I have been running on the gb 2.3.3 rom (rooted) that I have flashed using odin back in summer and now decided to do some more upgrading . So I found a new rom that was very intriguing to me: http://forum.xda-developers.com/showthread.php?t=1305145 After doing some research I realized I needed to do a different type of flashing (cwm?), and not through odin. So I downloaded root explorer into my phone and followed the procedures in this forum: http://forum.xda-developers.com/showthread.php?t=1122508 but every time I try to put my phone in the recovery mode (holding volume up + down + power) it wouldn't go into the blue screen. Instead, it would just restart, and restart, etc.. Any suggestions? Do I need to do something with the kernels?
p.s.hahah after messing around and looking through forums all day, I got a little impatient and flashed gb 2.3.6 using odin in the mean time
calvzzz said:
I have been running on the gb 2.3.3 rom (rooted) that I have flashed using odin back in summer and now decided to do some more upgrading . So I found a new rom that was very intriguing to me: http://forum.xda-developers.com/showthread.php?t=1305145 After doing some research I realized I needed to do a different type of flashing (cwm?), and not through odin. So I downloaded root explorer into my phone and followed the procedures in this forum: http://forum.xda-developers.com/showthread.php?t=1122508 but every time I try to put my phone in the recovery mode (holding volume up + down + power) it wouldn't go into the blue screen. Instead, it would just restart, and restart, etc.. Any suggestions? Do I need to do something with the kernels?
p.s.hahah after messing around and looking through forums all day, I got a little impatient and flashed gb 2.3.6 using odin in the mean time
Click to expand...
Click to collapse
Try this.
Basically do what youre doing but instead of keeping on holding to it, hold on to Volup+voldown+power for 2 reboots, then on the 3rd reboot, the gs4g screen in the beginning lights up a slight lighter than usual. Let go of the power button, See if this works.
Sent from my SGH-T959V using XDA Premium App
Alright! I can get into the recovery screen. But this is with the 2.3.6 gb rom. The problem now is that I don't know how to root it. The forum tells me to go here http://forum.xda-developers.com/showthread.php?p=16160325 but I don't know which one to dl and flash. Would any of them work?
calvzzz said:
Alright! I can get into the recovery screen. But this is with the 2.3.6 gb rom. The problem now is that I don't know how to root it. The forum tells me to go here http://forum.xda-developers.com/showthread.php?p=16160325 but I don't know which one to dl and flash. Would any of them work?
Click to expand...
Click to collapse
Download the Odin KJ1 version.
Just making a quick check. You ARE using a galaxy s 4g right? if so, then from that link, download the kg4.tar from the odin section. Then flash via odin. .
-edit.- listen to fbis. Hes more experianced than me.
I personally used the kg4. cause that was all there was back then. Ahaha. Glw flashing
Sent from my SGH-T959V using XDA Premium App
WOOOO got it to work!!! thanks again for all the help!!!! hahah I would've just sat around playing with my phone all night if it weren't for the help
.
Sent from my SGH-T959V using XDA Premium App
Hi I have the same problem but I still cant get into recovery, I go straight into Download mode. Please Help
It might be because your phone is connected to the computer? If so, try disconnecting it
No its not that, I can access it without it being connected to a computer.http://forum.xda-developers.com/showthread.php?t=1183413
This thread says the original GB rom changed the key mapping. Any ideas on where I can find a fix. I think thats what happened to me.
hmm I'm still relativley new to this kind of stuff as well, so the only route I know that you can do that will most likley fix the problem is to odin to a newer rom, perhaps the one I have linked above, then odin the kernal as well to get it rooted and follow the guide on how to do it if you're confused. Then turn off your phone, hold (volume up + volume down + power), screen should boot up then dissapear, boot up again, then disappear, and on the third boot up, just release the power button but continue holding on to the volume up + volume down buttons and just wait. The cwm screen should come up from what I experienced on two different sgs4g's. Hope that helps somewhat lol. I'm sure there might be a easier way to just fix the key mapping but I'm not to sure on how to do it. gl
I just verified that method works for me as well. I'm lazy, though, and downloaded Quick Boot from the app store as it lets you boot into recovery or download mode. Less fuss.
Related
So, I flashed the miui for infuse, works great. Ready to go back to infused and get ready for gingerbread. But, I try to reboot into recovery every possible way and I only get a 1/4 filled yellow bar and the android download splash above it. I need some help...Odin is not an option as I have no computer access.
Sent from my SGH-I997 using XDA App
i flashed back to cm7 from miui just fine. i held volume keys and power & booted into orange cwm & flashed from there. maybe you have an earler version of miui without recovery?..
from Sams inFuse... inFused GB
yabbb said:
So, I flashed the miui for infuse, works great. Ready to go back to infused and get ready for gingerbread. But, I try to reboot into recovery every possible way and I only get a 1/4 filled yellow bar and the android download splash above it. I need some help...Odin is not an option as I have no computer access.
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
Are you doing this when on a charger? It shouldn't be possible to enter download mode without a USB connection, the three-finger-salute should get you into recovery as always. MIUI is built on top of CM7 and uses LB's CM7 kernels.
Yeah, I finally got into recovery, I don't know what I was doing wrong.
It would boot loop when I held the buttons, but finally it just went through.
Thanks for replies.
How did u get miui for infuse....? Could u pm me the link please?
Sent from my SAMSUNG-SGH-I997 using XDA App
yabbb said:
Yeah, I finally got into recovery, I don't know what I was doing wrong.
It would boot loop when I held the buttons, but finally it just went through.
Thanks for replies.
Click to expand...
Click to collapse
The three-finger salute can be a bit finicky, but the following usually seems to work for me:
Pull/reinsert battery to ensure a "power-off" state.
Hold VolUp+VolDn. One finger for each - trying to hold both with my thumb fails for me a lot.
Hold power until the Samsung screen appears
Release power, keep holding VolUp+VolDn
Release VolUp/VolDn after 5-10 seconds
Ok i finally found out how to root and flash my SGS4G and after finishing everything the phone got into a rolling restart loop with a rainbow screen. Trying to use odin to return to stock but it doesn't stay on for more than 10secs so Odin cannot really do anything....
Help?
Can you get into download mode?
Sent from my SGH-T959V using XDA App
The rainbow screen means you flashed a gb ROM on froyo boot loaders. What ROM did you flash? Is Odin recognizing your phone?
Sent from my SGH-T959V using XDA App
Audiophile-ftw-newbuild. Odin sees my phone but the phone is restarting before i am able to do anything. I cannot get on download mode because i cannot see anything on my rainbow screen. Only a t-mobile logo at the beginning saying Galaxy S 4g
Here is the link for the ROM
http://forum.xda-developers.com/showthread.php?t=1214260
This is what i got for trying to work on it at 4am. I did not install the bootloaders for GB as you said. Anything that I can do to fix it?
Did you even try to get into download mode?
pull battery out then turn it on while pressing both volume buttons, and have USB connected. I don't remember exactly how to get into download mode, but try everything, then you Odin to a froyo ROM and start over.
Sent from my SGS4G using xda forum app
yes i did. I managed to make stop restarting, odin sees the phone on com3 and i am trying to flash it back to stock but Odin stacked on setupconnection for a while now (10mins)
Just to clarify a few things since i am new to this. (i flashed my vibrant with no issues many times before)
Where do i add the *.tar file in Odin? PDA-Phone-CSC?
I had that issue.. powered the phone and the computer off and on... plugged the phone in after Odin was up and went into download mode then it worked.
Sent from my SGH-T959V using XDA App
camalus said:
I had that issue.. powered the phone and the computer off and on... plugged the phone in after Odin was up and went into download mode then it worked.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Im on DL mode now finally but odin does not see my phone and the drivers failed to install on my pc. restarting pc now to retry
now im on the DL screen but Odin does not pick up my phone. Anyone has a link for the drivers of SGS4G to install them manually?
ok i manage to connect everything together and i am now in the recovery mode. whats next? please help!!!!
This is what you need to do:
http://forum.xda-developers.com/showthread.php?t=1223765
Once you get to step 11 you can flash Audiophile again (or any other GB ROM you wish). This will install the bootloaders you need and fix the "rainbow screen".
i managed to fix it and i got black_ice. I am on the "wait 10mins" part and then have to restart one more time. We will see what happens. If it doesn't work i will follow your steps
crematorio said:
i managed to fix it and i got black_ice. I am on the "wait 10mins" part and then have to restart one more time. We will see what happens. If it doesn't work i will follow your steps
Click to expand...
Click to collapse
Glad you got it working. Just make note of which roms are froyo 2.2 and which are gb 2.3. They require different boot loaders and the only way to change boot loaders is with Odin. I hate Odin because of the frustration when it freezes, stalls, or doesn't recognize the device. To each h his own though
Sent from my SGH-T959V using XDA App
ok i flashed black ice when it boots though there is an android logo on top of the t-mobile logo and the phone doesn't seemed to change anything.
I am currently running on KD1 baseband and v3.0 bali_sgs4g kernel what did i do wrong?
Did you read the black ice thread? The whole thing? That would be a good place to start. I don't recommend black ice for your first flash though, allot of people never got it to work or went through hell to make it work.
Sent from my SGH-T959V using XDA App
crematorio said:
ok i flashed black ice when it boots though there is an android logo on top of the t-mobile logo and the phone doesn't seemed to change anything.
I am currently running on KD1 baseband and v3.0 bali_sgs4g kernel what did i do wrong?
Click to expand...
Click to collapse
The andoid logo over the T-Mobile logo is normal from what I understand. I had that issue as well when I was on froyo.
If you are still experiencing other issues, I would suggest restoring a nandroid backup (if you have one) and starting over fresh: install a fresh kernel and ROM. If you want to stick with froyo, I suggest drhonk's Bali v3.3 kernel, and any of the froyo ROMs will be fine.
If you want to try GB, follow the link that I posted earlier to find FB's GB Starter Pack.
well i just reflashed again, im waiting for the phone to boot up..my issue was that the phone looked stock and couldn't find any themes or something to change it. i read the thread, i guess my question is the theme that i saw on the screen shots of black ice, does it come with it or not because im getting really confused with this thing lol
Axura was much easier on my vibrant....
So the only issue you have now is that the phone looks stock?
i followed your guide and i was able to flash it everything looks ok. thanks all for the help and special thanks to ultimakillz
Hey community.
Long time lurker, first time poster.
Anyhow, my brother bricked his infuse last night. Apparently he tried to flash an incompatible cwm fw (Nexus S) and rebooted it, and now its stuck at the samsung logo. Secondly, i tried to push it into download mode and it continues to loop. I tried to connect it to Odin and it does not recongize the phone, however it freezes at a picture of a wheel (similar to windows hourglass) and doesnt move from there.
i'm assuming its perm bricked at this point, unless you have suggestions.
Others have mentioned "jig" and "unbrickable mod" although I could not find any details further than the terms.
Any help would be appreciated.
Just checking, have you tried this?:
Remove the battery, and disconnect USB.
Hold, and continue to hold both volume keys.
Continue to hold vol. keys, connect USB.
Insert battery and continue to hold vol. keys for awhile.
That should put you in download mode.
Sent from my SGH-I997 using Tapatalk 2
After retrying with 4 different cables, 3 different machines, and 2 different O.S. I finally got the infuse to be found by odin.
Thanks for all the help
BaconTelevision said:
After retrying with 4 different cables, 3 different machines, and 2 different O.S. I finally got the infuse to be found by odin.
Thanks for all the help
Click to expand...
Click to collapse
Lol next time try heimdale. It for me anyways works first try all the time. I only use Odin when i have to, other then that i always use heimdale. Make sure when you use heimdale plug your phone into another port. Ive figured out that a usb port only recognizes the phone a certain way, as heimdale uses different drivers that you install. On my laptop i have two ports that i do not usually use (one is dedicated to a bluetooth dongle/mouse) so one is set up for odin, the other for heimdale.
Yeah heimdall is the way to go...don't even need drivers...it uses its own special drivers that it will download for you if you don't already have them
Heimdall never fails me...but Odin...well Odin is kinda iffy
Sent from my SGH-I997 using XDA
Heimdall unbricked me twice
Sent from my SAMSUNG-SGH-I997 using XDA
How ?
10 Ch.
rkkaranrk said:
How ?
10 Ch.
Click to expand...
Click to collapse
How....what do you mean how?
rkkaranrk said:
How ?
10 Ch.
Click to expand...
Click to collapse
You talking to me?
Sent from my SAMSUNG-SGH-I997 using XDA
Oppps i am sorry guys i was posting this somewhere else.
rkkaranrk said:
Oppps i am sorry guys i was posting this somewhere else.
Click to expand...
Click to collapse
Lol that's alright.
Sent from my SAMSUNG-SGH-I997 using XDA
This is how i used the hemidall one click to stock here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Then I flash the dark night ICS rom like the op says and it run nice and smooth no lagg so far or any fc really other than when I put S voice onto my phone.. and like I said that Bluetooth, torch, HD video record is choppy, and no hdmi but I really like I just hope they get the flash light sorted out soon I use it all the time!!! Ya that's how
Sent from my SGH-I997 using xda premium powered by Dark Knight
Kdog71588 said:
This is how i used the hemidall one click to stock here is what I do, below are how i perform using qkster's method...
The USB + Volume Down + Volume Up Method: Download mode (Noticeable by an Android robot digging with a shovel) is reached by taking everything out (Battery, SIM, MicroSD). plug in the USB cable to your computer and phone then putting in battery at the same time Holding the volume buttons both up and down, (Don't press the power button at all in this method).
How to INSTALL:
1. Put your phone into Download Mode.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
download this file for your one click to stock...and using above directions...
once that is done and you want to put CWM mod on for flashing a custom ROM, same directions to get in to download mod...
download this file to use the one click to put CWM mod on your phone
here is the link where i took all this...
http://forum.xda-developers.com/showthread.php?t=1524081
Then I flash the dark night ICS rom like the op says and it run nice and smooth no lagg so far or any fc really other than when I put S voice onto my phone.. and like I said that Bluetooth, torch, HD video record is choppy, and no hdmi but I really like I just hope they get the flash light sorted out soon I use it all the time!!! Ya that's how
Sent from my SGH-I997 using xda premium powered by Dark Knight
Click to expand...
Click to collapse
That's the method I used too.
Sent from my SAMSUNG-SGH-I997 using XDA
BaconTelevision said:
Hey community.
Long time lurker, first time poster. Anyhow, my brother bricked his infuse last night. Apparently he tried to flash an incompatible cwm fw (Nexus S) and rebooted it, and now its stuck at the samsung logo. Secondly, i tried to push it into download mode and it continues to loop. I tried to connect it to Odin and it does not recongize the phone, however it freezes at a picture of a wheel (similar to windows hourglass) and doesnt move from there. i'm assuming its perm bricked at this point, unless you have suggestions. Others have mentioned "jig" and "unbrickable mod" although I could not find any details further than the terms. Any help would be appreciated.
Click to expand...
Click to collapse
ok I lost my self here...Bacon...did you resolve your issues...??
bigjoe2675 said:
ok I lost my self here...Bacon...did you resolve your issues...??
Click to expand...
Click to collapse
I don't think he did
Sent from my SAMSUNG-SGH-I997 using XDA
samsung i997 bootloop no bootloader solution
Dear guys i'm not saying this will be everybody's case but in my shop we got two of this phones with the issue mentioned above, in the two cases the issue was caused by faulty power button, so before you format or flash your samsung i997 i'll advice to go to youtube search for a diassemble video for your phone take out the main board and with your tester verify that your power button is working properly. If not try to replace the power button. i have soved the two cases that way.
I have a Rogers LG-P925g. I have rooted, flashed roms, unrooted and returned to stock and rooted again. I have read this forum extensively. As I understand, any O3D should go into recovery by the volume down,+ 3d and power method. In at least 100 attempts ( stock, rooted, custom rom) this method has never worked for my phone. The only way I can get to recovery is through Rom Manager. This makes it kind of scarey when you get into a boot loop and can't get rom manager running to pick "reboot into recovery"
Took me days to finally stumble across using Smartflash to re flash stock rom to unbrick phone after stupidly using LG update on my rooted and ThiaiZ O3D V2.8 phone. Being able to use vol- and 3d when power would have saved me countless hours of work.
Anybody else have this problem? Any other way to get into recovery?
zrpeg said:
I have a Rogers LG-P925g. I have rooted, flashed roms, unrooted and returned to stock and rooted again. I have read this forum extensively. As I understand, any O3D should go into recovery by the volume down,+ 3d and power method. In at least 100 attempts ( stock, rooted, custom rom) this method has never worked for my phone. The only way I can get to recovery is through Rom Manager. This makes it kind of scarey when you get into a boot loop and can't get rom manager running to pick "reboot into recovery"
Took me days to finally stumble across using Smartflash to re flash stock rom to unbrick phone after stupidly using LG update on my rooted and ThiaiZ O3D V2.8 phone. Being able to use vol- and 3d when power would have saved me countless hours of work.
Anybody else have this problem? Any other way to get into recovery?
Click to expand...
Click to collapse
Well its either a manufacturing defect, meaning one of the buttons isnt working, or you're doing it wrong.
Sent from my LG-P925 using xda premium
Markyzz said:
Well its either a manufacturing defect, meaning one of the buttons isnt working, or you're doing it wrong.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Thought that would be the answer, but the buttons work, i.e. I can turn volume up and down, and 3d button works when phone in normal operation. I could be doing it wrong? Believe me, I have watched countless you tube videos showing how to do button press and read every description I could find in O3D forum, but still, I guess I could be doing it wrong. Tried every little variation in how I press them and when I let go, to no avail. I have many devices and done lots of rooting and rom flashing. Still I guess I could be doing it wrong. Even tried the 910k resistor usb, but no way could I get into recovery. Only with Rom Manager. So I know phone will go into recovery or at least I know it will go into CWM recovery.
Thank you for reply though, appreciate any input!
zrpeg said:
Thought that would be the answer, but the buttons work, i.e. I can turn volume up and down, and 3d button works when phone in normal operation. I could be doing it wrong? Believe me, I have watched countless you tube videos showing how to do button press and read every description I could find in O3D forum, but still, I guess I could be doing it wrong. Tried every little variation in how I press them and when I let go, to no avail. I have many devices and done lots of rooting and rom flashing. Still I guess I could be doing it wrong. Even tried the 910k resistor usb, but no way could I get into recovery. Only with Rom Manager. So I know phone will go into recovery or at least I know it will go into CWM recovery.
Thank you for reply though, appreciate any input!
Click to expand...
Click to collapse
Well for me the only way to get into Cwm is pressing power +volume down + 3D, but if I keep power button pressed, phone will power off, or never get into Cwm, so I let go the power key, and press it and let it go many times till it get to Cwm.
That's my way since I got the phone. Hope it helps You.
Sent from my LG-P920 using xda premium
I updated the phones ROM and rooted it perfectly. In the process of the newest rom update, while in Clockword recovery mode - wipe data was accidentally selected, in the middle of the data wipe I tried to save the phone by removing battery. Now its stuck in bootloop, Recovery mode doesn't even come up, but I succeeded in getting the phone into Download Mode, but it has the Triangle up with CUSTOM BINARY DOWNLOAD: YES(2 COUNTS) and CURRENT BINARY :CUSTOM. I have used Odin to try to install the Stock Att version, still no luck. as of now the phone is bricked, and can only get it into download mode. Can somebody please help? Ill die if I can't fix this phone, and Just so you know, I don't have a USB jig to delete the custom binary files. Is that the only way I can get the phone to actually turn on and function? Help plz Im freakin here...
Sassy.Rainbow.Bong said:
I updated the phones ROM and rooted it perfectly. In the process of the newest rom update, while in Clockword recovery mode - wipe data was accidentally selected, in the middle of the data wipe I tried to save the phone by removing battery. Now its stuck in bootloop, Recovery mode doesn't even come up, but I succeeded in getting the phone into Download Mode, but it has the Triangle up with CUSTOM BINARY DOWNLOAD: YES(2 COUNTS) and CURRENT BINARY :CUSTOM. I have used Odin to try to install the Stock Att version, still no luck. as of now the phone is bricked, and can only get it into download mode. Can somebody please help? Ill die if I can't fix this phone, and Just so you know, I don't have a USB jig to delete the custom binary files. Is that the only way I can get the phone to actually turn on and function? Help plz Im freakin here...
Click to expand...
Click to collapse
After flashing to factory rom I get this error message: E:failed to mount /dbdata (File exists)
E:copy_dbdata_media:Can't mount /dbdata your storage not prepared yet, please use UI menu for forma and reboot actions.
Try using heimdall, go to download mode with that triangle.
here is op:
http://forum.xda-developers.com/showthread.php?p=23118134
Here is my upload if u want them:
http://d-h.st/users/bradman117/?fld_id=17853#files
if u don't now what to download here's my 2 links, using heimdall flash stock then flash kernel.
The kernel will give u root and recovery (faster way of rooting )
Sent from my Galaxy Nexus using xda premium
bradman117 said:
Try using heimdall, go to download mode with that triangle.
here is op:
http://forum.xda-developers.com/showthread.php?p=23118134
Here is my upload if u want them:
http://d-h.st/users/bradman117/?fld_id=17853#files
if u don't now what to download here's my 2 links, using heimdall flash stock then flash kernel.
The kernel will give u root and recovery (faster way of rooting )
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank you so much, my phone is working now. I just have to find a way to reset the binary download count(get rid of the yellow triangle) without purchasing a USB jig. Any suggestions? Im trying to update firmware to ICS and then Jelly bean. I tried flashing it to a newer version(ics), but then the phone goes back into bootloop (i think bc of flashing it to ics, then jelly bean, and then back to a rooted stock verison), so I have to keep using the rooted stock firmware. Any suggestions? Thank you btw
Sassy.Rainbow.Bong said:
Thank you so much, my phone is working now. I just have to find a way to reset the binary download count(get rid of the yellow triangle) without purchasing a USB jig. Any suggestions? Im trying to update firmware to ICS and then Jelly bean. I tried flashing it to a newer version(ics), but then the phone goes back into bootloop (i think bc of flashing it to ics, then jelly bean, and then back to a rooted stock verison), so I have to keep using the rooted stock firmware. Any suggestions? Thank you btw
Click to expand...
Click to collapse
Getting to download mode is all the USB jig does. U can get it with out one. I believe if u hold down volume and plug in cable. Its something like that I forget. And a return to stock using heimdall or Odin should fix anything
Sent from my Galaxy Nexus using xda premium
im having troubles too!!
i have a similar problem myself. I rooted my infuse it has cwm9 and ics. but for some reason the phone cuts off and starts boot looping. i cant get it in download mode or recovery. took the battery out put it back in and its starts doing it without touching the power button. ive beat and banged on it still nothing but the loop. this is the longest it has done it, usually it would quit after a few minutes but its going on 24 hours now. any help would be awesome!!!
Try holding the volume up and the volume down (but not the power button) with the USB plug already in the phone and hooked up to the computer and then insert the battery. If you don't get into download then you either need a jig or have a power button problem.
Sent from my SGH-I997 using xda premium
psal217050 said:
Try holding the volume up and the volume down (but not the power button) with the USB plug already in the phone and hooked up to the computer and then insert the battery. If you don't get into download then you either need a jig or have a power button problem.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
i tried the method you just described and its a no go. where do i get a jig? i didnt have this issue till after i rooted and updated so i wanna rule out power button at the moment and try the jig
Ebay is where I got one.
Sent from my SGH-I997 using xda premium
Can get into download mode,
I am able to get into download mode, Ive flashed the OS a number of times back to stalk, then tried ICS, and jelly bean, and I still get the same error message I got at the beginning of this post. But I was able to reset the Binary counter, if I could get my phone to work again I would literally pay somebody to help me....I know it is possible to get it back up and running, it's just a complicated process it seems. Help please!
Chainfire had a program called Triangle Away. Do a search but be careful, it might not work with Infuse and you could get a real brick.
Sent from my SGH-I997 using xda premium
i have bricked my infuse many times, and xda members always have been helpful to me
i am now that the point of believing that my infuse is un-brick-able, so I am writing down my instruction as a noob for you
A/ Preparation in your computer:
1. Install/Update Java (http://java.com/en/download/index.jsp) and Get the driver for the Samsung ready (download and install Kies software at http://www.samsung.com/us/support/owners/product/SGH-I997ZKAATT)
2. download Heimdall One-Click Back-To-Stock UCKJ4 + Easy CWM install at http://forum.xda-developers.com/showthread.php?t=1331381 (maybe put it right there in the desktop)
3. Download SGH_I997 Entropy 4_4_2012-One-Click-Heimdall.jar (maybe put it right there in the desktop)
4. Download: CM-9-20120620 from here http://forum.xda-developers.com/showthread.php?t=1601844
5. Download: CWM-community-kernel from here http://forum.xda-developers.com/showthread.php?t=1119598
6. Download a rom and gapps ( i use the AvatarROM and Gapps from here http://forum.xda-developers.com/showthread.php?t=2174227)
*connect your phone to the computer and copy and paste the 4, 5, 6 items into your sd card
* i am not so sure where you are at, but maybe you don't need flash the cm-9
what you need to do:
a. pull out the battery, put it back on, holding down both the volume buttons while plug in the use cord, the other end of the usb already plug in the computer, that would put you to the download mode
b. by now your computer would be noticing the phone is connected, you then click the Heimdall at 2 above to turn it on (read that thread so you can know what to expect) if you have the drive and the phone is really connected, then, you can click "flash" and the Heimdall will do it job - don't do anything the phone will be rebooting itself back to stock (in the thread, the dev. said you might need to flash two times, but in my case, I only did once and it worked right away)
c. be happy with result for a while, then you put the phone back to download mode and flash the Entropy Heimdall at 3 above, your phone will get the red recovery if things go the way it should
d. then you wipe everything (maybe no need but whatever... after bricking your phone, it doesn't hurt to spend a min. to do this), 2 wipes at the main red recovery and then go to advance and wipe advik catch and battery state .. i would do every wipe 2 times ... and also select the "fix permissions" in there too
e. then you flash the cwm community kernel at (5) assuming that you already put it in the sd card of your phone (if not, then you choose the option from the the red recovery "connect as usb drive, your computer wil read the phone and allow you to copy and paste - i must say here that I tried this step a few times in order to make it work, i even reboot my computer)
then you flash the ROM and Gapps that you want to (assuming that you already put them in the sd card of the phone)
if jellybean didn't go through then maybe you should try the cm-9 first ...
be patient, very patient if things to the way it should, your phone will reboot a few times and recovery will change its color ... and you will get to the ROM you want
while you are waiting for those reboots, take time to read at least the first 3 pages of the threads that I put the links above to learn about the problems and what to expect
don't panic very much it will led to bad decision
your phone will be fine as XDA dev. have spent a great deal of time, energy, thoughts on the infuse
once again, hope you understand my noob instruction and esl writing
you phone will be working again
Thanks but I didn't needed these. I may not be a pro but definitely not a noob. I was only responding to the previous comment.
Sent from my SGH-I997 using xda premium
opps, i didn't see that I accidentally quoted you
sorry
NP.
Sent from my SGH-I997 using xda premium