[Q] Have I ruined my in law's phone? Please help - General Questions and Answers

My father in law bought a new phone SGS on O2 and I offered to unlock it as I have unlocked my husbands last week (he's was on O2 as well but in 2.1 or 2.2.1 version I think-froyo?)
Before I continue may I say I know you guys out there know so much more than me and I really need your help. I really tried to help unlocking this phone and for hours I searched and read things like reboot, download mode, recovery mode, flashing, JKV and so many other words and letter that I could not understand. Very few I understood in the end but may have messed up badly (?).
Please, I need help and please treat me as if I were your mum or even grandma. Step by step in simple normal English please.
My father in law's version is 2.3.3
I tried unlocking it the way I unlocked my husband's but didn't work after looking for hours I thought that the best way to do it would be to downgrade from 2.3.3 (gingerbread (?)) to 2.2.1 (froyo (?)) and then unlock it.
I found this:
http://forum.xda-developers.com/showthread.php?t=1089989
and tried to follow it.
I downloaded EZRom and EZboot-Froyo-1.0.tar.md5 from the same post.
I followed:
•Download the right version from section above
•Reboot your phone into Download mode
•Connect your phone to computer
•Run EZOdin
•Select EZboot-Froyo-1.0.tar.md5 or EZboot-GingerBread-1.0.tar.md5as a PDA file in EZOdin
•Check the "Phone Bootloader Update" checkbox
•Click Start
I waited for the phone to turn off and feel the little vibration but didn't. Instead it just froze at the first screen when you turn on the phone. The black background with white letters: Samsung Galaxy...
I waited and waited and as nothing was happening I then I took the battery out. Put it back in and tried turning it on. I wouldn't it would just stop and that same screen, the black and white one.
I reread
•Wait until phone reboots and make it reboot into Recovery
SO then I remembered in the many threads I read about the recovery mode so 3 clicked vol up + button at them bottom and turn on bottom.
It gives me a few options. When I click on reboot all it does is show me the black and white screen again and nothing else. ah!!!
I took the battery off and put it back on may times, also selected the fatory reset option and tried different buttons but nothing. Please help me.
I'm happy to phone any of you guys to help me and guide me even if it's just to put the phone back to what it was before, turning on normally, etc. (I can't even turn it on!) I'm feeling really sad and a bit stressed as these days are supposed to be a nice time to spend with my little ones and family.
Anyway, please ask me anything.
Thank you so much in advance. I really hope I didn't do anything wrong and I'm just stuck because I'm ignorant in this matter. Thank you

Well, I have no skill in this area. But I wish you good luck, and this post is acting as a bump! Double goal!
After a little rethinking: (I don't have a SGS and never touched one) You can try re-stocking the phone. Not sure how you do that. I'll check.
From http://forum.xda-developers.com/showthread.php?t=723596 :
Darkstriker said:
(E) Recovery:
1.WHAAAA! I think I bricked my phone. My flash was unsuccessful/My device boots to a black screen/similar scenarios. Can I still save my device?
1.WHAAAA! I think I bricked my phone. My flash was unsuccessful/My device boots to a black screen/similar scenarios. Can I still save my device?
Most likely: YES! In almost any case, you should still be able to turn off the device (if necessary by removing the battery) and start into download-mode (VolumeDown+Home+Power) or recovery-mode (VolumeUp+Home+Power). After (for example) an unsuccessful flash, you can retry the flash in download-mode (same steps as when flashing a functioning device). If a flash to a functioning f/w (without applying any update.zip) doesn't help or you cannot get your PC to flash at all, you can ask for help here.
If you see a symbol asking you to connect to the PC, depending on how you arrived at this point, it may be sufficient to connect to the PC and run Odin (i.e. press "start" when the phone is recognized) without adding any files. This may, however, leave some residual issues if (for example) had an incorrect/incomplete flash so you may want to do a normal flash after this!
If you do not have download mode and for some ludicrous reason felt the need to go ahead and modify your firmware regardless of this lacking, there is now a guide on creating a home-made JIG which will force your device into download mode without the actual button combo here.
Click to expand...
Click to collapse
If you need any extra help, I'll try.

Im somewhat of a rookie user too but I do know this, If you can still go into recovery/download mode (using the 3 button combo) then you havent bricked the phone and you can fix it! so dont stress too much .
EDIT: Im guessing you can download a stock ROM and flash it via odin.

[/QUOTE]
After a little rethinking: (I don't have a SGS and never touched one) You can try re-stocking the phone. Not sure how you do that. [/QUOTE]
Thank u so much for your reply. O don't know what re stocking is, but i will look into it. Thank u!

I don't know how to re stock it.
Sorry to seem so dumb.
Can anyone help me step by step? If at all possible could I phone someone to help me with this? Send me phone number via private message
Thank you sooo much.

anaki11 said:
I don't know how to re stock it.
Sorry to seem so dumb.
Can anyone help me step by step? If at all possible could I phone someone to help me with this? Send me phone number via private message
Thank you sooo much.
Click to expand...
Click to collapse
Well, no problem, I guess. I don't think it needs to come to voice support, to be honest. I think text is enough for the issue in matter. I'll look a bit into this, I'll have to go soon from my computer. I'm sorry if I can't be of any greater help.

moses992 said:
Im somewhat of a rookie user too but I do know this, If you can still go into recovery/download mode (using the 3 button combo) then you havent bricked the phone and you can fix it! so dont stress too much .
EDIT: Im guessing you can download a stock ROM and flash it via odin.
Click to expand...
Click to collapse
Your post helped me not to stress too much.
I'd like to download a stock rom and flash it but I don't know how to.
Here's where I am. I found a list of firmware. This is the last one on Samfirmware.com.
Europe Samsung I9000 Firmwares.
I9000XXJVS ##
512.PIT
2.3.5
2011 September 8
CSC = I9000OXAJVS
DOWNLOAD
Things I need: (I think)
-Download a firmware (should I use the lastest one?) or 2.2 or 2.3.3? . Is there one better than the other? or is it my choice? How can I choose the best one for me?
-Odin. I have OdinMultiDownloader v4.03 in my desktop. Is that the best thing to use or should I use Ezodin. I don't know what the difference is.
-(Do I need to download or do anything else?)
Things I should do:
-Put phone in download mode
-Plug it to the laptop
-Open Odin (or Exodin?)
-click PDA. Choose the fie I downloaded-firmware.
(-after this I don't know what else I should do or tick or untick)
Am I in the right track or completely off it?
Thank you again to anyone taking the time to read this.

anaki11 said:
Your post helped me not to stress too much.
I'd like to download a stock rom and flash it but I don't know how to.
Here's where I am. I found a list of firmware. This is the last one on Samfirmware.com.
Europe Samsung I9000 Firmwares.
I9000XXJVS ##
512.PIT
2.3.5
2011 September 8
CSC = I9000OXAJVS
DOWNLOAD
Things I need: (I think)
-Download a firmware (should I use the lastest one?) or 2.2 or 2.3.3? . Is there one better than the other? or is it my choice? How can I choose the best one for me?
-Odin. I have OdinMultiDownloader v4.03 in my desktop. Is that the best thing to use or should I use Ezodin. I don't know what the difference is.
-(Do I need to download or do anything else?)
Things I should do:
-Put phone in download mode
-Plug it to the laptop
-Open Odin (or Exodin?)
-click PDA. Choose the fie I downloaded-firmware.
(-after this I don't know what else I should do or tick or untick)
Am I in the right track or completely off it?
Thank you again to anyone taking the time to read this.
Click to expand...
Click to collapse
In my thoughts, I believe that should be what you need. You can try, if that doesn't solve the issue, it's because you need something else as well.
And the think you should make the file a PDA file, I believe. Don't take my answer too direct. I'm almost unknown with Samsung devices on that matter, but I can say a couple of things, like, that, I'm pretty sure it is on PDA files.
And no problem, always pleasing to help someone in trouble. I was/am a rookie too Ignore the Senior Member thingie. Still a noob in pretty much everything. And don't panic, no need for that.

Thank you. I should try that tonight unless someone stops me before to tell me I'm about to make another mistake.

anaki11 said:
Thank you. I should try that tonight unless someone stops me before to tell me I'm about to make another mistake.
Click to expand...
Click to collapse
Haha. I doubt it. 99,99% of actions are reversible, really. And I have severe doubts that this is one of the remaining 0,01%.
Well, I wish you good luck. If you ever need any more help, you can post here. I'll look into here time to time.
BTW. Just wait a second. You know that link you give on the first post? There's also a Gingerbread file. You can *try* flashing that one, to see if it reverses the problem. Sounds legit to me.

Youtube.com/qbking77
He has tons of tutorials
Sent from my SPH-D700 using Tapatalk

Related

bricked my captivate?

i tried doing this: http://forum.xda-developers.com/showthread.php?t=1127249
and i failed, i got the first part down and i saw the red fish which is the devs logo. then the second part with the kernelKF1.tar file i guess i screwed up, because on reboot it would loop, it would go to at&t screen then it would show my screen really screwed up, with a whole bunch of colors and what not like as if it was tripping on acid haha. anyways now when i turn on my phone it shows a logo of a phone, a yellow triangle with an exclamation mark next to a computer. I do not want to lose all my apps and what not, i mean i doooo have 27 hours on my final fantasy 7 lol. so please guys what do i do to bring my phone back to life so i can try to root and flash a ROM correctly this time.
Does it say something about firmware upgrade failure, use recovery mode?
Yep. It's a soft brick so you can recovery it!
First: You must flash AT&T Gingerbread Bootloader from here: http://forum.xda-developers.com/showthread.php?t=1129821. (You must go to download mode by Vol Up + Vol Down + USB Plug or use a jig (google: Jig Captivate)
Then: Flash your kernelKF1.tar again (Download Mode) or Another kernel you like for KF1! (I prefer you flash this kernel: http://forum.xda-developers.com/showthread.php?t=1127322)
That's all!
-how do i access recovery mode? says nothing about an update failure.
-that's great news! does it matter that i was on 2.1 eclair first? back in the day i rooted my phone on the stock eclair and i beliiiiiieve did a lagfix as well, but no custom ROMS or anything like that.
-I use odin to flash both the bootloader/kernel correct? on odin i just have to wait for it to says "connected" in that little chatbox right? one of the box's all the way to the top isn't supposed to say anything until its passes right?
sorry for all the real dumb and seemingly obvious questions. But i want to make sure i know what i am doing so i can always do it correctly. thanks for all your help and quick replys guys i really appreciate it!
nismoasfuh said:
-how do i access recovery mode? says nothing about an update failure.
-that's great news! does it matter that i was on 2.1 eclair first? back in the day i rooted my phone on the stock eclair and i beliiiiiieve did a lagfix as well, but no custom ROMS or anything like that.
-I use odin to flash both the bootloader/kernel correct? on odin i just have to wait for it to says "connected" in that little chatbox right? one of the box's all the way to the top isn't supposed to say anything until its passes right?
sorry for all the real dumb and seemingly obvious questions. But i want to make sure i know what i am doing so i can always do it correctly. thanks for all your help and quick replys guys i really appreciate it!
Click to expand...
Click to collapse
1. Use combo keys: Vol Up + Vol Down + Power to access Recovery. If you are on AT&T Gingerbread Bootloader, you are good to go!.
2. You must disable lagfix before flash any rom. You can go stock and reflash it but i think you must get KF1 work to backup your game process!
3. If you flash KF1 with bootloader, you needn't to reflash it again. Just reflash kernel and you are unbrick. (If you are on AT&T Gingerbread Bootloader, on screen PC -- /!\ -- Phone, you can run ODIN and reflash kernel KF1. No need to go to Download Mode to flash kernel. If you can't flash from ODIN (try some time, change USB port, change PC, and reinstall Windows), you must reflash AT&T bootloader.
Good luck!
at&T gingerbread bootloader is a program like odin? or does it literally mean the booting of a gingerbread device? im so confuuuuused.
So i have to flash a stock 2.1 eclair? then do the kf1 file to get to 2.3.3 gb?
nismoasfuh said:
at&T gingerbread bootloader is a program like odin? or does it literally mean the booting of a gingerbread device? im so confuuuuused.
So i have to flash a stock 2.1 eclair? then do the kf1 file to get to 2.3.3 gb?
Click to expand...
Click to collapse
its questions like these that make people say 'read, read, read, read, then read some more'
the answer is literally everywhere in these forums......
i just made it so much worse, i used the gb bootloaders as well as used that ROM by using the kernel and a previous file in odin. i can still go to download/recovery, and if i just power on the phone it will loop at the at&t screen
when i get to recovery, the vol bottoms dont let me select anything. so my only option is to keep rebooting. i cant apply update from sd; even though im sure its because im doing it wrong!! someone please help i need this phone for the upcoming work week didnt think it would take 4 days to figure out.
Can Someone Please Please tell me step by step what i should do, i understand how to work the programs i just dont know the order in which to do them in. what am i to do? remember i was initially on 2.1 eclair with a voodoo lagfix, yet, i dont know what i am on know, i tried flashing ROMS as well as gb bootloaders.
so your volume buttons are broken?
just boot into download mode, flash back to stock with ODIN or Heimdall, whichever is easier for you to use, then leave your phone the fk alone, because you are compounding the problems by panicking.
its obvious that you havent truly understood what you have been flashing on your phone, and you are about to wind up with a pretty brick that will need to get sent to jtag/unbrickable mod.....
until you understand and comprehend what you are doing, leave it the hell alone, this isnt childs play here
Pirateghost said:
so your volume buttons are broken?
just boot into download mode, flash back to stock with ODIN or Heimdall, whichever is easier for you to use, then leave your phone the fk alone, because you are compounding the problems by panicking.
its obvious that you havent truly understood what you have been flashing on your phone, and you are about to wind up with a pretty brick that will need to get sent to jtag/unbrickable mod.....
until you understand and comprehend what you are doing, leave it the hell alone, this isnt childs play here
Click to expand...
Click to collapse
well said..
so have I lost all my apps? even flashing back to stock?.....and no, volume buttons are not broken.
i have the "firmware upgrade fail" and cant get into recovery...
OK! So i finally got the phone up and running late late last night. its on firmware 2.3.3 on build: cognition v2
kernel version: 2.6.35.7-I897UCKF1-CL273832
its definitely GB; thats something obvious. yet, i cant shake the feeling that it still feels slow. i ran quandrant and its a shy 1040. I know, I know, quadrant scores dont mean anything, but still.... i would think it would be in atleast the 1300+ especially with the lagfix from cognition5.
nismoasfuh said:
OK! So i finally got the phone up and running late late last night. its on firmware 2.3.3 on build: cognition v2
kernel version: 2.6.35.7-I897UCKF1-CL273832
its definitely GB; thats something obvious. yet, i cant shake the feeling that it still feels slow. i ran quandrant and its a shy 1040. I know, I know, quadrant scores dont mean anything, but still.... i would think it would be in atleast the 1300+ especially with the lagfix from cognition5.
Click to expand...
Click to collapse
If you know quadrants mean nothing then why are you looking to get a higher score?
But in all seriousness, I think were all a little surprised to see that you have a working phone and even more so one with a custom rom. You need to read up on here before you start messing with things again or your going wind up with a brick.
let me quote Mr. Haley here
its obvious that you havent truly understood what you have been flashing on your phone, and you are about to wind up with a pretty brick that will need to get sent to jtag/unbrickable mod.....
until you understand and comprehend what you are doing, leave it the hell alone, this isnt childs play here
well said..
Click to expand...
Click to collapse
Basically, nobody on here is going to offer you help until you attempt to help yourself. This isnt a support forum. None of it is. We are just kind enough to help you out. But its super annoying to see you put yourself in situations that we warned about then come back on here with OMG I THINK I BRICKED! So spend time reading and please realize we have 0 obligation to help if you brick.
capocaccia said:
If you know quadrants mean nothing then why are you looking to get a higher score?
But in all seriousness, I think were all a little surprised to see that you have a working phone and even more so one with a custom rom. You need to read up on here before you start messing with things again or your going wind up with a brick.
let me quote Mr. Haley here
Basically, nobody on here is going to offer you help until you attempt to help yourself. This isnt a support forum. None of it is. We are just kind enough to help you out. But its super annoying to see you put yourself in situations that we warned about then come back on here with OMG I THINK I BRICKED! So spend time reading and please realize we have 0 obligation to help if you brick.
Click to expand...
Click to collapse
Actually, it was me that said it.
Sent from my SAMSUNG-SGH-I777
And I just agreed with him.
thaaaanks for the life lesson; but I wouldnt be able to sit here and tell you im Running a custom ROM unless i did do my research. The time differences between my posts was me literally finding and reading countless articles. I'm asking questions not figuring out fallacys..
Don't be so defensive, they weren't talking down to you and belittling, just making sure you don't end up in a worse situation. Looking out for your best interest.
I know that....If my posts were that bad at least show me the simple corrections.I know the value of my phone, ill deal with it if it comes to that and even then nothing has happened since. Regardless, I got out of the soft brick and now I'm on DG's 2.3.3.

[Q] Samsum Galaxy Fit No Boot

Greetings.
It doesn´t boot.
First details:
Galaxy Fit rooted and 2.3.4 Gingerbread (worked fine)
I downloaded rom-manager and wanted to change to custom roms.
So far.
As I tried to install clockwork I found this in your forum:
http://forum.xda-developers.com/showthread.php?t=1339640
and did everything exactly written there
then restartet, started rom-manager and chose the first option (Clockworkthingy).
As there was a choice of the device, I didn´t find my device and chose the last in list (which did´t work and then I picked the first in list and accepted.
downloaded syanogen 7.0 and after download and backup-chose it told me it would reset and start in recovery ... that was the last I´ve seen from my galaxy ...
Is it broken now.
Please help!
note: tried to start recovery with vol+, home and power as well as usual way to start it. without success
Come on. Some of you Guys are able for sure to tell me, if it is hopeless or there IS something I can do to get it working again.
I know nearly nothing about Smartphones and stuff so
Please!
Rodsengard said:
Come on. Some of you Guys are able for sure to tell me, if it is hopeless or there IS something I can do to get it working again.
Please!
Click to expand...
Click to collapse
Sorry to say that your phone is bricked.
First, rom manager doesn't support your device.
Second, you are an idiot that you selected unknown device from list to make it work.
Third, the thread doesn't have any tutorial about rom manager it is CWM that is meant to be flashed using odin.
Fourth, I probably this is hard brick and nothing can be done.
IN MY VIEW GO TO THE SAMSUNG SERVICE CENTER AND TELL THEM THAT YOU LEFT YOUR FOR CHARGING OVERNIGHT AND ITS NOT BOOTING.
THEY WILL SURELY HELP FOR FREE AS THEY DON'T KNOW WHAT YOU DID AND THIS IS AN APPROPRIATE REASON.
Thank you for your honesty.
Your phone still can be fix up. Your phone not brick yet.. Your phone might get bricked if it running out of battery during flashing, like a half way flashing, then you are in the worse case scenario.
Recovery mode unavailable? Forget about recovery since it has been.broken. What important now is to get access to download mode by pressing vol down + power + home key. If you can access download mode, then your phone can be fixed in 5min.
Read this, before you go any further, if you sure that you already successfully flashed any rom before it went brick. Just do this simple step, for cm7, u need siyah kernel, go download (siyah 2.1.1 .tar)... Not .zip.
Remove your battery then put it back, get into download mode then flash siyah 2.1.1 with Odin 1.85.if your phone already flashed cyanogenmod7, then your phone should boot up and work properly.
If it doesnt work, click the link on my signature, follow all steps provided tp get back your to work as stock. Then start flashing again.
Ps : dont use backup, dont use romanager.
Sent from my GT-I9100 using xda premium
My guide is for SGS2 International. Not ATNT, please find stock rom for your phone version. But the flashing method are just the same..
Sent from my GT-I9100 using xda premium
Thank you for your efforts neobirdrio, but as I wrote above, nothing works.
No combination with vol+ or - and the 2 other HW-Keys.
But if we are still in Topic, what exactly do I have to do with an intact Galaxy fit to flash it to a custom ROM.
What Custom ROMS would run with it?
Where Do I get the Newest Version?
And is it worth changing it?
I wanted something special, something faster than Gingerbread and (of course the original Froyo on it), including something needs less Space.
Could you advice me?
(I ordered a new one swince it happened)
Try read this post,
http://forum.xda-developers.com/showthread.php?t=1120880
Latest stock firmware for galaxy fix is 2.3..which is gingerbread.
Sent from my GT-I9100 using xda premium
Still trying this out.
Did it in this way press three Keys, push batery in and so on ... One time on my netbook it came to life by meaning system told me, that it installs driver (seemed to be recognized right) and ODIN told, there is a connection. I started ODIN (which was prepared to do Gingerbread onto it) But it did nothing. I am not sure if I startet Odin with Adminrights, soooo ... Do now backup of the partition, put a much earlier backup on my PC and try it again (I am running out of PCs, so I simulate, that this is a new Computer )
I keep you informed.
Thanks again so far.
Tried it again, but it didn´come back to life
So Thanks to all ppl helped me.

[q] Help Boot Loop! WIND

I don't know where to post this, I'm coming here all panicked and retarded, so I'm apologizing in advance.
I literally bought my Galaxy S 4G from WIND (Canada) this morning. From what I understood, upgrading the OS was dangerous, all I wanted to do was root... I followed this guide: ht tp ://w ww.gal axyforum s.ne t/forum/off-topic-forum/5053-rooting-tutorial-here-posted-permission-t-mobile-galaxy-s-4g-gingerbread.html (remove spaces)
which I found in a post on these forums. Someone who also was on WIND said it worked fine for them... They were rooted. I foolishly tried it, everything seemed FINE. When I load CWM it can't mount my SD card. I don't know what to do, it's stuck in T-Mobile boot screen loop if I try to exit.. I literally just stopped crying. My dad is going to KILL me if he finds out I ****ed up the new phone I just bought HOURS ago. I don't know what the **** to do, I don't know what's wrong. I need help, please. Anybody know what I can do? I don't care about rooting, I just need my device to work. Please, someone, anyone with any idea, what should I do? I can get back into download mode, and CWM. Is there anything I can do there? There's a recovery guide pinned but it says it's for the T-Mobile version, which I read is the same, can I use that to fix my phone?
This is my first Android device, I've never owned one before. I don't know ****, I shouldn't have tried anything... I just got cocky and made a mistake. I'm usually very good with this kind of stuff. Please someone tell me if there's something I can do to fix this, please!
I'm sorry if I sound stupid, I'm trying not to, I'm just really panicky and stressed right now.
I've tried searching through the forums - I still am searching through them, I'm sorry if I missed a post that can help me.
EDIT: I found someone who is also stuck in a boot loop... He seems to have SD Card issues as well, but doesn't speak English very well, so I don't thing he was able to communicate what his issue was...
Quote:
Originally Posted by GMK63
.......(---------THAT WHAT I FOLLOWED .
But I did the first part and They said i should get the stuff I store on my SD Card to pull out a file (``12) In CWM, use your volume up/down positions to navigate, scroll down to "Install Zip From SDcard". Select with a click of the power button. Navigate to where you put sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip (in the root of your SDcard) and select with the power button. Confirm you want to install.
``)
but it doesn't give me the option to go get it on my SDcard and Now my Phone just turns on and off with the samsung galaxy S logo plus T-mobile exclusive logo . The only possitive thing about all the damage is that I can still put my phone on dowload mode and I just think if someone knows how to get my phone back to it state they will need me to put it on download mode.
Thank you in advance for your Help, for replying and offering to help.
I appriciate it. My phone is Mobillicity carrier just like wind .[/B]
Then, user bhundven replies to him saying:
Ok, this is really simple. I've explained it in quite a few threads in the Galaxy S 4G forums in General, Q&A, and the Dev forum. I'm going to explain this, but in a way to be more general. So I'm being verbose in case anyone else with a T959W happens to run across this and has not tried anything yet.
Again, I'm not good with windows at all, and I prefer it that way.
If you're on windows, check out our wiki:
http://forum.xda-developers.com/wiki...xy_S/SGH-T959V
There is tons of help there for setting up heimdall on windows with all the right drivers and such.
Once you have heimdall setup get AntonX's latest cwm zip for his kernel.
This kernel is a BML kernel, and this guide I am giving you right now will help you get cm9 installed which is an MTD kernel. You can find out more about BML vs. MTD here.
Once you have downloaded AntonX's kernel, extract the zImage from it and open up the terminal/cmd prompt and navigate to the directory you extracted the zImage to.
Put your phone into Download Mode and type the following in the command prompt:
Code:
heimdall flash --kernel zImage
The heimdall program will flash this kernel+initramfs to the kernel partition and reboot the phone. Do not unplug the usb cable until you see the "Galaxy S" screen. When you see that screen, unplug the usb cable and remove the battery from the back.
Assuming you downloaded CM9 and put it on your sdcard already, you can get into recovery by holding the vol+ and vol-, then pressing the power button to turn the phone on. When you see the "Galaxy S" screen, let go of the buttons, and you should be in the recovery now.
This is where things get a little tricky. If you have not tried to do anything to your phone yet. This would be a great time to use the "Backup and Recovery" menu on CWM. Do a full backup.
The "assert 7" error that the previous person got was because the cwm install script (the updater-script) checks the already installed /system/build.prop's data against the "to be installed" build.prop to verify this rom can be installed. If it doesn't exist, then it moves forward.
So the first order of business is to wipe the /system partition. Go to "Mounts and Storage" and format the system partition.
Now go back to the main screen and do "Factory Reset/Wipe Data".
Now go "Install zip from sdcard" -> "choose zip from sdcard" -> and use the volume keys to select the zip file.
After the rom is installed, navigate back to the main screen and "Reboot the system now" if it doesn't reboot by itself.
When the phone reboots, because it is going from BML to MTD, it obviously can't just install the files to what would be an MTD partition if the kernel knows nothing about MTD. So it boots into the newly installed MTD kernel and continues the installation, which in the end will also reboot again.
The first boot is very slow. It is building a cache of all the pre-installed system applications. Let it sit for a while. I know it's tempting to go play with your phone right away, but resist if you can.
The next CM9 release will be on a different kernel, and albeit a much better rom.
I will also be adding OTA Asserts for SGH-T959W so that you will not have to wipe /system before installing the rom, but I do that still just for good measure. But this also means that your phone will work properly with the google play store.
If this still does not work, please let me know what went wrong and I will be happy to assist!
-Bryan
Is what Bryan is saying my solution? I don't think he understood the SD Card mount issue. Does anyone know how to fix that? I really hope to hear from you guys ASAP before my dad catches on... Please. I really need help. I'll search more in the morning, it's 1 AM here.
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's true, just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Sent from my HTC VLE_U using xda app-developers app
lonoguge said:
Okay well first of all.. GET A GRIP OF YOUR SELF
*slaps twice across the face
This phone is unbrickable so can you get in to download mode? (power off phone then when it's off hold the volume up and down buttons at the same time, while holding them down connect your phone to a usb cable)
A green android digging thing should show on your screen. Tell me when you get this far.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Thanks for the slaps, I needed them!
Yes! I think I am still able to get into download mode, atleast I was able to last night (After the loop issue). Also, I formatted (factory reset option or something?) my settings when I was in CWM last night assuming that would change it back to the way it was, or atleast fix the SD mount problem..I hope this doesn't cause any issues.
What should I do when I'm in download mode?
bkoon1218 said:
As a matter of fact, you don't entirely need a download mode screen to recover your device too. I've gotten to a pixelized colorful screen and thought my phone was done for, but Odin/Heimdall still recognized it, so I was able to recover my phone.
Calm down and as long as your phone can still be detected on your computer, you will be fine. Odin or Heimdall should be able to show that he device was "added" when you plug it in.
Click to expand...
Click to collapse
That's great news! It's nice to hear that someone who's phone was also messed was able to repair it.
lonoguge said:
That's true, *just make sure you have the drivers installed for the phone first and for the purpose of my method of recovery download Odin. *If you did everything correctly you'll see a green light in Odin under recognized devices once you're in download mode
Click to expand...
Click to collapse
Where can I get these drivers? Should I download the latest version of Odin?
I'll try this as soon as I get back from taking my little sister to school.
I just want to say again, this is the SGH-T959W from WIND in Canada. It's apparently the same hardware as the SGS4G from T-Mobile, just different software. I hope this isn't a problem.
Thank you both for replying so soon. After tossing and turning in bed for the last 5 hours, barely getting any sleep, it's such a relief to read these posts!
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
getochkn said:
Obviously you didn't read too much if you bought the phone and tried to mess with it the same day. You would have seen if you went to the 2nd page of here and actually read something like this, http://forum.xda-developers.com/showthread.php?t=1552119 where I clearly say, it is it different, you will get boot looped, I am working on a package to fix it, and for anyone on a wind phone to hold on and wait.
I don't have time to try and help and fix every single wind phone in the world because people get too impatient and start flashing everything in the world from the first post they read. Odin and Heimdall fail at certain parts of flashing this phone. I am trying to give the Heimdall creator as much as I can to help fix this, so everyone telling to flash this or that package, it's not going to work, it will fail. I have verified this 100 times with Heimdall.
I can't put together a 1click package that fails flashing, that's why people are ending up in this position in the first place.
I can get your phone fixed but not right this second. There is no permanant damage done, and the less you just keep flashing random stuff, the more likely the chance I can help you fix it, but I'm busy, I run my own business and my paying customers come first as does my mortgage and bills before spending an hour teamviewed into someones pc to fix this.
So hang tight, I will try later to get this fixed, it's not screwed, quit flashing anything you find.
Click to expand...
Click to collapse
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU!
I really didn't read enough, big mistake, I was just really cocky because I've modded almost every device I own (Wii, PSP, PS3, PS2 various and iDevices [mine, and friends]). Of course, they're all different (Not saying it's all the same thing! ), I just felt very confident because I've never had issues with anything before. At least this is a good learning experience, I've really been put in my pace. I always felt that bricking was something that happened to other people, it doesn't happen to me. I know that sounds stupid, but idk, that's just how I felt. I physically feel sick over this 'whole ordeal (Seriously), I'm such an idiot. >.<'
Thanks for the warning, I won't flash anything! I'm so relieved to hear that there's no permanent damage done, and to be able to speak to someone who's familiar with this specific problem and this specific model of the SGS4G, AND is willing to help me!
Do you know when you'll be able to help me? Of course, take your time, I completely understand that you have other stuff going on, I'm just wondering to see if I can maybe think of some cover up so my dad doesn't find out.
Also, I have a 14 day warranty, is it void now even though the root didn't work? I'm assuming it is.
Edit: Yup, if what jeffsf says is true, it's void.
jeffsf said:
Past what getochkn just said (and please do ignore the "advice" given by people who don't experience with a T-959W), next time you see a "helpful" post on some site that starts off "get this from [the original source]" -- please, please take the time to read the original source.
Secondly, just because your phone has the a similar "trade name" as another phone doesn't mean they are even close to the same inside. Even the model numbers don't mean much. Firmware from a T-959 generally won't work on a T-959V, and, as you have found out, T-969V firmware can make a T-959W a nice paperweight for a while.
Thirdly, I just don't "get" why people even consider flashing their phone on the first day they own it, before they have any idea what it came with and what it can do, not to mention voiding their warranty before even the buyer's remorse period has expired.
While you're waiting for someone to bail you out, you might want to take the time to download Java, the Microsoft C++ executables, and a full version of Heimdall.
Click to expand...
Click to collapse
I'm just very impatient sometimes. I really do enjoy doing this kind of stuff, it's fun for me. I just got really excited and wasn't thinking straight and just went out and tried rooting it. I've wanted an Android for a while now, and have always planned to root it to unlock it's full potential. I've never modded anything else day 1 (and never will again), this is the first time I've done this. I feel terrible about it.
Will do, thanks for helping, jeffsf.
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
hechoen said:
If your still under 14 days return it with a stupid I don't know what happened look. If its stuck just on the tmob screen they most likely will never know what you did. Your other choice is to be a man and own up to it. Tell your dad and take your lumps. That choice is yours. Give it serious thought before you choose as it might define what type of person you end up becoming.
Click to expand...
Click to collapse
I feel like they might know. I'm willing to try it as a last resort, I'd like to give getochkn a shot first.
I'll tell my dad what happened after it's fixed. I just can't deal with him stressing me out about it more than I already am.
I will have a package probably tomorrow that will provide as detailed instructions as I can.
getochkn said:
I will have a package probably tomorrow that will provide as detailed instructions as I can.
Click to expand...
Click to collapse
Oh, wow! That's much sooner than I was expecting! Thanks for taking the time to do this for me, it really means a lot. Thank you so much getochkn!
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
getochkn said:
Package and instructions here.
http://forum.xda-developers.com/showthread.php?t=1956025
Click to expand...
Click to collapse
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
BagelBreath said:
Thank you so much getochkn!
I read all the instructions before attempting this. But, I have a problem. Heimdall failed to flash. It said something about failing to retrieve the PIT or something? So, I tried again. Didn't work. So, I restarted my computer, and my phone.
Phone doesn't go into download mode, instead, I end up on a screen saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
What should I do?
Click to expand...
Click to collapse
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
getochkn said:
That firmware screen should detect as download mode still in Heimdall. I have gotten that and reflashed from Heimdall before. Not sure why it's trying to download the pit, it should only do that when you tell it to download pit. Flashing shouldn't trigger that. See if Heimdall will detect it in that firmware recovery mode and I guess try again, otherwise your phone is really borked.
Click to expand...
Click to collapse
Thank you for the quick reply!
It worked! I really can't thank you enough! Thanks again for taking the time to do this!
I think it may have said "Uploading Pit" because it said it again this time, but it didn't encounter a problem when it did that.
I know I have 3 choices, the one I would like to choose is ICS. Would mind pointing me in the direction of an ICS ROM that's compatible with my device? I'm afraid to use something that may not work and mess up my phone again.
EDIT: Actually, I think I'll just stick with this. I just installed the twist kernal and the modem, everything works, I'm rooted and have recovery. I'd rather not mess with it until I'm more experienced with droids.
Thanks again everyone, especially you getochkn! I'm so relieved that my phone is working again! My dad didn't notice that I wasn't using the new phone I got, so I didn't have to cover up or anything.

[Q] Possibly bricked, can't enter download mode/recovery mode

Title speaks for itself.
I've been lurking the forums for a few months, so... Hi! My tech vocab is limited, but I catch on quickly. Please bare with me.
Anyways, Kies wanted me to upgrade my firmware on my 7.0, so like... Yeah. Stupid me didn't remember that the device was sitting in my lap and connected to my computer WHILE going through the upgrade, and I was feeling uncomfortable, and moved. By doing that, the USB unplugged from the device. I've tried going through with the upgrade via Kies after, but... Just no. Now my device is stuck on the "Firmware upgrade encountered an issue" screen, and no matter how many times I try to reboot it, soft reboot, entering download mode, it always, ALWAYS, goes back to that screen.
So, I plug it in again, and connect it to Odin. But... Wait! I don't have any of the files I need. So I look around and download files instructed by several people for my specific device, but I don't think I need them for this specific problem.
What exactly do I need to get, and how to I put it all together in Odin to make my device work again? I don't really care if all my files get deleted (although it would be great if I could keep them), I just need to get this resolved before Tuesday, since I have textbooks on it that I need for classes.
tl;dr I'm lost, and I need a push in the right direction.
Thanks in advanced!
First, I know how nerve racking this is so I am going to try, and help. I am new to Samsung, but I would think that a stock firmware flash from Odin would fix it. Look in the development forums for officials firmware, and download it. I would give you a link, but you forgot to post what model you have. It can be important. Good luck.
P.S. congrats on joining xda. Sorry it took this o bring you onboard.
Sent from my ADR6425LVW using Tapatalk 2
JeramyEggs said:
First, I know how nerve racking this is so I am going to try, and help. I am new to Samsung, but I would think that a stock firmware flash from Odin would fix it. Look in the development forums for officials firmware, and download it. I would give you a link, but you forgot to post what model you have. It can be important. Good luck.
P.S. congrats on joining xda. Sorry it took this o bring you onboard.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Ah! Thanks! I can't believe I forgot to post my model ahaha;
p3113.
I'll go ahead and look in that thread. If I come across any other problems, I'll post them here.
Update: I've clarified that I can't enter download mode. How do I go about flashing with Odin if I can't do that?
I got that screen before. Flash again using ODIN and a full charged laptop, do not load any pit file.
churuchu said:
Ah! Thanks! I can't believe I forgot to post my model ahaha;
p3113.
I'll go ahead and look in that thread. If I come across any other problems, I'll post them here.
Update: I've clarified that I can't enter download mode. How do I go about flashing with Odin if I can't do that?
Click to expand...
Click to collapse
looks strange
switch off your device completely, now just press power button and volume "DOWN" button simultaneously and dont leave them.
well, it should not show the "SAMSUNG GALAXY TAB 2 7.0" thing and directly boots the screen into the download mode.
do you mean that, even on doing this too u get the error message as prescribed by you in your above comments--->"error updating firmwire" or something like that??? cz manufacturers first check your device is under warranty or not by entering into download mode(by checking the binary counter) and then booting and checking for root apps(some manufacturers dont check this thing, they just check binary counter)
well for entering into recovery mode u ve to do the reverse----->power button+volume "UP" button, but in this case you it should show that "SAMSUNG GALAXY TAB 2 7.0" thing, as soon as it display you should leave your power button but keep pressing your volume"UP" button.
do you mean even on doing this too you get the same error message?????
if yes, then it is likely that your device is permanently bricked(well, NOT SURE), but then you should consult to samsung for a replacement if its within warranty, else there may be some advanced users or software developers in this forum who may help you, i am just an amateur, sharing my experience with such devices.

[Q] Tab 2 WILL NOT ROOT!!

Please, for the love of god, someone help me!!
I have spent the past 2 days trying to root my brand new Tab 2 (verizon) p3100 (android 4.1.2). I've tried every tutorial that I can find. I've tried various versions of Odin, various versions of heimdall, various versions of CWM and other rooting files. I get error after error. The device still works fine but it WILL NOT ROOT!!
I am currently trying to use Odin3 and CF Auto Root (my 100th attempt probably). Every time I use Odin, any version, any tar file, it fails with a "Fail! (Auth)" error. The message in download mode says "SECURE CHECK FAIL: recovery".
I've done a factory reset of the Tab. I've cleared cache. I've tried running Odin is an admin. I've tried different usb ports on my PC (Windows 7, 64bit).
It doesn't matter what I try, it always results in an error. This thing just WILL NOT ROOT!
Can anybody tell me what the problem is? Or another way to root? Please. This is driving me crazy!!
Thank you!!
Try this.
Huge problem
I found these instructions:
droidviews.com/how-to-root-and-install-cwm-twrp-recovery-verizon-galaxy-tab-2-sch-i705-on-ics-jelly-bean/
And finally got it to root. Then I got to the part where I installed the terminal emulator, granted it root access, and followed the instructions to install aboot.img. Then the Tab shut down, I thought it was going to reboot but it never started back up. Now I can't get it to turn on or go into recovery or download mode. Nothing. Everything was fine up to that point. Now nothing at all. How do I fix this??
ninasmith said:
I found these instructions:
droidviews.com/how-to-root-and-install-cwm-twrp-recovery-verizon-galaxy-tab-2-sch-i705-on-ics-jelly-bean/
And finally got it to root. Then I got to the part where I installed the terminal emulator, granted it root access, and followed the instructions to install aboot.img. Then the Tab shut down, I thought it was going to reboot but it never started back up. Now I can't get it to turn on or go into recovery or download mode. Nothing. Everything was fine up to that point. Now nothing at all. How do I fix this??
Click to expand...
Click to collapse
<facepalm>
Oh boy... WHY the heck did you flash a bootloader (totally unnecessary step to begin with) from a completely different device?!?! There is so much info on rooting P31xx here on XDA, describing several different methods in details, and yet you managed not only to find a way that is not even intended for your device, but to proceed with no understanding of the process whatsoever...
I would suggest to take a deep breath, and try again (and again) to get your tab started in download mode (hold Volume DOWN + Power until you see a warning screen). If you can do that, flash the proper ROM with Odin -- whatever version you can find, but the one for your device. Then promise yourself to NEVER do anything without at least a basic understanding of what you are doing.
If you can't get the download mode working, then look up the service centre. You have an option to play dumb and just say it suddenly died on you -- maybe, you get lucky and could claim the warranty.
EDIT: OK, I am really confused now... You specifically said you have a P3100, but you also mentioned Verizon. So, which one is it that you have -- GT-P3100, or SGH-i705??? These are very different devices! If you indeed have an i705, disregard what I said above (it's relevant to P3110), and start with this thread. It may not be as bad after all...
kt-Froggy said:
<facepalm>
Oh boy... WHY the heck did you flash a bootloader (totally unnecessary step to begin with) from a completely different device?!?! There is so much info on rooting P31xx here on XDA, describing several different methods in details, and yet you managed not only to find a way that is not even intended for your device, but to proceed with no understanding of the process whatsoever...
I would suggest to take a deep breath, and try again (and again) to get your tab started in download mode (hold Volume DOWN + Power until you see a warning screen. If you can do that, flash the proper ROM -- whatever version you can find, but the one for your device. Then promise yourself to NEVER do anything without at least a basic understanding of what you are doing.
If you can't get the download mode working, then look up the service centre. You have an option to play dumb and just say it suddenly died on you -- maybe, you get lucky and could claim the warranty.
Click to expand...
Click to collapse
It's not a different device. I have the Tab 2 from Verizon, which is the i705. I thought it was the same as a p3100 but I guess it's not because verizon locks it down more. The model number, listed in settings, is the i705. So I found these instructions and actually rooted it just fine using odin (finally). When it rebooted, I had super user and all was good. Until the part where it told me to do the aboot.img with the terminal emulator.
I have been trying for the past half hour and cannot get it to do ANYTHING. I've held down every combination of buttons and nothing at all. It will not turn on. It will not go into recovery. It will not go into download mode. Nothing. I plug it into the computer and it's not recognized by the PC (because it's not on). I've plugged it into the wall. Nothing. It will not do anything! I don't know what will happen if I try to take this back to Verizon.
ninasmith said:
It's not a different device. I have the Tab 2 from Verizon, which is the i705. I thought it was the same as a p3100 but I guess it's not because verizon locks it down more.
Click to expand...
Click to collapse
It's more clear now, thanks! I updated my post above, before I read your reply. i705 and P3100 are very different, not just because of customizations by VZW, but technically -- different CPU, chipset, radio module, everything.
One thing I can think of is to just leave it plugged in to the wall charger overnight, and try again. You might also want to ask your question in the respective thread that I linked above. But if you really can't get your tab to show any signs of life, you are out of luck, I guess...
BTW, here is another thread for you, related to unlocking the bootloader on i705.
kt-Froggy said:
It's more clear now, thanks! I updated my post above, before I read your reply. i705 and P3100 are very different, not just because of customizations by VZW, but technically -- different CPU, chipset, radio module, everything.
One thing I can think of is to just leave it plugged in to the wall charger overnight, and try again. You might also want to ask your question in the respective thread that I linked above. But if you really can't get your tab to show any signs of life, you are out of luck, I guess...
BTW, here is another thread for you, related to unlocking the bootloader on i705.
Click to expand...
Click to collapse
Thanks. Yeah I tried for about an hour. I had it plugged into the wall. It would not do ANYTHING at all. I took it back to Verizon and exchanged it. Now I just cross my fingers and hope they don't figure it out.
ninasmith said:
Thanks. Yeah I tried for about an hour. I had it plugged into the wall. It would not do ANYTHING at all. I took it back to Verizon and exchanged it. Now I just cross my fingers and hope they don't figure it out.
Click to expand...
Click to collapse
Good that they exchanged it for you. Better luck next time! Read those two threads I linked, it should give you enough info.
BTW, my apologies if I sounded like an a$$. To be fair, you said you had a P3100, and I didn't realize it was actually a different device until I noticed that you also mentioned Verizon. Looks like you tried to do the right thing, but somehow it went sideways. Well, sh!t happens...

Categories

Resources