Hello everyone, I hope I am not out of line. I just "aquired" an HD2 with wp7 already installed. It needs to be activated...but wait there's more.. I don't know what I have in terms of everything. not to mention volume down button is totally non functional physically and electronically. No external sound but vibrates. please see the information below and then please inform me as much as you can:
Phone has Red and Green Buttons/Not "all" white.
When booting...I can read the following at the top of the screen:
aMAGLDR 1.13
build feb 1 2011 03:46:07
by Cotulla 2011
booting wp7...
Then I go to Settings "ABOUT"
HTC HD7 T9292
Then "phone information"
Name: HTC HD7 T9292
Model: HTC HD7 T9292
Software: Windows Phone 7
Total Storage: 176.53 MB
Available Storage: 98.76 MB
"MORE INFO"
OS version: 7.0.7004.0
Firmware Revision Number: 2250.09.07401.605
Hardware Revision Number: 0002
Radio Software Version: 5.51.09.29_22.32.50.10U
Radio Hardware Version: A.12.0.D4
Bootloader Version: 0.96.2250.0
Chip SOC version: 2.2.5.0
Sorry so anal...What radio?? do I have? What should I use?
What Version Phone do I have? is it an american 1024? or euro 512?
Does it even matter? and why?
What MAGLDR should I use? Can I use 1.13 when someone calls for 1.12?
Due to my Vol Down button being broken/and no external spkr...Is my phone just a perfect example of "the walking dead"? Can I ever load it with anything else?
It has not been activated yet!
Am I able activate it with the obvious Hardware or Software problems already mentioned?
Sorry this is such a book, Yes I am a noobe and I simply love this Site.
My ultimate goal is to turn this phone into a wp7/android Dual Boot.
But if I can't...I already know I could love it as a wp7 after activation.
This is a list of present problems - No External Spkr (So I am using Vibrate)
Bluetooth searches but never finds anything. Wifi is sporadic, but It does work!
I strongly believe that the down button got broken when they realized it wasn't
working.
Are the problems I just mentioned due to a faulty Install?
I read the "WP7 Settings and Activation" threads and quite honestly i got scared,
which prompted me to write everyone here. Because if "You" don't know these
answers...Nobody does!
By the way I think Ya'll are smartphone "Gods".
Thank you in advance for any and all assistance with my dilema.
For the record...I bought this phone in this condition, and don't know any of it's history.
Can it be fixed without replacing hardware, AND can I make it a Dual Boot?
Thank You, PV
ps. I have an 8gb sandisk sdcard but it doesn't see it.
I am using it as a phone and it seems to do that perfect, but won't accept any
files, pics, music, etc. (it says Not enough space).
does it have T-Mobile written underneath the earpiece? if yes, then you got the TMo version with the 1GB ROM - which is better for flashing and provides more space...
I dont know about the volume button and flashing without it, but MAGLDR 1.13 would be backwards compatible with 1.12
afaik only Tmobile version has red and green buttons. correct me if I am wrong.
Thank you, xDhaha, I appreciate your help,
Next question: which "radio" do I need to use? or radio version do I have? is it 2.25? (this was obviously a shot in the dark noobie question)
I am trying to get as much info so that I can start working on this.
I have to activate it, also would like to try to set up a dual boot system if possible,
but I am still worried about the volume down button stopping me and could I brick my phone if I attempt anything without a volume down button.
Related
Hello, I have had an O2 XDA II for a year now. My company has just supplied me with the i-Mate equivalent (MDA III ???) , anyhow, I have noticed a couple of differences and would like to know what other there are...
the i-mate has th US version of the ROM installed, not the WWE .
It does not seem to have an extended rom,. or the extra 16M of 'storage' that the XDA II had, is this right??? I thought the two units were physically identical inside. Does this mean I will now have to install my programs into the normal Ram, I used ot put them into 'storage' to save my memory.
When the units are hard reset, they run an automatic program to set them up, I cancel this by pressing the reset button. I know the XDA II setup configures the unit with all of O2's software and icons etc. What does the imate version of the setup install?? I would like to know if there is anything useful in there.
THe setup program must be stored somewhere?? This I would asume to be the extended rom area as mentioned abvoe but I cannot seem to get the EXTrom tools to work any ideas??
Are there any other differences I should be aware of.
Thanks very much
Also, I have noticed that the Bluetooth icon is missing form the system tray, I used to use this quite a lot to turn the BT on and off, is there any way I can get it back??
Currently the only way to get to the BT is via settings,connections.
hi all. new guy here. I just switched from RIM to WM 6.1 w/ a hty Q5 (Hantel)
can't find much info on this phone besides how to buy it. Does anyone know about this model. After a week it has crashed and after restart and master clear it will not boot up at all. Just the first Blue Windows Mobile screen. it doesn't even get to the HTY Logo Screen and then shuts off after a few minutes. Have i destroyed my phone?
Please have you fix it?
jmannwrx said:
hi all. new guy here. I just switched from RIM to WM 6.1 w/ a hty Q5 (Hantel)
can't find much info on this phone besides how to buy it. Does anyone know about this model. After a week it has crashed and after restart and master clear it will not boot up at all. Just the first Blue Windows Mobile screen. it doesn't even get to the HTY Logo Screen and then shuts off after a few minutes. Have i destroyed my phone?
Click to expand...
Click to collapse
Did you fix it?
Do you have the firmware update?
Regards
iacovos
Did you find a firmware update for your Hantel HTY Q5? I need it for Windows 6.1.
As we dedicate here only to HTC devices you won´t get too much attention.
Better to try here:
http://www.comunidadwindowsmobile.es/rom_windows_mobile_61_hty_q5-t3327.0.html
Good luck,
You can try some of the Chinese forums, but be careful and read up on your model and make sure that you use the correct ROM, they make changes to hardware in the different generations of a phone model. Updating the ROM is straight forward, you put the ROM .img file in the ROOT of your TFlash Card, then when the phone is off push the center select button and then push the power button and the ROM will update from the TFlash. Good luck.
I own the hTY Q5 and I'm trying to snag a ROM from the Chinese sites but can't seem to register at any of them and none are in English.
We should petition the Admin of XDA to give us hTY owner our own section on this forum.
I need an English Rom for my HTY Q5 Windows 6.1
migoddard, first thing that you need to do is type in **168## on your phone dialer keypad. this will launch the HCIT Test program select Phone Info. Copy down the sting of numbers and letters you see there. Keep it for future reference. Next we need to determine which LCD screen your phone has, older models have the ILI LCD and newer models have the LG LCD. You cannot use a ROM for the LG LCD if your phone has the ILI LCD and a ROM for the ILI LCD cannot be used for the LG LCD. The drivers in the ROM .img file will not be correct for the LCD. Once you find out which LCD screen your phone has, you can check out some of the Chinese forums that have either Cooked ROMs and OEM ROMs. I have a WM6.1 ROM .img file for the LG LCD.
Appearently from what I have read over on the Chinese forums, upgrading your ROM is easy. Simply up the uploader.img file on an empty standard SD Tflash card turn off the phone put in the Tflash card, then hold down the select button (middle navagation button) and while holding push the power button. The phone will boot in bootloader then display "Updating ROM Image". Allow that to finish, phone will reboot with updated ROM. Make sure battery level is above 50%. before attempting ROM flash.
I have a Cect T5388i dual sim, clone of the HTC Touch Diamond 2.
After installing a keypad with T9, the phone re-started, but got frozen on the start-up welcome screen: Touch Diamond 2. Windows does not start anymore, and I can't connect it to my PC either. I tried to hard reset, and got this message: "Step 3 error while updating: File operate: File does not exist" (without SD card inserted, the message is slightly different because it doesn't find the card).
I guess the only way to resume the phone is to flash the right ROM through the SD card, but I can't find one for this exact phone. I've found it for the T5388+, but the processor, the ROM and RAM, and the display resolution are different from the T5388i.
These are the info I know about this phone:
Model: Touch Diamond 2 T5388i
Dual SIM, WIFI, GPS, 2 cameras
Processor: Marvell PXA310 - 806Mhz (shown, not sure if real)
Display Resolution: WQVGA 400x240
ROM/RAM Size: 512MB/256 (shown 288) MB (also not sure if real)
G-Sensor: Yes
Zoom Bar Functional: ? (didn't look like working)
FM Radio: Yes
The OS was Windows Mobile 6.5 (shown), build CE 5.2?... (don't remember the rest)
Please help with suggestions and hopefully with a working ROM for this phone, English or Italian.
I got the same problem What should I do? please help!
I've got the same problem...
Anyone help please...
I fixed it with the hard reset of the phone. First you have to get the ROM acording to your phone model (in my case was T5389i) may be searching in forums or contact with your dealer, then you have to copy the rom in the SD memory and put it on your phone. After that hold the 2 volume butons (up & down) at the same time and then press the ON button for about 3 seconds. Your screen should display a message asking you if you want to update your phone, you hit the answer button to accept; then follow the instalation and restore your phone.
Be sure to use the same ROM of your phone model, in other case you may not be able to fix it and in some cases brick your phone.
Aditional info can be found here: http://forum.xda-developers.com/wik...T5388i#Dual_SIM_T5388i_ROM_versions_.26_links
Hello.
The touch fuction of screen of my HTC stopped working from nothing but the display works and be operable by keys. A simple change of screen will solve or the problem may come from the board?
Best Regard
Sheppard
Sheppard06 said:
Hello.
The touch fuction of screen of my HTC stopped working from nothing but the display works and be operable by keys. A simple change of screen will solve or the problem may come from the board?
Best Regard
Sheppard
Click to expand...
Click to collapse
install the calibration screen to fix it
Working Thanks a lot u safed my phone )))
Hi.
It happened almost the same to my Polaris; for no apparent reason the touchscreen functionality stopped. After several attempts (removing battery and SIM card - waiting for any eventual static to dissipate; soft resets, trying to find any spot on the screen to reactivate it) I decided (i see now it was a bad move) to do a hard reset.
Now, every time i reboot, i get stuck on the "Screen Calibration" - meaning there is no way from me to apply the .cab suggested by Hakim Rahman.
Please, if you have any clue on how to solve this i really appreciate the help.
If any solution goes by using a new ROM or even installing Android it doesn't matter. However I don't know if it's possible to connect and sync the device with Windows or Linux and install the needed files, since I could only get up to the calibration screen.
Under Linux, after connecting the device I get:
$ lsusb
Bus 003 Device 019: ID 0bb4:0b0d High Tech Computer Corp.
---
Specs:
POLA100
SPL-3.13.0000
CPLD-2
Processor: MSM7200-400MHZ
Rom Vers.: 3.13.410.0 PTG
Rom date: 08 24 08
Radio Vers.: 1.59.42.15
Protocol Vers.: 25.85.30.07H
Windows Mobile 6.1 Professional
SE CE 5.2.19965 (Compiled 19965.1.2.3)
Thanks.
Hi folks.
Firstly, please excuse me if this is not the correct forum for my query.
I recently purchased a used Ford Focus car, and it came with a stereo powered by WinCE 6.0. From what information i could gather, it seems to be a Chinese made car stereo. And i don't know who manufactured it.
Unfortunately, when i select SD card from the touch screen, the screen turns a green colour. If i am lucky, sometimes, the SD card plays my music. However, most of the time the screen is a green colour when i select the SD card. Everything else works fine, Radio, GPS, Bluetooth.
I have used three different SD cards and different music files, still the green screen appears when i select the SD card.
Anyway, I 'restored' the stereo through the settings, but this had no affect whatsoever. Also, i was prompted for a pin number to do a factory reset. The pin number i do not know. And i used a needle to reset through the pin hole.
Does anyone know where i can get firmware and how i can install it please?
Specification:
MCU/DVD/BT Ver: A4-USB131128 / 1014 / JQ_LM_505_2012_09_28_V01
System: Windows CE 6.0
App Ver: 20131205
Boot Ver: 014b0000
Flash size: 128M
OS Ver: A4-CZGB0-130823-01-CE6-V2.2.6
UUID: C7D0600C-DE3A-4113-5438-583042445F30
Any help would be greatly appreciated.
Thanks in advance.
have you tried using a different card? if it still happens, i am afraid you may have to change a new headunit.
as these chinese "OEM"s are of no branding, there is little to no support for any firmware issues.
Bernielee said:
have you tried using a different card? if it still happens, i am afraid you may have to change a new headunit.
as these chinese "OEM"s are of no branding, there is little to no support for any firmware issues.
Click to expand...
Click to collapse
Don't think i can afford a new Stereo at the moment.
Besides, everything else on it - GPS/BT/Radio/Camera works perfectly, it is just the SD not playing music (50% of the time).
Do you know what the Factory pin/password/code may be??
Thanks for your reply though!
Try 3721
Problemm
Hi guys ...
I had a problem with my audio car. i Have a chinese 2 din radio and last week i had a problem in my car battery, and after plug in and plug out the key, the radio appeared the message " interface application error" and the infertace was unformated...
I can acess to the settings to do a factoryu reset.. The system is wince6.0
Is it possible download the firmware and update the system?
if yes, where can i get the download? i allready try to search..
Please help me