Related
Hi,
I was a bit bored this evening and I thought I could build myself a usb-cradle for my diamond. I just slammed it together because I just wanted to see if it could work.
What you need:
- the orginal plastic box your diamond came with
- good aiming skills, (i was too lazy to measure anything)
- about 60 - 90 minutes, depending how fast you work
- some tools i guess
- NO glue! Everything will fit so there is no gluing needed (i hate gluing)
What i did:
- cut out the shell the diamond was lying in, cut the top bit off and cut out a gap for the usb cable to fit through. This will be called the "tray" where the phone will be sitting in
- cut a gap into the top of the box to slide the "tray" into it
- cut a small hole into the back edge of the box, for the usb cable to fit through, when the box is standing on the table
- please take a look at the pictures so you might get a better idea of it
Hope someone likes it
greetz, Greebear
PS: you can even hide the charger and usb cable under it
EDIT: http://www.youtube.com/watch?v=0nG0EKw0r1Y
How about a pic of the finished cradle without the phone.
Surur
here you go
doesnt seem too sturdy
good luck if u have to send the phone back
hehe nice job tho
mugglesquop said:
good luck if u have to send the phone back
hehe nice job tho
Click to expand...
Click to collapse
thanks... hmm... hope i dont have to send it back then
sorry, couldnt help myself.
i got a bit of inspiration when seeing you diy cradle out of the box...
tought i could do that myself... but i just changed the design a bit...
here are the pics:
yeah, nice
i like planting seeds
greebear said:
yeah, nice
i like planting seeds
Click to expand...
Click to collapse
i actually use my diy cradle every day
but im upto making some improvements...
trimming it down and adding some rubber feet and weight...
Jeeze guys..appreciate initiative, but you can buy a cradle from HK on eBay with a UK AC adaptor for less than a tenner....
,,,nice to see the box recycled I suppose
aaah, i had the box lying around anyway, this way its more or less usefull again
i know the cradles costs nearly nothing, but it was just good fun to build
recycling foam. i am using this to keep my devices upright on my night table.
foam from a TV and knife. that's all. easy to add the usb plug for charging in diamond's "cradle".
Was also thinking of making something from hard foam, one for home and the other for office.
I have a bunch of scrap lexan and acrylic panel material 3-6mm thick at work. I guess I'll have to try my hand at making a cradle. It would be useful since I just throw my phone on my desk right now and I really don't want to get it all scraped up.
There is something nice about making stuff that you could buy...just because you can.
what could be even better is when you have acces to a mill... mill it out of a massive block of acrilic
I found a good usb-cradle too.
"Freedent box" + piece of rubber, it doesn't look nice, but it's very simple for office desk.
For home, I have the HTC Cradle !!!
I was thinking something like this since I'm creative and I don't want to pay that much for a htc cradle.
Get some plastic, design it, mold it. Make a box.
Get the Dongle that has a 3.5mm, 2.5mm, and a usb connector.
Anyone see where I'm going
That way, my cradle will be able to attach to my 5.1 system
I'll post pics if I ever get to it.
Something like this:
In situation:
It looks ridiculous... but, it's very reliable !!!
hsena said:
In situation:
It looks ridiculous... but, it's very reliable !!!
Click to expand...
Click to collapse
i got it
Much respec
Who cares if manufactured cradles cost peanuts and your home made one has a face only a mother could love...the warm after-glow of having created something useful from nothing more than compensates.
It's really annoying. The Hero's got it, and it was invaluable to me. saved my phone many a time.
I've been reading many reviews online re this lacking on the Nexus One as well, and users as well as editors citing Apple as starting the dumb trend to eliminate a strap connecting point as I am sure it would ruin steve's aesthetics. So why did HTC have to go follow this dumb new trend?
Does anyone know if any of the silicon cases set to come out will have at least the option for a carrying strap?
You know this was brought up at HoFo. We were talking about creating some sort of lanyard port on the iPhone itself. Maybe if case-mate got the hint and started producing cases....
Anywho, what could be done is get a thick gelli/silicone case and use a small tipped screw driver or even a safety pin to create 2 holes anywhere on the case.
That eBay seller (e-story) that I keep talking about, has Nexus One cases that have a built-in lanyard port. Unfortunately he hasn't started selling silicone cases yet for the Desire. Hopefully sometime in the next few weeks.
I posted a link earlier with a guy in Hong Kong who has started to sell a silicone case that can possibly be modified with the holes for a lanyard.
thanks for the reply. I already have "ruinified" my back cover by placing those self adhesive gripper strips on it so the phone doesn't slip out of my hands. It's way more slippery than the Hero -- which is funny, because so many review spoke of how the phone's materials had more of a grip feel to them... not so. Yes, some resistance vs slipperyness of polished plastic or aluminum, but not enough to be safe.
So that was "be safe not sorry" measure #1.
Measure 2 is: I ordered already a silicon gel case for the Desire. It starts shipping in 5 days. I have no idea the quality. But to me it's insurance at this point, since who knows how long til the market is developed withj accessories. quite amazing how unprepared the accessory market was. Not like this phone was a secret.
I ordered from here, since i am usa:
http://www.amzer.com/Amzer-Silicone-Skin-Jelly-Case-Black-P87961.htm
but found it here initially, a uk vendor for them:
http://www.fommy.co.uk/view-full-page.asp?divid=HTC&model=HTC+Desire&cat=Cases&skuno=87961
I am sure i must have seen it on one of these threads.
I will for sure be fashioning a carry strap one way or another, and how dumb for HTC to "delete" this usability design element... especially when the European Hero (NOT the ones you would have seen in the USA) has the most elegant design including its carry strap hole and method of securing. Just beautiful. I wonder if the Legend has a carry strap or did they abandon it there too...
redrazr7791 said:
You know this was brought up at HoFo. We were talking about creating some sort of lanyard port on the iPhone itself. Maybe if case-mate got the hint and started producing cases....
Anywho, what could be done is get a thick gelli/silicone case and use a small tipped screw driver or even a safety pin to create 2 holes anywhere on the case.
That eBay seller (e-story) that I keep talking about, has Nexus One cases that have a built-in lanyard port. Unfortunately he hasn't started selling silicone cases yet for the Desire. Hopefully sometime in the next few weeks.
I posted a link earlier with a guy in Hong Kong who has started to sell a silicone case that can possibly be modified with the holes for a lanyard.
Click to expand...
Click to collapse
I do agree that it was sort of retarded to leave out the lanyard port. Even the MyTouch 3G had it
What you could do is also drill 2 little holes into the back-cover of the phone, line them up with the silicone skin and place 2 holes through the skin also. This way you have added security with the strap being through the back-cover and the skin.
I just did some searching on eBay and it seems that more sellers are starting to push out cases for the Desire. They look pretty good, especially since they cover the whole phone (buttons and trackpad), not just running around the border of the phone -
http://cgi.ebay.com/Blue-Silicone-S...ewItem&pt=PDA_Accessories&hash=item414ef7eed5
http://cgi.ebay.com/Black-Silicone-..._MobilePhonesCasesPouches&hash=item4aa097dbda
http://cgi.ebay.com/Silicone-Case-L...ewItem&pt=PDA_Accessories&hash=item414ef49799
Thing is...they are all located in Hong Kong
redrazr7791 said:
I do agree that it was sort of retarded to leave out the lanyard port. Even the MyTouch 3G had it
What you could do is also drill 2 little holes into the back-coveri of the phone, line them up with the silicone skin and place 2 holes through the skin also. This way you have added security with the strap being through the back-cover and the skin.
Click to expand...
Click to collapse
That's an idea worth considering but of course 2 problems ... backs snap is itself not secure enough for holding weight of hand ... and the warranty void. I did buy 3rd party insurance from square trade which covers accidental damage incl dropping...
Still I would seek some more secure anchor method... If I had some spare time, I swear I would do this: I'd work my way through the corporate maze at HTC until I burrowed into someone in actual product design... and then I would pose the challenge to them from a purely hypothetical point of view about where and how this fish-line could be anchored.
redrazr7791 said:
I do agree that it was sort of retarded to leave out the lanyard port. Even the MyTouch 3G had it
What you could do is also drill 2 little holes into the back-cover of the phone, line them up with the silicone skin and place 2 holes through the skin also. This way you have added security with the strap being through the back-cover and the skin.
Click to expand...
Click to collapse
The skin would have the advantage of keeping some extra pressure keeping the back on, with out this I would also be worried about the back pulling off. I would make the holes nearer the bottom because this edge is opposite the edge which is designed to be opened.
I've gone the Zag InvisibleSHIELD route, so I have no plans to fit a silicon skin, so I've had to find a different solution.
I found that I can loop the lanyard fixing chord around the sim in the phone, between the silver sim socket and the 'runner' about 5mm away on the left hand side of the sim. It makes it tight work to get the sim back in place, but it does seem to work. I was considering making a small hole on the right hand edge of the back panel to allow the mounting chord to pass through but now I don't think this is necessary as the back does clip into place with only the slightest bump.
The sim socket, which will now be taking the strain from the lanyard, is fixed very securely. When I first tried to insert the sim into the phone I didn't even realize the 'runner' was there and tried to slide the sim in over the runner and didn't manage to get the socket to pop out.
Spud, congratulations on a GREAT "Post #1" to XDA ---- one of the best examples of a "Post #1" I have seen here in years. I am really thankful you posted this, as I find this to be an essential accessory... One which to me reduces stress far more than any case or screen shield... Knowing I have the phone strapped to my wrist has always given me primary peace of mind for a device that is so precisely put together where one drop could dislodge any number of things, even if a case prevents a knick or scratch.
REQUEST: Could you get a camera that has macro-close-up focus, and take a few extreme close up pictures of your assembly? I have a good sense for what you mean, but nothing speaks like a picture. I was thinking of exploring this kind of route myself, trying to figure out a way similar to how the HERO's anchor point was designed so brilliantly.
I think new members have some restrictions on posting links, and I am guessing no file attachments either, so, would you consider please taking a full series of photos, cover on, cover off, the whole process... and then email me the pics? and then i can post them here, and this could help a lot of people.
You can email me at my user name here @ gmail dot com. Thank you for posting! And welcome to XDA-developers. How do you like your desire? Have you had a touchscreen phone before? If so, which one?
SpudULike said:
The skin would have the advantage of keeping some extra pressure keeping the back on, with out this I would also be worried about the back pulling off. I would make the holes nearer the bottom because this edge is opposite the edge which is designed to be opened.
I've gone the Zag InvisibleSHIELD route, so I have no plans to fit a silicon skin, so I've had to find a different solution.
I found that I can loop the lanyard fixing chord around the sim in the phone, between the silver sim socket and the 'runner' about 5mm away on the left hand side of the sim. It makes it tight work to get the sim back in place, but it does seem to work. I was considering making a small hole on the right hand edge of the back panel to allow the mounting chord to pass through but now I don't think this is necessary as the back does clip into place with only the slightest bump.
The sim socket, which will now be taking the strain from the lanyard, is fixed very securely. When I first tried to insert the sim into the phone I didn't even realize the 'runner' was there and tried to slide the sim in over the runner and didn't manage to get the socket to pop out.
Click to expand...
Click to collapse
Not recommending it, but have you thought about threading through the two holes for the front top "speaker"?
quicksite said:
REQUEST: Could you get a camera that has macro-close-up focus, and take a few extreme close up pictures of your assembly? I have a good sense for what you mean, but nothing speaks like a picture. I was thinking of exploring this kind of route myself, trying to figure out a way similar to how the HERO's anchor point was designed so brilliantly.
I think new members have some restrictions on posting links, and I am guessing no file attachments either, so, would you consider please taking a full series of photos, cover on, cover off, the whole process... and then email me the pics? and then i can post them here, and this could help a lot of people.
Click to expand...
Click to collapse
Sorry, I can't run to a full set of photographs, but I hope the following will suffice.
Hmm. Don't really like that. Looks risky and deforms the case.
SpudULike said:
Sorry, I can't run to a full set of photographs, but I hope the following will suffice.
Click to expand...
Click to collapse
That's pretty impressive.... I didn't check the inside of mine initially when you described it, and so before the pictures I was imagining that carry strap feeding down through the bottom of the cover, and I was wondering how that would work. So I actually didn't realize til I took the back of my Desire off that it's coming off the left side when looking at the screen, which is good placement ergonomically.
As for the engineering tensions and torques, I have no idea... I was trying to just imagine it in my head, and i applied force to the plastic sim card in the downward direction if the device were to slip from my hand... I can't evaluate but one thing's for sure, as you said, with your scenario of no case, this is, to me, a much better solution that praying no accidental dropping.
HTC really should have handled this (pun intended). Nice job! And thanks for the pics. I didn't know new registrants could post pics until x number of posts, but I guess you've shown otherwise, and that's a good thing.
al89nut said:
Not recommending it, but have you thought about threading through the two holes for the front top "speaker"?
Click to expand...
Click to collapse
Well do you mean anchoring it at the top and draping over the back and hanging down that way?
I'm going to simulate what MAYBE you mean, and photograph it.. then post again and ask...
al89nut said:
Not recommending it, but have you thought about threading through the two holes for the front top "speaker"?
Click to expand...
Click to collapse
Is this what you had in mind? This is just a "fictional dramatization".. Do not try this without adult supervision. But now that I see it, I wouldn't mind at all seeing 2 black threads at the top...
I guess when I get a silicon gel casing I won't need this solution, but i think it's also pretty good. Now if only someone can determine how & if the black-thread fishing line can be fished through the opening.... Oh, and if this wasn't what you had in mind, what WAS your idea?
.
That was it, though as I said, I would not be sure that it would not deform the two holes or interfere with the sound quality.
There is another better option - if you take the back off there are two torx screws in the top left and the top right (from the back) locations. I should imagine that if loosened, something could be looped around the top right one and then it could be tightened back up. Whether that loop would be the lanyard or a connecting piece of strong nylon I don't know. If you really want to go to town, you could probably try to cut a tiny tiny nick so it could come through the back cover where the notch is already cut to let you pry the back off. That's my best suggestion.
Attaching a strap
I have threaded fishing line through 4 of the holes in the speaker thingy on the top back and made a small loop. I have attached my lanyard strap to that and it has worked ok so far.
tirc83 said:
I have threaded fishing line through 4 of the holes in the speaker thingy on the top back and made a small loop. I have attached my lanyard strap to that and it has worked ok so far.
Click to expand...
Click to collapse
Oh, i would LOVE to see a photo! so cool.
Meanwhile, I have created a lanyard carry strap using a silicon case, punched a needle sized hole through and attached to a small smooth edged thin "plate" about the dimensions of an SD card.
I have been meaning to post my video on this. It is awesome.
But I and OTHERS would love to see your solution in pictures. Could you take some please? and if possible take close up macro shots right at the speaker grill with good lighting shining right in there, maybe a flashlight, so that we can see what IS or is not being obstructed..... the big worry was that fishing a line thru there would puncture the speaker itself.
So could you describe what you discovered?
thank you! great job!
Pics of fishing line method
quicksite said:
Oh, i would LOVE to see a photo! so cool.
thank you! great job!
Click to expand...
Click to collapse
OK here are three pics of the finished article. I just removed the back cover, threaded through some fishing line and tied a small loop. I was then able to use this loop as an anchor for the strap.
Nice, but I would really, really worry that the back cover will come off. Better if you can secure it to some of the screws inside the Desire.
tirc83 said:
OK here are three pics of the finished article. I just removed the back cover, threaded through some fishing line and tied a small loop. I was then able to use this loop as an anchor for the strap.
Click to expand...
Click to collapse
Oh, I see now, I hadn't noticed -- you fed thru the BACK cover speaker grill.... When i first read i thought you had created the solution i made the video simulation about, which was afixing the lanyard fishing line around and behind the FRONT speaker grill -- which is why i mentioned there was fear about tearing into the speaker.
Well you saw the other person's solution, right, where he attached the lanyard to the micro SD card cage inside and send the line out the side. Some people liked that conceot, some didn't.
Okay, i have to post my pics. I have a 50-photo sequence of very detailed extreme close-ups of creating a lanyard strap for use with a silicon casing. It's practically foolproof. I say practically, because there are always ways to be so reckless beyond what any guardrails on a mountain roadway will ever do to protect you and your car from tumbling over the edge and over the mountain
I'd say the concerns in this case are correct... With the attchment point being just the back cover; I'm afraid that is not reliable enough to risk a $550 device's safety on.
I have not reviewing this thread, so not sure if it was on this one or another one where someone talked about using one of thecasing screws of the internal phone device.... though i think these void your warranty.
(time for me to say again: why oh why oh why HTC, why did you blindly follow Apple's iPhone BAD DESIGN PHILOSOPHY and do away with this small little item that protects a $500-$550 device? The design of the HERO *had* the carry strap hook, and it was brilliant and elegantly designed... sheesh !)
Can they tell if you loosen a screw a little?
anyone know where i can get a one piece case for my epic? i am a mason and at work i get dust in the slider so a one piece would keep it sealed.
There's one coming out on May 8th but its gonna cost $200 w/ new contract
stir fry a lot said:
There's one coming out on May 8th but its gonna cost $200 w/ new contract
Click to expand...
Click to collapse
Haha that was golden
Sent from the Epi(demi)c
I wish they made these as well.... I'd love something that just clamps my phone together and makes it feel solid again...
I just got the Otterbox Commuter case for the Epic. It stays as two pieces, but they rest against each other in such a way that it eliminates nearly all of the screen wobble, even when it's open.
It seems as though it was designed that way so that it would transfer shock from the front of the phone to the rear before the sliding mechanism would move.
I actually hadn't planned on buying it, but the clerk at the Sprint store encouraged me to try it on. It feels like a new phone, now. A tougher one, by far.
problem with all those 2 piece cases is when i get in my car and want to throw it in the dock.. it either takes for ever to take apart or the removing and reinstalling of the case messes up the tabs that keep it on. i want to be able to protect my phoen at work, and then rip off some kind of plastic silicon cover when i get out of work
Ziploc bag (ain't pretty but keeps the dust n crud out)
Sent from my HTC Vision using Tapatalk
Hey whats up guys,
I just purchased this item from Amazon.com (http://www.amazon.com/gp/product/B004XYQWXI)
I just got this in the mail today, have not gotten a chance to use it.
I will try to give it my best to review this product.
-Product feels pretty good, solid build quality, doesn't feel like cheap ****
-The phone fits perfectly well if you are NOT using a phone case. I tried to put the phone in with a TPU case, and it did not fit.
-Trying it on my arm, it feels pretty tight and snug. (Not sure if that's how armbands are supposed to feel. My arm feels constricting a bit, I don't think this is feasible if you are going to work out your arms?) ... But I will update this part after I have used it tonight working out my back and biceps.
-There's a cool section for your to put your headphone wire in so it doesnt hang all over the place.
Check out the pictures, I will try to update this more. If you have any questions I can try to answer them here.
Pictures they provided
http://ecx.images-amazon.com/images/I/61lUAoP2bVL._AA1000_.jpg
http://ecx.images-amazon.com/images/I/61xn4vLqIcL._AA1000_.jpg
http://ecx.images-amazon.com/images/I/61jbwjeLLeL._AA1000_.jpg
My pictures, (sorry they were taken with my G2x)
http://imageshack.us/f/534/img20110725152316.jpg/
http://imageshack.us/f/713/img20110725152435.jpg/
http://imageshack.us/f/62/img20110725152449.jpg/
http://imageshack.us/f/580/img20110725152509.jpg/
Thanks for the review...I"m looking forward to your update. I'm very interested in knowing how this will work for you during arms workouts...and how it would appear to hold up to sweat.
On that note, what earpieces do you use that won't break down from sweat quickly?
mmapcpro said:
Thanks for the review...I"m looking forward to your update. I'm very interested in knowing how this will work for you during arms workouts...and how it would appear to hold up to sweat.
On that note, what earpieces do you use that won't break down from sweat quickly?
Click to expand...
Click to collapse
Alright in response on how it felt when I was working out my arms. Either I am not an Armband type of guy (I usually wear a tank top or sleeve cut off shirt). I feel as if this thing gets in the way. Not sure if u guys know what I mean when you work out upper body and u like your arms to be free of anything.
The arm band felt like those things you put on your arm when yhou are testing your blood pressure at the doctor... very tight especially if you are working out your biceps.
I think this is good if you do cardio, or lower body exercises that do not require the use of the arms...
The material was okay in regards of sweat... I did not notice it leaking through and touching my phone at all. I personally thought it was going to be very itchy and annoying like how some kneebraces are now made with that neoprene type of material.
With the headphones, I have some type of rubbery material heaphones. There like 10 bucks or something I dont really care if they get messed up though.
Throughout the whole workout experience I can remember adjusting it almost after every set so it can get comfortable... Towards the end of my work out I just put it in my pants... LOL
So if you are not the arm band type of guy, do not get this. Only use it for cardio exercises or lower body so it wont bother you as msuch as it bothered me working out upper body.
Also the wire management part in the first Amazon provided picture, is VERY small you cant fit fat wires or many layers of wires if you guys understand what i mean...
With the front protector clear plastic thing, it wasn't too bad, basically it kind of felt like those ZAGG invisihields over your phone.
Gave it another go last night working out abs and legs, it didn't bother me as much compared doing upper body.
Sent from my G2x
I received some feedback asking me to post instructions on how I made my game clip to hold my phone (Galaxy S III) to a PS3 controller (homemade or DIY Gameclip). I have posted a pdf of the instructions on mediafire and attached a 7zip file of it to this post.
http://www.mediafire.com/view/?gg4lyu663854moa
I first of all would like to say I got the idea from the thread of the GameKlip and thought it was a brilliant idea and a nice product, but I didn't want to spend $30 U.S. (incl. shipping) and wait a couple weeks to get one....and I couldn't keep my case on the phone while I used it, so I made my own. Kudos to the GameKlip if you are interested in getting one.
Here's the latest Gameklip for the Galaxy s3 http://forum.xda-developers.com/showthread.php?t=2027611
I do love using my GameKlip... when not using my extended battery (which I have on most of the time). This will solve all! I wonder if some sort of insulation for pipe/etc could be used to further cushion the phone... hmmm.... Maybe one of the rubber coated hangers.
Either way, how did I not think of this?! I tried sheet metal and other way more complex options, lol.
I'll post my rendition of this! Hope to try it out tonight!
THANKS AGAIN!
flawedlegacy said:
I do love using my GameKlip... when not using my extended battery (which I have on most of the time). This will solve all! I wonder if some sort of insulation for pipe/etc could be used to further cushion the phone... hmmm.... Maybe one of the rubber coated hangers.
Either way, how did I not think of this?! I tried sheet metal and other way more complex options, lol.
I'll post my rendition of this! Hope to try it out tonight!
THANKS AGAIN!
Click to expand...
Click to collapse
Thank you. I have thought about something like plasti-dip ... dip the whole thing after making it...probably would just have to take into account the thickness if the coating while making it.
http://www.homedepot.com/buy/performix-brand-plasti-dip-11603-6.html#.UP1_eGdmO2U
I look forward to seeing your idea of it, please post pics. I have thought of different ways to "design" it, including having only one arm holder at the top. Making the bottom "hooks" up from the button 1 & 2 "towers" to move the phone up, etc... in the mean-time it works well for me...I hope yours does for you.
I got some Plasti-Dip at home I use on my car and thought of that as well. I got a few different ideas I'm gonna try to play with. ... Just a matter of finding time as wife and I are preparing for our firstborn. I'll definitely post pics of whatever I come up with!
possible to do a similar style but for a mini bluetooth keyboard? im having a hard time figuring out that one....
I am sure something is. I don't have a mini blue tooth keyboard. Which one do you have?
Have you seen the universal gameclip? It just sticks to a cheap case? How about a flat piece of metal stuck to case with the phone and velcro'd to the bottom of the keyboard? Could even bend it slightly if you don't want it flat?
Sent from my SGH-i747 running CM10.1 nightlies using xda premium
Excellent job
That looks pretty darn snazzy. I know I would be employing the "Close enough" meme if I tried to do that.
I have been thinking of something like this but I must design a little differently as I will use it on an xbox360 controller and a 7 inch tablet.
xdacuc said:
I have been thinking of something like this but I must design a little differently as I will use it on an xbox360 controller and a 7 inch tablet.
Click to expand...
Click to collapse
Please post pics for anyone else who may want that setup. I don't have an xbox controller so I couldn't try...it definitely looks a bit trickier. Good luck.
Thanks. I will make pictures for sure. Still in the planning phase for the moment but will work on it next week.
Tried three times and failed. Baby en route, so it's on the back burner.
BTW: the rubber coated hangers SUCK to bend, rubber tears easily! Don't waste one!
I made one with 1 hook on top to hold the phone. The bend makes it act like a spring. It's easier to get the phone out of this one
Sent from my SGH-i747 running CM10.1 nightlies using xda premium
3d printer
I made mine using your instructions; I strongly encourage you to get some shrink wrap tubing. It looks much better than whatever old varnish the coat hanger may have left, and there won't be glue smudging as with electrical tape.
I happened to have a slightly larger tube which I used on the hook portion. To make the tips, after having deburred with a file, I simply left some extra length, bent that backwards and finished it off with an additional short tube added in a second pass.
It is preferable to make your bends first, then work the tubing on, as pliers will most likely damage the tubing cosmetically at least.
A small black zip tie secures the mini-USB cable. Not shown in the photos, I found an old camera lanyard and added over the metal frame for some additional security.
Here are the results:
Cheers,
Darkshado
Awesome! Thanks for posting pics! I use the sixaxis app so I don't need the wires but yours looks great with them. I like the tubing too. Your are of course absolutely right about no gummy from the tape with the tubing. I bet it makes it stickier too so the phone won't slide around.
Sent from my SGH-i747 running CM10.1 nightlies using xda premium
Darkshado said:
I made mine using your instructions; I strongly encourage you to get some shrink wrap tubing....
Darkshado
Click to expand...
Click to collapse
Looks awesome, I'm definitely going to attempt one myself. What diameter heat shrink did you use? (approx)
Thanks! IIRC, the smaller one was 4-5 mm, the larger 10 mm. It can always be cut and removed if the size you're using isn't working, and tubing like this is cheap.
LONG overdue but needless to say I've failed at 3 attempts. Trying to get them perfect and they snap on me. Might just try to mod one of my 1st Gen Game Klips I got laying around since I now have the 7000mAh battery to give me PLENTY of gaming!
Guys its a lot easier to buy a spider podium and wrap it and shape it to fit your phone. Worked perfectly. Only downside is that its unremovable. Just added a camera lanyard
Sent from my YP-GI1 using xda app-developers app
pics?