you boot up, but it gives you a fabulous new AT&T splash screen as well. Luckily, GTG had also developed an unbrick with the stock Rogers rom for Rogers Infuse owners to use which is kind of buried in the forums that take some time searching for.
Once you get THAT file, you can use Odin and unbrick from there. No problems after that. The other great thing about it was that it's an already rooted rom. Instead of taking the chance again of trying to flash S7 on it, I just went ahead and flashed Infused instead all over again since i had less than 24 hours with it.
Hope that helps anyone in the future.

[Q] Can't get blue recovery screen to load up

I have been running on the gb 2.3.3 rom (rooted) that I have flashed using odin back in summer and now decided to do some more upgrading . So I found a new rom that was very intriguing to me: http://forum.xda-developers.com/showthread.php?t=1305145 After doing some research I realized I needed to do a different type of flashing (cwm?), and not through odin. So I downloaded root explorer into my phone and followed the procedures in this forum: http://forum.xda-developers.com/showthread.php?t=1122508 but every time I try to put my phone in the recovery mode (holding volume up + down + power) it wouldn't go into the blue screen. Instead, it would just restart, and restart, etc.. Any suggestions? Do I need to do something with the kernels?
p.s.hahah after messing around and looking through forums all day, I got a little impatient and flashed gb 2.3.6 using odin in the mean time
calvzzz said:
I have been running on the gb 2.3.3 rom (rooted) that I have flashed using odin back in summer and now decided to do some more upgrading . So I found a new rom that was very intriguing to me: http://forum.xda-developers.com/showthread.php?t=1305145 After doing some research I realized I needed to do a different type of flashing (cwm?), and not through odin. So I downloaded root explorer into my phone and followed the procedures in this forum: http://forum.xda-developers.com/showthread.php?t=1122508 but every time I try to put my phone in the recovery mode (holding volume up + down + power) it wouldn't go into the blue screen. Instead, it would just restart, and restart, etc.. Any suggestions? Do I need to do something with the kernels?
p.s.hahah after messing around and looking through forums all day, I got a little impatient and flashed gb 2.3.6 using odin in the mean time
Click to expand...
Click to collapse
Try this.
Basically do what youre doing but instead of keeping on holding to it, hold on to Volup+voldown+power for 2 reboots, then on the 3rd reboot, the gs4g screen in the beginning lights up a slight lighter than usual. Let go of the power button, See if this works.
Sent from my SGH-T959V using XDA Premium App
Alright! I can get into the recovery screen. But this is with the 2.3.6 gb rom. The problem now is that I don't know how to root it. The forum tells me to go here http://forum.xda-developers.com/showthread.php?p=16160325 but I don't know which one to dl and flash. Would any of them work?
calvzzz said:
Alright! I can get into the recovery screen. But this is with the 2.3.6 gb rom. The problem now is that I don't know how to root it. The forum tells me to go here http://forum.xda-developers.com/showthread.php?p=16160325 but I don't know which one to dl and flash. Would any of them work?
Click to expand...
Click to collapse
Download the Odin KJ1 version.
Just making a quick check. You ARE using a galaxy s 4g right? if so, then from that link, download the kg4.tar from the odin section. Then flash via odin. .
-edit.- listen to fbis. Hes more experianced than me.
I personally used the kg4. cause that was all there was back then. Ahaha. Glw flashing
Sent from my SGH-T959V using XDA Premium App
WOOOO got it to work!!! thanks again for all the help!!!! hahah I would've just sat around playing with my phone all night if it weren't for the help
.
Sent from my SGH-T959V using XDA Premium App
Hi I have the same problem but I still cant get into recovery, I go straight into Download mode. Please Help
It might be because your phone is connected to the computer? If so, try disconnecting it
No its not that, I can access it without it being connected to a computer.http://forum.xda-developers.com/showthread.php?t=1183413
This thread says the original GB rom changed the key mapping. Any ideas on where I can find a fix. I think thats what happened to me.
hmm I'm still relativley new to this kind of stuff as well, so the only route I know that you can do that will most likley fix the problem is to odin to a newer rom, perhaps the one I have linked above, then odin the kernal as well to get it rooted and follow the guide on how to do it if you're confused. Then turn off your phone, hold (volume up + volume down + power), screen should boot up then dissapear, boot up again, then disappear, and on the third boot up, just release the power button but continue holding on to the volume up + volume down buttons and just wait. The cwm screen should come up from what I experienced on two different sgs4g's. Hope that helps somewhat lol. I'm sure there might be a easier way to just fix the key mapping but I'm not to sure on how to do it. gl
I just verified that method works for me as well. I'm lazy, though, and downloaded Quick Boot from the app store as it lets you boot into recovery or download mode. Less fuss.

Clockwork Recovery Won't Boot

Ok, so I did my first root last night with my G2x and flashed CM7 onto it using the instructions here for GB. The process didn't seem to go through at first because it kind of froze for awhile, but when I took out the battery and put it back in it loaded up. (I understand I may have made a mistake here.)
I thought all was good but then I tried to boot up Clockwork recovery to flash the GAPPs zip and everytime I tried it wouldn't go through the screens it is supposed to.
I'd hold the down volume and power buttons and the first LG (white) would show. Then it would bring up a cyan colored horizontal loading bar under the LG. I continue to hold the buttons hoping to see the cyan LG but then screen changes to a box with an orange arrow pointing to an android logo. There is a loading bar under this as well. If I let go here it loads up CM7 but if I continue holding on it takes me to the S/W screen.
I've tried this multiple times but I've kinda given up. I even tried individually installing the apks from the GAPPS zip but only a few of them successfully installed.
At a loss .Please let me know what I can do.
Let me guess. You flashed CWM via ROM manager?
Follow he guide here and let us know how it goes:
http://forum.xda-developers.com/showthread.php?t=1056847
Also, before you install the ROM use the wipe tool in my sig.
I appreciate the response but I did use that thread to flash it.
ae2012 said:
Ok, so I did my first root last night with my G2x and flashed CM7 onto it using the instructions here for GB. The process didn't seem to go through at first because it kind of froze for awhile, but when I took out the battery and put it back in it loaded up. (I understand I may have made a mistake here.)
I thought all was good but then I tried to boot up Clockwork recovery to flash the GAPPs zip and everytime I tried it wouldn't go through the screens it is supposed to.
I'd hold the down volume and power buttons and the first LG (white) would show. Then it would bring up a cyan colored horizontal loading bar under the LG. I continue to hold the buttons hoping to see the cyan LG but then screen changes to a box with an orange arrow pointing to an android logo. There is a loading bar under this as well. If I let go here it loads up CM7 but if I continue holding on it takes me to the S/W screen.
I've tried this multiple times but I've kinda given up. I even tried individually installing the apks from the GAPPS zip but only a few of them successfully installed.
At a loss .Please let me know what I can do.
Click to expand...
Click to collapse
When it get to the point where "the cyan colored horizontal loading bar" let go of the volume and power button and see if it boots into CWM.
Ok, I tried that and it went to that android logo screen again. Then it went to a black screen and then the cyan LG logo screen. From there it booted up CM7.
I just noticed when I try to boot into Clockwork it erases everything I added to it including contacts and apps I installed.
ae2012 said:
Ok, I tried that and it went to that android logo screen again. Then it went to a black screen and then the cyan LG logo screen. From there it booted up CM7.
I just noticed when I try to boot into Clockwork it erases everything I added to it including contacts and apps I installed.
Click to expand...
Click to collapse
Try rooting process all over again... just make sure battery have plenty of charge and make sure during any of the process there's no interruptions... let us know what happen after that...
Sent from my LG-P999 using xda premium
I will unroot and try again. A few questions though:
I'm reading and it looks like I need to be able to boot into CWR to be able to unroot...is using ROM Manager a safe alternative?
And also, while I followed the instructions for flashing through the thread you provided last time, I read that I may need to erase/wipe certain types of data before I do so to avoid the market problems. Can someone provide me information on that?
I just want to make sure I do this right a second time.
ae2012 said:
I will unroot and try again. A few questions though:
I'm reading and it looks like I need to be able to boot into CWR to be able to unroot...is using ROM Manager a safe alternative?
And also, while I followed the instructions for flashing through the thread you provided last time, I read that I may need to erase/wipe certain types of data before I do so to avoid the market problems. Can someone provide me information on that?
I just want to make sure I do this right a second time.
Click to expand...
Click to collapse
No need to unroot... as long as your computer still detect your phone... just flash everything again... I mean since you want to root... I would just do all the rooting process again... and reflash clock work... don't use rom manager to flash clockwork mod...
Or
And since you can't get into clockwork... you can just try flashing clockwork again... no rom manager
Sent from my LG-P999 using xda premium
Sweet, so I reflashed CWR and CM7 and I got my contacts back and several other minor issues were corrected.
I am experiencing a new problem now though. Whenever I try to download from the market it tells me "[App name] could not be downloaded due to an error."
What can be done to fix this?
ae2012 said:
Sweet, so I reflashed CWR and CM7 and I got my contacts back and several other minor issues were corrected.
I am experiencing a new problem now though. Whenever I try to download from the market it tells me "[App name] could not be downloaded due to an error."
What can be done to fix this?
Click to expand...
Click to collapse
Try flashing Google apps again. Cm7 doesn't include them in their builds.
Sent from my LG-P999
Worked like a charm. Thanks, yall are the best.
ae2012 said:
I will unroot and try again. A few questions though:
I'm reading and it looks like I need to be able to boot into CWR to be able to unroot...is using ROM Manager a safe alternative?
And also, while I followed the instructions for flashing through the thread you provided last time, I read that I may need to erase/wipe certain types of data before I do so to avoid the market problems. Can someone provide me information on that?
I just want to make sure I do this right a second time.
Click to expand...
Click to collapse
Rom Manager is not a safe alternative. Stay with Nvidia ClockworkMod.
Its should be a blue lg logo when you have to let go of the buttons.
Sent from my LG-P999 using xda premium
ae2012 said:
I will unroot and try again. A few questions though:
I'm reading and it looks like I need to be able to boot into CWR to be able to unroot...is using ROM Manager a safe alternative?
And also, while I followed the instructions for flashing through the thread you provided last time, I read that I may need to erase/wipe certain types of data before I do so to avoid the market problems. Can someone provide me information on that?
I just want to make sure I do this right a second time.
Click to expand...
Click to collapse
Every time before you re- flash a rom I would recommend doing a data/factory reset within clockwork recovery. then Wipe your cache. And then even a wipe of the dalvic cache under advanced settings. Then flash the rom then gapps. Then reboot. Its called doing a clean install. It just makes everything smoother when re- flashing. And if your apps ever not update like that again just fix the permissions in clockworkmod then reboot. It usually fixes it. And i don't recommend flashing directly from the rom manager. Do it from recovery instead. Hope this helps.:thumbup:
Sent from my LG-P999 using XDA
[edit]
Sent from my G2X.
Rocking stock CM 7.2.0-RC1
Similar issue, totally different outcome...
Ladies and Gentlemen (and low-lifes),
I have found myself in a similar situation, after recently flashing a ROM, to where I am now unable to boot into CW Recovery. The ROM flashed is working fine but when I attempt to boot into recovery I get a black screen and it never progresses beyond that. I have attempted to reflash of course via NVFlasher and from all indications it's been a successful flash. That said, the results remain the same... black screen.
FYI: I have not yet attempted to flash back to Stock Recovery.
•Current Rom - Owain's Domination v77 (a great ROM by the way)
•Current kernel - Harsh's 3.0.32
•Used Nullifier to prep device for ROM install (as I have been doing for sometime now)
If anyone has any experience w/this issue or any advice going forward I would greatly appreciate it.
UPDATE: (that was fast huh?) .................................................................................................................................................................................................
So I went ahead and flashed the Stock Recovery, tested and got access. I then flashed CWM 5.0.2.0 and to my delight was able to see the CWM console. I let go of the power and volume down buttons and the phone rebooted. Now the ROM will not boot, just sits in a forever cycle on the splash screen and the results continue to be the same as recently mentioned for attempting to get into the freshly flashed recovery.
dark ma++er said:
UPDATE: (that was fast huh?) .................................................................................................................................................................................................
So I went ahead and flashed the Stock Recovery, tested and got access. I then flashed CWM 5.0.2.0 and to my delight was able to see the CWM console. I let go of the power and volume down buttons and the phone rebooted. Now the ROM will not boot, just sits in a forever cycle on the splash screen and the results continue to be the same as recently mentioned for attempting to get into the freshly flashed recovery.
Click to expand...
Click to collapse
Ok, I will bring my concerns to an end now. I forced CWM to remain in play by not letting go of the power and vol. down buttons then using my thumb to see if I could stroll through options in CWM. Once I accessed a few it remain stable. I nullified and re-flashed my ROM and all seems ok in my personal corner of the universe. I am now able to boot into CWM without issue.

[Q] Rooted Froyo to Frozen Galaxy S 9I000 after a flash with SGS Kernel Flasher

I have like many, played with my Android for 2 years now. I have a bricked Infuse GB (finally toyed with it to its death last week), so I pulled out my old Froyo unrooted backup. I rooted with SuperOneClick - easy. I made some kernel tweaks in Rom Toolbox Pro, and also changed a few status bar icons. I did several reboots and all was running well. I did need to adjust some more tweaks but I saved those for my next big change, when I decided to.
...look into more of what I could do and downloaded the zip file for Voodoo Sound. I read that this could do wonders on my Froyo stock rom and was compatible - actually, I read fairly safe. So I can't say if this caused this or not. It could have been my lack of booting after each simple change, font, notification icons..etc. But I didn't do much more before I flashed Voodoo Sound
I downloaded SGS Kernal Flasher from the market, and when I flashed and it booted, I got the SAMSUNG screen. Then followed by a new black screen with GALAXY S GT-I9000 in white with Samsung logo on bottom. And it stays frozen. I cannot enter recovery mode or download mode to my knowledge - or should I say, experience.
Since this was my backup and what I was doing seemed relatively harmless Im a bit shocked. I loved that my font and icons were changing, something I couldn't do with my gingerbread infuse using rom toolbox pro.
So now I am stuck on a bootscreen I've never seen before, nor intended to flash if that is what happened. Was this flashing Voodoo Sound or was it my negligence with other? I just rooted this yesterday after getting too frustrated to fix the GB. I don't think I had but 4 apps downloaded and really left most of the build.prop stuff alone beyond some minor adjustments for battery life.
So I'm stuck on a boot screen with a phone model I am not familiar with, cannot get into download mode or into recovery mode. I had a TWRP Recovery zip file I never set up yet, never got CWM recovery working - regardless, I just started playing with it so I'm lost as I thought I could just wipe, reinstall packages and reboot fresh. I hate this to be my first post, but I usually find all the answers I need from you guys and I appreciate all the efforts you put into this site to help noobs like myself from creating disasters. I just didn't know what to do and if I'm not hard bricked, I don't want to end up that way.
I thought unrooting would work, but I can't get into the phone so it won't connect to the computer. Also, when plugged in, it shows a battery frozen at zero. I know it's probably charging but that must mean I messed up something that starts at boot. Anyone willing to help me resolve this issue and get me back on so I can make phone calls again - something I should probably stick too, haha. But sometimes, mistakes are the best teachers...so maybe I'll learn something easy from the pros here.
Well u have the wrong kernel flashed some how
I would try a different computer and go for the heimdall package to take phone back to stock.
As soon as you do get to download mode and I know it sucks with bad kernel flash I did before my self. Gotta just keep trying ..... If you got power u can get download mode.
For more information go to qkster thread ...
Sent from my SGH-I997 using xda app-developers app
Prometh1216 said:
Well u have the wrong kernel flashed some how
I would try a different computer and go for the heimdall package to take phone back to stock.
As soon as you do get to download mode and I know it sucks with bad kernel flash I did before my self. Gotta just keep trying ..... If you got power u can get download mode.
For more information go to qkster thread ...
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Thank you, I'll search that out. Well, I thought bricking was more potential, but if I can do a recovery on both that'd be great. I backed all up to laptop and gdrive before - and actually thought about leaving it "new". As my first root and tweaking, or "modding" out the GB was great. And I never picked Froyo back up, but I just wiped it and rooted it yesterday, and I only used it for a month when I got it (long story with phone provider and a dent on the side (but I have two Infuses,Froy and GB)
But I am going to stay away from flashing. That got the GB...but since you brought up the power option. I thought they were toast. If it takes me a few days to learn, I'd do it in a heart beat - they both have power and that means I can get them both working. The GB has a PC on left, Phone on right and a triangle in middle. I didn't read into fixing that - which I thought would be tougher than grabbing my other. Maybe I can get both working and get some more insight.
I appreciate it, and anyone else who inputs. I'll start reading into that other thread after dinner, cross your fingers for me. :fingers-crossed:
I cannot find the specific thread you were directing me to. But I was successful after many attempts to enter download mode. It is being recognized but unable to access the insides of my phone. If I click reboot from download mode (volume down), it boots to the stuck Samsung logo. If I push up, it's in download mode, but I have nothing to send commands to it as it's not being recognized beyond the Samsung USB composite.
Can someone direct me to where the thread may be about the frozen/stuck Samsung boot logo? Also, frozen 0% battery level but charged all night.
I'm trying to find something specific on this but it's difficult being an Infuse Froyo and I'm stuck on the Galaxy S GTI900 which was never there before my last reboot - obviously whatever I flashed was probably for the Galaxy S. I get SAMSUNG, then the Galaxy S screen...can't seem to get into recovery because it's too fast before stuck again.
Take out the battery, put it back in do not turn it on hit volume up and volume down plug in USB that's the download mode you are looking for
Sent from my GT-P3110 using xda app-developers app

Categories

Resources