Hi, I recently updated MangoB2, and it was working fine, but I tried to play a video and it froze and went off, and came to connect to PC screen, and when I try to restore, it shuts the phone off and it restarts the phone. Plus, it also can't recover using windows phone support tool, please help!!!
CoffeeM said:
Hi, I recently updated MangoB2, and it was working fine, but I tried to play a video and it froze and went off, and came to connect to PC screen, and when I try to restore, it shuts the phone off and it restarts the phone. Plus, it also can't recover using windows phone support tool, please help!!!
Click to expand...
Click to collapse
My first question is, is there any ROM's available for your device. If so, boat into the tri-color screen & try flashing a ROM. Also, have you tried Hard resetting your device.
Yes I did try to hard reset, but it does it quickly, and says to restart my phone, and my phone is HTC T8788, also when i try to restore in Zune it stops at 16%,
CoffeeM said:
Yes I did try to hard reset, but it does it quickly, and says to restart my phone, and my phone is HTC T8788, also when i try to restore in Zune it stops at 16%,
Click to expand...
Click to collapse
Did you try booting into the Tri-Color Screen & flashing one of the ROM's from here?
Hold Volume down & press power, keep holding volume down until you see the tri-color screen (red/blue/green/white), when connected to PC it'll say USB at the bottom & windows should install a new driver. Than you run the flashing program from one of those threads.
I can't do it, it doesn't work, now it freezes on HTC white screen, and doesn't connect to restore either,
Nobody is going to help you if you aren't trying suggestions.... It should most definatly go into bootloader... It won't even have a chance to freeze nothing loads at that point.
Sent from my HD7 using XDA Windows Phone 7 App
I did try to flash, but this only works, RUU_Mondrian_Cingular_US_1.03.502.07_5.51.09.06_22.30.50_RELEASE other ones I get [error] 208, but still it get stuck at HTC screen, is it because I have to have nk.nbf file, if so can anyone tell me where and how I can get it working, I tried all night and still trying to fix, I really need it working!
The phone still gets stuck at HTC screen, even after flash, I tried everything, could it be because I have Windows Phone 7.5 Beta 2 in there.
CoffeeM said:
The phone still gets stuck at HTC screen, even after flash, I tried everything, could it be because I have Windows Phone 7.5 Beta 2 in there.
Click to expand...
Click to collapse
If it's still getting stuck, maybe you have a faulty SD Card or the ROM chip got corrupted somehow. You may have to send it in under warranty. My only other suggestion would be to try RSPL or HSPL (HSPL void warranty) & than try flashing a ROM again if RSPL/HSPL supports your model of the HTC Surround. I'd suggest RSPL as it's temporary & won't cause any warranty issues.
Instructions:
1) Boot into Tri-Color Screen with Volume down feature.
2) Connect to USB to PC.
3) Wait for Windows to install new hardware driver. (Should be done already as you tried flashing already)
4) Run DFT_RSPL_WP7FG1_LAUNCH.exe from ZIP attachment in thread linked below.
5) Wait for your device to reboot back into Tri-Color Screen on it own.
6) Flash ROM. Optionally, flash HSPL with DFT_HSPL_WP7FG1_INSTALL.exe from same zip, than flash the ROM.
NOTE: Using HSPL flashes it to ROM & if you are having hardware issue, this could completely brick the device. So, proceed with caution!
[DFT] HSPL / RSPL for HTC WP7 First Generation
It wouldn't be because of the Mango Beta, flashing the ROM should of reformatted the ROM chip & SD Card, erasing Mango.
I have the same problem, still gets stuck on HTC screen, could it be the SD card is not working, I try to put in restore so I can restore it starts normally but when it restarts the phone to continue to restore it gets stuck at HTC screen, and is there a way to check to see if the SD card is OK.
CoffeeM said:
I have the same problem, still gets stuck on HTC screen, could it be the SD card is not working, I try to put in restore so I can restore it starts normally but when it restarts the phone to continue to restore it gets stuck at HTC screen, and is there a way to check to see if the SD card is OK.
Click to expand...
Click to collapse
To check the SD Card, you need a Nokia device. Nokia devices can format WP7 SD Cards. Nothing else will recognize the format WP7 uses. Plus, you have to open the device up to get it out, which in most cases will void your warranty. One of the screws has a void sticker on it & if your try removing that screw, your warranty is void as they can see you tried removing the screw by the sticker being missing or damaged.
If possible, list all software I can try to restore or fix, or tweak to make work or reset something in the phone to work! Anything at all!
That's no problem for me, I bought from a friend! I have nothing to lose. And do you know the software to format the SD disk!
Oh wait, are you trying to restore after successfully installing a new ROM?
If so, don't restore, the restore isn't compatible anymore. You can reinstall all apps by finding them in the marketplace again (on device, not ZUNE PC). As long as you use same live ID on setup, the apps should be read as purchased.
CoffeeM said:
That's no problem for me, I bought from a friend! I have nothing to lose. And do you know the software to format the SD disk!
Click to expand...
Click to collapse
In order to format the SD Card, you need a Nokia Cell. I believe it's their meego/Symbian OS that can find the card. Hopefully you or a friend has one. Lucky for me my roommate has a Nokia Nuron if I ever needed to do this.
So I can't restore it anymore since I install new boot loader. Or it doesn't matter.
CoffeeM said:
So I can't restore it anymore since I install new boot loader. Or it doesn't matter.
Click to expand...
Click to collapse
Bootloader doesn't matter, if you flash a new ROM, it does as the restore won't be compatible with the new ROM. The restore must be made from the current ROM at least to my knowledge. It could be that maybe the restore is corrupt even.
There is also a tool that lets you do it in Windows. It was by Samsung or something. I'll try to find it and post it in here.
drkfngthdragnlrd said:
In order to format the SD Card, you need a Nokia Cell. I believe it's their meego/Symbian OS that can find the card. Hopefully you or a friend has one. Lucky for me my roommate has a Nokia Nuron if I ever needed to do this.
Click to expand...
Click to collapse
Sent from my LG-P999 using XDA App
drkfngthdragnlrd said:
In order to format the SD Card, you need a Nokia Cell. I believe it's their meego/Symbian OS that can find the card. Hopefully you or a friend has one. Lucky for me my roommate has a Nokia Nuron if I ever needed to do this.
Click to expand...
Click to collapse
a sony psp will also do this, provided you have the microsd to mspd converter.
But, why doesn't it work after flash, after many attempt still gets stuck at HTC screen, the phone is probable not repairable right, or there still may be a chance for me to get it back again!
Related
Welcome! Almost everyone has done it. Bad flash and suddenly your $400 device is a paper weight! Woaaaaaah! Even I have to admit I have done it, many times. But there is hope! Read on.
It is not easy to brick a device if you actually read and follow all of the steps and guidelines before a flash. In fact, not many things can go wrong unless a USB cables disconnects during a flash, your PC crashes in the middle of a flash, or you flash a corrupt image file to your device. Statistically, most of the time people only think their device is "bricked" when actually it's not.
There are currently three methods you can use depending of the severity of the "bricking". The first method will unbrick 50% of all Maples that have simply "locked up" and won't reboot properly. The second method will unbrick 95% of all Maples that encountered flashing problems or flash failures.
** Please perform these steps and methods at your own risk. I am not responsible for any damage you cause your device using this guide.
If you're new to the Maple or SmartPhones in general, please take the time to read the the forums for valuable info before you post or try any of these steps.
But, before I even get into unbricking, if your phone is in fact working right now, I highly recommend you flash HardSPL by JockyW to avoid even having to follow these steps anytime in the future. The steps and info for HardSPL and JumpSPL can be found in this thread by jockyw2001.
HardSPL basically flashes your phone with an "unlocked" security partition so all security checks are bypassed when you try to flash a cooked ROM or a ROM designed for another variation of the Maple such as HTC (SNAP), TMO Dash3G, etc. Makes life much easier when trying different ROMS or cooking and testing your own! Thanks to jockyw2001!!
Ok, so onto the fun stuff...
Flashing:
First a bit of background and info on the different types of ROM images. There are a few different types of ROMS. Carrier released "signed" ROMS, carrier "signed" TEST ROMS, and custom "unsigned" cooked ROMS. The first two are usually released by the carrier (HTC, TMO, AT&T, VOD, etc.). These carrier "signed" ROMS can be flashed anytime without any modifications to the bootloader, SPL, or the device itself. The device already has security checks and certificates in place to check the ROM you are trying to flash to make sure it is official. They do this to avoid users from sending back their "bricked" devices after a failed flash or just user error. This applies to TEST ROMS as well however, TEST ROMS are for just that, TESTING. They usually have an expiration date or "timebomb" applied when the testing period has expired. Cooked ROMS, on the other hand, require unlocking the security checks of the bootloader (SPL) in order to flash successfully. This clarify, this method has several names and is also called CID unlocking, JumpSPL/SSPL (temporarily bypass security checks), HardSPL (permanently bypass security checks), and CID bypassing. Here are the steps to a happy user and a successful flash:
Remove your SD Card
If your device is already hardSPL, proceed to step 10
If using JumpSPL, boot your device up to your homescreen
Download and unzip the ROM package file
If flashing a custom cooked ROM, run auto.bat, or auto_1.17.bat, or auto_1.19.bat (depending on your SPL version)
Follow the prompts in the DOS window
Hit "continue" (trackball button) on your phone, screen will turn black
Run RomUpdateUtility.exe (if it doesn't run via the script)
The flash will take about 5 minutes
If your device is already HardSPL, simply run RomUpdateUtility.exe and follow the prompts
Upon first boot, it will seem frozen for a few minutes, maybe even go black. This is NORMAL!
Enjoy!
Unbricking:
Your phone won't boot... Either it's locked up and simply stopped booting or you flashed your phone and it won't boot. What do you do??
Method 1: Assuming you didn't get "bricked" from a flash problem, the first and easiest method for "unbricking" your device is (this will erase ALL data on your device):
(This method works for 50% of supposedly "bricked" devices)
Remove your SIM and SD card
Remove and reinsert your battery
While holding the volume UP key, press the power button
Continue holding the volume UP key until a black screen appears saying "This operation will delete all your..."
Press "'send"' to restore to hard reset your phone
Let the phone cold boot and restore
That didn't work!! . This next method will reflash your phone to the factory ROM.
Method 2: Second way to the path of unbricking is:
(This method will unbrick 95% of all Maples)
Get a hold of your Shipped ROM. You can find these ROMS either on HTC's site (with a valid serial #), TMO's site (http://www.t-mobile.com/wmupgrade/ with a valid IMEI), or right here at XDA Developers (search for it).
Download one of the factory ROMS and unpack it. **Remember, if your phone is a TMO Dash3G, you MUST use a TMO Dash3G ROM. If your phone is HTC Branded, you MUST use an HTC ROM, etc., etc., etc...
Remove the SD card if one is inserted in the phone
Remove the battery from your phone for a few seconds. I found this step to be essential to reset the device. Put the battery back in.
While holding volume DOWN button, press the power button. The phone will enter "bootloader" mode and you will see a tricolor bootscreen.
While in this mode, plug in your USB cable and you will hear the "ba-bing" USB sounds as the device connects
Unpack the ROM package you just downloaded and run RomUpdateUtility.exe. Follow the steps, check the appropriate boxes, and start the flash
Assuming all goes well, your phone will flash to the factory ROM and you can then troubleshoot what went wrong the first time that bricked your phone.
Method 3: The "goldcard" final method is a bit more intensive so follow closely:
(This method will unbrick 99% of all Maples regardless of branding)
Get a cup of coffee or tea
You will need a working Donor HTC device with a microSD slot and a microSD card that is smaller than 1GB (will be formatted) to create "goldcard" image using QMAT tools as described below
You will need QMAT. Get it from http://revskills.de/index.html.
Go to the Download Link and download the latest version and unpack QMAT
Have some coffee
Use a SD card reader in your PC to access the SD card through Windows. Format the SD card with FAT32.
* Insert the SD card into the donor HTC device and connect the USB cable. If you unchecked "Allow USB Connections" in Activesync in an earlier step, make sure you recheck it so that you can establish a full USB sync connection to the HTC device.
Open QMAT and go to the "Hardware Forecsics" (version 5.04 and below) or "Calculators/Generators" (version 5.05 and up) menu and select "Generate HTC Goldcard"
In "Select device key:" select the Maple
You will need the serial number from the SD card so click the "Get SD Card Serial from WINCE Device" button
Once the Serial number appears in the box, click the "Save Goldcard Image to WINCE SD" button below
If no errors pop up and all goes well, proceed to these next steps
If you get an error or a popup saying "Goldcard for newer devices isn't implemented in newer devices", you must buy and register the software. Believe me, it's worth the small amount of $ you will spend to bring your expensive device back to life!
Now remove the SD card with the newly written Goldcard image from the Donor HTC device
Insert the SD card back into your PC using the microSD card reader adapter. Browse to the drive letter assigned to it. You will see no files on the SD card, this is normal.
(If, for some reason your PC sees the SD card as unformatted, something went wrong. Remove it and reinsert it into the Donor HTC device. The device should see the card as unformatted and ask you to format it, say yes. Now go back to the "* Insert the SD card into the donor HTC device" step above and repeat the steps)
Unpack your HTC, T-Mobile, or other factory ROM and copy RUU_Signed.nbh to the SD card. Once it had finished copying, rename the file to MAPLIMG.nbh. Remove the SD card from the PC.
Make sure the Maple is off and insert the SD card
Enter bootloader mode as mentioned earlier (hold the volume down button while pressing the power button)
You will see a gray screen that says "loading". It will then find the MAPLIMG.nbh file and ask if you would like to start the update process. Follow the instructions and let the phone flash.
You can also do the update using the Rom Update Utility with the USB cable if you like
It will take 10 mins but your phone should boot fine and be back in action!
QMAT is a VERY powerful tool written by viperbjk that allows for full low level manipulation of HTC and WINCE tasks. Read all about it here http://revskills.de/index.html.
Many thanks to jockyw2001 for his amazing HTC device knowledge! Also thanks to all who contributed to this post.
Hope this tutorial helps!
great tuto!!! thanks thanks
it's all clear now.
Is there a factory rom for the HTC Ozone on VZW? I cannot locate it on this site nor HTC's nor VZW's.
Thanks
WOW
This helped me a lot
Method 2: Second way to the path of unbricking is:
Thanks you very much
87vert said:
Is there a factory rom for the HTC Ozone on VZW? I cannot locate it on this site nor HTC's nor VZW's.
Thanks
Click to expand...
Click to collapse
No factory ROM updates available yet.
I seem to lose internet access when i do this..
I seem to lose internet access when i do this..
http://www.htc.com/us/SupportDownload.aspx?p_id=257&cat=0&dl_id=684
Saw this in the main thread. Is it possible to get the signed stock rom for an S511 from this?
New to the winmo modding thing, so excuse me if I'm an idiot.
No signed ROM available at this time.
Kind of figured as much. So, I guess the next question is, once you have HardSPL applied, if the rom flash fails, can you recover with any rom?
I want to load 6.5, I'm a bit apprehensive though, because the 6.1 update for the Ace locked up mid-flash, and bricked the phone. My company's IT department is...sluggish when it comes to replacing dead phones.
No, you can only recover with a signed ROM intended for the device. Not a cooked ROM.
amirthanto said:
This helped me a lot
Method 2: Second way to the path of unbricking is:
Thanks you very much
Click to expand...
Click to collapse
hi, can you tell me how you managed to get the shipped signed rom? i am scratching my head and pulling my hairs over this. thanks alot!
my bro helped me to flash the hspl by jock the other day, however, he failed to notice it was only for willow snap s511 and not for maple. (confusion btwn the htc SNAPS) now what i have is a only phone that keeps rebooting at 'smart mobility' and then resets itself back to the same screen after showing some red codes at the bottom right.
I have tried your unbricking method 1,2 but I cant find a donor so no go for 3. I have done a hard reset but to no avail and am able to bootload. below are the details. is there a way to rescue it? really appreciate any help rendered. i did not managed to find a shipped rom but i heard from gawain that you can flash a rom from sdcard? my set is htc snap s526 from singapore though. =(
MAP110
SPL-1.19.0000
MicroP-Maple(LED)v6
ENGID 0x2
PCBID 0X90
PanelInfo 15-0x2
UGGGHH
I can't believe how complicated this has turned out to be.
I've read and re-read the posts, and other posts to be sure. I've even flashed a MotoQ before.
I don't know if it's Verizon or what, but my Ozone will only boot up to the HTC loading image and thats it.
I can get into bootloader and it looks like the HARDSDL is installed, and I even can start the ROM Utility, but it just shows 0% forever and then errors out about communication problem.
I'm so frustrated.
Delacombo said:
I can't believe how complicated this has turned out to be.
I've read and re-read the posts, and other posts to be sure. I've even flashed a MotoQ before.
I don't know if it's Verizon or what, but my Ozone will only boot up to the HTC loading image and thats it.
I can get into bootloader and it looks like the HARDSDL is installed, and I even can start the ROM Utility, but it just shows 0% forever and then errors out about communication problem.
I'm so frustrated.
Click to expand...
Click to collapse
try the sd method with an original shipped rom....
http://forum.xda-developers.com/showpost.php?p=4872255&postcount=78
Same problem here. Even tried tried what ibanyard said. It loaded up and went 100 percent but then said Error (294) Invalid Vendor ID. I also noticed that my windows moblie/active sync is disconecting.
Unbricking HTC snap (Sprint)
Hi can you give step by step instructions on how to unbrick a HTC Snap, I never flashed anything on it. but recently it started acting weird and so i turned it off and turned it back on, but when i powered it on it came up to the screen where it just says "htc Snap" and its stuck there
help!
*UPDATE* I found out that this issue is addressed by HTC with a hotfix I will try that and if it doesnt work come back here
I think I've bricked my Snap as well after a failed ROM update (flashing stopped at around 98%). The phone stays on the HTC logo screen and doesn't continue with the boot. I'm able to put it on bootloader mode but when running the ROM update it always stays at 0%. The Sprint "hotfix" doesn't take care of this either. When I run the ROM update utility there is no Image Version being reported by the phone at all. I've also tried to update using the miniSD card but all I get is "No image file found".
Anyone had any experience/luck taking a phone in this state into the Sprint (or whichever) store and ask them to fix/reflash it?
technosavviest said:
my bro helped me to flash the hspl by jock the other day, however, he failed to notice it was only for willow snap s511 and not for maple. (confusion btwn the htc SNAPS) now what i have is a only phone that keeps rebooting at 'smart mobility' and then resets itself back to the same screen after showing some red codes at the bottom right.
I have tried your unbricking method 1,2 but I cant find a donor so no go for 3. I have done a hard reset but to no avail and am able to bootload. below are the details. is there a way to rescue it? really appreciate any help rendered. i did not managed to find a shipped rom but i heard from gawain that you can flash a rom from sdcard? my set is htc snap s526 from singapore though. =(
MAP110
SPL-1.19.0000
MicroP-Maple(LED)v6
ENGID 0x2
PCBID 0X90
PanelInfo 15-0x2
Click to expand...
Click to collapse
I have the exact same problem! Still didn't find the answer.
i have a bricked telus snap s510, when attempting to flash the hardSPL i accidently flashed the 3V0 rom instead and bricked it. anyone know how i can unbrick it? i tried methods 1, 2 & 3 and none of them work. the gold card method just sits at loading... after entering bootloader.
tried hard reset, and when phone is turned on normally it just sits at the smart mobility screen. any suggestions on what to do?
**MY PHONE IS NOW WORKING***
Hey guys,
I am going to start by saying that I have read almost every single sticky, thread, wiki and anything else I could get my grubby hands on to try and solve my problem; but I fear I may have missed something, or done it wrong.
Now to my problem. My friend who had the same phone as me did a HardSPL flash a long time ago and gave me some new ROM. It worked for awhile but wasn't great so we changed to a different ROM. After awhile I got sick of this one and all of its bugs so about 3 days ago we got some with windows 6.5; unfortunately something happened; causing it to be highly unstable, so we switched AGAIN.
Now to my problem. It will not boot. If I just let it boot without doing anything *or if I hit keys* it goes to an hTc TyTn2 screen with the R; G; and D displayed. I tried to flash it via Micro sd card but all I get is a white screen with blue "loading..." and nothing; it will sit there indefinitely. I have been following cmonex's instructions to a "T" and I am stuck. I attempted to do the USB route and the phone will display the tri-colors and say USB, but my computer *Vista* isn't seeing the phone. I tried different USB ports etc. and nothing. Please let me know what you guys think; anything would be greatly appreciated.
~big3
I would recommend down-grading to xp. But if you can't try to explore the drive as a removable driver
Are you sure when you flashed it via MicroSD you had only one file named KAISIMG.nbh on the card?
This happened to me about a month ago, if it's still going to bootloader there is a good chance you can recover but the process is a bit intricate, especially to a newcomer like myself. I spent more time reading on how to fix this issue than I did on the entire process of flashing roms, mtty specifically. These are the threads I used to get running again, don't lose hope. I assure you the your answer is there.
http://forum.xda-developers.com/showthread.php?t=397157&page=4
http://forum.xda-developers.com/showthread.php?t=371154
http://forum.xda-developers.com/showthread.php?t=370169
I am sure. I even reformatted the sd card to a FAT32. It goes to a loading screen then freezes. I can also get it into the tri-color screen and have it say USB at the bottom, but when I try and flash it via USB; for some reason it starts at 0% and then crashes.
I am able to work with it in MTTY and I had to use a Task 8 command for anything to happen. I was told my friend already did a HARDSPL; is it possible that this was deleted/ corrupted?
Put your phone in bootloader mode what does it say?
Have you tried a Hard Reset yet?
Ta
Dave
hey everyone, My phone is temporarily working at this point!!!
My new question is, how do I know if my friend really put a HardSPL on my cell the first time. I know that one way to tell was through MTTY and boot command, but my cell didn't respond to that. My friend said he put a HardSPL on; would doing it again hurt anything?
big3 said:
hey everyone, My phone is temporarily working at this point!!!
My new question is, how do I know if my friend really put a HardSPL on my cell the first time. I know that one way to tell was through MTTY and boot command, but my cell didn't respond to that. My friend said he put a HardSPL on; would doing it again hurt anything?
Click to expand...
Click to collapse
Put your phone in bootloader mode and if it says "hard" next to "SPL:" it's got a hrd SPL version.
Ta
Dave
I am trying to flash a HardSPL to my phone; the computer see's the device but will not allow me to copy any files to it. When I go though the sync center, it begins to connect then says error. What should I do?
big3 said:
I am trying to flash a HardSPL to my phone; the computer see's the device but will not allow me to copy any files to it. When I go though the sync center, it begins to connect then says error. What should I do?
Click to expand...
Click to collapse
Try copying them via the SD card using a card reader if you have one.
Ta
Dave
tryd that, all it does is say loading and pretty much stays there indefinately.
Right, lets take a step back...
You don't have Hard SPL at the moment?
If not, the best guide for flashing Hard SPL is here : http://forum.xda-developers.com/showthread.php?t=433835
Follow through what mskip advises and let me know if you get stuck and at what point.
Ta
Dave
I get stuck at the very first step were you are supposed to copy the 3 different JumpSPL files. I even tried copying a word document and it said "the file Reference could not be copied. It may not exist or cannot be transferred."
My computer can access the phone, but I cannot transfer anything to its memory. I also tryed copying it to the sd card while it is in the phone and it gives me the same error. Active sync whont work either, just keeps saying error.
big3 said:
I get stuck at the very first step were you are supposed to copy the 3 different JumpSPL files. I even tried copying a word document and it said "the file Reference could not be copied. It may not exist or cannot be transferred."
My computer can access the phone, but I cannot transfer anything to its memory. I also tryed copying it to the sd card while it is in the phone and it gives me the same error. Active sync whont work either, just keeps saying error.
Click to expand...
Click to collapse
Try deleting and re-creating the partnership... Do you have Office installed, this might stop if working.
Do you have a Card Reader, put the card in there and put the files on the card that way.
Failing that MyMoblier let's you copy files, I think it works differently to AS.
Dave
i have deleted the partnership and created a new one, and it doesnt work. As for mymobiler; the website will not load for me on either my desktop or laptop.
one thing i just tryed which was interesting was to load the 3 JumpSPL files onto the sdCard and then copy them to the phone's main memory. It wouldnt allow me to do this. How do I remove the read/write protection on the phone?
big3 said:
Hey guys,
I am going to start by saying that I have read almost every single sticky, thread, wiki and anything else I could get my grubby hands on to try and solve my problem; but I fear I may have missed something, or done it wrong.
Now to my problem. My friend who had the same phone as me did a HardSPL flash a long time ago and gave me some new ROM. It worked for awhile but wasn't great so we changed to a different ROM. After awhile I got sick of this one and all of its bugs so about 3 days ago we got some with windows 6.5; unfortunately something happened; causing it to be highly unstable, so we switched AGAIN.
Now to my problem. It will not boot. If I just let it boot without doing anything *or if I hit keys* it goes to an hTc TyTn2 screen with the R; G; and D displayed. I tried to flash it via Micro sd card but all I get is a white screen with blue "loading..." and nothing; it will sit there indefinitely. I have been following cmonex's instructions to a "T" and I am stuck. I attempted to do the USB route and the phone will display the tri-colors and say USB, but my computer *Vista* isn't seeing the phone. I tried different USB ports etc. and nothing. Please let me know what you guys think; anything would be greatly appreciated.
~big3
Click to expand...
Click to collapse
did you ask this question in those threads? i just searched all your posts and im not seeing where you asked in those threads before you started a new thread.
didn't see where you tried to flash stock rom either, i recommend trying to flash it, and flash stock before you flash any cooked roms.
i never said I did any of the flashing. my friend did it all, and he claims to have done the hardspl. he then loaded new ROM onto the phone. Since he is no longer around, and everything has gone hay-wire, I am trying to fix it.
Here is my new situation; I can get the phone to fully load into the rom, but it does not have the HardSPL installed. The computer will recognize that the phone is plugged in, but active sync will not connect; just says error. If i go through "my computer" and try and copy files that way it says: "the file Reference could not be copied. It may not exist or cannot be transferred." I have tried to just re-flash it *because i really need it up and running* and the programs just say they cannot. I even used CID unlocker and it says it failed. I just don't know where to go from here.
Try doing a Hard Reset and see if your symptoms change. NOTE: Remove the SD Card.
Hey guys looks like a bricked my 2 week old Sprint Touch Pro 2. I can't get pass the touch pro 2 logo screen now and I'm very upset with myself. Is there a way to possible unbrick the phone. I tried to sync it with my PC no response. Also i did back it up with " Microsoft My Phone " earlier in the day and its backed up on WMDManager too. I will try to take it to sprint for warranty and see what the will do. HAPPY NEW YEAR people!!
clariceave said:
Hey guys looks like a bricked my 2 week old Sprint Touch Pro 2. I can't get pass the touch pro 2 logo screen now and I'm very upset with myself. Is there a way to possible unbrick the phone. I tried to sync it with my PC no response. Also i did back it up with " Microsoft My Phone " earlier in the day and its backed up on WMDManager too. I will try to take it to sprint for warranty and see what the will do. HAPPY NEW YEAR people!!
Click to expand...
Click to collapse
Depending on what happened, it's a yes/no situation. What did you do?
Try this:
get into bootloader mode (tri-color screen): Take out the battery for one minute. Put it back in. Getting into bootloader mode is done by holding the Volume down button while you do a press/release of the Reset button. OR hold the Volume down button while you do a press/release of the Power button.
That should get you to bootloader mode. Now, plug in your USB to the PC. Flash a CDMA ROM from there by running the .exe. If you cannot do that, transfer the .nbh file (rename it to "RHODIMG.nbh" [no quotes]) and follow these instructions.
Good luck, and happy new year!
*The majority of the CDMA ROMs can be found at PPCGeeks*
PLEASE HELP ME UNBRICK MY TOUCH PRO 2 (tmobile)
i was installing a ROM onto my TP2 but i accidentally installed a CDMA ROM instead of a GSM ROM. My phone loads past the TP2 startup screen but then stays white with the rom info on the bottom. I tried to do the bootlegger with the 4 colors on the screen but it doesnt work. Also tried a hard reset. CAN SOMEONE PLS PLS PLS HELP? thanks
foxxyroxy5 said:
i was installing a ROM onto my TP2 but i accidentally installed a CDMA ROM instead of a GSM ROM. My phone loads past the TP2 startup screen but then stays white with the rom info on the bottom. I tried to do the bootlegger with the 4 colors on the screen but it doesnt work. Also tried a hard reset. CAN SOMEONE PLS PLS PLS HELP? thanks
Click to expand...
Click to collapse
Well, this forum is for CDMA TP2s, but I'll help.
So you took out the battery for at least one minute? Then you put it back in. Get into bootloader mode (T-Mobile version: phone is off, hold the Volume Down button while you press/release the Power Button. Keep holding the Volume Down button until the colorful screen shows up).
When you're in bootloader, plug in your TP2 to your PC. Now run the .exe of a GSM ROM and follow the steps, as if your phone is synced to the PC. (aka flash as you would usually do).
To flash via the Storage Card: On your PC, go to Start > My Computer > Removable Disk drive (something like that; make sure this is your phone's Storage Card). Drag the .nbh of a GSM ROM there. Rename the .nbh "RHODIMG.nbh" (no quotes). Unplug your Phone. Take out the battery again for one minute. Now, go back into bootloader (hold Volume Down button and press/release Power button [keep holding the Volume Down button]). Follow the steps to flash the phone.
Good luck.
RE:LEASE HELP ME UNBRICK MY TOUCH PRO 2 (tmobile)
Thank you very much for helping me with my TP2 problem! You were my last resort and i was going to give up. It works perfectly fine! I really really appreciate it! THANK YOU AGAIN
Should work
foxxyroxy5 said:
i was installing a ROM onto my TP2 but i accidentally installed a CDMA ROM instead of a GSM ROM. My phone loads past the TP2 startup screen but then stays white with the rom info on the bottom. I tried to do the bootlegger with the 4 colors on the screen but it doesnt work. Also tried a hard reset. CAN SOMEONE PLS PLS PLS HELP? thanks
Click to expand...
Click to collapse
You did exactly the reverse of what I did, and the instructions already given are how I resolved it: put it in bootloader and flash a compatible ROM. I flashed a stock ROM just to be sure, but that's probably not needed.
foxxyroxy5 said:
Thank you very much for helping me with my TP2 problem! You were my last resort and i was going to give up. It works perfectly fine! I really really appreciate it! THANK YOU AGAIN
Click to expand...
Click to collapse
No problem. Enjoy your unbricked TP2 this new year!
Bricked my Sprint Touch Pro 2
i downloaded a hotfix for internal gps from htc website for Sprint touch pro 2. after i tried to install it the phone went off and now it won't even power on or go to boot loader.. any suggestions on how i can fix this i was using Mighty Rom 6.5 with htc sense 2.1
[email protected] said:
i downloaded a hotfix for internal gps from htc website for Sprint touch pro 2. after i tried to install it the phone went off and now it won't even power on or go to boot loader.. any suggestions on how i can fix this i was using Mighty Rom 6.5 with htc sense 2.1
Click to expand...
Click to collapse
See if you can do a hard-reset right now. While phone is off (which it is), press and hold Talk/Send, End, and Power button at the same time. Wait for a screen to pop-up. Follow steps to hard reset. That will bring it back to factory defaults.
If it doesn't work, maybe you could post your question on PPCGeeks, where a lot of CDMA people go. They might be able to help you.
Can you Unbrick a Touch Pro 2
Hi to all,
I'm a new here and a little desperate . I flashed my rom by using a raphael update instead of Rhodium. My phone got bricked. My phone is a Sprint HTC touch pro 2.
At the moment, it will not boot, when I plug it to my computer and it was looking for qualcomm cdma MSM drivers.
I tried sof and hardware reset including the boot loader. Nothing works. I also tried using different RUUs. Nothing works. I hope somebody can help me.
Fixed the problem...bought an android...ha,ha...
smileyzst said:
The same exact thing happened to my tp2.Accidently flashed touch pro(RAPHEL)rom and now nothing!!It won't power on or anything,can someone help me too...Is my phone bricked???? Help please!!!
Click to expand...
Click to collapse
Well if you can power it on, and go to bootloader, then your phone is just fine. Just flash a Rhodium ROM.
I suggest take battery out, and put it back in after few seconds, to see if it powers on. If not, leave it in the charger, and see if it powers on.
After installing the HardSPL, I decided to flash my US Cellular CDMA phone with a GSM rom and of course it bricked it. The phone would only boot to bootloader, so I was going to have it repaired for $70. But if I was willing to flash my device, then I'm sure as willing to look for a DIY solution somewhere. Goodthing I searched this forum, because the answers where right here!
Just format your microSD to FAT32, install an extracted stock ROM kit to the root of the SD insuring you rename the .nbh to RHODMIG.nbh and place the other extracted files on the SD as well. Place the microSD in your HTC Touch Pro2 and boot to bootloader. You may have to take steps to get to the bootloader, mine booted to bootloader automatically anyway at that point. Follow onscreen instructions, and your Touch will be as good as new!
thanks a million for helping me unbrick my tp2
wow man thanks a million, i followed the instru and it worked but was slow so i did task 29 and flashed the rom i wanted and it works great, i really appreciate your help on this
How did you get to the bootloader menu. I am using CDMA HTC Pro 2 by Sprint. Thanks
goldenu said:
You did exactly the reverse of what I did, and the instructions already given are how I resolved it: put it in bootloader and flash a compatible ROM. I flashed a stock ROM just to be sure, but that's probably not needed.
Click to expand...
Click to collapse
@rocco24
Did everything go alright? If not, just post here or send me a PM.
Hi i have a different issue I accidentally flashed the wrong nv items 01192 and now its rebooting. if someone can dump their tp2 sprint 6.5 nv items please help. I am cut off from the world of cell phones at the time. I read that i also would need the radio dump which in my case is the same one on the 6.5 ruu windows version. any feed back or advice is welcome. please help guys.
Oscar
sumflipnol said:
Well, this forum is for CDMA TP2s, but I'll help.
So you took out the battery for at least one minute? Then you put it back in. Get into bootloader mode (T-Mobile version: phone is off, hold the Volume Down button while you press/release the Power Button. Keep holding the Volume Down button until the colorful screen shows up).
When you're in bootloader, plug in your TP2 to your PC. Now run the .exe of a GSM ROM and follow the steps, as if your phone is synced to the PC. (aka flash as you would usually do).
To flash via the Storage Card: On your PC, go to Start > My Computer > Removable Disk drive (something like that; make sure this is your phone's Storage Card). Drag the .nbh of a GSM ROM there. Rename the .nbh "RHODIMG.nbh" (no quotes). Unplug your Phone. Take out the battery again for one minute. Now, go back into bootloader (hold Volume Down button and press/release Power button [keep holding the Volume Down button]). Follow the steps to flash the phone.
Good luck.
Click to expand...
Click to collapse
I wonder if you can help me; i have a sprint hybrid cdma/gsm and it has black screen no lights at all but the qualcomm cpu is easily recognized by pc-have tried all known methods to get in bootloader but i get no lights at all??-have fully charged batt from another tp2=any experience w this problem?-thanks
keeps rebooting?
Hello, I'm wondering if anyone has experienced the problem I'm facing:
I have the latest Energy rom, with Android 2.3 on SD card. Android proved to be quite unstable and requires soft resets every now and then. Most of the time I would let it boot into WinMo and then run Haret again to get into Android.
Yesterday I left in running in Android all day, and in the evening I noticed the phone had died. Thinking it was just out of battery, I just plugged it in, let it charge for a few hours, then tried to boot it up. But it just kept rebooting, never getting pass the Touch Pro 2 boot screen.
Did hard resets twice, same thing. Re-flash the rom, same thing. Took out SD card, flashed again, same thing. Everything I tried, it would not get pass the initial boot screen, and just cycles the reboot again. Oh by the way, the hard resets and re-flashes are all successful with no errors.
Anyone have a solution to this? Thanks!
velo25 said:
Hello, I'm wondering if anyone has experienced the problem I'm facing:
I have the latest Energy rom, with Android 2.3 on SD card. Android proved to be quite unstable and requires soft resets every now and then. Most of the time I would let it boot into WinMo and then run Haret again to get into Android.
Yesterday I left in running in Android all day, and in the evening I noticed the phone had died. Thinking it was just out of battery, I just plugged it in, let it charge for a few hours, then tried to boot it up. But it just kept rebooting, never getting pass the Touch Pro 2 boot screen.
Did hard resets twice, same thing. Re-flash the rom, same thing. Took out SD card, flashed again, same thing. Everything I tried, it would not get pass the initial boot screen, and just cycles the reboot again. Oh by the way, the hard resets and re-flashes are all successful with no errors.
Anyone have a solution to this? Thanks!
Click to expand...
Click to collapse
Try flashing another ROM or try putting in another battery and see if the bootloop issue goes away. Kindly update the status of your post if you fixed the issue or are still having problems.
I messed up and I know why, but keep getting stuck on the boot screen and having it freeze. I have a Radio Image on my USB Drive, so I can't go in through HBoot to use recovery since it Auto Updates (or I can decline and have to reboot anyway). If I take out the SD I can get into HBoot, but even if I hit Factory Reset, I'm still stuck on the current ROM I'm using.
If I get an adapter so I can plug my SD Card directly into my USB Drive, go in, delete the radio file, it should work right?
EchoX860 said:
I messed up and I know why, but keep getting stuck on the boot screen and having it freeze. I have a Radio Image on my USB Drive, so I can't go in through HBoot to use recovery since it Auto Updates (or I can decline and have to reboot anyway). If I take out the SD I can get into HBoot, but even if I hit Factory Reset, I'm still stuck on the current ROM I'm using.
If I get an adapter so I can plug my SD Card directly into my USB Drive, go in, delete the radio file, it should work right?
Click to expand...
Click to collapse
what phone are you using?....post in phone specific forum.. som1 will surely help you
jags_the1 said:
what phone are you using?....post in phone specific forum.. som1 will surely help you
Click to expand...
Click to collapse
Agreed. Smarter choice.
Sent from my HTC Vision using XDA App
Hey everyone. So everything was good for the last couple of days as I was on JellyBAM 6.6.0 evita. This morning after charging my phone I go to open it, view some websites etc. Phone reboots by itself, goes to lockscreen. I try unlocking my lockscreen everything good for about 10 seconds. Try to open facebook up, and boom phone goes black and will not turn on. I know for a fact that is 100% charged as when I woke up I checked the battery as I usually do to see if it charged or not.
I am pretty sure I am on Hboot 1.09 or less as I bought the phone close to the release date. Any thoughts because its weird how I cant turn even turn it on or have a LED light show up when it charges.
Thanks in advance
EDIT: Ok somehow my phone just turned on by itself and I took the opportunity to go into TWRP. Tried restoring but to a previous backup. Became stuck in boot screen. Went back into twrp tried to wipe the system and factory reset but somehow it says failed and that its not able to mount storage or anything. All of my data is gone now for some reason and it says no OS is installed. Do I have to RUU back again?
have you tried getting into bootloader by holding volume down and power? or a hard reset by holding power button for like 30 seconds
Sent from my HTC One X using xda premium
NerdFurgison said:
have you tried getting into bootloader by holding volume down and power? or a hard reset by holding power button for like 30 seconds
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Yeah I forgot to mention I have tried getting into bootloader using the volume down + power process along with holding the power button. Nothing is working.
This phone has well-known power management issues. Sometimes the battery stats get corrupted and the phone thinks the battery is dead when it isn't. Unfortunately, this sometimes results in a brick.
Plug into your PC and see what pops up in Device Manager. If you get QHUSB_DLOAD, you've been bricked. However, this may be fixable since you're on 1.09.
Ok somehow my phone just turned on by itself and I took the opportunity to go into TWRP. Tried restoring but to a previous backup. Became stuck in boot screen. Went back into twrp tried to wipe the system and factory reset but somehow it says failed and that its not able to mount storage or anything. All of my data is gone now for some reason and it says no OS is installed. Do I have to RUU back again?
Additionally, under device manager it comes up as unknown. I am going to install the ADB drivers for Windows 8 and see if that does anything
Zobabe said:
Ok somehow my phone just turned on by itself and I took the opportunity to go into TWRP. Tried restoring but to a previous backup. Became stuck in boot screen. Went back into twrp tried to wipe the system and factory reset but somehow it says failed and that its not able to mount storage or anything. All of my data is gone now for some reason and it says no OS is installed. Do I have to RUU back again?
Additionally, under device manager it comes up as unknown. I am going to install the ADB drivers for Windows 8 and see if that does anything
Click to expand...
Click to collapse
Well, wiping /system and factory reset means the OS is erased. Could be the sdcard got corrupted. You'll need to reformat it.
Good news is you're not bricked; its just a matter of getting the software in order.
iElvis said:
Well, wiping /system and factory reset means the OS is erased. Could be the sdcard got corrupted. You'll need to reformat it.
Good news is you're not bricked; its just a matter of getting the software in order.
Click to expand...
Click to collapse
Ok so should I follow like this.
Download HTC drivers
Download 1.71 RUU
Done?
Because right now my computer does not recognize my phone. Installing the htc sync and the drivers hasnt made my computer (windows 8) to recognize my phone.
Zobabe said:
Ok so should I follow like this.
Download HTC drivers
Download 1.71 RUU
Done?
Because right now my computer does not recognize my phone. Installing the htc sync and the drivers hasnt made my computer (windows 8) to recognize my phone.
Click to expand...
Click to collapse
Did you try formatting in twrp? Ruu'ing might be overkill here. Can adb see the phone even if windows can't?
Zobabe said:
Ok so should I follow like this.
Download HTC drivers
Download 1.71 RUU
Done?
Because right now my computer does not recognize my phone. Installing the htc sync and the drivers hasnt made my computer (windows 8) to recognize my phone.
Click to expand...
Click to collapse
I had a similar problem last night with a "missing" SDcard in TWRP. Thankfully, I found a utility that you can run through fastboot that will restore the SDcard without ruu.
HOWEVER...that utility and website link that I found it on are on my computer at home...and I'm not at home
Although, I did find the utility through a google search.
Let me know if you find it. If not - I'll find the link when I get home.
iElvis said:
Did you try formatting in twrp? Ruu'ing might be overkill here. Can adb see the phone even if windows can't?
Click to expand...
Click to collapse
I am having trouble downloading ADB drivers atm. Trying to find an article that explains it. Kind of a noob at this type of stuff. As for formatting, I dont see an option in TWRP.
razorc03 said:
I had a similar problem last night with a "missing" SDcard in TWRP. Thankfully, I found a utility that you can run through fastboot that will restore the SDcard without ruu.
HOWEVER...that utility and website link that I found it on are on my computer at home...and I'm not at home
Although, I did find the utility through a google search.
Let me know if you find it. If not - I'll find the link when I get home.
Click to expand...
Click to collapse
If you could please link it to me, it would be greatly appreciated. Thanks
I dont know if this matters but I factory resetted from bootloader in the beginning after I was able to turn on my phone. Maybe everything got wiped because I did that?
Does anyone know how I can get windows to recognize my phone because I have looked at several guides on google and nothing is working for me.
Thanks
Zobabe said:
If you could please link it to me, it would be greatly appreciated. Thanks
Click to expand...
Click to collapse
Here is that link I was telling you about.
Follow the instructions in the cmd. There should be only two steps.
Good luck!
http://forums.team-nocturnal.com/sh...ountable-internal-storage-on-the-HTC-One-X-XL
razorc03 said:
Here is that link I was telling you about.
Follow the instructions in the cmd. There should be only two steps.
Good luck!
http://forums.team-nocturnal.com/sh...ountable-internal-storage-on-the-HTC-One-X-XL
Click to expand...
Click to collapse
in order to this though, my computer has to be able to recognize my htc one x. I cant even get it to recognize. any tips?
Zobabe said:
I dont know if this matters but I factory resetted from bootloader in the beginning after I was able to turn on my phone. Maybe everything got wiped because I did that?
Does anyone know how I can get windows to recognize my phone because I have looked at several guides on google and nothing is working for me.
Thanks
Click to expand...
Click to collapse
yea, factory reset in bootloader is bad. never do it again unless you are completely stock.
DvineLord said:
yea, factory reset in bootloader is bad. never do it again unless you are completely stock.
Click to expand...
Click to collapse
haha yeah I realized that once I did it and read it in the sticky in the android development section. Do you have any idea of how I could get windows 8 to recognize my htc one x?
windows 8 is the last thing in the world i would let touch my computer. windows xp for life.
i heard alot of people having issues with win8 and usb 3.0 ports.