Related
Hi, i know there are posts that deal with rooting, flashing etc but I must admit its a bit technical, so i thought I'd tell you my problem an dthen hopefully some one can explain plainly how to fix it. Everytime I start my phone I get this adnimation startup advert from my operator, I WANT IT OFF!! I did root the phone hoping I can then access the files one normally cannot but the files listed are the same after the rooting, and I still have no access to the preinstalled stuff. So, how can I get this advert off? I thought I need to flash itthen but got very confused trying to understand the process, what should I do? thanks
Jostian said:
Hi, i know there are posts that deal with rooting, flashing etc but I must admit its a bit technical, so i thought I'd tell you my problem an dthen hopefully some one can explain plainly how to fix it. Everytime I start my phone I get this adnimation startup advert from my operator, I WANT IT OFF!! I did root the phone hoping I can then access the files one normally cannot but the files listed are the same after the rooting, and I still have no access to the preinstalled stuff. So, how can I get this advert off? I thought I need to flash itthen but got very confused trying to understand the process, what should I do? thanks
Click to expand...
Click to collapse
If I am correct you will need to flash a stock ROM to your phone.
My father in law bought a new phone SGS on O2 and I offered to unlock it as I have unlocked my husbands last week (he's was on O2 as well but in 2.1 or 2.2.1 version I think-froyo?)
Before I continue may I say I know you guys out there know so much more than me and I really need your help. I really tried to help unlocking this phone and for hours I searched and read things like reboot, download mode, recovery mode, flashing, JKV and so many other words and letter that I could not understand. Very few I understood in the end but may have messed up badly (?).
Please, I need help and please treat me as if I were your mum or even grandma. Step by step in simple normal English please.
My father in law's version is 2.3.3
I tried unlocking it the way I unlocked my husband's but didn't work after looking for hours I thought that the best way to do it would be to downgrade from 2.3.3 (gingerbread (?)) to 2.2.1 (froyo (?)) and then unlock it.
I found this:
http://forum.xda-developers.com/showthread.php?t=1089989
and tried to follow it.
I downloaded EZRom and EZboot-Froyo-1.0.tar.md5 from the same post.
I followed:
•Download the right version from section above
•Reboot your phone into Download mode
•Connect your phone to computer
•Run EZOdin
•Select EZboot-Froyo-1.0.tar.md5 or EZboot-GingerBread-1.0.tar.md5as a PDA file in EZOdin
•Check the "Phone Bootloader Update" checkbox
•Click Start
I waited for the phone to turn off and feel the little vibration but didn't. Instead it just froze at the first screen when you turn on the phone. The black background with white letters: Samsung Galaxy...
I waited and waited and as nothing was happening I then I took the battery out. Put it back in and tried turning it on. I wouldn't it would just stop and that same screen, the black and white one.
I reread
•Wait until phone reboots and make it reboot into Recovery
SO then I remembered in the many threads I read about the recovery mode so 3 clicked vol up + button at them bottom and turn on bottom.
It gives me a few options. When I click on reboot all it does is show me the black and white screen again and nothing else. ah!!!
I took the battery off and put it back on may times, also selected the fatory reset option and tried different buttons but nothing. Please help me.
I'm happy to phone any of you guys to help me and guide me even if it's just to put the phone back to what it was before, turning on normally, etc. (I can't even turn it on!) I'm feeling really sad and a bit stressed as these days are supposed to be a nice time to spend with my little ones and family.
Anyway, please ask me anything.
Thank you so much in advance. I really hope I didn't do anything wrong and I'm just stuck because I'm ignorant in this matter. Thank you
Well, I have no skill in this area. But I wish you good luck, and this post is acting as a bump! Double goal!
After a little rethinking: (I don't have a SGS and never touched one) You can try re-stocking the phone. Not sure how you do that. I'll check.
From http://forum.xda-developers.com/showthread.php?t=723596 :
Darkstriker said:
(E) Recovery:
1.WHAAAA! I think I bricked my phone. My flash was unsuccessful/My device boots to a black screen/similar scenarios. Can I still save my device?
1.WHAAAA! I think I bricked my phone. My flash was unsuccessful/My device boots to a black screen/similar scenarios. Can I still save my device?
Most likely: YES! In almost any case, you should still be able to turn off the device (if necessary by removing the battery) and start into download-mode (VolumeDown+Home+Power) or recovery-mode (VolumeUp+Home+Power). After (for example) an unsuccessful flash, you can retry the flash in download-mode (same steps as when flashing a functioning device). If a flash to a functioning f/w (without applying any update.zip) doesn't help or you cannot get your PC to flash at all, you can ask for help here.
If you see a symbol asking you to connect to the PC, depending on how you arrived at this point, it may be sufficient to connect to the PC and run Odin (i.e. press "start" when the phone is recognized) without adding any files. This may, however, leave some residual issues if (for example) had an incorrect/incomplete flash so you may want to do a normal flash after this!
If you do not have download mode and for some ludicrous reason felt the need to go ahead and modify your firmware regardless of this lacking, there is now a guide on creating a home-made JIG which will force your device into download mode without the actual button combo here.
Click to expand...
Click to collapse
If you need any extra help, I'll try.
Im somewhat of a rookie user too but I do know this, If you can still go into recovery/download mode (using the 3 button combo) then you havent bricked the phone and you can fix it! so dont stress too much .
EDIT: Im guessing you can download a stock ROM and flash it via odin.
[/QUOTE]
After a little rethinking: (I don't have a SGS and never touched one) You can try re-stocking the phone. Not sure how you do that. [/QUOTE]
Thank u so much for your reply. O don't know what re stocking is, but i will look into it. Thank u!
I don't know how to re stock it.
Sorry to seem so dumb.
Can anyone help me step by step? If at all possible could I phone someone to help me with this? Send me phone number via private message
Thank you sooo much.
anaki11 said:
I don't know how to re stock it.
Sorry to seem so dumb.
Can anyone help me step by step? If at all possible could I phone someone to help me with this? Send me phone number via private message
Thank you sooo much.
Click to expand...
Click to collapse
Well, no problem, I guess. I don't think it needs to come to voice support, to be honest. I think text is enough for the issue in matter. I'll look a bit into this, I'll have to go soon from my computer. I'm sorry if I can't be of any greater help.
moses992 said:
Im somewhat of a rookie user too but I do know this, If you can still go into recovery/download mode (using the 3 button combo) then you havent bricked the phone and you can fix it! so dont stress too much .
EDIT: Im guessing you can download a stock ROM and flash it via odin.
Click to expand...
Click to collapse
Your post helped me not to stress too much.
I'd like to download a stock rom and flash it but I don't know how to.
Here's where I am. I found a list of firmware. This is the last one on Samfirmware.com.
Europe Samsung I9000 Firmwares.
I9000XXJVS ##
512.PIT
2.3.5
2011 September 8
CSC = I9000OXAJVS
DOWNLOAD
Things I need: (I think)
-Download a firmware (should I use the lastest one?) or 2.2 or 2.3.3? . Is there one better than the other? or is it my choice? How can I choose the best one for me?
-Odin. I have OdinMultiDownloader v4.03 in my desktop. Is that the best thing to use or should I use Ezodin. I don't know what the difference is.
-(Do I need to download or do anything else?)
Things I should do:
-Put phone in download mode
-Plug it to the laptop
-Open Odin (or Exodin?)
-click PDA. Choose the fie I downloaded-firmware.
(-after this I don't know what else I should do or tick or untick)
Am I in the right track or completely off it?
Thank you again to anyone taking the time to read this.
anaki11 said:
Your post helped me not to stress too much.
I'd like to download a stock rom and flash it but I don't know how to.
Here's where I am. I found a list of firmware. This is the last one on Samfirmware.com.
Europe Samsung I9000 Firmwares.
I9000XXJVS ##
512.PIT
2.3.5
2011 September 8
CSC = I9000OXAJVS
DOWNLOAD
Things I need: (I think)
-Download a firmware (should I use the lastest one?) or 2.2 or 2.3.3? . Is there one better than the other? or is it my choice? How can I choose the best one for me?
-Odin. I have OdinMultiDownloader v4.03 in my desktop. Is that the best thing to use or should I use Ezodin. I don't know what the difference is.
-(Do I need to download or do anything else?)
Things I should do:
-Put phone in download mode
-Plug it to the laptop
-Open Odin (or Exodin?)
-click PDA. Choose the fie I downloaded-firmware.
(-after this I don't know what else I should do or tick or untick)
Am I in the right track or completely off it?
Thank you again to anyone taking the time to read this.
Click to expand...
Click to collapse
In my thoughts, I believe that should be what you need. You can try, if that doesn't solve the issue, it's because you need something else as well.
And the think you should make the file a PDA file, I believe. Don't take my answer too direct. I'm almost unknown with Samsung devices on that matter, but I can say a couple of things, like, that, I'm pretty sure it is on PDA files.
And no problem, always pleasing to help someone in trouble. I was/am a rookie too Ignore the Senior Member thingie. Still a noob in pretty much everything. And don't panic, no need for that.
Thank you. I should try that tonight unless someone stops me before to tell me I'm about to make another mistake.
anaki11 said:
Thank you. I should try that tonight unless someone stops me before to tell me I'm about to make another mistake.
Click to expand...
Click to collapse
Haha. I doubt it. 99,99% of actions are reversible, really. And I have severe doubts that this is one of the remaining 0,01%.
Well, I wish you good luck. If you ever need any more help, you can post here. I'll look into here time to time.
BTW. Just wait a second. You know that link you give on the first post? There's also a Gingerbread file. You can *try* flashing that one, to see if it reverses the problem. Sounds legit to me.
Youtube.com/qbking77
He has tons of tutorials
Sent from my SPH-D700 using Tapatalk
Ok so my (dumbass) friend wanted to change the rom on his phone and now he bricked it. I have done alot of things to my CRAPtivate, and now I said I would look at his phone and see what I can do. Anytime I had a issue with my phone I would use ODIN and clear it all and put it back to stock. Is there such a program for this phone and can you direct me to a step by step guide into fixing this beautiful phone? The only way it is turning on is when it is plugged into the charger, the boot screen stays on and that is all that happens. I am getting the phone in the next two days and I just want to prepare and start reading up on it. I will appreciate any help and thank you so much.
TheWreckHER said:
Ok so my (dumbass) friend wanted to change the rom on his phone and now he bricked it. I have done alot of things to my CRAPtivate, and now I said I would look at his phone and see what I can do. Anytime I had a issue with my phone I would use ODIN and clear it all and put it back to stock. Is there such a program for this phone and can you direct me to a step by step guide into fixing this beautiful phone? The only way it is turning on is when it is plugged into the charger, the boot screen stays on and that is all that happens. I am getting the phone in the next two days and I just want to prepare and start reading up on it. I will appreciate any help and thank you so much.
Click to expand...
Click to collapse
Yes, with Moto devices we use RSD Lite to flash an "fxz" to the device. Here is a good guide on how to flash back to the stock 2.3.5 AT&T firmware. Good luck!
I looked and looked, thank you sooooooo much, I thought I could delete this post but I cannot, so please delete if you wish!
TheWreckHER said:
I looked and looked, thank you sooooooo much, I thought I could delete this post but I cannot, so please delete if you wish!
Click to expand...
Click to collapse
don't worry, you're not the first person to ask. If I ever get around to it I am trying to write up a really simple guide for these kinds of things. Those of you who know me on here may have realized I have a tendency to let projects die. Feel free to yell at me when I do!
To the wonderful hero who I hope can save me.. I just want to apologize before hand about the lack of tech-ie-ness in this plea for help.. I really am just a money with fancy tools at this point, just banging away making a mess of everything.. lol .. I did my homework after I made a mess. Aka bricked two phones of my my friends.. I took rooting droid as equal to jail breaking iphones... after a lot of reading after I I bricked, I know now the basics... having said that.. I did make a mess.
First I have a m580 I rooted.. too much pot and not enough reading later I hooked a friends m820 up to the same odin set up I used on my m580.. the problem is that m580 has built in keyboard and uses other command to put phone in to download mode.. so the keys dont exist to press to re-flash it with the proper firmware which I have now.. and no one is working on this phone type because its old as dirt..
that was first mess up.. before I learned how vary complex Dev droid talk is... I assumed this VERIZON ELLIPSIS 7 was a jflte type of galaxy s4 and using Flasher or flashy something like that.. I tried to put CWM on the verizon.. now its stuck in boot loop.. I have no back up.. I now know how important that is now.... been doing homework on MTK Droid TOOLS and SP FLASH TOOLS and think if someone would send me a stock rom of the Verizon Ellipsis 7 {qvm7b} I could handle fixing it.. although test runs with it to this point have shown an issue, I have yet to figure out points of contact on board to rest the preloader.. in other words, unable to keep it from rebooting every 5 second so I can flash it with a rom I dont have yet..... holding vol down does nothing.. same thing with any other button combo. .. I have popped off the back of the tablet to unplug battery just to get it to shut off. With what I have learned I feel I can handle any directions ok.. and if I could fix this mess I can handle not destroying any more phone or tablets.. maybe.. lol that is kinda the fun part of having things.. breaking them.. but these things dont belong to me.. anyone who can help me either get the tablet out of boot loop.. and or send stock and/or rooted firmware for the verizon tablet QMV7B I would be very grateful. Or if you know of a program I could use to wipe the m820,with steps by step “how to” for dummies please.. lol
HELP ME ANDROID DEV-ONE.. YOU'RE MY ONLY HOPE..
JOE LENKER
[email protected]
Hi
Thanks for writing to us at XDA Assist. Unfortunately I can't find anything relating to your question(s) on XDA, please ask your question here:
Android Q&A, Help & Troubleshooting
No response in two days, thread closed.
I'm new to the XDA Forums and even forums in general so if I speak out of place or anything like that I apologize ahead of time. So anyway, where do I start? I'll try to give you the short version. So I bought an LG Stylo 2(model: LG K540) through Cricket the day they came out. It was $170 phone. On the second day of using my new phone I got the bright idea that I'd try and root it BY MYSELF. I knew better but for some reason I had this false burst of confidence & thought I had everything under control. Well, thanks to Kingroot that burst of confidence didn't last long and there I was with a 2 day old phone BRICKED. Reason I never posted on the forums is because I've got a buddy who , in my eyes, knows everything there is to know about Android and thats who I'd normally go to when I wanted to root a phone so he's who I immediately turned to but even he couldn't figure it out. He couldn't help me unless we had the stock firmware or someone with the exact same phone and according to him we could some how use a backup of that phone to fix mine. Cricket just wanted to sell me another phone even though I was standing there with a 2 day old phone and LG just wants me to send the phone in to them, which I have no desire to do. I've searched all over the internet trying to locate the firmware because even I can fix the phone if I had that but nothing. Had hoped by now LG would have released the firmware but at this point who knows when that'll happen. I'd even pay for it at this point. Anyway, just thought I'd give the forum a shot on the off chance someone might be able to help me or point me in the right direction. Oh and if you were wondering what the phone does now, when I turn it on the LG logo appears like it should but then right as it appears you see a message in red lettering that says: BOOT VERIFICATION FAIL!!- CAUSE: MISMATCH_SIG_LEN And it just loops this over & over until you pull the battery out. Please someone help me!
send to lg said stop working no luck with tihs hard brick
Source code to rom¿?
I ran into basically the same situation as you. I'm currently downloading Android open source project on to a fresh install Ubuntu 16.04. I am currently in the middle of running sync.
I'm curious if there is anybody out there who would be willing to give a few pointers, on compiling the ROM from LG open source code. They told me I had to use it in the readme.txt.
Im a noob with fair knowledge of modding and stylo not stylo 2. There's no way to say for sure if this will work but on lg mm on h631 u need to unlock dev option in settings 1st. Make sure to check off oem unlock and usb debugging. Connect to pc and you will get a popup or 2, one will ask to allow pc to connect to phone, the second is to allow usb debugging. After you allow both, open cmd in your adb fastboot folder. Type " adb reboot bootloader." should reboot the phone to bootloader/fastboot mode. Then you type " fastboot oem unlock." you will see sending.. Once sending is done type " fastboot reboot." when the phone restart you should see bootloader unlocked on splash screen. Then i rooted with kingroot. Then use rashr to flash twrp. Then used twrp to flash supersu to get rid of kingroot.. My h631 now in business and i just started working on a port for lg ux 5.0. This is the guild i use for a better idea http://forum.xda-developers.com/lg-g-stylo/how-to/guide-lg-g-stylo-how-to-root-t-mobile-6-t3333916. You might need lgflashtool and kdz to unbrick..
NO NEED to beg.
I don't know very much but I know $$$ talks and since no one save the few who suggested contacting lg wants to help, Ill try. At the moment I am efforting a solution via the Chinese. I expect to have a working copy in the next 48hrs. when I do, we can arrange for you to get access to the mega.nz cloud and get urs.
say a prayer......
Francis
Hello Sir, I ran into same problem trying to root. If you can, can you please send me a link so that i can use my phone again. Thank You it will be greatly appreciated
can some one help me. i cannot use adb to unbrick
Please send me the link
facorbin said:
I don't know very much but I know $$$ talks and since no one save the few who suggested contacting lg wants to help, Ill try. At the moment I am efforting a solution via the Chinese. I expect to have a working copy in the next 48hrs. when I do, we can arrange for you to get access to the mega.nz cloud and get urs.
say a prayer......
Francis
Click to expand...
Click to collapse
Hi, can you please send me the link? I need it bad thx
if you cant boot into dlmode then your hard bricked, so find a way to get back to dl mode/recovery
BIN File
Hello, I have a Stylo 2 K540 from cricket, it is having issues with the Wi-Fi, it will not connect to either Wi-Fi or bluetooth, MAC address was set at 02:00:00:00:00 or something like that, I opened the phone and it has humidity sensor active, cleaned the affected area but it seems like it was useless, eventhough I was pretty sure that was not the main problem. I looked for some troubleshooting options and found non of use, firmware is sold for $30 online so it is not an option since I am not certain loading firmware will be of any help. I tried repairing MAC address via Octoplus using other addresses but was useless as well.
I have little to no experience with software on phones, but I like to read and learn. I decided to connect the phone to the computer and "Read full flash" on Octopus, I have created the Bin file, I have a perfectly working phone as well, I was wondering if there is any way to get the KDZ file from the Bin file doing some sort of conversion, or if I could do some sort of fix or workaround with this bin file, I can share it if anybody needs it or if it can be of any use to get the firmware
estebangtz said:
Hello, I have a Stylo 2 K540 from cricket, it is having issues with the Wi-Fi, it will not connect to either Wi-Fi or bluetooth, MAC address was set at 02:00:00:00:00 or something like that, I opened the phone and it has humidity sensor active, cleaned the affected area but it seems like it was useless, eventhough I was pretty sure that was not the main problem. I looked for some troubleshooting options and found non of use, firmware is sold for $30 online so it is not an option since I am not certain loading firmware will be of any help. I tried repairing MAC address via Octoplus using other addresses but was useless as well.
I have little to no experience with software on phones, but I like to read and learn. I decided to connect the phone to the computer and "Read full flash" on Octopus, I have created the Bin file, I have a perfectly working phone as well, I was wondering if there is any way to get the KDZ file from the Bin file doing some sort of conversion, or if I could do some sort of fix or workaround with this bin file, I can share it if anybody needs it or if it can be of any use to get the firmware
Click to expand...
Click to collapse
cna you possible sned me it I might be able too
no longer have the bin file
HERPDERP202 said:
cna you possible sned me it I might be able too
Click to expand...
Click to collapse
I am sad to say my computer stopped working and just got it back today, all my information was lost so I no longer have the bin file
bsimpson1858 said:
I'm new to the XDA Forums and even forums in general so if I speak out of place or anything like that I apologize ahead of time. So anyway, where do I start? I'll try to give you the short version. So I bought an LG Stylo 2(model: LG K540) through Cricket the day they came out. It was $170 phone. On the second day of using my new phone I got the bright idea that I'd try and root it BY MYSELF. I knew better but for some reason I had this false burst of confidence & thought I had everything under control. Well, thanks to Kingroot that burst of confidence didn't last long and there I was with a 2 day old phone BRICKED. Reason I never posted on the forums is because I've got a buddy who , in my eyes, knows everything there is to know about Android and thats who I'd normally go to when I wanted to root a phone so he's who I immediately turned to but even he couldn't figure it out. He couldn't help me unless we had the stock firmware or someone with the exact same phone and according to him we could some how use a backup of that phone to fix mine. Cricket just wanted to sell me another phone even though I was standing there with a 2 day old phone and LG just wants me to send the phone in to them, which I have no desire to do. I've searched all over the internet trying to locate the firmware because even I can fix the phone if I had that but nothing. Had hoped by now LG would have released the firmware but at this point who knows when that'll happen. I'd even pay for it at this point. Anyway, just thought I'd give the forum a shot on the off chance someone might be able to help me or point me in the right direction. Oh and if you were wondering what the phone does now, when I turn it on the LG logo appears like it should but then right as it appears you see a message in red lettering that says: BOOT VERIFICATION FAIL!!- CAUSE: MISMATCH_SIG_LEN And it just loops this over & over until you pull the battery out. Please someone help me!
Click to expand...
Click to collapse
you can go into download mode by pressing volume up key and inserting usb cable .press the volume up until you see download mode a firmware readed by z3x box is available on clamgsm forum you can flash it with z3x box crack .