Dear Friends,
I need your kind help to get back my orbit 2,
I have flashed android built on nand and flashed update too, but it has stop working touch screen. so i tried to get back my windows rom back. but now i have lost windows default bootloader. i have tried all the buttons too with soft reset. but i am failed to get back. i have tried t remove battery then reset , also not working this trick.
now i have locked screen of android built with non working touch screen.
please help me...
Are you tried to enter the three-color screen?
yes, i have tried all the probable way to enter in to boot loader mode. but after boot screen it starts booting android from sd card.
pinkesh82 said:
yes, i have tried all the probable way to enter in to boot loader mode. but after boot screen it starts booting android from sd card.
Click to expand...
Click to collapse
Try to hold down the camera button ,then connected your phone to the computer.
I have tried the same trick, but its not working....
pinkesh82 said:
I have tried the same trick, but its not working....
Click to expand...
Click to collapse
its so strange... I have never met this problem.
is there any hope to recover it?
Hi. Same problem for me wit Polaris Pola 100. Any solution?
Please...
Hi, try this:
gushpitz said:
Hi. Same problem for me wit Polaris Pola 100. Any solution?
Please...
Click to expand...
Click to collapse
Hi, try this:
1- Format a SD card in FAT32;
2- Copy for the SD card original rom (rename for POLAimg.nbh);
3- With phone off, press power button and camera, but without connected with PC, because he go to SD card.
Sorry my bad english
Hi i am having the same problem on my Orbit II, have Android flashed, thankfully screen works just too buggy. so i would like to flash windows but am unable to access bootloader.
Anyone know of a fix?
thanks.
Related
Hi all
I have flashed my vox with a bas rom home cooked all looked good flashed fine. now i get stuck at initial splash after phone vibrates tried to flash good rom, tried mtty and putting image on sd called voximg.nbh "in folder"
Is there any way to recover my Vox
gibsonk said:
Hi all
I have flashed my vox with a bas rom home cooked all looked good flashed fine. now i get stuck at initial splash after phone vibrates tried to flash good rom, tried mtty and putting image on sd called voximg.nbh "in folder"
Is there any way to recover my Vox
Click to expand...
Click to collapse
If you ever made a bkondisk image backup there probably is a way to recover your phone. The important part is part 6 (4MB)
No bkondisk backup
Hi thanks for your reply but i dont have this backup, i do have a dump and backup of the original rom, cant gat into boot loader can nit be recovered like hermes with folder on sd with rom and power on holding a sequence of keys
Can you get into bootloader mode? yes or no
Did you flash my USPL? yes or no
There is a chance to recover if both answers are yes
PS: and have you done a hard reset? and always take both the SIM and SD card out before booting and also take the battery out for twenty seconds
I have flashed your spl, but i have never been able to get my phone into bootloader unless done by the update. Is it possible to use a bkondisk backup from another phone ??? hard reset does not work phone does not get that far. will try with battery out
gibsonk said:
I have flashed your spl, but i have never been able to get my phone into bootloader unless done by the update.
Click to expand...
Click to collapse
Unplug usb, pull battery out, put it in, keep camera button pressed and shortly press power. You should see the tri-color bootscreen.
I managed to get into bootloader following your instructions and flashed it with a good rom and my Vox is working fine. Thankyou for your help and time Jocky Much appreciated. Guess i need to take some more time when cooking and look more at the info from the cooked rom.
Thankyou
Thankyou
I am having the same problem!! except the only thing is i cant flash an original signed HTC rom because i changed the CID in my cooked rom (STUPID!!)
I flashed my cooked rom using Jockyw's USPL. I can connect to the bootloader using MTTY. When i try to flash another custom ROM with a CID the same it says corrupt (this is the check for the signed ROM??).
Please help!
Thanks
VOX.
Hello,
could you please attach the instructions to this post?
My VOX is bricked! Please, help.
jockyw2001 said:
Can you get into bootloader mode? yes or no
Did you flash my USPL? yes or no
There is a chance to recover if both answers are yes
PS: and have you done a hard reset? and always take both the SIM and SD card out before booting and also take the battery out for twenty seconds
Click to expand...
Click to collapse
I have the same problem, but can`t get the bootloader screen,just a black balnk screen and the phone beeps.any ideas?
fixed
have fixed my phone
Hi, I tried to install WM 6.1
but i think i installed wrong version to for universal and its now compeletly dead even i can not access the boot loader
any one can help me please
aahmed12 said:
Hi, I tried to install WM 6.1
but i think i installed wrong version to for universal and its now compeletly dead even i can not access the boot loader
any one can help me please
Click to expand...
Click to collapse
remove tha battery, wait two mins and re-insert the battery, power on the device and try to enter bootloader. If you can now access the bootloader, format the DOC with MTTY (instructions are in the Wiki) If you still cannot access bootloader mode, do you have any leds lit?
Cheers,
Beasty
yes I have red lit form time to time when i connect it to the usb
but nothing at all
to enter the boot loader while ur device is off u press backlight+power withiout the restart botton .. i dunno if u already know that
Hey, I've met the same problem as yours. After I used MTTY to clear DOC, my D900 was totally down, even I could not access the BL (I've tried more 20 times). Then I changed the battery to another one, and press Power+Light+Reset, 2 minutes later the BL screen appeared! I flashed the ROM again, my D900 is working well now~
My universal was upgraded from tomal (ranju) 7.7 rom to the 8.2 and now im stuck on the boot screen and cannot go to bootloader mode because my power button is broken, so now what? im assuming im screw'd. right?.. anyone?
Also, what is kitl mode? can that help me?
Doh, got it all wrong. Try http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader but I had success just getting the PC recognizing the device and re-flashing the ROM. The bootloader screen appeared at some point during the flash.
Thanks for the reply. The problem is that i cannot connect to activesync because my universal is stuck on the screen where it shows you the rom and radio. I can use my memory stick to load any files via my sd card port on my laptop but i cannot connect my uni to activesync since its stuck on the splash screen. If i need a specific file to boot my uni straight to bootloader boot when the phone boots up via the sd card i can do that. Any suggestions?
-UPDATE- Oh wow once i got back to the reply i saw your correction...lolz. ill try that.. thanks X-D
Ok, try hard resetting or a soft reset first. Well, you probably already tried, but nevertheless... DON'T PANIC!
How broken is your power button?
oh its broken...off the motherboard need to be soldered broken.lolz.. i tried the method you said and it doesnt work =-(.. Is there any file for windows mobile that you can put on the external memory card such as the sd for the uni so that it can force the phone to bootloader as soon as the phone boots?
-Edit: it seems like the only way i can fix this problem is if someone backs up their rom to their memory stick and sends it to me some sort of way so that i can put it on my memory stick and do tomals sd upgrade and hope that it re-updates it.. =-(
jxs714 said:
oh its broken...off the motherboard need to be soldered broken.lolz.. i tried the method you said and it doesnt work =-(.. Is there any file for windows mobile that you can put on the external memory card such as the sd for the uni so that it can force the phone to bootloader as soon as the phone boots?
-Edit: it seems like the only way i can fix this problem is if someone backs up their rom to their memory stick and sends it to me some sort of way so that i can put it on my memory stick and do tomals sd upgrade and hope that it re-updates it.. =-(
Click to expand...
Click to collapse
The only file you can use is called Enter Bootloader, it comes with a standard ROM upgrade folder, I recommended it at first, but then realized you won't be able to access it from your Uni, seeing you are stuck. There is a ROM upgrade from SD thread somewhere, it can be done, but not if you are stuck, it's for the broken USB ports.
mtty?
Mtty no good because it doesnt pick up the phone via usb
Have you tried the below method on wiki
Method 2
Steps
download the tool
disconnect USB cable from your device
disable USB connection in ActiveSync
reconnect USB cable
wait some 30 seconds
run the tool
If successful, device will boot itself.
Hi
I'm facing a problem with my Nexus S, before it was working... but, unfourtunatlly i just make some modification in the system file and now my phone not working and stuck at the google logo black screen... exactly, i think the problem in the java runtime.jar file that was in the system folder, i replace it with another file and all that done since i want to add another language to the system so that it can understand it. but, the device now is not working....
I tried to enter the recovery mode and wipe all data, but nothing change. its keep the same. so i tried also to format the system (from the recovery) since, the modification done in that folder... also, its not working....
So, I think the best way right now is to return it to the default rom(official one from google) , i download it, and tried to flash it using the "fastboot" command but it keep give me error when writing for system.img file....
What can I do right know ??? I can't use my device at all...
Help me Guys, please.....
For future reference Factory wipe doesn't touch /system...just /data.
If you formatted your /system, and it actually formatted, all you can do now is restore a working system.
If you didn't make your own nandroid backup of the system (and you ALWAYS should in the future before messing with system level modifications) to have a known working configuration, then your best bet in my opinion is to go to this thread: http://forum.xda-developers.com/showthread.php?t=884093
Download the nandroid image from there and flash it to your phone using Clockwork Recovery.
Good luck.
distortedloop said:
For future reference Factory wipe doesn't touch /system...just /data.
If you formatted your /system, and it actually formatted, all you can do now is restore a working system.
If you didn't make your own nandroid backup of the system (and you ALWAYS should in the future before messing with system level modifications) to have a known working configuration, then your best bet in my opinion is to go to this thread: http://forum.xda-developers.com/showthread.php?t=884093
Download the nandroid image from there and flash it to your phone using Clockwork Recovery.
Good luck.
Click to expand...
Click to collapse
But, The question here is.... how can i flash it when i can't get access to the memory(since the Nexus S doesn't have sd memory slot) and to the system ??
when i enter the recovery, all i can do is use the fastboot command.... can i use it here ??
Thanks alot .....
If you boot into Clockwork, you should be able to use it's mounts menu to mount the sdcard...then use adb to push the files to your sdcard. adb should be active and working in clockwork.
If that doesn't work out for you, you could also try the Odin and "download mode" approach from this thread: http://forum.xda-developers.com/showthread.php?t=947950
distortedloop said:
If you boot into Clockwork, you should be able to use it's mounts menu to mount the sdcard...then use adb to push the files to your sdcard. adb should be active and working in clockwork.
If that doesn't work out for you, you could also try the Odin and "download mode" approach from this thread: http://forum.xda-developers.com/showthread.php?t=947950
Click to expand...
Click to collapse
Thank you sooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo much distortedloop....
as what u said.... the mount already available in the clockwork.. but i didn't see it before.....
Now i got my Nexus S back to me again.....
Thank u soooooooooooooo much Man... I appreciate it
abd640 said:
Thank you sooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo much distortedloop....
as what u said.... the mount already available in the clockwork.. but i didn't see it before.....
Now i got my Nexus S back to me again.....
Thank u soooooooooooooo much Man... I appreciate it
Click to expand...
Click to collapse
Glad you're up and running again.
Hello guys
I have the same problem, but i guess for different reasons.
I applyed the superboot from the modaco´s forum on my nexus s, but I guess I did it with the wrong version (i had got the 2.3.4 ota before doing so and used a 2.3.3 version) and now my phone won´t boot. My rom was stock. Now, it remains on that google initial screen. I can´t get to upload anything for the device since I guess the usb debug mode is off, although when I connect the device to the computer, the system shows the usb driver. I guess my device is GT90 something, can´t say for sure. Have to check at the box.
That said, I´d like some help on what to do about it.
I´ll be forever grateful!
ectole said:
Hello guys
I have the same problem, but i guess for different reasons.
I applyed the superboot from the modaco´s forum on my nexus s, but I guess I did it with the wrong version (i had got the 2.3.4 ota before doing so and used a 2.3.3 version) and now my phone won´t boot. My rom was stock. Now, it remains on that google initial screen. I can´t get to upload anything for the device since I guess the usb debug mode is off, although when I connect the device to the computer, the system shows the usb driver. I guess my device is GT90 something, can´t say for sure. Have to check at the box.
That said, I´d like some help on what to do about it.
I´ll be forever grateful!
Click to expand...
Click to collapse
try to boot into bootloader. root the phone n install a recovery.img, then reinstall a custom rom or the stock rom.
deeren said:
try to boot into bootloader. root the phone n install a recovery.img, then reinstall a custom rom or the stock rom.
Click to expand...
Click to collapse
The thing is that i already have clockworkmode installed and i can access it through bootload, in fact is the only thing i can do. My problem is that i just can´t send the recovery.img from the pc to the phone. And I also think that the usb debug mode is unavailabe, so I can´t activate it.
I´m new to this thing so the only way I could move files into the phone was through windows explorer drag and drop. Honestly I´m lost without it.
Is there a different way to push it to the phone ?
I understand this forum is intended to more experienced users, and for that I apologise.
Guys I found a solution by enabling USB from clockwork! Thanks! Keep the good work!
Sent from my Nexus S using XDA Premium App
Hello "ectole", could you let me know how you get out of it. I am in the same problem. I followed this guide http://forum.xda-developers.com/showthread.php?p=13800735#post13800735 to root my phone, now I always boot into clockwork. I can I boot into Nexux again?
Hi guys,
I'm in a similar situation. I tried to install CyanogenMod 7 to my Nexus S (ATT), got stuck at the skating dude.
Booted back into Clockwork, and tried to flash back to the stock firmware, but I think I accidentally flashed the wrong one (for the 9020T instead of 9020A) build. Now I can't get into ClockworkMod or anything on the screen whatsoever.
Does anyone have any tips at all? I'm really screwed here, would appreciate it a lot...
J
Hey bante just go to clockwork then to mount/dismount menu and the last option should be mount USB storage. Mount it and stay there and your PC should see the sd card. Then upload what you want.
Sent from my Nexus S using XDA Premium App
HELP!!! Odin bricked my Nexus S i9020a
I attempted to use odin to restore my phone. Could not get past bootloading screen. Put phone in recovery mode and used odin and grh78 firmware.
Odin went thru the whole process and said success, then my phone shut off, and will not power back on. Any ideas?
OkNewMedia said:
I attempted to use odin to restore my phone. Could not get past bootloading screen. Put phone in recovery mode and used odin and grh78 firmware.
Odin went thru the whole process and said success, then my phone shut off, and will not power back on. Any ideas?
Click to expand...
Click to collapse
Which phone version you got?
Sent from my Nexus S using XDA App
OkNewMedia said:
I attempted to use odin to restore my phone. Could not get past bootloading screen. Put phone in recovery mode and used odin and grh78 firmware.
Odin went thru the whole process and said success, then my phone shut off, and will not power back on. Any ideas?
Click to expand...
Click to collapse
By 'recovery mode', do you mean download mode? (you hold both vol up and vol down then plug in USB)
My Nexus s not boot at all
Hi
I'm facing a problem with my Nexus S, before it was working... but, unfourtunatlly i just make some modification in the system file and now my phone not working and stuck at the google logo black screen...
it doesn't entering the recovery mode. it only stucks at the google black logo screen
What can I do right know ??? I can't use my device at all...
Help me Guys, please.....
shavinder said:
Hi
I'm facing a problem with my Nexus S, before it was working... but, unfourtunatlly i just make some modification in the system file and now my phone not working and stuck at the google logo black screen...
it doesn't entering the recovery mode. it only stucks at the google black logo screen
What can I do right know ??? I can't use my device at all...
Help me Guys, please.....
Click to expand...
Click to collapse
flash either clockwork or twrp recovery via fastboot.
but how can i do this thing
jstennis1591 said:
Hi guys,
I'm in a similar situation. I tried to install CyanogenMod 7 to my Nexus S (ATT), got stuck at the skating dude.
Booted back into Clockwork, and tried to flash back to the stock firmware, but I think I accidentally flashed the wrong one (for the 9020T instead of 9020A) build. Now I can't get into ClockworkMod or anything on the screen whatsoever.
Does anyone have any tips at all? I'm really screwed here, would appreciate it a lot...
J
Click to expand...
Click to collapse
Sounds like you flashed i9023 software. You could try Odin. Does your computer recognize the phone?
Sent from my Nexus S 4G using xda premium
Hi, I recently updated MangoB2, and it was working fine, but I tried to play a video and it froze and went off, and came to connect to PC screen, and when I try to restore, it shuts the phone off and it restarts the phone. Plus, it also can't recover using windows phone support tool, please help!!!
CoffeeM said:
Hi, I recently updated MangoB2, and it was working fine, but I tried to play a video and it froze and went off, and came to connect to PC screen, and when I try to restore, it shuts the phone off and it restarts the phone. Plus, it also can't recover using windows phone support tool, please help!!!
Click to expand...
Click to collapse
My first question is, is there any ROM's available for your device. If so, boat into the tri-color screen & try flashing a ROM. Also, have you tried Hard resetting your device.
Yes I did try to hard reset, but it does it quickly, and says to restart my phone, and my phone is HTC T8788, also when i try to restore in Zune it stops at 16%,
CoffeeM said:
Yes I did try to hard reset, but it does it quickly, and says to restart my phone, and my phone is HTC T8788, also when i try to restore in Zune it stops at 16%,
Click to expand...
Click to collapse
Did you try booting into the Tri-Color Screen & flashing one of the ROM's from here?
Hold Volume down & press power, keep holding volume down until you see the tri-color screen (red/blue/green/white), when connected to PC it'll say USB at the bottom & windows should install a new driver. Than you run the flashing program from one of those threads.
I can't do it, it doesn't work, now it freezes on HTC white screen, and doesn't connect to restore either,
Nobody is going to help you if you aren't trying suggestions.... It should most definatly go into bootloader... It won't even have a chance to freeze nothing loads at that point.
Sent from my HD7 using XDA Windows Phone 7 App
I did try to flash, but this only works, RUU_Mondrian_Cingular_US_1.03.502.07_5.51.09.06_22.30.50_RELEASE other ones I get [error] 208, but still it get stuck at HTC screen, is it because I have to have nk.nbf file, if so can anyone tell me where and how I can get it working, I tried all night and still trying to fix, I really need it working!
The phone still gets stuck at HTC screen, even after flash, I tried everything, could it be because I have Windows Phone 7.5 Beta 2 in there.
CoffeeM said:
The phone still gets stuck at HTC screen, even after flash, I tried everything, could it be because I have Windows Phone 7.5 Beta 2 in there.
Click to expand...
Click to collapse
If it's still getting stuck, maybe you have a faulty SD Card or the ROM chip got corrupted somehow. You may have to send it in under warranty. My only other suggestion would be to try RSPL or HSPL (HSPL void warranty) & than try flashing a ROM again if RSPL/HSPL supports your model of the HTC Surround. I'd suggest RSPL as it's temporary & won't cause any warranty issues.
Instructions:
1) Boot into Tri-Color Screen with Volume down feature.
2) Connect to USB to PC.
3) Wait for Windows to install new hardware driver. (Should be done already as you tried flashing already)
4) Run DFT_RSPL_WP7FG1_LAUNCH.exe from ZIP attachment in thread linked below.
5) Wait for your device to reboot back into Tri-Color Screen on it own.
6) Flash ROM. Optionally, flash HSPL with DFT_HSPL_WP7FG1_INSTALL.exe from same zip, than flash the ROM.
NOTE: Using HSPL flashes it to ROM & if you are having hardware issue, this could completely brick the device. So, proceed with caution!
[DFT] HSPL / RSPL for HTC WP7 First Generation
It wouldn't be because of the Mango Beta, flashing the ROM should of reformatted the ROM chip & SD Card, erasing Mango.
I have the same problem, still gets stuck on HTC screen, could it be the SD card is not working, I try to put in restore so I can restore it starts normally but when it restarts the phone to continue to restore it gets stuck at HTC screen, and is there a way to check to see if the SD card is OK.
CoffeeM said:
I have the same problem, still gets stuck on HTC screen, could it be the SD card is not working, I try to put in restore so I can restore it starts normally but when it restarts the phone to continue to restore it gets stuck at HTC screen, and is there a way to check to see if the SD card is OK.
Click to expand...
Click to collapse
To check the SD Card, you need a Nokia device. Nokia devices can format WP7 SD Cards. Nothing else will recognize the format WP7 uses. Plus, you have to open the device up to get it out, which in most cases will void your warranty. One of the screws has a void sticker on it & if your try removing that screw, your warranty is void as they can see you tried removing the screw by the sticker being missing or damaged.
If possible, list all software I can try to restore or fix, or tweak to make work or reset something in the phone to work! Anything at all!
That's no problem for me, I bought from a friend! I have nothing to lose. And do you know the software to format the SD disk!
Oh wait, are you trying to restore after successfully installing a new ROM?
If so, don't restore, the restore isn't compatible anymore. You can reinstall all apps by finding them in the marketplace again (on device, not ZUNE PC). As long as you use same live ID on setup, the apps should be read as purchased.
CoffeeM said:
That's no problem for me, I bought from a friend! I have nothing to lose. And do you know the software to format the SD disk!
Click to expand...
Click to collapse
In order to format the SD Card, you need a Nokia Cell. I believe it's their meego/Symbian OS that can find the card. Hopefully you or a friend has one. Lucky for me my roommate has a Nokia Nuron if I ever needed to do this.
So I can't restore it anymore since I install new boot loader. Or it doesn't matter.
CoffeeM said:
So I can't restore it anymore since I install new boot loader. Or it doesn't matter.
Click to expand...
Click to collapse
Bootloader doesn't matter, if you flash a new ROM, it does as the restore won't be compatible with the new ROM. The restore must be made from the current ROM at least to my knowledge. It could be that maybe the restore is corrupt even.
There is also a tool that lets you do it in Windows. It was by Samsung or something. I'll try to find it and post it in here.
drkfngthdragnlrd said:
In order to format the SD Card, you need a Nokia Cell. I believe it's their meego/Symbian OS that can find the card. Hopefully you or a friend has one. Lucky for me my roommate has a Nokia Nuron if I ever needed to do this.
Click to expand...
Click to collapse
Sent from my LG-P999 using XDA App
drkfngthdragnlrd said:
In order to format the SD Card, you need a Nokia Cell. I believe it's their meego/Symbian OS that can find the card. Hopefully you or a friend has one. Lucky for me my roommate has a Nokia Nuron if I ever needed to do this.
Click to expand...
Click to collapse
a sony psp will also do this, provided you have the microsd to mspd converter.
But, why doesn't it work after flash, after many attempt still gets stuck at HTC screen, the phone is probable not repairable right, or there still may be a chance for me to get it back again!