Database Info

Offically OC'ed to 1.5 ghz

Check rom manager in the download roms section there is Drod's 1.5ghz kernal pulled 2495 quadrant thus far will play with it some more though.
Not my work just fyo

It's awesome. I just turned 2532 on quadrant
Sent from my ADR6400L using XDA App

jonathanphx1 said:
Check rom manager in the download roms section there is Drod's 1.5ghz kernal pulled 2495 quadrant thus far will play with it some more though.
Click to expand...
Click to collapse
Please post this kind of stuff in general, if ur not releasing something. This crap clogs up the forums . Save this stuff for twitter.

finally the cpu is unlocked, the MSM8655 is speced to 1.4ghz and should not harm a single thing running it at that all day long, lets press to 2.0ghz.

You should add a download link so people have options good job... Please post more info about ur kernel...
Sent from my ADR6400L using XDA Premium App

Jaywan said:
You should add a download link so people have options good job... Please post more info about ur kernel...
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
It's in the free section of the free Rom Manager app.
Sent from my ADR6400L using XDA App

destroyerbmx said:
finally the cpu is unlocked, the MSM8655 is speced to 1.4ghz and should not harm a single thing running it at that all day long, lets press to 2.0ghz.
Click to expand...
Click to collapse
Let's see a 1.8ghz and 1.9ghz first then a safe 2.0ghz... Development is starting to pick up for this device...
Sent from my ADR6400L using XDA Premium App

Jaywan said:
Let's see a 1.8ghz and 1.9ghz first then a safe 2.0ghz... Development is starting to pick up for this device...
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
1804 has already been achieved. I think were going to get a stable zone at 1.5ghz.
but really this phone even clocked at 768mhz is still blazing fast.

babybacon said:
but really this phone even clocked at 768mhz is still blazing fast.
Click to expand...
Click to collapse
This is so true. I underclocked my phone to 768MHz to try out how it would work for a day. I ended up entirely forgetting I had done that until I ran a benchmark.

seeing all this is amazing, I am very tempted to try it out, but this beast is super fast with having to OC it, lol

destroyerbmx said:
finally the cpu is unlocked, the MSM8655 is speced to 1.4ghz and should not harm a single thing running it at that all day long, lets press to 2.0ghz.
Click to expand...
Click to collapse
I don't know if you're right or not but I just flashed the 1.5 kernel and at 1.4 this thing is as fast as a computer..I hope you're right because I don't wanna go back to 1ghz..
Got 2016 quadrant after a reboot which is 300 higher than I got at 1 gig..

http://www.qualcomm.com/snapdragon/specs
Right below the dual core, High performance Smart Phones section. MSM8655 is our processor, it comes @ 1.0ghz, plam pre3 has the same and it comes @ 1.4ghz. The chip can take it but I think it was lowered for battery concern. I notice a lot of speed just flying through different programs when OC to 1.5, it opens them much faster, could be the I/O tweaks as well though. As for PC, mine puts out 42 gflops compared to my phones 49 mflops, still a long way off, thats 0.001% of the processing power. This phone is no slouch, so I guess it speaks more for my computers power.

sweet....im just gonna run it at 1.4 and since i have the 2750 battery i'm not gonna worry about battery life at all. i love this phone right now..

babybacon said:
1804 has already been achieved. I think were going to get a stable zone at 1.5ghz.
but really this phone even clocked at 768mhz is still blazing fast.
Click to expand...
Click to collapse
Where is the 1.8ghz kernel can someone post or pm me the link to it...
Sent from my ADR6400L using XDA Premium App

Pulled 2310 on quadrant.
Sent from my ADR6400L using XDA App

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ADR6400L using XDA App

this thing is ridiculous at 1.5 I cant wait to see 2+

battery life at 1.5 seems at least the same if not better than at 1.0

Had the same CPU on my inspire - 1.6 was basically the highest I could take it without crashing.

OP will we can u make one for 2.3.3 sense so I can port this Rom also a asop 2.2 kernel for my liquidmetal plz..
Sent from my ADR6400L using XDA Premium App

Battery Life with Bali Kernel

Ha I say it's pretty frickin' good!
11hrs 43minutes and at 7% - No I wasn't watching youtube, but I was doing facebook, myspace, email, texting, games, words with friends etc. during that period of time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm a nazi with my battery.

I can go about a day and a half, with moderately heavy use. 1.3 no uv.
Sent from my SGH-T959V using XDA Premium App

mxvris said:
I'm a nazi with my battery.
Click to expand...
Click to collapse
wow, 14 hrs and @ 73% thats awesome

Damn you guys are getting great battery life. I'm on the UV Kernel and I'm not getting as good battery life. I get maybe 8hrs. I'll try the non UV out.

How is anything over 12 hours even possible??? Lol lucky if I get 14 hours
Sent from my SGH-T959V using XDA App

im testing mine today. Im just at 2 hours...will report back, im on bali 1.3 no uv

fknfocused said:
wow, 14 hrs and @ 73% thats awesome
Click to expand...
Click to collapse
i FOUND A TERRIFIC WAY TO KEEP great battery. Go into your task manager and kill all level 2 process' then lock your screen. It will not allow your launcher to start back up until you go back into it. I'll post another screen shot when I'm around 10%

Calibrate your battery everytime you flash a new kernel. theres an app in the market. follow the.instructions and wait a day or two.
Sent from my SGH-T959V using XDA Premium App

I did 11.5 hours
Sent from my SGH-T959V using XDA Premium App

Damn, I would be @ 21 hours w/ 40% left but I was giving my cousin a tutorial on CWM and rebooted my phone. I'm going to full charge and see if I can make it over 24 hours with atleast 30% left. All with moderate use.

Has anyone tested both uv and non uv kernels as far as battery consumption is concerned?
Sent from my SGH-T959V using XDA Premium App

here is mine battery usage shot

Battery life
Hi all,
I'm new to the android market and a lot of the lingo. Can anyone explain and/or walk me through how to get better battery life? I've gotten several apps from the market that seem to work a little, or at least give the illusion of working (i.e. apkik, juice defender, android booster). So far, juice defender seems to be the only one working halfway decently. What exactly does UV kernel and bali kernel refer to?
Thanks.
I have also considered rooting the system to get rid of some of the crap apps that can't be removed from the phone, but am scared that I will ruin it. Any info will be much appreciated.

VarForever said:
Hi all,
I'm new to the android market and a lot of the lingo. Can anyone explain and/or walk me through how to get better battery life? I've gotten several apps from the market that seem to work a little, or at least give the illusion of working (i.e. apkik, juice defender, android booster). So far, juice defender seems to be the only one working halfway decently. What exactly does UV kernel and bali kernel refer to?
Thanks.
I have also considered rooting the system to get rid of some of the crap apps that can't be removed from the phone, but am scared that I will ruin it. Any info will be much appreciated.
Click to expand...
Click to collapse
I assume you are completely stock? Look for the rooting thread first, after you root look into the Bali Kernel in the development section. UV stands for under volting, meaning your device uses less battery to operate. Along with that, the kernel speeds up your phone quite a bit from stock. Better battery life, snappier response times, sound improvement, etc.
hope this helps
btw, im going on 18+hrs @31%

29h 3m 32s @ 25% battery left.
SWEET! Calibrated my battery. keep data and wifi off unless i need it.
10min of NOVA2, x construction, NFS shift.. some words with friends. 20mins of phonecalls. texting. some interwebs, gps. havent listened to music yet though ..
ill consider this moderate.. PLUS my battery is only 1500mah.
THANKS THANKS THANKS!!

hey, im a noob here. can someone explain to me how to use bali kernel? i've just finished rooting my phone. and whats next after that? thanks a lot mates!

peterpandesal06 said:
hey, im a noob here. can someone explain to me how to use bali kernel? i've just finished rooting my phone. and whats next after that? thanks a lot mates!
Click to expand...
Click to collapse
If u search within these forums all your questions have probably been answered already. But to start you off I would recommend grabbing cwm3 final in the development section posted by krylon360. Have fun with your phone. Also u need cwm to flash the Bali kernel.
sent from MT. OLYMPUS using my kickass sgs4g.
THE GODS ENVY US!!!!!!!!!

Ok I honestly do not understand how do you guys get that good battery life. I tried everything, black backgrounds, juice defender, calibrated battery, minimum brightness, no widgets. And this is almost a week after the flash so the battery should be calibrated properly by now. I barely even used my phone today but for some reason it died at 6pm......I unplugged it at 9am. I think there's something running in the background that's eating my battery. When you guys clear ram and reload the launchers, what is the used ram usually at? Mine stays at 240, and I think it's a LITTLE too much.
Sent from my SGH-T959V using XDA App

Double post.....sorry

[Q] Using Faux123 [Kernel]Skyrocket[2.6.35.14](v0.0.8) with Latest QwikWiz

I've been using the latest QwikWiz for a couple of weeks now and I've been pleased with the results thus far (other than the speech to txt not working anymore, and when it does, it says 'canadian english'), but I was wondering if anyone has tried installing this kernel and using qwikwiz at the same time? I'm not even sure if its possible (im new at this kinda stuff). Just wondering what peoples thoughts/experiences were.

This Kernel should work on ALL roms less CM7.
Make a nandroid and Flash. it will NOT prem bork your phone. if anything all you will have to do is get back into CMW and restore your nandroid and it bring your phone all the way back to the point you backed up at, with data, kernel, apps, setting, messages, and all that good stuff.
so flash away bruh.

The qwikwiz says it was OC'd to 1.83, and this kernel says it is 1.7....is this slower than what the ROM was pushing the processor to?

shendre said:
The qwikwiz says it was OC'd to 1.83, and this kernel says it is 1.7....is this slower than what the ROM was pushing the processor to?
Click to expand...
Click to collapse
it was running da_g kernel is why so if u use faux kernel which is more stable.... then u can only overclock to 1.7
Sent from my SAMSUNG-SGH-I727 using xda premium

I never had any stability issues with the other kernel. Only issue I had was that the speech to text would stop working randomly (until i did a soft reset), and then it would still say I was in Canadian English...but after awhile that would stop working again. I guess I'll give this one a go and see how its like. Worst case scenario, I guess I could always roll back.

Pretty happy with this.
Using NexusmodI717 with Gideonx script.
No issues.

I attempted to use faux123's kernel but was having issues with my device not going into "deep sleep"...
Now I may only have 10 posts here on XDA but I would like to state that I did unplug the charger and used CPU Spy to see if my device would go into deep sleep when not in use.
I then switched to Da_G's kernel (0.42 for ROGERS) and my device sleeps when not in use.

peoples_flip said:
I attempted to use faux123's kernel but was having issues with my device not going into "deep sleep"...
Now I may only have 10 posts here on XDA but I would like to state that I did unplug the charger and used CPU Spy to see if my device would go into deep sleep when not in use.
I then switched to Da_G's kernel (0.42 for ROGERS) and my device sleeps when not in use.
Click to expand...
Click to collapse
weird mine was the opposite
Sent from my SAMSUNG-SGH-I727 using xda premium

I had the same issue too with faux kernel not going into deep sleep, but it seems to be fine now. One thing I would like to mention is battery life is kinda dissapointing for me. I know it could be just me but I'm using tpc v3 with faux and I'm getting half the b-life I had wit Da_g kernel. Any suggestions?
Sent from my SGH-I727R using XDA App

I m using Quikwiz w Faux123 and everything seems fine. Goes to sleep every time. and battery is about 1 to 2% per hour while sleeping. and that is OC`d to 1.72. very pleased with this combo.

juude90 said:
I had the same issue too with faux kernel not going into deep sleep, but it seems to be fine now. One thing I would like to mention is battery life is kinda dissapointing for me. I know it could be just me but I'm using tpc v3 with faux and I'm getting half the b-life I had wit Da_g kernel. Any suggestions?
Sent from my SGH-I727R using XDA App
Click to expand...
Click to collapse
charge battery, then falsh kernel
charge til full then turn off phone and turn it on.
go to battery calabration, you can get it in the market..
let it charge up to 4200 then calabrate.
if this doesn't work then charge to 4200 again calabrate again.. then boot into cwm and clear bat stat, let it die.. then charge to 100/4200.
then calabrate again.. and enjoy

Is battery calibration necessary? And also what roms r u guys using wit faux that is good for battery life? I'm planning to change my rom from tpc to something else
Sent from my SGH-I727R using XDA App

Red sonja Here
had good battery life before the kernel.
and i am using spb 3d Shell.....which uses more battery than the stock launcher. so im sure it will be even better that way.

Been using the two with limited issues. Phone is snappiest it has been, and scores slightly better in every benchmark
Idle battery loss is an improvement....but it seems to drain faster than da g's .3 kernel did while in use
Still testing though...we have 5 batteries and one may be bad.
On this battery today I have had the best battery life on faux kernel since flashing it.
We put the ??? Battery in our other skyrocket today (which is running .3 with quickwiz) to see if we can narrow it down.
My phone is definitely sleeping, but only uses 1.72 or 384 mhz
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I727 using XDA App

Well there is solution posted in Da_G's kernel thread someone had same problem and found something that worked for them so go there and check out the solution might work for you guys. Well i don't have no problem with any kernel

peoples_flip said:
I attempted to use faux123's kernel but was having issues with my device not going into "deep sleep"...
Now I may only have 10 posts here on XDA but I would like to state that I did unplug the charger and used CPU Spy to see if my device would go into deep sleep when not in use.
I then switched to Da_G's kernel (0.42 for ROGERS) and my device sleeps when not in use.
Click to expand...
Click to collapse
I fixed permissions and the deep sleep issue dissapeared

jctusa7 said:
I fixed permissions and the deep sleep issue dissapeared
Click to expand...
Click to collapse
You bumped a thread that's over a year old dude. Fck
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Wow the Skyrocket really is that old...
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

im getting very low scores in quadrant benchmark.

i downloaded the last version of quadrant from google play and im getting very low scores with my atrix 2..
i don't have any widgets, live wallpapers , 3rd party launchers, etc that could affect the results..
my scores are:
total: 1906
cpu: 1977
mem: 2471
2d: 211
3d: 2029
the max score i've got is about 2100.. and the average for this phone must be around 2600-3000 if im not wrong, i haven't installed any custom rom, i have the stock GB 2.3.6
what could be the problem ???

Try using AnTuTu and see what your marks are like...
Sent from my SAMSUNG-SGH-I747 using xda premium

I got 2121 total from my last Quadrant test... so, your score sounds about right.
With Antutu I got a score of 5914.
Currently on Remus 2.0 @ 1142 MHz
Sent from my phone's mind

alteredlikeness said:
I got 2121 total from my last Quadrant test... so, your score sounds about right.
With Antutu I got a score of 5914.
Currently on Remus 2.0 @ 1142 MHz
Sent from my phone's mind
Click to expand...
Click to collapse
i got 4436

rodmc123 said:
i got 4436
Click to expand...
Click to collapse
Yup, that is low... even for stock.
Something's not right... no idea what, but it's something..
You got a screenshot of your Antutu results? Maybe we could see what's dragging your score down..
Sent from my phone's mind

alteredlikeness said:
Yup, that is low... even for stock.
Something's not right... no idea what, but it's something..
You got a screenshot of your Antutu results? Maybe we could see what's dragging your score down..
Sent from my phone's mind
Click to expand...
Click to collapse
i restarted the phone and now i've got 5237!
i think that is more average.

rodmc123 said:
i restarted the phone and now i've got 5237!
i think that is more average.
Click to expand...
Click to collapse
There you go... that sounds right (that about what my wife's stock A2 gets).
And, yea, it can get bogged down after long periods of use without rebooting..
Moto recommends at least one reboot a day (at least they did to me when trying to troubleshoot my brick)!
Also, you can put most all of your apps on the Auto-End list in the stock Task Manager, and try Cache Cleaner from the Play Store... also good to clean up the dalivk-cache once in a while... might help keep you running smoother.
Sent from my phone's mind

alteredlikeness said:
There you go... that sounds right (that about what my wife's stock A2 gets).
And, yea, it can get bogged down after long periods of use without rebooting..
Moto recommends at least one reboot a day (at least they did to me when trying to troubleshoot my brick)!
Also, you can put most all of your apps on the Auto-End list in the stock Task Manager, and try Cache Cleaner from the Play Store... also good to clean up the dalivk-cache once in a while... might help keep you running smoother.
Sent from my phone's mind
Click to expand...
Click to collapse
I got 6008 on battery.... Scv7 with speedup add-on and update1 applied ...1200mhz stock....
NovaLauncher Prime and BeWeather Pro in Notification bar...

Sent from my MB865 using xda premium

Mines lovely...This is mine on SCV7 Speed boosted and OC'd at 1.2. Got a nice score though:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MB865 using xda premium

DX2Trip said:
Mines lovely...This is mine on SCV7 Speed boosted and OC'd at 1.2. Got a nice score though:
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Mine ranges from 5200-5600.
I've seen scores up to 6500, how do you achieve that?
I'm using SCV7 without the latest patch (CS + Speed boost), does it change that much?

Motorola lied and I'm still locked mb865

Deivid_ said:
Mine ranges from 5200-5600.
I've seen scores up to 6500, how do you achieve that?
I'm using SCV7 without the latest patch (CS + Speed boost), does it change that much?
Click to expand...
Click to collapse
Oh yes, latest speed boost and then the OC 1.2 after puts this phone into lightspeed. Never been more satisfied with performance on here now. Give it a go and check out the difference...n daaaammm dude look at the score above this reply...I'm sure thats on SCV7 as well with latest speed boost.
Edit: Scores were higher just now...don't know why, got more apps then first test lol. All good though.
Sent From My Locked Down, Rooted, Motorola Atrix 2-MB865 (AT&T U.S.A.) Runnin' SCV7, Speed Boosted & OC'd @ 1.2 GHz ICS (Leak) 4.0.4

DX2Trip said:
Oh yes, latest speed boost and then the OC 1.2 after puts this phone into lightspeed. Never been more satisfied with performance on here now. Give it a go and check out the difference...n daaaammm dude look at the score above this reply...I'm sure thats on SCV7 as well with latest speed boost.
Edit: Scores were higher just now...don't know why, got more apps then first test lol. All good though.
Sent From My Locked Down, Rooted, Motorola Atrix 2-MB865 (AT&T U.S.A.) Runnin' SCV7, Speed Boosted & OC'd @ 1.2 GHz ICS (Leak) 4.0.4
Click to expand...
Click to collapse
Actually if you're referring to mine it's not scv7. It's my own custom odexed rom. Minimal tweaks done here and there but I'm pleased with it.
Edit: also I've beat that score
Motorola lied and I'm still locked mb865

KToonsez Kernel Settings

Thought it would would be nice to have a thread dedicated to KToonsez kernel settings and adjustments. This can be the place to share tips of what works best for you. To organize this a bit, list the following....
Is it built for speed, stability, or battery saving?
Min-max CPU freq.
CPU volts if you changed them.
Gov and settings.
Anything else you want to add??
FYI. Scrolling though alot of pictures all in one page on the web or the Vellamo HTML 5 benchmark is the best way to test stability IMO.
Also be careful of running your benchmarks at 2106mhz. They may increase the CPU temp higher than you think. I hit atleast 140 degrees Fahrenheit on the Elephant stress test!! I'm not sure what temp the CPU can really take before it destroys itself.
Sent from my SCH-I535 using Xparent Cyan Tapatalk 2

Fairly smooth and quick.
Wheatley Gov + stock Gov settings.
96-2106
2106 @ 1325mv
96 @ 800mv
Touch Boost @ stock
This setup seems to keep the CPU from burning up and still puts out the power.
In the taskbar I am running Micro CPU Monitor, Temp Monitor(CPU), and Cool Tool APPS. All this is keeping good track of everything my CPU is doing regardless of what app I am currently using. Its all right there at the top of the screen. Load, Frequency, and Temp.
Sent from my SCH-I535 using Xparent Cyan Tapatalk 2

What app are people using to adjust the settings. I could have sworn there was a KTweaks app but sure can't find it. Know it came with a ROM I was running.

its called ktweaker.
i put my minimum to 144 thats all i changed.

razz1 said:
Fairly smooth and quick.
Wheatley Gov + stock Gov settings.
96-2106
2106 @ 1325mv
96 @ 800mv
Touch Boost @ stock
This setup seems to keep the CPU from burning up and still puts out the power.
In the taskbar I am running Micro CPU Monitor, Temp Monitor(CPU), and Cool Tool APPS. All this is keeping good track of everything my CPU is doing regardless of what app I am currently using. Its all right there at the top of the screen. Load, Frequency, and Temp.
Sent from my SCH-I535 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Do you have any wake lock issues?

Here are my settings
They are the best mixture of battery and performance that i could find
also stock voltage, and touch booster disabled
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent From My VZW GS3

Its great to see someone replying to this thread. I really thought it was going to go dead. Considering this is probably one of the most popular kernels I thought it would take off pretty good. Anyways thanks for your input and keep it coming!
Thanks guys!
Sent from my SCH-I535 using Xparent Cyan Tapatalk 2

Wheatly Governor, SIO Scheduler, 1512 max 384 min, 384 screen off, touch booster is stock, voltage is stock, and i think thats it

Neverendingxsin said:
Wheatly Governor, SIO Scheduler, 1512 max 384 min, 384 screen off, touch booster is stock, voltage is stock, and i think thats it
Click to expand...
Click to collapse
Whats the battery life like??
Sent from my SPH-L710 using xda app-developers app

jpeezy1986 said:
Whats the battery life like??
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Aside from when im at work (signal blows at work) its exceptional, i can manage to get anywhere from 3-4 hours of screen on time or more. Just depends what all i do that day, but i leave 4G on 24/7 and only use WIFI at home, sync stays on as well. Its plenty enough to get me through each day, so about 7am to 10pm.

Neverendingxsin said:
Aside from when im at work (signal blows at work) its exceptional, i can manage to get anywhere from 3-4 hours of screen on time or more. Just depends what all i do that day, but i leave 4G on 24/7 and only use WIFI at home, sync stays on as well. Its plenty enough to get me through each day, so about 7am to 10pm.
Click to expand...
Click to collapse
Thanks been trying out different combinations with the kernel, i like the kernel and the tweaker app too
Sent from my SPH-L710 using xda app-developers app

jpeezy1986 said:
Thanks been trying out different combinations with the kernel, i like the kernel and the tweaker app too
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
your welcome

Following this thread because it does seem like interesting information that's not easily available anywhere else.
One important thing I see people aren't listing is what ROM they are using, especially if it's AOSP-based or TW-based.
I was running KT747 10/31 release on the first JB TW leak and was getting a lot of strange behavior, even with the stock settings.
I'll be trying it again on the latest release once I get my device dialed in (Clean ROM 4.5) and create a backup.

Do anyone have the link for ktoonsez kernel, trying out a new rom and i want to use this kernel and the ktweaker app..i searched but havent found it yet
Sent from my SCH-I535 using xda app-developers app

It's in the original android development section.

jpeezy1986 said:
Do anyone have the link for ktoonsez kernel, trying out a new rom and i want to use this kernel and the ktweaker app..i searched but havent found it yet
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1853816
Its under Original development, may be how you missed it. I think all kernels are there because they are built from source, someone correct me if I am wrong.

Thanks, The name of the thread threw me off, i skipped over it...when i went back i saw ktoonez
Sent from my SCH-I535 using xda app-developers app

BTW KToonsez just released an updated version today. Haven't tried it yet.

here is another thread with more info, i follow this one, i hope you find some good stuff here

It's no good. If u can find the 10-28 kernel. That's the one to use. Works great for me.
Sent from my SCH-I535 using xda app-developers app