Related
I bought the case the same day I got my phone. I removed the case today to remove dust from under the case and notices that the sides of my Epic were scratched by the case
Thank you for the tip. Have you gotten a replacement for it yet?
Pops_G said:
Thank you for the tip. Have you gotten a replacement for it yet?
Click to expand...
Click to collapse
Not yet. I sent Xentris an email but they haven't replied yet. I'm sure if I complained to Best Buy about it they'd give me a new phone but I don't know if I will. I wish they made a case that was lined with silicone on the inside for the Epic.
This seems to be a common problem for the Epic hard cases. I'm not a fan of hard cases just because of the bulk, but it's good to know they are messing them up.
Kcarpenter said:
This seems to be a common problem for the Epic hard cases. I'm not a fan of hard cases just because of the bulk, but it's good to know they are messing them up.
Click to expand...
Click to collapse
I'm not a fan of hard cases either, I prefer silicone cases, but since the Epic is a sliding phone all we get are hard cases
cant stand hard cases either....for now until i find the right case (i swear its taking longer to find that than my last car). All im using for now is a bag that i got with a pair of oakleys from sunglass hut. scratch protection....better than nothing. every other type of potential hazzard.....its a nightmare!
do they make a case that does not allow the phone to slide? may sound terribly stupid, but my gf does not really need the physical keyboard...
just curious.
flame on
I tried the Verizon gel case at Best Buy, not great, because I don't want the slider either.
Next stop is cheap kiosk at mall, the Verizon phone has same rounded corner
and shape, just thinner, so something might be workable.
different camera placement though
i had the red case way too hard to remove so i returned it and am getting a phantomzkinz instead
churro7 said:
different camera placement though
i had the red case way too hard to remove so i returned it and am getting a phantomzkinz instead
Click to expand...
Click to collapse
I had the same problem with the one sold buy Best Buy (Sedio) and I just ordered a Phantomskinz.
Just wanted to post an update, Xentris never replied to my email.
Xentris Snap on cover for Epic 3G
I was in love with this case-that is until the matte paint started peeling after only 30 days. It will do until it bugs me so bad I have to fork out the cash for a Seidio case. Don't bother. I guess it was better than carrying it out without protection but stay away from it-it's cheap crap
I emailed them-lets see where it gets me
rockethot said:
I'm not a fan of hard cases either, I prefer silicone cases, but since the Epic is a sliding phone all we get are hard cases
Click to expand...
Click to collapse
While on ebay I saw this. I haven't seen any reviews of it though.
http://cgi.ebay.com/Black-Silicone-...emZ400167973134QQcategoryZ20336QQcmdZViewItem
Yeah i have the best buy case also (think its the xnetris), and its a total POS. rubber is all peeling off and the front snap on part has scratched the phone. pretty pissed...
keekah said:
While on ebay I saw this. I haven't seen any reviews of it though.
http://cgi.ebay.com/Black-Silicone-...emZ400167973134QQcategoryZ20336QQcmdZViewItem
Click to expand...
Click to collapse
It's a fugly piece of crap, don't buy it. Thanks to Viper786 there is a review and pictures here.
I had the $20 hard case that sprint sells on mine for like 2 months.. recently took it off to notice the marks on my epic.. i got the case to keep it mint and it essentially left a etching around my phone. I thought about yelling at sprint but not sure if they would replace or send off for repair... I also didnt buy the insurance and its been over 30days so wasn't sure how that would all pan out. Might head up there tomorrow and see what they say.
BopChie said:
I had the $20 hard case that sprint sells on mine for like 2 months.. recently took it off to notice the marks on my epic.. i got the case to keep it mint and it essentially left a etching around my phone. I thought about yelling at sprint but not sure if they would replace or send off for repair... I also didnt buy the insurance and its been over 30days so wasn't sure how that would all pan out. Might head up there tomorrow and see what they say.
Click to expand...
Click to collapse
That blows. I bought that case today and I actually really like it. Not too bulky and has a nice grip. I also like the rubbery weave on the back. Now reading this makes me concerned. It seems like it is designed the same way as Seidio cases and I never had that issue with them. I may return it for Seidio then. Bummer.
gorby911 said:
That blows. I bought that case today and I actually really like it. Not too bulky and has a nice grip. I also like the rubbery weave on the back. Now reading this makes me concerned. It seems like it is designed the same way as Seidio cases and I never had that issue with them. I may return it for Seidio then. Bummer.
Click to expand...
Click to collapse
yeah i liked it for the same reason and liked it up to a week ago whe i took it off.. i figured it was just me with a random issue.. i.e sand in pocked from fishing over the summer or something... i still like it but kinda like the feel with it off too.. i'll live with it either way... but if they replace it i might look into some sort of silicone hugger or vinyl wrap.
well amazon does have the xmatrix case for epic 4g and the build quality is the best i have seen for the epic...there is no interference or friction from the keyboard ...plus it has two layers like the otterbox cases one silicone and one soft touch plastic....based on the quality of this case, they could be charging otterbox prices and this would still be a good deal....stay tuned, i will be creating a new post with pics in a few minutes
http://www.amazon.com/iNcido-Samsung-Galaxy-Trans-Silicon/dp/B004A9XSR4
I never use my keyboard and I was wondering if this case would be better since it makes the phone sturdier by securing the keyboard and maybe make it a little thinner.
Has anyone tried this case or one like it?
thats extraordinarily stupid.
Kitteh298 said:
thats extraordinarily stupid.
Click to expand...
Click to collapse
The only thing stupid was your post. No call to be so rude in response to a simple question. If you dont use the keyboard I say go for it. I've never used one myself.
Sent from my SPH-D700 using Tapatalk
Looks cool....... I wish they had it in Black......
skyheli said:
Looks cool....... I wish they had it in Black......
Click to expand...
Click to collapse
They have one in black: http://www.amazon.com/iNcido-Brand-...ES/ref=sr_1_36?ie=UTF8&qid=1301021620&sr=8-36.
In fact, I think the cheapest option is to get 5 of them lol: http://www.amazon.com/iNcido-Samsun...C8/ref=sr_1_18?ie=UTF8&qid=1301021593&sr=8-18
I'm still on the fence on this, but even if they suck, it's still less than $10 down the drain.
Unfortunately, having just bought one of the black cases above, I can say that it is absolutely, positively, NOT "one-piece". It's a standard 2-piece slider-type case.
Sigh. (sadly tosses one more case onto the growing pile of unloved cases on my dresser)
Case history so far:
Seidio: meh.
Seidio ActiveX: nice hand feel, but a major 5-minute pain to disassemble the phone when the battery dies after 4 hours, and makes it impossible to use the camera button without shaking the phone.
Aluminum Milano: would rock, if it were made from plastic. When it's closed, the phone is rock-solid, and you'd never even know the keyboard is there. Unfortunately, it's aluminum, and has a family tree that clearly began back when Sprint phones still had real antennas. Putting the phone in it instantly nukes at least one bar, makes bluetooth flaky, and renders the GPS unusable under most circumstances. Worse, the metal picks up stray cat hairs and screws up the touchscreen. As the final deathblow, it covers the top part of the touchscreen, so pulling down the window doesn't work. Totally and completely unusable.
Silicone case from this thread: I can't definitively say I hate it, but I'm still bummed out that it actually IS a 2-piece case. That said, it's nicer than I thought silicone-type cases would be and is fairly easy to remove, so I'll probably keep it on for a few days unless it seriously annoys me in some as-yet unforeseen way. However, the sides are totally unsecured, and I have a hunch my back pocket isn't going to be kind to it.
It'll be just my luck that someone will finally come out with a plastic Milano, or a one-piece silicone case, two weeks after I've already bought my next phone in October.
I hear ya brother, why not try one of those skins that protect the phone. I wanna get one but not sure which one.
Sent from my SPH-D700 using XDA App
This case is HORRIBLE.
Its a cheaply cut silicone 2 piece case. With a CHEAP FLIMSY plastic "rail" sliding groove. When I tried to put it on my phone, the plastic rail part broke, and rendered the case useless.
It doesnt fit well, is MUCH to large for the Epic, and feels like cheap silicone.
I returned it to the seller for the $5. Had to pay return shipping too.
Otterbox Commuter all day guys. best case ive found for this phone. adds a lil bulk to it but its tough and comes with a warranty from otterbox. 1 reccomendation tho if you do get the otterbox commuter series, there are 2 clips at the top, bottom and 2 on the left side of the top front piece. BRAKE THE 2 CLIPS THAT HOLD IT IN PLACE THAT ARE ON THE SIDE! It will still stay on your phone without a problem. I learned that those clips on the side will scratch your keyboard up a lil bit but not TOO horrible, they no longer have a glossy look, look more mat finish but luckily the lettering and FN symbol have not scratched off, i however am OCD about this stuff and learned the hard way but for as many times as i drop my phone, hands down best case on the market if your lookin for protection. it's smaller than the bodyglove, atleast to me it seems smaller, and for those of you who NEED to wear it on the side they do have a pouch thatll fit it. I manage a Cell Phone accessory cart in Florida so as an Epic user I'm always lookin and tryin new cases. if you guys have any question about accessories PM me =D
I can vouch for otterbox. I had the defender for my BB tour back in the day and it was amazing, to say the least. I dropped it from chest height (I am 6' 5") and it hit the cement and bounced. Zero damage to the phone itself and only a little scuff on the case. Otterbox is like having your phone inside an Abrams Tank.
-uncut and uncensored from my Samsung Epic 4G
lafronz said:
Originally Posted by jbadboy2007
Guess no one else realizes this but when the 3g or wifi icon change to a color that is when google is accessing your phone.
Click to expand...
Click to collapse
^--------ROFL!!!!
lafronz said:
I can vouch for otterbox. I had the defender for my BB tour back in the day and it was amazing, to say the least. I dropped it from chest height (I am 6' 5") and it hit the cement and bounced. Zero damage to the phone itself and only a little scuff on the case. Otterbox is like having your phone inside an Abrams Tank.
-uncut and uncensored from my Samsung Epic 4G
Click to expand...
Click to collapse
Yeh, but will it make it so you can't feel the flimsy ass screen?
Like the OP, that's all I'm looking for too... I want my phone to feel like it's a nice candy-bar phone, I don't want it to shake and rattle like my screen is about to fall off.
Ordered an Orange one, am looking forward, will review it and lt you know
Sent from my SPH-D700 using XDA App
Got my orange one today and it's pretty cheap but I got it for .98c and after shipping, only 2.75...so that's pretty cheap.
The cutouts are in the right place, it could fit more snuggly if you ask me but the color/ feel is great... will see if I can post pics.
Epic is as Epic does.
Marlinsfan88 said:
Otterbox Commuter all day guys. best case ive found for this phone. adds a lil bulk to it but its tough and comes with a warranty from otterbox. 1 reccomendation tho if you do get the otterbox commuter series, there are 2 clips at the top, bottom and 2 on the left side of the top front piece. BRAKE THE 2 CLIPS THAT HOLD IT IN PLACE THAT ARE ON THE SIDE! It will still stay on your phone without a problem. I learned that those clips on the side will scratch your keyboard up a lil bit but not TOO horrible, they no longer have a glossy look, look more mat finish but luckily the lettering and FN symbol have not scratched off, i however am OCD about this stuff and learned the hard way but for as many times as i drop my phone, hands down best case on the market if your lookin for protection. it's smaller than the bodyglove, atleast to me it seems smaller, and for those of you who NEED to wear it on the side they do have a pouch thatll fit it. I manage a Cell Phone accessory cart in Florida so as an Epic user I'm always lookin and tryin new cases. if you guys have any question about accessories PM me =D
Click to expand...
Click to collapse
ditto , otterbox commuter. FTW
ive had otterbox's on all my androids( and BBs), moto droid 1 & 2 & global, evo 4g, and my epic with zagg invisia sheild. best protection IMO.
wish they had the pink accents for my girls phone, she cant find a case she likes that doesnt feel cheap, or all the design flakes off.
also , thanks for tip about the side snaps, filed mine down with diamond file, (im a locksmith)
PokeAsheep said:
Got my orange one today and it's pretty cheap but I got it for .98c and after shipping, only 2.75...so that's pretty cheap.
The cutouts are in the right place, it could fit more snuggly if you ask me but the color/ feel is great... will see if I can post pics.
Epic is as Epic does.
Click to expand...
Click to collapse
so its a one piece silicon case? like the blackberry ones?
First of all, sorry if theres an existing topic about this.
Which one suits you? The Defender or the Commuter and why? For me I "think" the Commuter will suit me because I'm not the ones who does it hard , But the downside for me is that Commuter series got a lot of problems, like the rubber part became loose and the hard case often gets a crack without doing anything harsh(e.g: some people broke it while removing the hard case just to clean it, some people said it cracked without doing a thing!). So about the Defender series they said it is very attractive to dust and the screen protector makes the screen difficult to look at sometime, the worse of all is the Bulkiness. So.. Need some opinions here, "Thanks" in advance!
Hello , you can find same otterbox thread here . I've bought defender in march , no problem to use my phone everyday , my DHD is really in safety with it ...
I use the commuter and love it. The little plastic piece by the power button broke from the amount I press it. It was a bummer but I cut it off a bit and I don't notice it now.
I like this case because it keeps the phone protected without adding a ton of bulk. It also keeps the camera lens from scratching from setting the phone down on its back.
Sent from my Desire HD using XDA App
Well, many many thanks to both of you guys. It gave me more options.. So..
1 - Commuter
1 - Defender
I love my commuter. Not too bulky, can still change the battery within a reasonable amount of time. Still feels like I could throw my phone at the wall without damage (Not going to try).
I find the commuter is not too bulky and feels like it will protect the phone from most things. But I seem to use it less now since i rarely seem to drop my phone, though I may soon (hopefully not though) regret that soon.
Commuter here, broken part of the plastic casing though so off to there website now to see if I can get spares..
My Commuter case looked so good.
I bought one to protect the phone, of course.
It cracked right between the speaker on the back, and the rubber area between the power button and volume rocker switch.
It did this while either adjusting volume or hitting power. I've never compressed the case much, its either in my pocket or gently put down flat on a surface. It's never been dropped, and I only had it for a month and a half at the time.
It sucks because the case seems like a sure fire winner for protecting my phone, then this issue happens after a month and a half. I think I'll go get a refund from Telus, because I'm not going to get another that'll end up having the same problem.
I might get the defender for when I go up to the cottage, though, however I'm pretty disappointed so far with the reliability of this case.
I've got the defender and so far i am satisfied albeit its really bulky.. XD
Sent from my Desire HD using Tapatalk
I ordered Otterbox Commuter when they dropped in price and I'm really satisfied.
My phone doesn't drop often but it's just a safer feeling that I have when handling it.
I really recommend it because it's not as bulky as the Defender series.
I'm using Commuter for my DHD and I pretty happy with it! Not too bulky and it make my DHD look more rugged. Now I dont have problem to put it on any table or surface because I dont have to worry the back case and camera lense will scratch.
I have used the commuter for the last 11 months. It has saved my DHD from my destructive 4 year old many times.
I decided on the commuter over the defender as the defender was really large and the commuter wasn't that much larger in my hand. Actually I think it makes the DHD easier to grip.
I couldn't recommend the commuter highly enough.
i've got the defender, have demonstrated it's drop protection (by dropping it of course) many times to friends etc. no cracks
have also dropped it a few times by accident, and no problems whatsoever, it does sound painful when it hits the floor though!
i'd recommend this case any day, the bulkiness is worth it, it does protect it really well. I peeled my screen protector off it straight away.
I've got the commuter.
The silicon is great (allthough it's ripped apart at the micro-usb port).
The shell on the other hand doesn't like being dropped to often and really hates it when you take it off your phone. Got cracks in all four corners and one of them became really really long after some time. Fixed it with a lot of superglue but it's sadly not made to last very long.
i have the commuter for several months now. it was the best buy since my DHD. doesn't make the phone much heavier/thicker. but i think it feels better in my hand when holding it. i really love it. also the silicon covering the plugs is a pretty great idea.
i can't confirm the low quality and possible cracks my pre-posters mentioned. i'm not having any of them.
MarcVanWake said:
i can't confirm the low quality and possible cracks my pre-posters mentioned. i'm not having any of them.
Click to expand...
Click to collapse
It was fine for almost a year.
And it's saved my phone multiple times from being damaged in drops.
So don't get me wrong, i really like it!
But the cracks are there...
I know this is an old thread but I just wanted to add in that I love my defender series. I thought it was "just nice to have" until I dropped it out of my pocket on a busy street without knowing, and watched a car drive over it once I turned around.
You'd think that it would be crushed even with a nice Otterbox case... but I'd have to say "Nope" because when I picked it up off of the street the box and the phone were still in MINT condition. Best piece of plastic I've ever purchased.
h4rex said:
could someone tell me the differences between the original and the fake product?
Click to expand...
Click to collapse
did i miss something? which fake are you talking about?
h4rex said:
could someone tell me the differences between the original and the fake product?
Click to expand...
Click to collapse
Not too sure, more than likely you will get what you pay for. Stick to the original
Dlog said:
It was fine for almost a year.
And it's saved my phone multiple times from being damaged in drops.
So don't get me wrong, i really like it!
But the cracks are there...
Click to expand...
Click to collapse
didn't got you wrong m8 just wanted to mention, that i don't have them. maybe i'm just lucky
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
So today i have finally broke my phone I am currently phoneless until my replacement screen comes in so i will be going phoneless from here until atleast 4/20!! So i would like to describe what happened. Usually this phone is a tank and i can drop it 1 million times without it breaking until today happened. I was already having a really bad day i woke up late in the morning and almost missed my bus. i went to school looking like trash and then i end up going through the whole day with a really bad headache. I had to deal with a horrible mat teacher who gave me a (no joke) 66.60 for the marking period. half the class failed. So whatever i dealt with her then i went through my day until i was in my last period class. i was wearing gym shorts today so my pockets were really loose and i had my phone in my right pocket. I was sitting in a chair that was 2 feet off the ground and BAM my phone smashes into the floor. At this point I'm like "oh crap its done" so i flip it over and there was only a tiny crack in the top left hand corner so im like oh okay no biggy I can deal with that. That wasn't the worst of it. The screen powered on perfectly fine nothing looked wrong however only one half of the touch screen worked. Touching the screen anywhere under the power button wouldn't work. Running a DPI of 420 puts 2 essential things right in that exact area (dpi wont matter for the second thing) 1. My lock password is toast so i cant unlock my phone 2. even if i could unlock my phone (some cases i was able to unlock my phone but it works for 5 seconds then stops) the nav bar lives in that zone so im screwed. I just find it funny how a tiny drop can be so fatal and disable half a screen while i drop my phone daily from many different heights and thee wort it got was a scratch. I'm curious what are your drop stories?????
PS. if you don't see me participate in the threads I usually stalk its because I prefer to browse and post to XDA from XDA Labs. The website sucks.
I have repaired my phone and ordered the black dualpro or whatever its called case by insipio I ended up getting it for $25 should be here in a few days the company who ships it is very reliable
photos to follow within the week
Same thing happened to me. But replacing the screen on these is really easy, provided you get the screen/digitizer and frame assembly. Ijust did mine last week. Now i wont take off the case again. I have never cracked a screen until this phone. But up and going again.
planedoc said:
Same thing happened to me. But replacing the screen on these is really easy, provided you get the screen/digitizer and frame assembly. Ijust did mine last week. Now i wont take off the case again. I have never cracked a screen until this phone. But up and going again.
Click to expand...
Click to collapse
Yeah i noticed how easy it is! i should be getting my replacement display (with frame) and phone tools anywhwere between now and may 1st
WelcomeToTheSkye said:
Yeah i noticed how easy it is! i should be getting my replacement display (with frame) and phone tools anywhwere between now and may 1st
Click to expand...
Click to collapse
Can you link from where u ordered your screen ?
Simple lesson: keep it in a case
Sent from my XT1572 using XDA-Developers mobile app
Jay794 said:
Simple lesson: keep it in a case
Sent from my XT1572 using XDA-Developers mobile app
Click to expand...
Click to collapse
Maybe if you just got black or something. Some of us customized them in Moto maker or skinned them. It would be useless to cover it up and I don't like the clear cases. Sure you have to be careful but you really should even with a case. The thing is accidents happen and a case isn't a guarantee that the phone won't break anyways.
Jay794 said:
Simple lesson: keep it in a case
Click to expand...
Click to collapse
If only they weren't so ugly for this phone. Good thing I take care of my stuff...
@WelcomeToTheSkye Sorry to hear about your phone. And your class. I was so scared I was gonna drop my MXP until I got a case. I was expecting the rubber on the back to be grippy but mine is slippery compared to my old moto E and the metal makes it worse. If you'd like a case recommendation, I have the Diztronic case and the Incipio Octane. They're both good. The octane looks better because it lets you back material show through and it adds more grip, but the headphone port cutout isn't big enough for my ATH-M50s
The Diztronic is really really nice. It just doesn't add as much grip. The buttons are also really easy to press. It's the one I usually use.
Jay794 said:
Simple lesson: keep it in a case
Click to expand...
Click to collapse
i have never been a case person... i break all the cases i ever get... plus all the cases (beside the incipio brand) suck for this phone
elite001mm said:
@WelcomeToTheSkye Sorry to hear about your phone. And your class. I was so scared I was gonna drop my MXP until I got a case. I was expecting the rubber on the back to be grippy but mine is slippery compared to my old moto E and the metal makes it worse. If you'd like a case recommendation, I have the Diztronic case and the Incipio Octane. They're both good. The octane looks better because it lets you back material show through and it adds more grip, but the headphone port cutout isn't big enough for my ATH-M50s
The Diztronic is really really nice. It just doesn't add as much grip. The buttons are also really easy to press. It's the one I usually use.
Click to expand...
Click to collapse
Yeah i might end up going with the incipio duo thingy lol the one with two layers soon... im just not a case person... thanks for the recommendations
WelcomeToTheSkye said:
i have never been a case person... i break all the cases i ever get... plus all the cases (beside the incipio brand) suck for this phone
Click to expand...
Click to collapse
I got a pretty nice looking carbon fibre look case off eBay for less than £5 and it's saved my phone no end of times, if you go caseless and your phone breaks you only have yourself to blame
Wallet cases are also a great way to protect your phone/screen. I looked around on Amazon for a while and the only well reviewed one was the one by a company called J&D. I purchased it in turquoise and paired it with the Pleson tempered glass screen protector and the only downside is that all tempered glass protectors for this phone come up a little on the sides due to the curved screen but otherwise this is a protective and attractive combination.
Sent from my XT1575 using XDA-Developers mobile app
WelcomeToTheSkye said:
So today i have finally broke my phone I am currently phoneless until my replacement screen comes in so i will be going phoneless from here until atleast 4/20!! So i would like to describe what happened. Usually this phone is a tank and i can drop it 1 million times without it breaking until today happened. I was already having a really bad day i woke up late in the morning and almost missed my bus. i went to school looking like trash and then i end up going through the whole day with a really bad headache. I had to deal with a horrible mat teacher who gave me a (no joke) 66.60 for the marking period. half the class failed. So whatever i dealt with her then i went through my day until i was in my last period class. i was wearing gym shorts today so my pockets were really loose and i had my phone in my right pocket. I was sitting in a chair that was 2 feet off the ground and BAM my phone smashes into the floor. At this point I'm like "oh crap its done" so i flip it over and there was only a tiny crack in the top left hand corner so im like oh okay no biggy I can deal with that. That wasn't the worst of it. The screen powered on perfectly fine nothing looked wrong however only one half of the touch screen worked. Touching the screen anywhere under the power button wouldn't work. Running a DPI of 420 puts 2 essential things right in that exact area (dpi wont matter for the second thing) 1. My lock password is toast so i cant unlock my phone 2. even if i could unlock my phone (some cases i was able to unlock my phone but it works for 5 seconds then stops) the nav bar lives in that zone so im screwed. I just find it funny how a tiny drop can be so fatal and disable half a screen while i drop my phone daily from many different heights and thee wort it got was a scratch. I'm curious what are your drop stories?????
PS. if you don't see me participate in the threads I usually stalk its because I prefer to browse and post to XDA from XDA Labs. The website sucks.
Click to expand...
Click to collapse
Make sure you head over to https://forums.lenovo.com/t5/Moto-X-Pure-Moto-X-Style/bd-p/449 before having Moto Mobility work on it. There's some disagreement over whether it's a scam or negligence, but either way you're in for a lot of trouble.
I don't use a case either because it makes the phone too large for a pocket. Too bad Moto didn't put a rim around the glass like every other Chinese and Japanese phone has. I guess they wanted the iPhone look with a minimalist white face and a cracked screen.
kevinmcmurtrie said:
Make sure you head over to https://forums.lenovo.com/t5/Moto-X-Pure-Moto-X-Style/bd-p/449 before having Moto Mobility work on it. There's some disagreement over whether it's a scam or negligence, but either way you're in for a lot of trouble.
I don't use a case either because it makes the phone too large for a pocket. Too bad Moto didn't put a rim around the glass like every other Chinese and Japanese phone has. I guess they wanted the iPhone look with a minimalist white face and a cracked screen.
Click to expand...
Click to collapse
I repaired it myself! Everything works perfectly...
Sent from my XT1575 using XDA Labs
Im having the same issue,Dropped the phone bought a replacement screen since motorola wants to charge me 250 bucks JUST FOR THE SCREEN but the worst part about all of this is when i removed the phone back i couldnt remove the screws because most of them are stripped :'(. so now im stuck with this phone like this and i dont want to buy a whole new one cause im poor.
pabel101 said:
Im having the same issue,Dropped the phone bought a replacement screen since motorola wants to charge me 250 bucks JUST FOR THE SCREEN but the worst part about all of this is when i removed the phone back i couldnt remove the screws because most of them are stripped :'(. so now im stuck with this phone like this and i dont want to buy a whole new one cause im poor.
Click to expand...
Click to collapse
Same thing happened to me I stripped 6/20 of the screws... Turns out if you rip the screen off by getting a screwdriver under it you can still the stripped screws out of the back frame. It doesn't need all 20 screws it needs the one to hold the motherboard to the screen and at least 8 to keep it in place
Sent from my XT1575 using XDA Labs
pabel101 said:
Im having the same issue,Dropped the phone bought a replacement screen since motorola wants to charge me 250 bucks JUST FOR THE SCREEN but the worst part about all of this is when i removed the phone back i couldnt remove the screws because most of them are stripped :'(. so now im stuck with this phone like this and i dont want to buy a whole new one cause im poor.
Click to expand...
Click to collapse
Everybody says this so I'm betting Leno glued the screws in. It's fixable if it's into plastic. Lift the edge of the screw head with a knife tip as you turn it. Once it's out, clean the threads. Dip a thin wire into plastic welding glue (modeling and pipe glue works) and wet the inside of the screw hole. Clear out any excess glue. Let the glue dry somewhere warm for at least an hour. The screws should fit now.
Can you post a link to the replacement you got? I bought one of the higher priced ones on ebay and have had three with screen issues. The seller just wants to refund me at this point, so I need to find one that will not have light bleed, dead pixels and an unresponsive screen. Thanks in advance!
I am not recommending anyone do this and am not responsible if you mess your phone up. but this worked For my stripped screw. Replaced my screen today. One screw stopped I drilled the head of the screw out. I used a left handed bit because you drill in reverse with these and if the bit grabs it may unscrew. May but didn't. It made me very nervous but worked. And the part of the screw that was left in didn't matter since I bought the screen with the bezzle/frame. And I had a extra screw same size. It was Philips head but worked. There is a good chance if you try to drill out your stripped screws you will completely brake your phone. But there is that small chance for success?