Related
Hi,
Can someone post some high resolution photos from Nexus one sleeve included in the package?
How good is the sleeve and whether it protects the phone in case it hit the desk or when it is in our jeans pocket?
Thanks
I dropped mine on a hard floor from about 4 feet. The sleeve saved it but it still sounded scary. I'm still waiting for my silicone case to arrive.
The sleeve is nothing special. It's neoprene, perhaps 5mm.
legolas.w said:
Hi,
Can someone post some high resolution photos from Nexus one sleeve included in the package?
How good is the sleeve and whether it protects the phone in case it hit the desk or when it is in our jeans pocket?
Thanks
Click to expand...
Click to collapse
I can say that it works very well as far as protecting your phone. I have a N1, but my cousin was trying to see if her Sprint Hero could fit in the sleeve and just when she put it in the sleeve, it fell on the floor. We slid it back out of the sleeve and apart from the battery door popping off, and we snapped it back on, all was well.
I have been using it and it seems to work well enough. It is slim and has the cute android on one side. I'm going to put the Zagg body protector when it comes out in conjunction with the sleeve.
Thank you all for the replay. I think I will stay with Clear-coat screen protector and the sleeve. but can anyone please post a photo of the sleeve ?
specially when the cell phone is inside the sleeve. I want to know whether the sleeve fully covers the phone or the phone is taller than the sleeve.
Thanks
It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink
It's like the Body Glove mobile phone cases... Nice and compact..
I took a quick video clip of around the case and a frame grab here showing the depth of the phone in the case
http://tinypic.com/player.php?v=4so9ib&s=6
SystmDcln said:
It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink
Click to expand...
Click to collapse
Hey, that's a really nice case! Thanks for the pic!
I like the little Android on it. I wish Google would make an actual case to carry on your hip with that on it.
Bicster_ said:
I dropped mine on a hard floor from about 4 feet. The sleeve saved it but it still sounded scary. I'm still waiting for my silicone case to arrive.
The sleeve is nothing special. It's neoprene, perhaps 5mm.
Click to expand...
Click to collapse
The same thing happened to me. i dropped mine but it wasnt 4 feet and the phone came out alright. like you said it was scary.
The case is nice, it is slim and cushy. That said I don't think it will protect it from serious falls. If you are careful its nice, it slips in and out easily and doesn't add much width of it at all.
I will be looking into other things as well...that you don't need to remove in order to use the phone but we will see. I hate adding width to the phone at all
The sleeve is just OK for now, until better protective cases hit the market!
Thanks everyone for sharing the pictures and your thought.
SystmDcln said:
It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink
Click to expand...
Click to collapse
Thank you for the photo,
is this taken with the Nexus one highest camera resolution?
NPS_CA said:
It's like the Body Glove mobile phone cases... Nice and compact..
I took a quick video clip of around the case and a frame grab here showing the depth of the phone in the case
http://tinypic.com/player.php?v=4so9ib&s=6
Click to expand...
Click to collapse
The video is amazing, thanks for sharing it.
I am waiting for my N1 . Hope it arrive soon :d
does a decent job of wiping the screen off as you push it in and pull it out if you put some pressure on the front
milkham said:
does a decent job of wiping the screen off as you push it in and pull it out if you put some pressure on the front
Click to expand...
Click to collapse
this is what i like most about it
I think the sleeve does it's job, however I cannot hear my phone calls very well when it's in the sleeve, and if your trying to answer a call when you do actually hear it you have to hustle to remove it from your pocket and try to get it out of the sleeve to answer the call. It's tricky. I cannot wait for the 2 docking stations that are coming out at the end of the month. One for the desktop and one for the car. Both will use the little gold contacts on the bottom of the phone. So you do not have to use a docking station with a damn micro usb sticking out of the docking station, you will be able to just set your phone onto these stations, and it will charge without connecting anything.
tommyarmour said:
I cannot wait for the 2 docking stations that are coming out at the end of the month.
Click to expand...
Click to collapse
Eh, who said anything about them coming out at the end of the month? They haven't been announced at all, much less given release dates. We only know about them because they passed through the FCC.
From my past experiences ...
... Just wanted to share this: I have had several similar sleeves that came with phones I have had in the past and here are common problems I have found with them:
(1) Most of them use glue in addition to stitching in their construction. After months of use (and possibly from body heat if commonly stored in pocket), the glue starts to marr the phone
(2) Most of them have nice soft OUTER finishes but not so on the inside. This is true for the N1 sleeve too. Feel the roughness of the edges and sides on the inside ... not sure anyone would really want their phone sliding up and down on that especially if the sleeve is snug.
(3) Most of them tend to double as screen cleaners if used a certain way (either on the inside or using the outside), but end up leaving surface scratches in the long run.
(4) Even the best of screen protectors tend to affect the screen resolution and/or viewing angle even if just slightly.
Granted that these experiences ranged over several manufacturers (Sony Ericcson P series, HTC, etc) and several skins/screen protectors, but I have now built up my knee-jerk reaction of a shudder everytime I think of a sleeve or a screen protector .... of course, thats just me
Just my two cents ....
On a side note, I am in search for a vertical flip style ("book style") for my N1.
I guess my logic is this: protect when not in use, but let me have the best resolution when IN use ... in case anyone knows of a good one, please let me know?
Thanks!
I do industrial type work, and i do a lot of climbing which usually involves leaning to sturdy myself while using my arms. This makes for a lot of broken phones, which wasnt a huge deal until 3g service actually arrived. I need something very rugged, that could support the weight of a grown man that i could slide the phone in. it has to clos so the phone cant fall out while climbing. i was thinking of getting fabricated, but i'm sure i'll have much reduced signal through a little steel box.
Are there any carbon, or some kind of signal friendly metal solution that is as rugged as i'm looking for? doesnt have to be for my i9000 specifically, it could be bigger. as long as the phone fits in it, i can fill the rest with foam and velvet or something. I have actually been wearing a fanny-pack so i can move the phone away from my hips, but not only do i look like a tosser, but i know i'll still crush the screen eventually
Thanks,
perv
Carbon is also conductive. I'd think polycarbonate (lexan) may do what you want if supported all around, and something to keep the glass away from the phone (so it needs to bend quite a bit before hitting the phone).
The antenna is in the bulge at the bottom; keep that behind plastic, not metal.
What about a ring of U profile with lexan glued to both sides? Make one side removable so you can take the phone out. The phone, when in the U, will be the thickness of the U away from the lexan.
check for Hama NaviBag Universal, S2
think this is quite a protection...
I actually started making something out of 5mm lexan. i dont have a bending heater, so its bulky, but it does what i need, despite it being ugly. I think if i change to rivets instead of little bolts, and toss some leather on it, it'd end up looking alright even though its big. Thank you both for your replies
Otterbox has defender out for galaxy s new yaer
Not sure, but this may fit the trick
Can't post url's yet, so covnert to http....
www<dot>pelican<dot>com/cases_detail.php?Case=i1010
Anyone found a suitable armband to go running/work out in while keeping my lovely g2x safe and sound from falling out or getting my sweat all over?
or if you have a universal sized armband and are having success with your g2x in it please do share your experiences!
EDIT:
Review of the VanGoddy Armband: http://forum.xda-developers.com/showpost.php?p=14056733&postcount=16
Check Amazon.
http://www.amazon.com/gp/aw/s/ref=is_box_/181-1178860-7666418?k=g2x+arm+band
Check out the third choice . LOL
Sent from my LG-P999 using XDA Premium App
KRAZYADROIDMASTER said:
Check Amazon.
http://www.amazon.com/gp/aw/s/ref=is_box_/181-1178860-7666418?k=g2x+arm+band
Check out the third choice . LOL
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
[email protected] choice!
yea i looked at those armbands that are on amazon and I am not too wild about them... right now my biggest candidate is the adidas miCoach armband...
http://www.google.com/products/cata...=X&ei=chXSTZDEJoWftwfhsOyXCg&ved=0CG0Q8wIwAA#
though it is nylon and i dont know how i feel about nylon... i would prefer neoprene...
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
kev0153 said:
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
Click to expand...
Click to collapse
Well I am going to take one for the team, I ordered the one that amazon has listed with the ONE bad review... for 17 bux shipped so its whatever...
i went to best buy today and opened a bunch of boxes of stuff and nothing seemed to really fit... i tried the miCoach for the IP4 and it was a huge fail
I pondered using my tunebelt from my nexus one and just getting a different silicone case but with the phone being as big as it is and 12 grams heavier that it may be a little too flimsy and flopping around for my liking...
I want something with the form factor that the amazon armbands or miCoach has where the phone fits into a sleeve and wont flop around... assuming the phone does not stick out literally an inch and the phone will stay in when I am jogging or doing plyometrics, i will be happy with my purchase...
full review to come when i get it...
Thanks looking forward to the review.
Sent from my LG-P999 using XDA Premium App
kev0153 said:
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
Click to expand...
Click to collapse
yup... looking for a perfect fit one too.
Try sports authority
shopcity said:
Try sports authority
Click to expand...
Click to collapse
I dont have sports authority and ****'s said they only carry ipod accessories, specifically nano armbands... its more of a bestbuy type of store's job to carry smartphone sports armbands since they actually sell the devices... ipods are a little more universal so ****'s carrys them...
kev0153 said:
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
Click to expand...
Click to collapse
I have the exact same problem the only armband that I found on Amazon supposedly sucks doesn't even fits the entire phone
I'm subscribing to this thread hopefully I'll find something nice
JHaste said:
Well I am going to take one for the team, I ordered the one that amazon has listed with the ONE bad review... for 17 bux shipped so its whatever...
i went to best buy today and opened a bunch of boxes of stuff and nothing seemed to really fit... i tried the miCoach for the IP4 and it was a huge fail
I pondered using my tunebelt from my nexus one and just getting a different silicone case but with the phone being as big as it is and 12 grams heavier that it may be a little too flimsy and flopping around for my liking...
I want something with the form factor that the amazon armbands or miCoach has where the phone fits into a sleeve and wont flop around... assuming the phone does not stick out literally an inch and the phone will stay in when I am jogging or doing plyometrics, i will be happy with my purchase...
full review to come when i get it...
Click to expand...
Click to collapse
What case do you have?
I want to have a good case that hopefully also fits in a good armband
Let me know if you find a good combination please I'd appreciate it
Here is a list of armbands I found on Amazon, I think the only solution would be to buy a an armband not designed specifically for the G2X and see which one adapts the best
http://www.amazon.com/gp/search/ref=sr_nr_i_1?rh=k%3Acell+phone+armband%2Ci%3Amobile&keywords=cell+phone+armband&ie=UTF8&qid=1306020133
http://www.amazon.com/iArmbands-Arm..._1_7?s=wireless&ie=UTF8&qid=1306060005&sr=1-7
Found this one: http://www.amazon.com/Elegant-Armba..._14?s=wireless&ie=UTF8&qid=1306075830&sr=1-14
Zspy1985 said:
http://www.amazon.com/iArmbands-Arm..._1_7?s=wireless&ie=UTF8&qid=1306060005&sr=1-7
Click to expand...
Click to collapse
the band is too thin, that phone would flap all over the place with a phone our size... bands with a sleeve are better in terms of comfort and stability
omarsalmin said:
Found this one: http://www.amazon.com/Elegant-Armba..._14?s=wireless&ie=UTF8&qid=1306075830&sr=1-14
Click to expand...
Click to collapse
yea that is the one i ordered that got the couple of bad reviews...
I just got it in the mail yesterday but I was not home to use it, I will take it out for jog tonight and do a full review with some pictures
JHaste said:
the band is too thin, that phone would flap all over the place with a phone our size... bands with a sleeve are better in terms of comfort and stability
yea that is the one i ordered that got the couple of bad reviews...
I just got it in the mail yesterday but I was not home to use it, I will take it out for jog tonight and do a full review with some pictures
Click to expand...
Click to collapse
Thanks for your upcoming review I appreciate that
Ok so here is my review of the VanGoddy Armband for the G2x/O2X/EVO4g/Atrix/any other giant ass phone!
(Picture album is linked on the bottom of the post)
First off I would like to state what sort of view I am coming from as to eliminate any bias by stating my biases from the get go. I am a slim, athletic body type, 14 inch biceps, 6 foot, 160 pounds. I typically will be doing a lot of running with this device and I referee soccer and will often strap it on while I run a game so I can track my positioning, distance, ect. so I wanted a band that would not be too gaudy and I could hide a bit under my sleeves (underarmor and uniform sleeves). Since again running was my main use with some use in the gym I wanted stability while holding the device so it was not sliding around, flopping around or possibly flying out of the pocket. The other main feature I was looking for was material quality and anybody that works out knows neoprene is clutch especially for people who sweat a large amount, like myself, when I work out or go running. Tad bit of personal information for ya there!
The unboxing and first impressions: VanGoddy shipped it in a bubble wrap envelope, nothing fancy and the item did not need anything fancy. Right away when I looked the thing over I could tell that the pocket to hold the phone looked a tad large for my phone and that the plastic screen was cheap and small. Just putting the armband on, I put it on as tight as I could get the velcro to go and it was a perfect fit, very snug and even tighter when I flexed how my arms would be while running.
Upon slotting the phone in I noticed two things, the clear screen cover does in fact suck, and the phone will fall out of the slot naturally. The device was definitely made with a "universally wide" pouch and I would argue favors the wider phones such as the Atrix, Evo4g and DX; our slim phones got the shaft in this design. I put the armband back on, tightened up, even loosened it a hair from where I had it last time and boom! it actually felt pretty good. Swinging my arm around the phone was pretty snug, I could not get it to fall out regardless of what I was doing which earned it some "do points" in the do or die ratings! I would clear this for use in the gym for bench pressing and doing other strange arm angle lift routines.
Onto the screen cover. This was my biggest grip with this thing. You do not get a lot of cover real estate to work with and the way the cover was stitched into the armband was absolutely thoughtless because it does not even come close to sitting flush with the screen. The part that is stitched around the screen on the outside is a flexible plastic and on the inside they overlapped material so that the screen is not sitting against the plastic cover screen. (See picture overlap flap) This caused another problem that annoyed me a little, if the phone shifted in the slot too much to one way or the other the edge of the phone would get caught on one of these flaps on the inside around the screen edge and offset the phone. It did this twice during my little 3 mile jog while I was trying to skip a song. Getting to the notifications bar while in the slot is damn near impossible, I had no trouble hitting the softkeys but the notification bar is inaccessible. This is partly due to the long "ass" our phones have so the top part of our screens will not be within the clear cover's viewing range.
I did and do not play with the phone much while running because I have very satisfying playlists. Handling touches through the screen was about on par with other covers of similar thickness. I did not really have a problem executing touch commands but changing the volume was a little weird since I had to essentially just squeeze and guess where the volume buttons were on the side. On the bright side, because the screen is not very tight to the screen and the neoprene resists water, I never noticed the screen to fog up on me.
All in all for $17 something cents shipped this is not a terrible armband by any means. It is no 30-40 dollar custom phone fitting armband but it is not so cheap that I just pitched it laughing at what I bought, I would say I got what I paid for and maybe a bit more. Score wise I would give this guy a 7/10. It is good but it definitely has some shortcomings. If you are skinny and dont have at least a 13inch bicep I would not recommend you purchase this device, for fear of it sliding off of your arm. Get used to running with this on your left arm, I found the cord positioning much better and it was getting tangled less around my arm.
Some things I would have liked to see and would be a more quality screen cover. A bit more velcro (one more inch) to possibly go tighter for maybe some more extreme sports or intense working out and for smaller biceps. A slot for a Key is always a nice addition but I usually find a place in whatever pair of shoes I have; sliding it behind the phone you would risk it flying out, I would bet money that it flies out on smaller biceps.
If you are looking for something to get the job done then this is the device for you because it does exactly that. It does not do it extremely well, wow, or impress me in any way but it for 17 bucks it served my needs. Again 7/10 from me...
Pictures: https://picasaweb.google.com/108804...?authkey=Gv1sRgCMyb25S03-aJDw&feat=directlink
Enjoy and Thanks for reading!
thanks for the great review. It sounds like this is the best one out there right now.
Just bought one, hopefully it will be sufficient. Just need it to keep the thing dry
swampthing1224 said:
Just bought one, hopefully it will be sufficient. Just need it to keep the thing dry
Click to expand...
Click to collapse
I dont think you will have any problem keeping it dry, just make sure nothing from your shoulder or upper arm drips down since the top is open
http://www.amazon.com/iGadgitz-Resi..._1_4?s=wireless&ie=UTF8&qid=1306182082&sr=1-4
found this one but it's out of stock. try emailing the seller?
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
Hi guys, I'm sure you've seen quite a few pictures of those accessories, so I thought I'd post here a few images from very close to some details so you can have a good idea of the finish, etc.
Also a small comparison with an official case (nylon one). I've ordered a skin for it, but it was on preorder and just started shipping today.
Sorry for the lint on some pictures, it does catch it ^^
As for my opinion (one more of those), well the case does feel real good in hand, the phone feels really safe in there. The buttons are real good (miles better than Rhinoshield bumper). Only thing is that the fingerprint scanner is deep and in a small window, so must get a little used to the feeling of really accurately put the finger in there. And is it grippy ? Is fine! a bit better than the official case but not by super much.
Prism is also good, easy to install. Biggest critic is how sharp the edges are (you can see on the pictures). If you don't use a case, you'll feel them and I'd be afraid to lift it by mistake, not sure how securely it sticks. The feeling is like glass, I was using the phone naked previously and no problem with that. Also, it does not affect the screen, I think ; some peops say it makes the screen cloudy, but I do not notice.
Worth the price ? Hmm those things are a rip off no matter what. But they are both good quality products, and the glass screen protector without a black border is a real step up ^^.
There you go!
Thanks for sharing! Would you recommend dropping $$$ on this combo?
silent_freak said:
Thanks for sharing! Would you recommend dropping $$$ on this combo?
Click to expand...
Click to collapse
Well, all in all, it is near 60 USD.
The case is good I think, feels good and will protect the phone that's for sure, so if you don't have anything like that, it is a good buy. I also have an official OP cover and the main difference is that the Dbrand case has raised edges.
The glass, while it is good, is not as ground breaking as I imagined (Dbrand's marketing team is good ^^). The plus is that it feels like glass and does not have a black border, is as fingerprints resistant as the bare glass or the official screen protector. The bad is that the glass as you can see on the pictures is really only on the screen and has sharp corners, so you feel it when doing gestures, unless you use a case (because then your finger does not slide from the farther edge of the phone, if you see what I mean).
So out of the two, I would say the actually real good product is the case.
The case looks too bulky to me. I prefer the slimmer ones like the official protective sandstone or the karbon bumper, which are really well made. But I guess it depends on the environment you're working in (etc) which affects the danger your phoneis in, in which case, if it's a place you can easily damage it, this type of case can save you good money on repairs. The prism looks really durable from what I've seen online and I believe you get 2 in the box if I'm not mistaken, so if that's true, that's a big plus over rhinoshield's overpriced 1x black bordered piece of crap that covers at least 1mm of screen on each side, forcing you to just take it off minutes after installation and breaking it in anger.
Anyway, thanks for giving us a look at dbrand's new products. Was really looking forward to seeing someone talk about that.
dragos281993 said:
The case looks too bulky to me. I prefer the slimmer ones like the [...] Was really looking forward to seeing someone talk about that.
Click to expand...
Click to collapse
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.
kipue said:
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.
Click to expand...
Click to collapse
I dropped my OP6 from approximately 2.5meters from the locomotive's door and the phone miraculously survived with the karbon case having one nick in the top right side corner and surprisingly that disappeared after a few days. Very impressive quality. I was also very lucky, I guess, considering the height the phone fell from. THEN I got the bumper case from Rhinoshield along with the garbage black bordered glass. I broke the glass in half after basically donating money to them because that glass was not worth the price, but that was that. I put their bumper on my phone and left it there for a few days. ****ty buttons, poor quality material and slippery too, like a hard plastic you find in those kitchen accessories, but whatever, I liked the alert slider one. Then one day I got in my car and the phone fell from my pocket on concrete (or asphalt) and because it happened right at the edge of the road, one hard little rock managed to touch the edge of the screen at impact and cracked the screen on the middle right side with the crack starting from the bottom and ending in a "C" shape 2 or 3 centimeters above. So it's still ok but the start of the crack can be felt at touch so that's a bummer.
And in the end I could've given the money to the old lady beggar at the corner of the street instead of giving it to Rhinoshield for 2 absolutely rubbish products they made such a big fuss about.
Never again I'll buy from them. Dbrand's products seem a bit different though especially that prism. I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.
dragos281993 said:
I dropped my OP6 from approximately [...] . I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.
Click to expand...
Click to collapse
Yeah, as usual those things are very often quite a leap of faith. We want to believe that the more expensive it is the better it will be but the truth is that it's probably the same or close to the same with a different packaging :angel:
But need a screen protector at least to maintain the resell value of the devices.
I'll say again, prism is a good one but not perfect (like none of them is).
Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.
ahagersr said:
Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.
Click to expand...
Click to collapse
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in there so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out of their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.
kipue said:
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in the so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out if their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.
Click to expand...
Click to collapse
Thank you very much for your time!
ahagersr said:
Thank you very much for your time!
Click to expand...
Click to collapse
Sure, no problem.
So here are a few more. The last one is to show how the phone screen does not touch a flat surface when it is put face down. It's blurry but you'll get the idea.
Also some lint, not fighting that anymore