[Q] Sennheiser MM 450 TRAVEL with galaxy? - Galaxy S I9000 Accessories

Hi,
I'm thinking about buying the MM 450 travel sennheiser bluetooth headphones (with microphone):
edit (I can not post external links yet):
sennheiser.com/sennheiser/home_en.nsf/root/private_headphones_travel-line_502891
Is anyone using them with the galaxy? Are they happy using them?
I am curious about the level of integration with the galaxy. I have read is various reviews that the headphones export two bluetooth modes, one for music (high quality) and one for conferencing (less quality but you can use the mic). Is that true? Can you listen to music and automatically answer a telephone call without changing the bluetooth connection?
Regards,

Related

Advice needed on Bluetooth music to Hi-Fi.

Hi,
I have a HTC Touch which I am currently using the Pocket Player software to stream my music from my PC which is located upstairs. I can connect the Touch to my Stereo amplifier through a USB/Jack cable and play the music through my Hifi speakers rather than headphones but I was wondering if it would be possible for me to transmit the audio to my amplifier by way of Bluetooth. It would cerntainly allow me the freedom of changing tracks on my phone sitting in my armchair rather than sat next to my amplifier through a cable. I.E Streaming music from my PC through Wi-FI, via my HTC Touch through bluetooth.
Hope this makes sense. Has anyone done it and is there a noticible difference in sound quality when sending music by bluetooth rather than a wired connection.
I have seen various Bluetooth type devices on ebay and amazon that claim to do this type of thing but as I have never tried Bluetooth I am a little sceptical and not sure exactly what is required. I assume that as my Touch can send Bluetooth beam I would only need a reciever to connect the Jack plug from my amp, is this correct? Or would it be better to buy a jack transmitter/receiver for the job.
I don't want to spend a whole lot of money doing this just to test so can anyone recomend a device.
Thanks in advance for any help.
hi there,
i use this device:
http://www.itechdynamic.com/en/products_spec.asp?cid=6&pid=06020 it's by itech and it's called bluecon35. the picture shows the black unit but i have the white one =) the 3.5mm jack is connected to the aux plug of my amplifier. my stereo system combined with the speakers are then also connected. from there, the bluecon is paired via bluetooth to my x7500. this gives me the luxury of changing track, albums, volume, etc. basically all the music is streamed to my amplifier via the bluecon. with regards to the quality, i would say it's quite good. i don't hear "noise" or static in the background...nor are there jumps or pauses in the connection. everything is just fine except that i'm using a much better set of speakers as compared to headphones.
disadvantages:
- if you listen to your sounds like for 8 hours, then you could have a problem. the battery life of bluecon is around and doesn't have an external power source that allows it to play even when paired. i read that itech is planning to come out with a new similar bt device but this time it's also plugged to the wall socket or a car charger. no idea when that will be
- a minor detail is that if you receive a call, an sms or your phone has an alarm for an event then these sounds are streamed into the amplifier as well.
cost? i got it from thailand and it was for 2000 baht....that's around 63 usd (based on a 32baht to dollar exchange rate).
hope that helps
I use a pinnacle soundbridge, which cost under £50, and it plugs into your hi-fi and streams music from your pc over your wireless network. It can be controlled using the ir remote control, or your pda can access it over wi-fi to control it. As well as streaming from you pc, you can also use it to listen to internet radio.
Thanks for the advice guys. Robson, the Bluetooth receiver is a possibility however after googling it I found a couple of bad reviews. Some people seem to have a problem connecting their devices to it and others have said it has trouble with streaming MP3's over 192kbps. I will look into this further.
Jez83uk, the Pinnacle Soundbridge looks like a really good idea. Is it differcult to set up with a PDA and will it connect to my PC through a wireless router.
Also were would you recomend picking one up for under £50.
Cheers for all the help!
Mine was £39.99 at ebuyer.com, but looking around a few websites they seem to be out of stock everywhere, google products. I recommend keeping an eye on ebay if you're interested in getting one. I have mine connected through a wireless router, and setup was extremely easy. You need to run a media server- I use firefly, but I believe that itunes or windows media player 11 can do the same thing. PDA control is just a case of installing two cab files for a package called visualmr. Hope this helps you.
belkin tunestage 1 here
...was originally only advertised as working with the supplied dongle for earlier ipods, which is how i used to use it, but i discovered it works great with A2DP too. should be v cheap on ebay...

Stereo Bluetooth Problem

Hi, I have a Palm Treo 750 and an original jawbone bluetooth headset. I was wondering if there's a way for me to play music through my bluetooth headset? Thanks!
i highly doubt it, those types of bluetooth earpieces are designed specifically for talking and as far as i know do not support stereo sound.
if you want to listen to music through bluetooth headphones you have to go out and purchase a pair of MotorROKR S9 headphones
http://direct.motorola.com/hellomoto/s9/
i own a pair and they are wicked for listening to music, although i'm not a fan of the earbud types of headphones and if you don't have the right sized head they wont fit properly, however they do support stereo sound for music. another point about them, they suck for taking phone calls and talking with them, they pick up way too much background noise, i only use them for music.
The only other alternative would be the logitech type, which i believe are more expensive but same idea. and they're not earbuds which appeals to me, i only bought the motorola type cuz they had been reduced to half as much as i remembered them being when i used to work for best buy lol.
these are the logitech alternative (never used them so i don't know what they're like although i imagine they kick ass for listening to music)
http://www.logitech.com/index.cfm/speakers_audio/headphones/devices/212&cl=US,EN
Looking at the product info on the site, these do come with an adapter for any other music device with a jack plug-in that doesn't have built in bluetooth.

Headphones with working previous/next/volume buttons

Are there any good in-ear headphones with working previous/next buttons to control next/previous track and volume in any music player?
Hi well I've been using the Altec Lansing BackBeat 903 Bluetooth Headset for about 3 months now and that has all the features your looking for plus they sound damn good as well.
I use the stock headphones with winamp, and double tap the pause button and it skips to the next track
But for a real solution with back.. you could get one of the little reciever thingies with a 3.5 jack, so you get wireless + controls + any headphone you like ^_^. But there could be some quality loss if its cheap..
Motorola's s9-HD also have theses foncions enabled.
Thanks for the replies. Those two seem to be ear-hugging types, are there any with regular design?
the best would be to use the Nokia remotes that came with the n95 and others. But apparently it doesn't work since the layout inside the jack are not the same between Samsung and Nokia... too bad
I have a question about this topic, I tried to use the apple in-ear headphones with the mic and the volume buttons on my SGS but when i fully plug it into the jack, theres no sound.... but if i leave it out abit then it works fine.... Do u guys know what is going on?
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
PhoenixFx said:
But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
Could you please tell me is this possible with bluetooth clips:
I connect wired headphones to SGS directly (not to the bluetooth clip 3.5mm hole), pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons. When the call comes I hear it in headphones and start-stop player or push call answer button on bluetooth clip. After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic. After call is ended I can start-stop playing music again by bluetooth buttons. This is 100% tested or it's is appeared to be working? Thanks.
baribalbear said:
Could you please tell me is this possible with bluetooth clips:
Click to expand...
Click to collapse
I don't think it works like that, but I have to check to confirm.
baribalbear said:
pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons.
Click to expand...
Click to collapse
When you are not using BT audio, I doubt the player will respond to BT player controls.
baribalbear said:
After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic.
Click to expand...
Click to collapse
I dont think you can split the mic and headset function like that, either you use the BT for both mic and headphone or not at all. (unless someone modifies the driver). But again, something I have to check to confirm.
For basic call and volume controls something like this might work.
Here is another alternative, but no mic (not released yet either).
PhoenixFx said:
Here is what I use (Motorola S605):
Click to expand...
Click to collapse
Very helpful, purchasing from ebay as we speak, im sick of not being able to switch song whilst cycling...
Just a question really, do you just use the standard samsung music player?
PhoenixFx said:
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
I like these, thanks.
How does this things work? Do you plug anything to the usb port or do you just enable blutooth and play? Also can you use previous/next buttons while the screen is locked? Can you do these with the default player or do you need anything like WidgetLocker and add the player to the lock screen?
Also are there any wired versions of these?

[Q] Audio to non A2DP headset

Hi,
I'm wondering if there is any way to stream audio music and/or FM radio from Windows Phone 7 (I have the HTC HD7) to a non A2DP Bluetooth headset (I have the Jabra EasyGO).
It seems that I can only make and receive calls with it.
I've searched all over the place (and web) and cannot find a way to do that.
The only way is to get a new Bluetooth headset with A2DP capability?
Is there is a workaround, please let me know.
Thanks.
I don't know of one. As far as I know, the Headset profile is mono-channel only (plus another channel for the mic) anyhow, and probably quite low bandwidth, so it would likely sound awful.
Thanks for your answer GoodDayToDie.
But I don't mind for quality... Actually I'm not interested to listen for audio.
I just want, for example, to hear drive directions when I'm driving using navigation software (Navigon) instead of hearing from the loudspeaker.
Hmm... I thought the phone *would* use Headset profile for driving directions. Weird. I find the WP7 implementation to be so bad that I prefer to keep using a 4-year-old Garmin Nuvi instead, but I could have sworn I tested it and it came over the BT (and my car only has Headset, not A2DP). Maybe poke around in Settings?
Alternatively, if your car has Aux In, you could use a ripping cable (double-ended headphone cord, they're very cheap) and then the phone will play instructions over the cable into the car's stereo. This is also a great way to use the phone's music player, including Zune Pass if you have it, to play music in the car (I do this all the time). It uses less battery than having Bluetooth transmitting constantly would anyhow.

Recommend an A2DP head unit? (High sound quality via A2DP)

Hey guys, I was wondering if any audiophiles could help me out.
I am looking to purchase a new headunit, my minimum requirements are 6channel 2.5V or greater pre-amps, built in HD-Radio, and A2DP support.
The problem I am seeing with A2DP support is that they all seem to transmit at low sound quality, have hissing, popping, skipping, clipping at low sound levels etc. I read that this is due to the standard codec being SBC, which compresses depending on processing power used. I do not know how the Atrix handles SBC, and would prefer it to directly pass my 320KB/S MP3 codec, which is a capability of A2DP, I just don't know if any manufacturers utilize it yet.
Is this technology not ready for the mainstream yet? I have a lot of 320KBPS MP3's and I would like to be able to listen to them at full volume until my speakers clip, and not suffer actual technical limitations.
I have a Motorola Atrix, as well as the car dock, so the car dock does have an easily accessible 3.5mm jack, but I was really hoping to take advantage of A2DP and maybe use built in hands free calling.
Sorry if this is a dup, tried searching and looked at similar threads, and there were none that had any legitimate answers.

Categories

Resources