[Q] Ultra Rugged Holster - Galaxy S I9000 Accessories

I do industrial type work, and i do a lot of climbing which usually involves leaning to sturdy myself while using my arms. This makes for a lot of broken phones, which wasnt a huge deal until 3g service actually arrived. I need something very rugged, that could support the weight of a grown man that i could slide the phone in. it has to clos so the phone cant fall out while climbing. i was thinking of getting fabricated, but i'm sure i'll have much reduced signal through a little steel box.
Are there any carbon, or some kind of signal friendly metal solution that is as rugged as i'm looking for? doesnt have to be for my i9000 specifically, it could be bigger. as long as the phone fits in it, i can fill the rest with foam and velvet or something. I have actually been wearing a fanny-pack so i can move the phone away from my hips, but not only do i look like a tosser, but i know i'll still crush the screen eventually
Thanks,
perv

Carbon is also conductive. I'd think polycarbonate (lexan) may do what you want if supported all around, and something to keep the glass away from the phone (so it needs to bend quite a bit before hitting the phone).
The antenna is in the bulge at the bottom; keep that behind plastic, not metal.
What about a ring of U profile with lexan glued to both sides? Make one side removable so you can take the phone out. The phone, when in the U, will be the thickness of the U away from the lexan.

check for Hama NaviBag Universal, S2
think this is quite a protection...

I actually started making something out of 5mm lexan. i dont have a bending heater, so its bulky, but it does what i need, despite it being ugly. I think if i change to rivets instead of little bolts, and toss some leather on it, it'd end up looking alright even though its big. Thank you both for your replies

Otterbox has defender out for galaxy s new yaer

Not sure, but this may fit the trick
Can't post url's yet, so covnert to http....
www<dot>pelican<dot>com/cases_detail.php?Case=i1010

Related

[Q] The most suitable case for protection when phone drop?

Hi!
What is the most suitable case for protection when phone drop?
Definitely Case Mate
http://www.case-mate.com/Samsung-Ga...ung-Galaxy-S-T-Mobile-Vibrant-Tough-Cases.asp
victor79 said:
Definitely Case Mate
case-mate .com/Samsung-Galaxy-S-T-Mobile-Vibrant-Cases/Case-Mate-Samsung-Galaxy-S-T-Mobile-Vibrant-Tough-Cases.asp
Click to expand...
Click to collapse
Or this case is better? (otterbox)
otterbox .com/Samsung-Galaxy-S-Commuter-Series-Case/SAM4-GALXS,default,pd.html?dwvar_SAM4-GALXS_color=20&start=1&cgid=samsung-galaxy-s-cases
demandware. edgesuite .net/aaez_prd/on/demandware.static/Sites-otterbox_us-Site/Sites-masterCatalog_OtterBox/default/v1295635693828/pdfs/sam4-galxs-info.pdf
how do you think?
+1 for Case Mate, I'm using one and it is very solid and durable, not sure about the otterbox but the Tough Case of Case Mate have many good reviews. Only one down side of it is that switching in/out battery more difficult but I see that the thing I have to pay for the good protection
Case Mate rocks!
Even a Case Mate "Barely There" is good enough for a drop on a even surface. No contact with the screen and the frame if dropped. Happend to me very often.
Saves a lot of money: http://www.amazon.de/Silicon-Samsun...9MU6/ref=sr_1_2?ie=UTF8&qid=1295719519&sr=8-2
It looks a bit luxury at the backside, like juwels. It's glossy but not slippery at all. Very handy as the Galaxy without any case is extreme slippery. It doesn't collect any dust and the screen is protected by the overlapping flange at the front.
Doesn't look like an old truck tire like Case Mate but it's a quiet well protection as I experienced when dropping my Galaxy often enough in my workshop.
How are the Cheap silicon cases ?
In india we dont have Anycall or otter cases.Could only find Case-mate tough and barely there on ebay.in.
Superuser_x said:
How are the Cheap silicon cases ?
Click to expand...
Click to collapse
Mine fits absolutely satisfying. No spaces between phone and cover, but you can rip it off by one turn with the hand.
The only thing where you feel that it is cheap: there is a (very small) welding seam around as it's made of two halfs. You can use a razor blade to get rid of, very easy.
In india we dont have Anycall or otter cases.Could only find Case-mate tough and barely there on ebay.in.
Click to expand...
Click to collapse
Unfortunately...
http://shop.ebay.in/i.html?_nkw=(i9...ilicon*&_osacat=0&_trksid=p3286.c0.m270.l1313
Some others are available, but very soft. But better than a crashed phone.
Maybe you can try to order in US or China. But there is absolutely no warranty to receive it...
How is this one, let me know your comments on this please - amzer.co.in
(iam sorry i cant paste the exact link due to new user restrictions)
if u can browse thru this website and look for the- silicone jelly case for samsung galaxy.
Mentioned one of these?
http://www.amzer.co.in/Amzer-Silicone-Skin-Jelly-Case-Grey-P88766.htm
http://www.amzer.co.in/Amzer-Luxe-Argyle-Skin-Case-Clear-P88794.htm
It's round about 5 bucks, so worth a try. At my point of view they will fit like many others.
One thing I would care about - hopefully feeding the paranoia troll only: in Germany we have very strong investigations in materials. Most cheap plastic are somehow unhealthy. Certain substances (lets name it flexibilizer) are able to leave the plastics and join thru your skin and might be able to damage genome or chromosome set and might cause something like growing boobs where non have to be or what ever. Especially if you are holding that plastic lots of time in sweaty hands.
Kind of a rule: more soft -> more "unhealthy". Depends on material quality.
So, when playing around a long time e.g. while flashing and configure it at home: pull the cover of.
Could not help laughing on that " Growing Boobs" thing.
But on a serious note, well i think you are right as Ive heard about cancers arising from long use of cheap quality plastic.
But i think i will try this.Going for the Green one
Going for the Green one
Click to expand...
Click to collapse
Would be my choice too. Like the eye catcher same as luxury style.
Recommended fashion which meets that style...
http://www.burlington.de/de/men.html
*SCNR*
This might protect the phone from a small drop. But might create a small bulge in your pants (...not in that way).
http://www.easydevices.co.uk/products.asp?partno=OTTBOX26SAMGS&model=
stepsch said:
Mentioned one of these?
http://www.amzer.co.in/Amzer-Silicone-Skin-Jelly-Case-Grey-P88766.htm
http://www.amzer.co.in/Amzer-Luxe-Argyle-Skin-Case-Clear-P88794.htm
It's round about 5 bucks, so worth a try. At my point of view they will fit like many others.
One thing I would care about - hopefully feeding the paranoia troll only: in Germany we have very strong investigations in materials. Most cheap plastic are somehow unhealthy. Certain substances (lets name it flexibilizer) are able to leave the plastics and join thru your skin and might be able to damage genome or chromosome set and might cause something like growing boobs where non have to be or what ever. Especially if you are holding that plastic lots of time in sweaty hands.
Kind of a rule: more soft -> more "unhealthy". Depends on material quality.
So, when playing around a long time e.g. while flashing and configure it at home: pull the cover of.
Click to expand...
Click to collapse
You got it half right - the man boob thing actually happens, but that's not because it goes through your skin. The chemical used to soften plastic are structurally similar to estrogen, which is the hormone responsible for puberty development in females. Prolonged exposure to the chemical can sometimes induce side effects. But that's usually through the mouth instead of through the skin. Human skins are quite resistant against foreign chemicals.
I've read some tests about plastic grips at construction tools, same at childrens toys (similar tests at adult toys). There is clearly written: contact with skin is able to damage whatever.
However, I still prefer estrogen in women.
So, whenever I am home I pull the covers from the phone. (It's also much prettier without any additional cover.)
I am just thinking of a kind of self-adhesive lamination - maybe clear like glas - on the battery cover, so that the phone will be less slippery. That wouldn't make it more stable when hitting the ground, but it wouldn't slip so easy out of your hand.
Unfortunately the round desin of the housing at all isn't very safe to get a good grip. (That's much better at iPhone4.)
I've been looking to buy a CapDase Soft Jacket 2 Expose. (Kindly Google it, as I cannot post external links yet)
I'm yet to find a webshop that will ship it to the Netherlands. Anybody knows one?
Today i recieved my Amzer silicone gelly case.
Looks good, feels good and doesnt burns a hole in my pocket.It has a nice rough finish on the sides for a good grip.Also my SGS feels more sturdy to hold.
Otterbox just outed the commuter for galaxy s
looks better than the casemate toughcase
Definitely Case-mate Tough!!
...omg... you don't really want to pay 35 bucks for a piece recycled truck tyre...
Greetings to India, I like the fresh green. ...and none of the truck tyre fans will steal it.
I do not believe that all those 5 times-more-expensive-protectors are 5x better in use, not even more than 1,1x.
Save your money, buy some nice apk instead.
Btw: ... in a few month there will be a new phone available and it doesn't matter anymore if yours is scratched or not.

[Q] Has anyone ever tried this one-piece skin?

http://www.amazon.com/iNcido-Samsung-Galaxy-Trans-Silicon/dp/B004A9XSR4
I never use my keyboard and I was wondering if this case would be better since it makes the phone sturdier by securing the keyboard and maybe make it a little thinner.
Has anyone tried this case or one like it?
thats extraordinarily stupid.
Kitteh298 said:
thats extraordinarily stupid.
Click to expand...
Click to collapse
The only thing stupid was your post. No call to be so rude in response to a simple question. If you dont use the keyboard I say go for it. I've never used one myself.
Sent from my SPH-D700 using Tapatalk
Looks cool....... I wish they had it in Black......
skyheli said:
Looks cool....... I wish they had it in Black......
Click to expand...
Click to collapse
They have one in black: http://www.amazon.com/iNcido-Brand-...ES/ref=sr_1_36?ie=UTF8&qid=1301021620&sr=8-36.
In fact, I think the cheapest option is to get 5 of them lol: http://www.amazon.com/iNcido-Samsun...C8/ref=sr_1_18?ie=UTF8&qid=1301021593&sr=8-18
I'm still on the fence on this, but even if they suck, it's still less than $10 down the drain.
Unfortunately, having just bought one of the black cases above, I can say that it is absolutely, positively, NOT "one-piece". It's a standard 2-piece slider-type case.
Sigh. (sadly tosses one more case onto the growing pile of unloved cases on my dresser)
Case history so far:
Seidio: meh.
Seidio ActiveX: nice hand feel, but a major 5-minute pain to disassemble the phone when the battery dies after 4 hours, and makes it impossible to use the camera button without shaking the phone.
Aluminum Milano: would rock, if it were made from plastic. When it's closed, the phone is rock-solid, and you'd never even know the keyboard is there. Unfortunately, it's aluminum, and has a family tree that clearly began back when Sprint phones still had real antennas. Putting the phone in it instantly nukes at least one bar, makes bluetooth flaky, and renders the GPS unusable under most circumstances. Worse, the metal picks up stray cat hairs and screws up the touchscreen. As the final deathblow, it covers the top part of the touchscreen, so pulling down the window doesn't work. Totally and completely unusable.
Silicone case from this thread: I can't definitively say I hate it, but I'm still bummed out that it actually IS a 2-piece case. That said, it's nicer than I thought silicone-type cases would be and is fairly easy to remove, so I'll probably keep it on for a few days unless it seriously annoys me in some as-yet unforeseen way. However, the sides are totally unsecured, and I have a hunch my back pocket isn't going to be kind to it.
It'll be just my luck that someone will finally come out with a plastic Milano, or a one-piece silicone case, two weeks after I've already bought my next phone in October.
I hear ya brother, why not try one of those skins that protect the phone. I wanna get one but not sure which one.
Sent from my SPH-D700 using XDA App
This case is HORRIBLE.
Its a cheaply cut silicone 2 piece case. With a CHEAP FLIMSY plastic "rail" sliding groove. When I tried to put it on my phone, the plastic rail part broke, and rendered the case useless.
It doesnt fit well, is MUCH to large for the Epic, and feels like cheap silicone.
I returned it to the seller for the $5. Had to pay return shipping too.
Otterbox Commuter all day guys. best case ive found for this phone. adds a lil bulk to it but its tough and comes with a warranty from otterbox. 1 reccomendation tho if you do get the otterbox commuter series, there are 2 clips at the top, bottom and 2 on the left side of the top front piece. BRAKE THE 2 CLIPS THAT HOLD IT IN PLACE THAT ARE ON THE SIDE! It will still stay on your phone without a problem. I learned that those clips on the side will scratch your keyboard up a lil bit but not TOO horrible, they no longer have a glossy look, look more mat finish but luckily the lettering and FN symbol have not scratched off, i however am OCD about this stuff and learned the hard way but for as many times as i drop my phone, hands down best case on the market if your lookin for protection. it's smaller than the bodyglove, atleast to me it seems smaller, and for those of you who NEED to wear it on the side they do have a pouch thatll fit it. I manage a Cell Phone accessory cart in Florida so as an Epic user I'm always lookin and tryin new cases. if you guys have any question about accessories PM me =D
I can vouch for otterbox. I had the defender for my BB tour back in the day and it was amazing, to say the least. I dropped it from chest height (I am 6' 5") and it hit the cement and bounced. Zero damage to the phone itself and only a little scuff on the case. Otterbox is like having your phone inside an Abrams Tank.
-uncut and uncensored from my Samsung Epic 4G
lafronz said:
Originally Posted by jbadboy2007
Guess no one else realizes this but when the 3g or wifi icon change to a color that is when google is accessing your phone.
Click to expand...
Click to collapse
^--------ROFL!!!!
lafronz said:
I can vouch for otterbox. I had the defender for my BB tour back in the day and it was amazing, to say the least. I dropped it from chest height (I am 6' 5") and it hit the cement and bounced. Zero damage to the phone itself and only a little scuff on the case. Otterbox is like having your phone inside an Abrams Tank.
-uncut and uncensored from my Samsung Epic 4G
Click to expand...
Click to collapse
Yeh, but will it make it so you can't feel the flimsy ass screen?
Like the OP, that's all I'm looking for too... I want my phone to feel like it's a nice candy-bar phone, I don't want it to shake and rattle like my screen is about to fall off.
Ordered an Orange one, am looking forward, will review it and lt you know
Sent from my SPH-D700 using XDA App
Got my orange one today and it's pretty cheap but I got it for .98c and after shipping, only 2.75...so that's pretty cheap.
The cutouts are in the right place, it could fit more snuggly if you ask me but the color/ feel is great... will see if I can post pics.
Epic is as Epic does.
Marlinsfan88 said:
Otterbox Commuter all day guys. best case ive found for this phone. adds a lil bulk to it but its tough and comes with a warranty from otterbox. 1 reccomendation tho if you do get the otterbox commuter series, there are 2 clips at the top, bottom and 2 on the left side of the top front piece. BRAKE THE 2 CLIPS THAT HOLD IT IN PLACE THAT ARE ON THE SIDE! It will still stay on your phone without a problem. I learned that those clips on the side will scratch your keyboard up a lil bit but not TOO horrible, they no longer have a glossy look, look more mat finish but luckily the lettering and FN symbol have not scratched off, i however am OCD about this stuff and learned the hard way but for as many times as i drop my phone, hands down best case on the market if your lookin for protection. it's smaller than the bodyglove, atleast to me it seems smaller, and for those of you who NEED to wear it on the side they do have a pouch thatll fit it. I manage a Cell Phone accessory cart in Florida so as an Epic user I'm always lookin and tryin new cases. if you guys have any question about accessories PM me =D
Click to expand...
Click to collapse
ditto , otterbox commuter. FTW
ive had otterbox's on all my androids( and BBs), moto droid 1 & 2 & global, evo 4g, and my epic with zagg invisia sheild. best protection IMO.
wish they had the pink accents for my girls phone, she cant find a case she likes that doesnt feel cheap, or all the design flakes off.
also , thanks for tip about the side snaps, filed mine down with diamond file, (im a locksmith)
PokeAsheep said:
Got my orange one today and it's pretty cheap but I got it for .98c and after shipping, only 2.75...so that's pretty cheap.
The cutouts are in the right place, it could fit more snuggly if you ask me but the color/ feel is great... will see if I can post pics.
Epic is as Epic does.
Click to expand...
Click to collapse
so its a one piece silicon case? like the blackberry ones?

iGadgitz Gym Armband

Hey whats up guys,
I just purchased this item from Amazon.com (http://www.amazon.com/gp/product/B004XYQWXI)
I just got this in the mail today, have not gotten a chance to use it.
I will try to give it my best to review this product.
-Product feels pretty good, solid build quality, doesn't feel like cheap ****
-The phone fits perfectly well if you are NOT using a phone case. I tried to put the phone in with a TPU case, and it did not fit.
-Trying it on my arm, it feels pretty tight and snug. (Not sure if that's how armbands are supposed to feel. My arm feels constricting a bit, I don't think this is feasible if you are going to work out your arms?) ... But I will update this part after I have used it tonight working out my back and biceps.
-There's a cool section for your to put your headphone wire in so it doesnt hang all over the place.
Check out the pictures, I will try to update this more. If you have any questions I can try to answer them here.
Pictures they provided
http://ecx.images-amazon.com/images/I/61lUAoP2bVL._AA1000_.jpg
http://ecx.images-amazon.com/images/I/61xn4vLqIcL._AA1000_.jpg
http://ecx.images-amazon.com/images/I/61jbwjeLLeL._AA1000_.jpg
My pictures, (sorry they were taken with my G2x)
http://imageshack.us/f/534/img20110725152316.jpg/
http://imageshack.us/f/713/img20110725152435.jpg/
http://imageshack.us/f/62/img20110725152449.jpg/
http://imageshack.us/f/580/img20110725152509.jpg/
Thanks for the review...I"m looking forward to your update. I'm very interested in knowing how this will work for you during arms workouts...and how it would appear to hold up to sweat.
On that note, what earpieces do you use that won't break down from sweat quickly?
mmapcpro said:
Thanks for the review...I"m looking forward to your update. I'm very interested in knowing how this will work for you during arms workouts...and how it would appear to hold up to sweat.
On that note, what earpieces do you use that won't break down from sweat quickly?
Click to expand...
Click to collapse
Alright in response on how it felt when I was working out my arms. Either I am not an Armband type of guy (I usually wear a tank top or sleeve cut off shirt). I feel as if this thing gets in the way. Not sure if u guys know what I mean when you work out upper body and u like your arms to be free of anything.
The arm band felt like those things you put on your arm when yhou are testing your blood pressure at the doctor... very tight especially if you are working out your biceps.
I think this is good if you do cardio, or lower body exercises that do not require the use of the arms...
The material was okay in regards of sweat... I did not notice it leaking through and touching my phone at all. I personally thought it was going to be very itchy and annoying like how some kneebraces are now made with that neoprene type of material.
With the headphones, I have some type of rubbery material heaphones. There like 10 bucks or something I dont really care if they get messed up though.
Throughout the whole workout experience I can remember adjusting it almost after every set so it can get comfortable... Towards the end of my work out I just put it in my pants... LOL
So if you are not the arm band type of guy, do not get this. Only use it for cardio exercises or lower body so it wont bother you as msuch as it bothered me working out upper body.
Also the wire management part in the first Amazon provided picture, is VERY small you cant fit fat wires or many layers of wires if you guys understand what i mean...
With the front protector clear plastic thing, it wasn't too bad, basically it kind of felt like those ZAGG invisihields over your phone.
Gave it another go last night working out abs and legs, it didn't bother me as much compared doing upper body.
Sent from my G2x

Cases / Shells - what're you getting / reviews:

Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.

Verticle flip cases, also used as kick stands!

Just wanted to post a couple of links to some great cases.
I have this vertical flip case http://www.ebay.com/itm/Carbon-Fibe...369238?pt=PDA_Accessories&hash=item2314c5e656
and it's perfect. My phone is always protected, even from drops while talking, and I don't need a screen protector. It's also very easy to take on and off for battery changes.
I can fold it backwards like a kick stand to prop my phone up in landscape mode on a table.
It's not magnetic, so no problems with signal.
Throw it in your purse/pocket with the keys. Not a scratch!
I've had it for 7 months and it looks brand new. I'm not going to say it looks like lamb skin but it's much classier than the rubber cases. (It's Carbon Fiber.)
Draw backs:
Looks like an 80's car phone while you're talking because the bottom flap hangs beside your face. Not bothersome at all though.
For heavy texters who are picky about "feel" while typing the flap might be annoying. But for light texting it is not in the way at all. I honestly hate texting so I don't know.
Carbon Fiber Leather Case Cover for T-Mobile LG G2X NEW
"NEW GENUINE LG T-MOBILE G2X NEO DIARY WALLET CASE COVER"
For a more expensive look (but only $24.99) there is a vertical flip case at the bottom of the page here: http://www.ebay.com/itm/260774463768?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 (I don't have permission to post the picture.)
These are not pouches, but fitted, flip-open cases!
At the top of the page it shows the horizontal cases. I don't like this option because I can't figure out how you would answer the phone! LOL. But they sure look nice.
The vertical version looks like a good bet. However, it's not quite as expensive looking due to the red elastic on the bottom. Small sacrifice.
I don't have this case yet, but what I like is that you can fit a couple of credit cards in it.
What I don't like is that it makes the phone bigger (1/4" lip.) I think it also has a magnetic closure, which could mess with GPS etc.
Honestly I'm so happy with the cheap one above that I haven't been motivated to try this yet. Please let me know if any of you try the horizontal or vertical versions, and what you think.
Here http://www.ebay.com/itm/NEW-GENUINE...Accessories&hash=item3a65bf9fa9#ht_5648wt_905
are some more nice looking horizontal wallet cases. But I just can't wrap my head around the awkwardness of talking on it.
Update: I guess you fold it back doubled against the phone but I could see it being difficult.
All of these cases are great for us girls who don't like manly belt clips. I carry it in my purse, or a small "lanyard" purse around my neck. Perfect to slide into a back pocket also.
gggirlgeek said:
All of these cases are great for us girls who don't like manly belt clips. I carry it in my purse, or a small "lanyard" purse around my neck. Perfect to slide into a back pocket also.
Click to expand...
Click to collapse
Not just girls... I hate belt clips as should any man because they get hung on things while you're "working"... (whatever your work is)... Belt clips are the #1 cause of dropped & damaged phones, if you ask me. Phone is sticking out there asking to be hurt. I guess that's a man thing...
lotherius said:
Not just girls... I hate belt clips as should any man because they get hung on things while you're "working"... (whatever your work is)... Belt clips are the #1 cause of dropped & damaged phones, if you ask me. Phone is sticking out there asking to be hurt. I guess that's a man thing...
Click to expand...
Click to collapse
Yup!
Now if I can just find one that isn't black. Tired of the that black hole in my purse eating my phone. I can hear it screaming but I can't get to it time!
Found some more nice cases. Beware, some have magnetic closures. I am testing my GPS and compass now to see if the magnetic myth is true.
2 Nice Genuine Leather cases (affordable!)
http://www.ebay.com/itm/190625910167?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
http://www.ebay.com/itm/220768667372?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
Fake leather; great price:
http://www.ebay.com/itm/260890314166?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
http://www.ebay.com/itm/250809875950?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
http://www.ebay.com/itm/220886572659?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
Just bought this one for girly girls
http://www.ebay.com/itm/250935376104?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
I shopped for these pretty carefully and eliminated cases that would cause problems such as:
-Closures getting in the way of the screen and proximity sensor.
-Cases that open "up" instead of flipping "down." (Although I decided to order one.)
-Making sure the camera and headset jack are easy to use.
-Making sure there aren't exposed corners or unprotected areas of the phone during a fall.

Categories

Resources