I used this tiny App since 5 years now, and just today I bought my x7510, the first thing I did was to install it on my device, but for my amazement, it installed correctly but DID NOT SHOW ON THE SCREEN AS IT DID BEFORE, the settings screen and menus are all messedup badly to the extent that I can't read any information.
the problem is VGA Screen of my device!
plz guys can you report if it working or not on your devices? this little app work wonders for our devices, give it a try please and let me know how to configure it to SHOW correctly on my devices' screen.
P.S.: I don't use any VGA Software like TrueVGA or any sort of these, the device is just Stock. brand new.
I downloaded the latrest version from the site of the developers of this app, but still, NO GO!
Will
please HELP! Please
XCPUScaler ver 3.03 has worked fine on my x7510. I don't have it loaded at this time as I reset the device to make hard SPL a clean install. When I attempt to reinstall I'll report back, however, I am waiting for Manila ver 20 to be released before I re-install all of my apps.
VGA is NO problem
As I reported in another post here, CXPUScalar works fine with VGA in PORTRAIT mode. in landscape mode there are scroll bars to use to access the areas that are offscreen.
On a side note, I uninstalled the app due to repeatable sound problems when running XCPUScalar. I would lose all sounds until I soft-reset the device. I tried with it scaling with overclocking to 663 and without overclocking and only going to 624 and also tried it without scaling and just hard setting at both 663 and 624. Unfortunately everytime I let the software run, both manual start and auto run, it would randomly kill my sound.
I uninstalled only XCPUScalar and have not had the problem resurface.
BTW, the only time I see any slowness is on the today screen drawing the plugins. Everything else works very quickly.
I have been running XCPUScalar since I bought mine. No problems at all upon running it at constant 624. I am using it with Real VGA, no sound problems either. It was the very first application I installed before adding any other apps.
Kasush said:
As I reported in another post here, CXPUScalar works fine with VGA in PORTRAIT mode. in landscape mode there are scroll bars to use to access the areas that are offscreen.
On a side note, I uninstalled the app due to repeatable sound problems when running XCPUScalar. I would lose all sounds until I soft-reset the device. I tried with it scaling with overclocking to 663 and without overclocking and only going to 624 and also tried it without scaling and just hard setting at both 663 and 624. Unfortunately everytime I let the software run, both manual start and auto run, it would randomly kill my sound.
I uninstalled only XCPUScalar and have not had the problem resurface.
BTW, the only time I see any slowness is on the today screen drawing the plugins. Everything else works very quickly.
Click to expand...
Click to collapse
I now fixed the problem by doing one thing:
Hard Reset.... and Cancelled the Customizations that follows a fresh hard reset by resetting the device before the 3 seconds count down.
Now.... it shows properly, but as you mentioned, sometimes I just Lose Sound until another soft reset.
thank you so much for the input..
one more thing:
I just feel the device is slow when going to Programs Menu and scrolling up and down using the stylus, it just takes some lags drawing the screen, I tried playing with cache settings using Schab Adv Config. but all are invain, I JUST DON'T NOTICE ANY IMPROVEMENTS AT ALL.
WHAT DO YOU NEED TO DO IN ORDER TO GIVE IT SMOOTHER MOTION?
VIDEOS PERFORMANCE USING CorePlayer 1.22 sucks too, we have ATI Acceleration chip and yet suffer all these! its just pain in the...
Did someone use it with WM 6.5.3?
a better question yet, did anyone try it on WM 7 yet?
I'm still on 6.1x i like it lean, and never had the time to cook my own custom ROM, one of these days i will.
running it all the time on 624, it works fine on 663, the only problem is it gets too hot after a while if i leave it on 663, probably why the OP has audio problem at higher speeds.
I always switch it back down to 624 when 663 is too hot, but i do up it to 663 when i go online, or watch video, to compensate for the lack of ATI driver support.
when i'm done i lower it back to 624, besides at 663 it sucks up too much battery, i always carry an extra battery with me in case i run out of juice, and not have any USB port nearby to refill.
Hi,
I use coreplayer 1.3.0 and switched ATI support on. When playing a 500 * 400 divx file the benchmark gives 140% playback speed so no problems here. I must say I fiddled a lot with the settings to get it working correctly. No use of CPUXSCALE but I use PocketHackMaster.
grx
Related
hi guys,
just got my Dopod 838 pro(TyTN)...and I love it. however I notice the screen brightness is not as bright as my o2 atom. even with the brightness turned all the way up in the settings. however I noticed that when I press the camera button the screen brightness increases for a second (to the same as my atom). but the when I close the camera the screen dims back again. seeing this lets me know that the screen does have the capabilities to be turned brighter then is allowed through the settings. does anyone know a reg hack or a trick so that I can turn the screen brightness up? does everyone else notice that the screen brightness goes up when the camera button is pressed? or is this a hardware issue? thanks for the help guys!
I've not tried it on Hermes, but VJLumos II takes advantage of the extra brightness that occurs when the camera is enabled, to make a super brite screen. This works on the Magician, and can be enabled on the Universal but not disabled until soft reset (I've not been motivated to finish writing the Universal's version.)
If the Hermes exhibits this same characteristic, VJLumos II might work on it. Give it a go and let me know.
V
Hi Vijay555 yeah i was actually on your site and ive heard alot about VJLumos II. But I thought it was only compatible with the Magician. Do you think there is any risk of it Hard resteting my 838pro(Hermes)? Anything else i should know before installing it? Does it work 100% correct on the magician? Please let me know!
Thanks!
Works 100% on the Magician, and the active part works on the Universal.
Basically it mimicks the camera and causes it to be activated, causing the extra brightness.
I can't guarantee 100%, but say 99% that it can't hardreset your device (without having the device in front of me I can't say...)
It'll either work or not work, it shouldn't interact with anything else.
I'd be interested to get a Hermes rom dump at some point to see what it's like. It's a great piece of hardware, I'm wondering how to get one now I've jumped ship to the Mio!
V
yeah the hermes is great. Ok well i guess i will be the guinea pig and test it out on my device...haha i hope nothing happens. Ill install it in a few hours and let you know what happens. If i need to remove it will it just uninstall?
By the way is the a reg hack that can do this also?
There's no registry setting I know of that will do this, but there might well be; however, as I said, VJLumos does this by interacting with the hardware in an unexpected way, so it's unlikely to be replicated in the registry.
I think you can run VJLumos in stand alond mode, without installing (which will cause it to be enabled every time you switch on). Just run it in stand alone mode to test it out.
V
Hi all,
I'll also try with Wizard,should I or not?
Any effect on battery life. I mean is it more than max of hardware brightness
vijay555 said:
There's no registry setting I know of that will do this, but there might well be; however, as I said, VJLumos does this by interacting with the hardware in an unexpected way, so it's unlikely to be replicated in the registry.
I think you can run VJLumos in stand alond mode, without installing (which will cause it to be enabled every time you switch on). Just run it in stand alone mode to test it out.
V
Click to expand...
Click to collapse
Hi Vijay, what do you mean run it in stand alone mode?
fordcan: I'm sure that it doesn't work on the Wizard, if it did then I would have written VJCandela for it as well. Not right now, and not until I get a wizard in my hands (all you new Hermes guys, if you find yourself with a spare Wizard, I can give it a good home!)
phame: if you just double click on the VJLumosII icon, it'll enable superbrite once. If you click on the -install icon it will try to enable it every run.
Like I said, it's not written fully for WM5 yet, because I never used my Universal as my main phone, and frankly the screen was bright enough. The magician benefited from it, but hopefully any HTC phone that exhibits the curious camera loading/screen brighter thing might benefit from it.
However, for now, as I said, it's not fully debugged for WM5. But test it, and if it works, I'll try to make some time to fix it. The problem is that it will only work the first time, not every time you run it. Hopefully easily fixable.. But it won't do any damage.
I presume it will drain the battery faster, since screen is brighter, but if you use it in bursts or recharge daily, it shouldn't be an issue. I never used my Magician without it, and it was fine after 1 year.
V
vijay555 said:
fordcan: I'm sure that it doesn't work on the Wizard, if it did then I would have written VJCandela for it as well. Not right now, and not until I get a wizard in my hands (all you new Hermes guys, if you find yourself with a spare Wizard, I can give it a good home!)
Like I said, it's not written fully for WM5 yet, because I never used my Universal as my main phone, and frankly the screen was bright enough. The magician benefited from it, but hopefully any HTC phone that exhibits the curious camera loading/screen brighter thing might benefit from it.
V
Click to expand...
Click to collapse
thanx for the reply,
I a bit confused; you are telling "doesn't work on Wizard" and at the same time "any HTC phone that exhibits the curious camera loading/screen brighter thing might benefit from it " Wizard got this..
curiosity kill the cat :wink: Better try and see issue :idea:
fordcan:
Sorry, it might benefit from the technique, not necessarily this version.
Like VJCandela, I have to have a Wizard in my hands to experiment with the camera driver. It'll be easy to write once I've got the device in my hands, but I can't test it.
It shouldn't do any harm, since it'll probably just not be able to find the correct camera driver on the Wizard. But give it a go and tell me if it does anything.
I never knew that the Wizard has this screen brightening effect
V
Absolutely not working.. tells; "Can't load Superbrite Libraries!"
Anyway "Trying times are no time to quit trying"
Ok i downloaded the cab file, copied it to my memory card and executed the file. And it worked perfectly instantly the screen brightness went up. And it didnt seem to be causing any type of slow down or problems.
When i click the camera button i just get an error message which sais "the camera app is already in use". But luckliy no soft reset.
However i couldnt find how to turn it off. It doesnt show up in the list of "running programs"
so far the way i launched it was by just clicking in the icon. Can you please tell me how to do the "-install" thing you were talking about?
and how do i shut it off if i want to use th camera? At the moment i can only do a soft reset for it to turn off.
Thanks!
You should have a bunch of shorcuts installed in yor startmenu.
Launching VJLumosII with parameters -off will disable it, clicking -install will install it so it's run every time it's switched on.
However, I've not tested the -install option on WM5 so let me know if it works appopriately. I'll get around to reweriting it eventually.
V
i tried clicking the short cut to shut it off. But i get an error message saying something about the application being corrupt. So to diable it i still have to soft reset. Im scared to install the app in fears that the remove shortcut may not work
Also ive noticed the battery drains about 30% faster with the app running.
any ideas?
As I've said, it only half works on anything other then the Magician. I'll fix it sometime as a priority - I just got a Hermes, and have to say that the screen is a bit "meh", not as bright as a Mio 701 or Magician. Washed out colours and poorer viewing angle. Superbrite is necessary, not optional
V
I've just switched from a Prophet to Magician. Couldn't stand the slowness of WM5, especially with some big database software I use. The only thing I miss is the Prophet's screen brightness (OK, battery life was great too) so I was really pleased to find vjlumosII. The only downside I've run into is that it adds about 3 seconds to the power up time when I press the power button on my Jam. I've not seen this mentioned elsewhere. Is this a normal effect of the software?
Do you see the slowness on the Magician or the Prophet?
On my Magician I never noticed it.
I just wrote a new kinda app yesterday for low level hacking, and will see if I can apply this to VJLumos. Hopefully some new ish updates coming soon - however, I am using my time well I hope. I'm writing a new website, hence the slow progress on programming.
V
For the Hermes, see here:
http://forum.xda-developers.com/showthread.php?t=279365
V
vjay
Vijay,
I've only used vjlumosII on the Magician. The Prophet is the first PDA/phone with a screen that was as bright as I'd want, so I never tried vjlumosII on it.
The delay on my JAM (the 128MB RAM version) is not subtle. It takes a full 3 sec for the phone to come on after you press the power button. The same thing happens if you push any other button to turn on the phone. There doesn't seem to be any delay in the phone coming on if it is awakened by recieving an incoming call. When I turn off vjlumosII the power up delay disappears.
Also the screen brightness initially doesn't come on at maximum. It takes another 2 seconds to boost up.
Thanks.
vijay555 said:
Do you see the slowness on the Magician or the Prophet?
On my Magician I never noticed it.
I just wrote a new kinda app yesterday for low level hacking, and will see if I can apply this to VJLumos. Hopefully some new ish updates coming soon - however, I am using my time well I hope. I'm writing a new website, hence the slow progress on programming.
V
Click to expand...
Click to collapse
Hi Guys,
I now own a HTC TP/Raphael for two weeks and am extraordinarely happy with it! I waited about 1.5 years to finally find a machine that mets all my needs and wishes.
I want to thanks all you guys, because I read this forum months before I finally bought the thing and was very pleased with all the info, pro and con, you all posted!
I bought mine in Holland with Tomtom v7 bundled.
Common problems I faced and how I solved them:
1) Problem: Slow GPS Fix (10 min). Solution: Found Quick GPS pre installed on my device, ran it and have a fix now within a cool minute.
2) Problem: HTC picks up or cancels incoming call in trousers pocket. Solution: Installed AnswerDisabler 0.5.1 Thanks to the programmer! It works a treat!
So now I can clear my jacket pockets of the weight of a huge HP iPAQ 4700HX and my compact camera Canon IXUS 850. (The latter I still take with me on occasion, but for the odd picture opportunity, the HTC suffices.)
I'm wowing my friends on a regular basis with this device, showing of the nice TF3D interface and G sensor app's.
Okay, I might still have a small inconvenience left, but I will post that in a separate thread.
Thanks again and keep up all the good work!
Emiel Ratelband?
I too am a happy customer with my Touch Pro.
I faced a few slightly different inconveniences:
1. The Web Browser tab in the TouchFlo does not display the graphics. This is the screen where the YouTube icon. I've update the graphics with GIF files of a few of my more common websites and reduced the size of the images. Works after a power down but not after a reset.
2. Battery performance is still not as good as I was hoping but definitely better then my Dopod C730. I've already done the performance tweaks and this has indeed improved the battery performance. I use the device with push mail for my office email. I also enable 3G and disable Bluetooth.
3. Screen brightness under direct sunlight is bad. Can't do much about that one.
4. The TouchFlo sometimes "hang" with a black screen or frozen home screen. Haven't figured out why yet.
Other than that, I love my new toy.
I am another happy customer and the issue of the battery I dont have actually... I am in Hong Kong and bot the TP at the sole authorized retailer and not a parallel import so therefore my TP is branded which is a pain in the butt. I don’t want to flash the ROM as I’m a newbi at WM stuff so if I screw anything up, I’m dead. Also I don’t know how to get into the registry even if I install Total Commander and stuff… but back to your question….
My beef:
1) I don’t use the TP 3D and I use the standard WM screen. However, ONLY the browser Opera has the auto rotate function unless I slide out the key pad…. How annoying is that? I have found a forced rotate application which is SPB Phone Suite but I don’t want to use this as out of this entire program I only want is the force rotation function… so I’m still searching if there is a app to just force rotate the screen.
3. You can actually, if it is on auto adjust brightness. Turn it off because it toggles between 30-70% which means that you have 30% more brightness if you adjust it yourself with the slider.
@sgsdebruin: No, no Emil Ratelband. (Dutch happy-guru a few years back). Just thought it would be polite to let all the people, who spent time to do this stuff for the community, know that it's appreciated. I know it works for me if others are being appreciative so...
@kelvgoh:
1) No problem for me.
2) Battery performance could be better, yes, but I'll have it on the usb a lot anyway for synchronizing with Outlook at work, so it's not so big of a deal. I'm also thinking that battery life of a device is inversely proportional to the screen resolution.
3) Screen readibility in sunlight. Yeah, that's not so good. The screen of the device is not anti-reflective at all, what makes it really sparkle if you haven't reflections in it, but if you do, then it's bad. (See also some of the Youtube video's of the HTC. In many occasions you can clearly see the camera it's filmed with.)
4) I lucked out there too. No problem.
Fact remains that some HTC TP do have weird problems (1 and 4) and others don't. You can read more of those freak problems on the forum. It looks like the production process is not making consistent devices every time.
Mr.Sir said:
3. You can actually, if it is on auto adjust brightness. Turn it off because it toggles between 30-70% which means that you have 30% more brightness if you adjust it yourself with the slider.
Click to expand...
Click to collapse
Thanks for the tip. Unfortunately, that also increases the battery usage. Sigh, can't have everything.
hvwtp said:
@sgsdebruin: No, no Emil Ratelband. (Dutch happy-guru a few years back). Just thought it would be polite to let all the people, who spent time to do this stuff for the community, know that it's appreciated. I know it works for me if others are being appreciative so...
@kelvgoh:
1) No problem for me.
2) Battery performance could be better, yes, but I'll have it on the usb a lot anyway for synchronizing with Outlook at work, so it's not so big of a deal. I'm also thinking that battery life of a device is inversely proportional to the screen resolution.
3) Screen readibility in sunlight. Yeah, that's not so good. The screen of the device is not anti-reflective at all, what makes it really sparkle if you haven't reflections in it, but if you do, then it's bad. (See also some of the Youtube video's of the HTC. In many occasions you can clearly see the camera it's filmed with.)
4) I lucked out there too. No problem.
Fact remains that some HTC TP do have weird problems (1 and 4) and others don't. You can read more of those freak problems on the forum. It looks like the production process is not making consistent devices every time.
Click to expand...
Click to collapse
Must try and tweak the device more. Thanks for sharing.
Hi,
I have a very strange problem... I have a german MDA Vario IV (Raphael) and I recently flashed ROMEOS 1.12, then HTC StockROM and after a couple of days it first happened, that my camera viewfinder is completely black. The camera, however, works, i.e. it takes pictures which I can view in the album.
When I tap the screen in camera mode, I see the 3 symbols, but when I tap the preferences-wheel, nothing happens.
When Romeos 1.40 (German) came out, I flashed it - and I still have the problem. I don't quite understand it, as it worked first with the HTC Rom and after about 14days it stopped working.
Do you have any help?
I just had the same problem. Fixed by doing a hard reset...
did you flash a new radio?
I just registered to report this same issue.
I just picked up my fuze today, and was going through the steps in the noob guide before I decided to stop and just let the phone install the regular software so I could at least activate it before a new bill kicked in before the account got cancelled.
Right before I stopped going through the noob guide, I got as far as doing a soft reset right before the installing ATT bloatware and was removing some options in the guide and restarting. Then, since I just wanted to activate the phone (I had no SD card to safely try out all the steps in the noob guide, and wanted to wait for it), I did a hard reset.
After I activated my phone, I've been trying out my camera and it just shows a black screen. If I touch the screen the three buttons show up and clicking on the buttons don't do anything. Though, if I hold the enter key it clicks and takes a picture which shows up in my album.
I'm going to wait till my SD card comes in before I do another hard reset to do the install again. Hopefully the hard reset fixes the issue.
Still no one else with this issue? I have flashed NATF 4.5 as well as energy 2.0 . I have changed to two different radios and this problem has persisted. Everything works fine at first, but then within a couple of days it goes black. Everything is exactly as others have reported. Pictures take, the touch screen menus work ( selecting any setting ).... its just the viewfinder that is acting goofy. Soft resetting it will occasionally make it work again. It makes me feel as though some of us have some software somewhere that isnt acting as it should. I googled the issue to no avail.
Any gurus able to shed some light on this matter?
Currently running:
HardSpl 1.9
EnergyRom 2.0
Radio 1.02.25.32
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
KSS said:
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
Click to expand...
Click to collapse
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
pyraxiate said:
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
Click to expand...
Click to collapse
Of the programs you listed, Skyfire is the only one I am also running. I just completed my flash and turned the camera on prior to installing any apps, cabs, etc... and the viewfinder worked fine.
I am in the process of adding my customizations back on, doing a PIM restore, and installing cabs and will edit my post later to report whether it continues to function correctly.
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
KSS said:
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
Click to expand...
Click to collapse
This was an issue with RRE's roms a while back. Not sure what he did to fix it but I know he tweaked a flashed new versions about 100 times in one day! I would post the question in your respective rom's threads and see if the cooks have a better idea. I would bet that there is a file or setting common to all of the roms listed here that is causing the problem.
Im running the stock rom in a 1 1/2 month old Fuze
The Black screen happens to me, if too much sunlight gets thru on superfine settings. (i hold it facing directly into the sun) It seems to blow out the picture (goes all white) -then theres no display at all (black) unless i exit camera and restart.
Camera viewfinder is black
Hi,
there is a fix for this on the htc asia site, if you go to the support tab and look at the downloads for touchpro, I am not sure its for all phone as it asked for my serial number and told me it was not for my phone, on this site at least it seemed to be for hong kong, singapore & china, Perhaps check the htc site for your location.
Good Luck
A|C
Hello there, Quick question.
I recently upgraded TomTom Navigator 7 on my SE XPERIA X1 from version 7.450.9028 to version 7.910.9185 mainly for the fixes for a WVGA screen e.g. larger buttons and text.
However, I have found that the phone always seems to freeze when using TTN7. I never found this with the previous version however, the improvements are too improved to revert back to the old version.
Is this problem caused by the application or the phone as the screen becomes unresponsive when freezing (e.g. it doesn't vibrate on tap) giving the idea that the phone's memory is full when running the application and causing the phone to slow down.
Cheers,
Hyped
I have been experiencing the same issue on my Xperia X1 that you've had Hyped. I am actually running version 7.915.9196. Basically, TomTom will be fine UNTIL it gets a GPS fix. Once that has happened, it is only a matter of 1-2 mins before the whole phone locks up, requiring a battery cover removal + reset button fix.
I also don't want to revert to the previous version, but I'm thinking it may have to come to this I have the ATI D3D driver installed from the Diamond, and I'm planning on removing it to test, but I don't think TomTom calls D3D at all (in fact, im 99% sure), so I doubt this will fix the issue.
Looking for more insight from anyone else, or if there's a newer version of TT7 that we're missing out on.
Mine is touch and go, When it hasn't got a GPS fix, it'll freeze at random moments e.g. when the keyboard is up.
I tried it yesterday in the car and experienced the same problem as you, as soon as it got a GPS fix it froze up and required a soft reset.
Not sure if I'm the only one but I always face audio latency issues while gaming with my Bose AE2 SoundLink. Unfortunately I don't have other Bluetooth devices to test it but it works with all my wired headsets.
Only via gaming I face 1-2s latency. I searched the Internet and found solutions like locking the refresh rate but this doesn't work. It's the same for all games, I already tried repairing the headset, tried all modes (x mode) and different settings but it's always the same for every game. As soon as I switch from a normal app to a game the audio lags - everything else (calls, YouTube, etc etc) works fine.
Has someone else the same issue and got it fixed?
Asus 5 ultimate,
Latest firmware as of now (.86)
Rooted
I haven't tried connecting to my speakers, but i'll give it a try and see if I get similar results.
In the meantime, are all of your games running on a profile? What are your settings? I'll go through with all the same stuff.
Things are a little behind on my end. Note 20 Ultra screen decided to start peeling off, so i've been trying to move over everything for a trade-in before it ends up cracked.
It's normal for latency to be higher when gaming, though 1-2 seconds is definitely way too much. It's usually a difference of 0.5 seconds at most
Sorry for my late reply - I was really busy the last weeks.
I had the chance to try it with different devices and it's the same for all of them. I notice it a bit more for some games and a bit less for others. For example Grimvalor has a huge delay that can be noticed really easily because it makes a sound when you slash your sword -> sound starts after the animation is done.
https://play.google.com/store/apps/details?id=com.direlight.grimvalor
I doubt this is a hardware issue since everything works when I don't play games but other media. However I have no idea what the technical differences between games and videos are in the Android world.
Things I tried so far (unsuccessfully) :
factory reset
remove the game from Armory Crate
change refresh rate as well as other settings
try different games
Everything works with a wired Headset or with my old phone.
Not sure if the support can do something but I'm surprised that I'm the only one with this issue.
twistedumbrella said:
In the meantime, are all of your games running on a profile? What are your settings? I'll go through with all the same stuff.
Click to expand...
Click to collapse
I've tried it with and without a profile - that doesn't make any difference.
What settings do you require exactly, I could export a game profile if that helps?
I completely forgot about testing. If none of the settings seem to have any impact, i'll try the defaults. If I can't get the same results, then ill see about trying to find any that cause it.
...oh, it's definitely off. I connected a Wonderboom and launched Nier and pressing the buttons had just enough delay to notice it was out of sync.
Thank you - so I guess it's not just mine.
Not sure if contacting the support will solve the issue. I wonder if all others don't have this issue, don't care about it or better Bluetooth devices.
@reica since you don't seem to face this: could you tell me what device you have or did you change Bluetooth related settings?