i finally rooted my inspire today, and been experimenting with the desire hd roms. Android Revolution HD seems to be my favorite so far, but multiple roms say they have overclock upto 1.22 gig or higher and that u have to enable with setcpu. Every rom i try when i load up setcpu the max i can scale up to is 1024 mhz max and not 1244 or whatever. I tried using No Frills cpu control app aswell with the same problem, am i doing something wrong? Or do i just have to wait until a overclock inspire kernel gets released?
This is because overclocking is done at the kernel level and we have no kernels that support overclocking yet. Until we do we are only able to run at 1024
Sent from my Desire HD using Tapatalk
Ok that makes sense, there is a bunch of oc kernels for desire hd but id figure that would mess things up with the inspire kernel
Sent from my Inspire 4G using XDA App
Yeah I wouldn't flash one of those kernels. It will not turn out good.
Sent from my Desire HD using Tapatalk
Related
I can't seemed to overclock over 1000 ghz. Am I missing anything?
Sent from my LG-P999 using XDA App
moshe22 said:
I can't seemed to overclock over 1000 ghz. Am I missing anything?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
You have to have a kernel that allows overclocking.
moshe22 said:
I can't seemed to overclock over 1000 ghz. Am I missing anything?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Are you using a custom kernel??
If you are use pimp my cpu to oc
G2X
Also, in case you didnt know.. Kernels may state 1.5Ghz and such but that doesnt mean YOUR phone will be able to go that high. Every device is different so every device's has a different max frequency.
Set CPU currently doesn't work with out kernels. You must install one of the OC/UV kernels from the development section and use the pimp my cpu app to overclock
Sent from my LG-P999 using XDA App
Ok, that makes sense I'm using the EB 1.04F trinity kernel +48 and was using pimp my cpu and I can overclock just fine there but I wanted to try out setcpu out.
I have it over clocked @ 1.2 -50 in all frequencies and scheduler is the default one. Force Min Frequency is checked as well.
Thanks
Sent from my LG-P999 using XDA App
On a side note, my g2x has been highly unstable after leaving it sit while using pimp my cpu. However, I created a .txt file with clock frequencies and I was able to use setcpu with little to no side effects. But after all, what is ocing even good for? Benchmarks... Mt4g, n1, g1, mt3g, hd2. Tried ocing on all of them and didn't see a noticeable day to day difference compared to stock frequency...
Sent from my LG-P999 using XDA App
crx4xharder said:
On a side note, my g2x has been highly unstable after leaving it sit while using pimp my cpu. However, I created a .txt file with clock frequencies and I was able to use setcpu with little to no side effects. But after all, what is ocing even good for? Benchmarks... Mt4g, n1, g1, mt3g, hd2. Tried ocing on all of them and didn't see a noticeable day to day difference compared to stock frequency...
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Over clock is good for overall performance.
Sent from my LG-P999 using XDA App
crx4xharder said:
On a side note, my g2x has been highly unstable after leaving it sit while using pimp my cpu. However, I created a .txt file with clock frequencies and I was able to use setcpu with little to no side effects. But after all, what is ocing even good for? Benchmarks... Mt4g, n1, g1, mt3g, hd2. Tried ocing on all of them and didn't see a noticeable day to day difference compared to stock frequency...
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
On the mt4g I was able to play dungeon defenders OCed at 1.5 without much lag. Without it the game was almost unplayable because it would lag like crazy when the graphics got too intense. But on the downside it sucked my battery dry within hours
Sent from my Xoom using XDA Premium App
First question:
I'm using no-frills CPU to Overclock. I have HTC inspire 4g running coredroid 6.6 what would be a good starting point for my
Min. Clock freq? And my max clock freq? And also what do the freq's do? Help please trying to get the most out.
Also if someone would explain what the governers are....
Smartass
Interactive
Conservative
Userspace
Ondemand
Performance
Help please
Second question:
How do I properly flash a kernel. Currently using coredroid 6.6 and wanting to flash the new leedroid kerbel. What is the propper way to do so?
Sent from my Desire HD using XDA App
Sent from my Desire HD using XDA App
yatyas2141 said:
First question:
I'm using no-frills CPU to Overclock. I have HTC inspire 4g running coredroid 6.6 what would be a good starting point for my
Min. Clock freq? And my max clock freq? And also what do the freq's do? Help please trying to get the most out.
Also if someone would explain what the governers are....
Smartass
Interactive
Conservative
Userspace
Ondemand
Performance
Help please
Second question:
How do I properly flash a kernel. Currently using coredroid 6.6 and wanting to flash the new leedroid kerbel. What is the propper way to do so?
Sent from my Desire HD using XDA App
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
If you download the kernel listed in my sig, then you can flash it via Clockwork Recovery. As far as the governers, I'm not too familiar with them myself, but here is a little info about some of them. I believe Smartass is a little newer or made for specific kernels, so there doesn't seem to be much info on that one.
Pretty much trial and error and see what one works best for you. With LeeDroid's latest kernel, SetCPU lets you go as high as 1800Mhz or so, and I had it set to that as max, with 500Mhz (or whatever setting was closest to it), but just lowered my OC a bit to a little over 1000Mhz to try and get some more battery life out of it.
Okay thank you very much. Nobody got back to me last night. I had leedroid new kernel an i flashed it, and I noticed a HUGE difference in how fast it was.
When downloading new ROMS like some say data+++, aosp, an so on.... What does all that mean? I'm very new to all this but slowly catching on.
Also I don't have set CPU, you have to buy it... I have no frills CPU
Sent from my Desire HD using XDA App
yatyas2141 said:
Okay thank you very much. Nobody got back to me last night. I had leedroid new kernel an i flashed it, and I noticed a HUGE difference in how fast it was.
When downloading new ROMS like some say data+++, aosp, an so on.... What does all that mean? I'm very new to all this but slowly catching on.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Even though I've been rooting since my Captivate in August of last year, I'm still a newbie as well. All I can suggest is: Read, Read, and Read some more. That is how I learned a lot, asking questions only when I had exhausted my search- fu.
A lot of the times the answer you need has been answered by someone in some thread.
I have cyanogenmod 7 rom installed along with leedroid kernel and one of the two has an overclock kernel, i use setcpu to overclock up to 1.7ghz. i use cpu gauge to monitor the core clocks, but no matter what i have the cpu clocked at the cpu gauge always says core 2 is offline, i have used other CPU monitoring apps also and they always say the same thing. Why is the second core not working?
Sent from my Sensation using XDA App
I think system tuner is the only one that's able to read second core performance. Could be wrong though. Also, isn't the LeeDROiD kernel for Sense ROMs? Why don't you put something like Bricked's AOSP kernel in there instead? Might help ya out.
Hey thanks alot, ill give it a try.I only used leedroid because it was the first one that has worked for getting rid of all the bloat. Ill try the bricked though
Sent from my Sensation using XDA App
I'm on insertcoin 4.6.1. With sebestians kernel and I'm using setcpu to 1.6 MHz and I read it turns on both cores, will running both damage my phone?
Sent from my HTC Sensation 4G using xda premium
Don't think so, will most likely just drain power quicker.
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Running both cores would heat the phone up even more since you're running two cores. Also our cores are asynchronous so it isn't in their "nature" to run simultaneously. So I wouldn't recommend it.
Sent from my HTC Sensation XE with Beats Audio using XDA App
setcpu does run both cores. I noticed when i flashed a new higher kernel and im running full max on cpu my phone over heats. I also did a benchmark test on max and it resetted my sensation. When i set the kernel cpu lower other than max not only did i get better test results but i had no reboots or lags on the rom.. and thats on setcpu
I agree its unnecessary. I get a bunch of fc's then reboots start as my cpu overheats and cuts out.
So what cpu tool do you recommend? I'm also using SetCpu.
Waszker said:
So what cpu tool do you recommend? I'm also using SetCpu.
Click to expand...
Click to collapse
System Tuner Pro. I've found this the only tool that makes boot settings stick when running ics.
I agree. I use Rom toolbox myself with sdbooster and. I set my CPU on Rom and boost my sd card up. Play around with it and do some antutu benchmarks..good luck.
Sent from my FUNZY Sensation 4G with Beats Audio using Tapatalk
Also, you're running ICS, which is optimised for dual core performance, so leaving our cores the way it is should, be just fine.
Hello,everyone....recently I overclock my desire s and thanks to many of you I received many useful information so I want to share impression how overclocking has improved performance and battery to help other like us to know what and how to use overclocking and governor....
So I start ....
I use Viper saga with tweaked kernel 3.x/ondemand with deadline/cpu min.245-max.1410
I noticed that my graphic is very good and everything works like a charm....for example in FIFA12 I noticed that even the shadow of all player are so intense and everything is so clear,it seems that improves my graphic and my phone is faster..I hope that overclocking to 1410 to not damaged my phone.So what configuration do you have ?
Sent from my HTC Desire S using xda premium
Set the governor to performance. Battery eater though. But u only can choose better battery life or smoother graphics, so make up ur mind and choose one :thumbup:
When playing with overclocking unstick 'set on boot'. So that it goes back to normal once reboot in case of any freeze. Overclock it based on ur desired value, experiment with it, slowly. increase the value step by step. Leave it for a day then increase again. If it freezes then u know ur phone's limit.
Sent theDesiredS
i have read that people say it's stable up to 1.5 GHz.
I have set mine to 1.3GHz to be on the safe side.
And set it to,on demand,so it only takes up more when it needs to.
setting it up to high speeds can result in a melt down,draining batteries and will shorten out the life of your phone even when stable for a couple of days so be aware of what your doing...
there is no best value for everyone, some say 1ghz is enough, some say 1.5 ghz is not enough.
so it depends on what you need, its a trial and error thing
u will get a fast response phone but battery life is sucs ... cant complain though
LOL? :what: how many threads must u made to ask a question? answer can be found here http://forum.xda-developers.com/showthread.php?t=2092673:D
why not just continue on your thread?
Sent from my supercharged tank
Right now I'm using PACman v19.3 and I can get up to 1.8ghz no lag but battery life can sometimes get a little bit bar but works like a dream on games
Sent from my HTC Desire S running ViperSAGA v1.1.0 Full Sense 4.1
king of disaster said:
i have read that people say it's stable up to 1.5 GHz.
I have set mine to 1.3GHz to be on the safe side.
And set it to,on demand,so it only takes up more when it needs to.
setting it up to high speeds can result in a melt down,draining batteries and will shorten out the life of your phone even when stable for a couple of days so be aware of what your doing...
Click to expand...
Click to collapse
How do you managed to set to 1,3Ghz?I have CPUset and I don't have the value 1,3 Ghz....
Sent from my HTC Desire S using xda premium
ifti786 said:
Right now I'm using PACman v19.3 and I can get up to 1.8ghz no lag but battery life can sometimes get a little bit bar but works like a dream on games
Sent from my HTC Desire S running ViperSAGA v1.1.0 Full Sense 4.1
Click to expand...
Click to collapse
What kernel you have?
Sent from my HTC Desire S using xda premium
Never a good idea to overclock CPU more than 1.5 GHZ . That is the maximum stable frequency for our processor.
I use my phone at 1.2 GHZ.
Tapatalked from Desire S running Andromadus
What is the best application for overclock?
for example when I play a game to switch automatically to my desire frequency and governor?Now I have Cpu master but unfortunately i don't have more option for profile ....and is it possible to set frequency to 1300Mhz ?
Sent from my HTC Desire S using xda premium
AW: Best overclock value
petrevirgil said:
What is the best application for overclock?
for example when I play a game to switch automatically to my desire frequency and governor?Now I have Cpu master but unfortunately i don't have more option for profile ....and is it possible to set frequency to 1300Mhz ?
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
If you want separate screen on/screen off profiles, I would recommend daemon controller app (with andrev_oc installed through the app).
If you want more profiles for different situations, setcpu is probably the only real option.
Setting to 1.3 GHz depends on the kernel you're using, not on the app.
teadrinker said:
If you want separate screen on/screen off profiles, I would recommend daemon controller app (with andrev_oc installed through the app).
If you want more profiles for different situations, setcpu is probably the only real option.
Setting to 1.3 GHz depends on the kernel you're using, not on the app.
Click to expand...
Click to collapse
I use tweaked kernel 3.x but i dont have the option to set to 1300....I have all value from 245 to 1495 but 1300is missing...
Sent from my HTC Desire S using xda premium
petrevirgil said:
Hello,everyone....recently I overclock my desire s and thanks to many of you I received many useful information so I want to share impression how overclocking has improved performance and battery to help other like us to know what and how to use overclocking and governor....
So I start ....
I use Viper saga with tweaked kernel 3.x/ondemand with deadline/cpu min.245-max.1410
I noticed that my graphic is very good and everything works like a charm....for example in FIFA12 I noticed that even the shadow of all player are so intense and everything is so clear,it seems that improves my graphic and my phone is faster..I hope that overclocking to 1410 to not damaged my phone.So what configuration do you have ?
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
I think the stable is 1,2~1,3GHz, but u can overclock it up to 1,5ghz but it eats your battery... so be careful!
dave3002 said:
I think the stable is 1,2~1,3GHz, but u can overclock it up to 1,5ghz but it eats your battery... so be careful!
Click to expand...
Click to collapse
Thanks but how can I set to 1300?....I don't have that value in setCPU....
Sent from my HTC Desire S using xda premium