I am running with tnt 4.2.4, clemsyn kernel and have repartitioned sd as recommended. Frequently when running quadrant I get a force close when posting the results or when viewing results in the results browser. Has anyone else experienced this?
Hold your tablet in portrait mode when Quadrant runs until it finishes & displays the results screen - it does not FC in portrait, but does in Landscape mode. My guess is that there's a software bug there that causes it to FC when it tries to do a screen rotation just before displaying the results.
Related
I used this tiny App since 5 years now, and just today I bought my x7510, the first thing I did was to install it on my device, but for my amazement, it installed correctly but DID NOT SHOW ON THE SCREEN AS IT DID BEFORE, the settings screen and menus are all messedup badly to the extent that I can't read any information.
the problem is VGA Screen of my device!
plz guys can you report if it working or not on your devices? this little app work wonders for our devices, give it a try please and let me know how to configure it to SHOW correctly on my devices' screen.
P.S.: I don't use any VGA Software like TrueVGA or any sort of these, the device is just Stock. brand new.
I downloaded the latrest version from the site of the developers of this app, but still, NO GO!
Will
please HELP! Please
XCPUScaler ver 3.03 has worked fine on my x7510. I don't have it loaded at this time as I reset the device to make hard SPL a clean install. When I attempt to reinstall I'll report back, however, I am waiting for Manila ver 20 to be released before I re-install all of my apps.
VGA is NO problem
As I reported in another post here, CXPUScalar works fine with VGA in PORTRAIT mode. in landscape mode there are scroll bars to use to access the areas that are offscreen.
On a side note, I uninstalled the app due to repeatable sound problems when running XCPUScalar. I would lose all sounds until I soft-reset the device. I tried with it scaling with overclocking to 663 and without overclocking and only going to 624 and also tried it without scaling and just hard setting at both 663 and 624. Unfortunately everytime I let the software run, both manual start and auto run, it would randomly kill my sound.
I uninstalled only XCPUScalar and have not had the problem resurface.
BTW, the only time I see any slowness is on the today screen drawing the plugins. Everything else works very quickly.
I have been running XCPUScalar since I bought mine. No problems at all upon running it at constant 624. I am using it with Real VGA, no sound problems either. It was the very first application I installed before adding any other apps.
Kasush said:
As I reported in another post here, CXPUScalar works fine with VGA in PORTRAIT mode. in landscape mode there are scroll bars to use to access the areas that are offscreen.
On a side note, I uninstalled the app due to repeatable sound problems when running XCPUScalar. I would lose all sounds until I soft-reset the device. I tried with it scaling with overclocking to 663 and without overclocking and only going to 624 and also tried it without scaling and just hard setting at both 663 and 624. Unfortunately everytime I let the software run, both manual start and auto run, it would randomly kill my sound.
I uninstalled only XCPUScalar and have not had the problem resurface.
BTW, the only time I see any slowness is on the today screen drawing the plugins. Everything else works very quickly.
Click to expand...
Click to collapse
I now fixed the problem by doing one thing:
Hard Reset.... and Cancelled the Customizations that follows a fresh hard reset by resetting the device before the 3 seconds count down.
Now.... it shows properly, but as you mentioned, sometimes I just Lose Sound until another soft reset.
thank you so much for the input..
one more thing:
I just feel the device is slow when going to Programs Menu and scrolling up and down using the stylus, it just takes some lags drawing the screen, I tried playing with cache settings using Schab Adv Config. but all are invain, I JUST DON'T NOTICE ANY IMPROVEMENTS AT ALL.
WHAT DO YOU NEED TO DO IN ORDER TO GIVE IT SMOOTHER MOTION?
VIDEOS PERFORMANCE USING CorePlayer 1.22 sucks too, we have ATI Acceleration chip and yet suffer all these! its just pain in the...
Did someone use it with WM 6.5.3?
a better question yet, did anyone try it on WM 7 yet?
I'm still on 6.1x i like it lean, and never had the time to cook my own custom ROM, one of these days i will.
running it all the time on 624, it works fine on 663, the only problem is it gets too hot after a while if i leave it on 663, probably why the OP has audio problem at higher speeds.
I always switch it back down to 624 when 663 is too hot, but i do up it to 663 when i go online, or watch video, to compensate for the lack of ATI driver support.
when i'm done i lower it back to 624, besides at 663 it sucks up too much battery, i always carry an extra battery with me in case i run out of juice, and not have any USB port nearby to refill.
Hi,
I use coreplayer 1.3.0 and switched ATI support on. When playing a 500 * 400 divx file the benchmark gives 140% playback speed so no problems here. I must say I fiddled a lot with the settings to get it working correctly. No use of CPUXSCALE but I use PocketHackMaster.
grx
I'm curious if anyone has seen a similar relationship: I have read several posts about devices that will randomly stop rotating, and only a reboot will restore the function. I had never experienced this problem until installing and playing Meganoid yesterday. After playing I noticed that the screen will sometimes stop rotating, either getting stuck in landscape, or refusing to switch to landscape. I contacted the developer and was told that they don't mess with the rotation settings so its not their problem. However, I noticed after launching the game that the notification bar switched to landscape even when I am holding the phone in portrait (similar to most games...). I have since uninstalled Meganoid and now have no problems with the rotation sensor (note, I have several other games that play in landscape). Any thoughts or similar experiences?
I've came upon a bug and wanted to see if anyone rise has encountered it. Randomly my phone will not rotate from portrait to landscape. Once chrome actually got stuck on landscape and wouldn't go to portrait. Disabling and enabling rotation seems to fix the issue temporarily. I can't seem to pinpoint what's causing it. Everything is stock still, the phone is rooted and I'm using the Google Now launcher.
Google Now Launcher doesn't let you rotate the screen into Landscape, you'll need Xposed + GEL Settings or Nova Launcher/Apex to allow it to put the phone into landscape mode while on the home screen.
Happened to me all the time in cm11 snapshot m9. Never happened o me otherwise.
I think it's a bug. It happened to me sometimes and it takes a while to rotate.
I disabled the "Turn over to mute" and "Turn over to activate" settings under Settings > Gestures and i would swear my phone is actually performing better than what it was. Can anyone confirm this for me?
It could be a placebo but I notice it. I had already turned off flip to snooze on mine but left flip to mute on. I had lag when changing from Chrome back to the Homescreen prior to turning off the flip to mute setting. After turning it off it did not lag. In an attempt to recreate the issue I cleared the memory and did it again with no apps running in the background as a baseline and had lag with flip to mute on vs off when going from Chrome back to the homescreen. Also tested it when opening and scrolling through the app drawer. I can't wait for 5.1 update, if it comes...
After switching to Apex launcher, and turning off the other two gestures in the Settings, I have had no instances of missed double taps. It was pretty reliable to begin with, but yes, I was noticing some drops. But those are now gone.
I know everyone is complaining of UI lag - which is indeed present. However I decided to do a more real world test. I loaded up WatchESPN, OSMonitor, Play Store,
Gmail, Firefox (with Engadget open), Two camera apps, Hangouts, Play Newsstand, HBO Go, Google Photos, ES File Explorer, N7 Music Player, YouTube and MX Player. After loading all these up one after another, I started Nokia Here Maps - and asked it to locate an address on the other side of town and compute point to point directions to it. It took what seemed like a blink of an eye, and it was back with the route. I then turned WiFi off ( so that it cannot hand over the task to a server in the cloud ) , and asked it to compute another route, and again it was back within a second, with multiple route alternatives. So - to me - this is a more real life use case - I will actually be using the device a lot in this fashion - and for that - it is performing quite well. In general I have noticed that the UI lag does not get worse with the number of apps loaded. So when it come to real heavy lifting, I think the device is doing pretty well .
There is a YouTube video out there today, which is claiming that the Alcatel did better than a Galaxy S6 in running multiple 3D games simultaneously. I will myself never play any games on this device . For my applications - I find the performance satisfactory. Of course, this clearly has all the 5.0 performance issues, which I am hoping will clear up with 5.1 / 5.2 update.
You may want to go under developer options and try things such as disabled the animation scales or lowering them from 1.0 to .5 and possibly enabling gpu decoding of 2d content.....disabling the animation will give the ui response a bit of snappiness.
If you are running nova launcher it has it's own animation settings under "look and feel" and you can choose the "faster than light" option....I disable all the animations...I'm interested in gettings things done..not gimicks and "flash". I'm sure apex has similar settings.
famewolf said:
You may want to go under developer options and try things such as disabled the animation scales or lowering them from 1.0 to .5 and possibly enabling gpu decoding of 2d content.....disabling the animation will give the ui response a bit of snappiness.
Click to expand...
Click to collapse
I already have animations down to 0.5 - I am not touching anything else there. Apex has a setting to speed up some animations as well.
What is a good way to test the browser ? I am using Firefox - with adblock plus.
stl1859 said:
I already have animations down to 0.5 - I am not touching anything else there. Apex has a setting to speed up some animations as well.
What is a good way to test the browser ? I am using Firefox - with adblock plus.
Click to expand...
Click to collapse
When the phone is rooted I'll use adaway....what exactly do you want to "test"? I use lightning+ browser(lightning browser (without the +) is free) which is always nice and snappy.
I've found, that turning of the OS "vibrate" on tap functions seems to have improved performance for me. At the very least it feels better. I feel like i was getting 2 different vibrations when using keyboard, and it would double tap things by accident as a result. You also need to independently turn off vibration on the keyboard if you want it gone completely.
Has anyone noticed that transition animation scale keeps on reverting back to 1x after it has been set to 0.5x ? Does this qualify as a bug ? Or is there something I am missing ?
BTW - even with the third party launcher, I am getting unresponsive double-tap ( wake only ) occasionally, and unset/set the option always brings it back. This is something that Alcatel should be able to fix - clearly a software issue.
stl1859 said:
Has anyone noticed that transition animation scale keeps on reverting back to 1x after it has been set to 0.5x ? Does this qualify as a bug ? Or is there something I am missing ?
BTW - even with the third party launcher, I am getting unresponsive double-tap ( wake only ) occasionally, and unset/set the option always brings it back. This is something that Alcatel should be able to fix - clearly a software issue.
Click to expand...
Click to collapse
Has anyone found a fix for this? Mine does this as well, resetting the transition scale!
Thanks
zapper_master said:
Has anyone found a fix for this? Mine does this as well, resetting the transition scale!
Thanks
Click to expand...
Click to collapse
Never had that problem, I've been using nova prime and double tap to wake works perfectly.
Sent from my 6045I using Tapatalk
Hey all,
After using Q beta for a while without a restart i was getting stuttery animations. It is not lag and is not slowness, just unsmooth animations such as in opening apps, closing apps, switching between them etc..
So due to this and other reasons I went back to stable P. However surprisingly the issue came back on P.
My ram usage is about 2.6 gb, sometimes hitting 2.7 gb, but not more. So i know its not the ram since when i close all apps the issue is still there. Only a restart fixes this.
Does anyone know or have a similar problem as this? as i explained, the phone is fast as hell, but sometimes after days of use i get stuttery animations where i did not have such a thing before using Q beta.