I am getting nonstop "the process android.process.acore has stopped unexpectedly," and wanted to take the opportunity to start over with a new ROM. I have CWM installed, which should help, but I am trying to drop the new ROM zip to the internal memory via a USB connection with my computer to no avail. Previously the computer recognized the internal memory just fine - now nothing. Any suggestions for how to proceed? I'd gladly wipe the Vegan ROM off and start from scratch, but I am not having any luck there either.
I think that in CWM, there's a mount USB, and you have to do that.
Jim
Do a recovery from a good back up reboot and try again...
Related
While trying to flash a new ROM I think I may have unplugged the USB cable with the tablet still mounted to a laptop. I now can't seem to access that storage space in any way and am in turn unable to flash any ROM. I don't like the TnT and am trying to flash a ROM without it. Any ideas how to proceed?
Thanks in advance!
does it boot up at least? may be able to factory reset and start over. or even power+VOLUMEUP to try to recovery boot.
i just put on tntlite 2.0. it's super fast. doesn't use a computer. it just strips the stock OS
It does still boot but tablet storage is not accessible. When trying to get into recovery,i get a triangle then it boots normal. Not sure what else to try. Tried mounting in windows and linux to format our repair..no luck!
sounds like the storage partition is corrupted and it crashes when it tries to read it, expecially if you unplugged the cable mid-flash (ouch!)
clockwork mod should let you reformat and partition the internal storage, goodluck, hopefully it's not a low-level problem w/ the storage data structure, ya never know if you were flashing it when it crashed, depends on what mode it was using to flash data to the disk (normal write vs low-level format equiv)
Thanks KM....just to follow up on this thread...I had to return the tab to sears....I exchanged it for a new one and have put TnT lite 2.0 on it. I'm not all that happy and plan to try zpad as it seems like a smoother and faster responding ROM.
I just updated several things on my Sensation. First, I updated from Energy Oct 18 to Energy Oct 22 ROM; second, I updated from Stock Kernel to Bricked v1.4; third, I updated from CWMR 4.0.1.4 to CWMR 5.0.2.0.
Everything is working fine, except for the fact that I can't figure out how to mount my SD Card when connected to my computer via USB right now. After rebooting after updating CWMR, I wanted to install Amaze camera v7.
I can't figure out why I can't mount the disk drive because I didn't change any settings. I have USB debugging enabled, and even in "connect to pc" when I set the default connection type to "disk drive" nothing happens. I also tried unplugging the USB cable and plugging it back in, but I still can't get the phone to bring up the prompt asking how I want to connect (and before you ask, I have it set to "ask me about USB connection type whenever I connect my phone to a PC). What do you guys think the problem is? Is it CWMR 5.0.2.0? If it is, I'll gladly change over to that EXT4 Recovery.
Remove you sd card and return it back to the phone.
It sounds like a problem with the SD card. As said above, try removing it and reinserting it.
Or if you have an SD carrier for it, try using that to read it in another reader and format it.
I have a Captivate that was rooted and working for over 6 months, and suddenly went into a black screen giving error on E:\.....
Have tried to install the stock firmware using ODIN in Download mode I897UCJF6-final-OCD-REV0 and I897UCKJ3_withBL and both are a success, but as soon as I reboot the phone i get the AT&T logo, see the Samsung logo and then the screen turns black and I can't even see the phone on USB
Also tried loading the Pinnacle_Flasher and I can see the CW recovery menu, but after that point I'm unable to flash an update.zip (Pinnacle_1.2.zip renamed as update.zip on root of ext SD card) from the external SD, and am unable to copy it to the internal SD Card. Connecting the phone to the PC says the USB drive needs to be formated.
Appreciate if anyone can help in recommending any other steps I can take to unbrick the phone
Using a Win 7 32 PC
Thanks
batrad said:
I have a Captivate that was rooted and working for over 6 months, and suddenly went into a black screen giving error on E:\.....
Have tried to install the stock firmware using ODIN in Download mode I897UCJF6-final-OCD-REV0 and I897UCKJ3_withBL and both are a success, but as soon as I reboot the phone i get the AT&T logo, see the Samsung logo and then the screen turns black and I can't even see the phone on USB
Also tried loading the Pinnacle_Flasher and I can see the CW recovery menu, but after that point I'm unable to flash an update.zip (Pinnacle_1.2.zip renamed as update.zip on root of ext SD card) from the external SD, and am unable to copy it to the internal SD Card. Connecting the phone to the PC says the USB drive needs to be formated.
Appreciate if anyone can help in recommending any other steps I can take to unbrick the phone
Using a Win 7 32 PC
Thanks
Click to expand...
Click to collapse
It could be something is corrupt on your internal SD card. Have you tried enetering clockwork mod and mounting USB storage and then hook it up to your computer and reformatting it
Currently Fusionized
Wdustin1 said:
It could be something is corrupt on your internal SD card. Have you tried enetering clockwork mod and mounting USB storage and then hook it up to your computer and reformatting it
Currently Fusionized
Click to expand...
Click to collapse
When I run clockwork mod and try to format the media it fails it works
when i connect to the PC and try to access the folder, it fails, saying i need to format the media, and when i try to format from the PC, it fails...
thanks
batrad said:
I have a Captivate that was rooted and working for over 6 months, and suddenly went into a black screen giving error on E:\.....
Have tried to install the stock firmware using ODIN in Download mode I897UCJF6-final-OCD-REV0 and I897UCKJ3_withBL and both are a success, but as soon as I reboot the phone i get the AT&T logo, see the Samsung logo and then the screen turns black and I can't even see the phone on USB
Also tried loading the Pinnacle_Flasher and I can see the CW recovery menu, but after that point I'm unable to flash an update.zip (Pinnacle_1.2.zip renamed as update.zip on root of ext SD card) from the external SD, and am unable to copy it to the internal SD Card. Connecting the phone to the PC says the USB drive needs to be formated.
Appreciate if anyone can help in recommending any other steps I can take to unbrick the phone
Using a Win 7 32 PC
Thanks
Click to expand...
Click to collapse
What was the last thing you did? Install an app, browsing internet.........?
chappatti said:
What was the last thing you did? Install an app, browsing internet.........?
Click to expand...
Click to collapse
updated apps from the marketplace..
Did you actually name it update.zip, or just update?
i had the same issue. trying to look for the posts i made about it. i remember something along the lines of flashing to an old boot loader and an old kernel with cwm then doing all my wipes then doing a master clear via odin then via cwm again then tried flashing to stock. im probably neglecting one of my steps though.
oh and make sure you let it charge via wall plug for at least a half hour before you try anything.
I wiped and cleared everything (cache, SD Card...) from the settings in order to install the new Ice Cream rom which I got working but then wanted to clean everything up. So obviously after doing the formats, it also wiped the zip (icecream). I can access clock work recovery, but it doesn't recognize my USB at all, same machine and cable is fine. I am trying to do it as a USB Mass Storage device but still it cannot recognize it. Any help would me much appreciated.
namsu55 said:
I wiped and cleared everything (cache, SD Card...) from the settings in order to install the new Ice Cream rom which I got working but then wanted to clean everything up. So obviously after doing the formats, it also wiped the zip (icecream). I can access clock work recovery, but it doesn't recognize my USB at all, same machine and cable is fine. I am trying to do it as a USB Mass Storage device but still it cannot recognize it. Any help would me much appreciated.
Click to expand...
Click to collapse
I'm not sure if you mean SD storage and not USB but you should have never formatted your SD storage.
In clockworkmod recovery there is an option to mount the SD storage. Make sure its mounted and then try activating the USB storage again. This should give you the ability to add a ROM zip file on the SD storage so you can flash it.
Thanks for the reply. Basically I am in clockwork recovery mode, I mount the SDCARD, then I go and select the option "mount USB storage". Sometimes I find that it finds Android 1.0 and I see the I: come up but then goes away quite quickly. But most of the time it comes up as unrecognized.
Now I have 2 cables, both which charge the phone fine. I have used one on a BlackBerry and remember it does the job of connecting as a data connection fine. Also have tried my XP laptop, same result.
My feeling is that it may possibly be the actual USB port on the phone that is the problem but I am unsure in this. It never failed to connect when the phone was working properly (in an actual OS).
You should update your CWM... 5.0.2.0 is the latest version.
But anyway, you don't need to mount SD card then mount USB storage. Only need to do the latest. Once you do this, unplug and replug the phone, the drive should pop up.
polobunny said:
You should update your CWM... 5.0.2.0 is the latest version.
But anyway, you don't need to mount SD card then mount USB storage. Only need to do the latest. Once you do this, unplug and replug the phone, the drive should pop up.
Click to expand...
Click to collapse
When I go into clock work recovery it says USB device Unrecognized. Problem is I don't have anything on the SD I have the ROM on my computer. Whether I go to the mount USB storage menu or not. Unsure what to do?
namsu55 said:
When I go into clock work recovery it says USB device Unrecognized. Problem is I don't have anything on the SD I have the ROM on my computer. Whether I go to the mount USB storage menu or not. Unsure what to do?
Click to expand...
Click to collapse
I imagine you don't have a working adb setup on your computer to update CWM, right?
Boot into CWM with phone plugged in. Go to mount USB storage. If your "SD" isn't recognized, still on that screen, unplug and replug phone. It should get detected then.
Tried this several times keep getting Unknown Device. I installed the SDK with Google Drivers. Unsure if that is the ADB set up.
namsu55 said:
Tried this several times keep getting Unknown Device. I installed the SDK with Google Drivers. Unsure if that is the ADB set up.
Click to expand...
Click to collapse
Yes that's the adb setup.
You might need to manually install the drivers for your phone, although this shouldn't impact on the SD mounting capabilities. Just to make sure, I would get a working adb setup and use fastboot to update your Clockworkmod Recovery to 5.0.2.0.
You can follow this to know how to use fastboot
http://wiki.cyanogenmod.com/wiki/Fastboot#Flash_Custom_Recovery.img
If you have trouble getting your phone to be detected and the drivers installed, I suggest you use PDAnet drivers instead (if you're under Windows). Some phones for some reason need .inf driver hacking to get detected.
http://junefabrics.com/android/
I will give this a go many thanks.
polobunny said:
Yes that's the adb setup.
You might need to manually install the drivers for your phone, although this shouldn't impact on the SD mounting capabilities. Just to make sure, I would get a working adb setup and use fastboot to update your Clockworkmod Recovery to 5.0.2.0.
You can follow this to know how to use fastboot
http://wiki.cyanogenmod.com/wiki/Fastboot#Flash_Custom_Recovery.img
If you have trouble getting your phone to be detected and the drivers installed, I suggest you use PDAnet drivers instead (if you're under Windows). Some phones for some reason need .inf driver hacking to get detected.
http://junefabrics.com/android/
Click to expand...
Click to collapse
Just to let you know, I am trying to access USB Storage from clockwork recovery since I don't have any rom on here at all.
This may sound weird but I held the USB in the phone port in an angle, luckily the removable drive came up. I got the the ROM on the SD it has installed and loading. I'll see if its an issue with the USB on the phone later on but as long as it got back up and running (Ice Cream) for now.
Anyway thanks guys much appreciated. I'll be a lot more careful next time before I go around wiping everything especially the SD LOL.
namsu55 said:
Just to let you know, I am trying to access USB Storage from clockwork recovery since I don't have any rom on here at all.
Click to expand...
Click to collapse
I gathered this much from your posts.
Edit: Glad you got it working. Make sure you get CWM updated whenever you can if you haven't done so, this could lead to problems down the road to flash different zips.
polobunny said:
I gathered this much from your posts.
Edit: Glad you got it working. Make sure you get CWM updated whenever you can if you haven't done so, this could lead to problems down the road to flash different zips.
Click to expand...
Click to collapse
I'll do that next time I get a chance, I thought my phone was gone there for sure. Thanks again.
namsu55 said:
I'll do that next time I get a chance, I thought my phone was gone there for sure. Thanks again.
Click to expand...
Click to collapse
The Nexus S is a difficult phone to brick, luckily. Most of the rooting, bootloader unlocking and flashing steps are easy to follow too.
No problem!
namsu55 said:
This may sound weird but I held the USB in the phone port in an angle, luckily the removable drive came up.
Click to expand...
Click to collapse
Sounds like you have a bad connector on your phone.
obsanity said:
Sounds like you have a bad connector on your phone.
Click to expand...
Click to collapse
Yeah I think so.
So, here's the problem - I was just using my phone normally, when it froze - no big deal, recently it has been getting slower and I was just planning on factory resetting it after I back up everything. But, when it booted and went on the start screen, it says "Scanning USB storage for problems" or something like that and it says then "Damaged USB Storage -You may have to reformat it" and unmounts my SD card, so, I have no storage altogether. When I click on the notification it asks if I want to format USB storage. I just want to know if there's a way of retrieving some files, because in my phone FIle Manager there's nothing, and when I connect it to the PC (Windows XP), it doesn't dettect any stotage, if I do it through "USB Utilities" on my phone it shows two Removable Disks on my computer, which are empty, when I click on them it just says "insert disk into drive", and if I click "Turn on USB Storage" on my phone it just keeps on trying to connect, but can't.
I tried restarting it, taking the battery out, booting without an SD card, booting into safe mode, using adb to pull some files, searched the internet for a few hours but to no avail, found this "Tenoshare Android Data Recovery" but it needs root, which I'm not, so I tried rooting it with SuperOneClick - doesn't work, tried installing super user from the recovery menu from SD card, but it can't install it - I'm wondering if it's wortht it. So, now I don't know what to do - do I root my phone using the methods here (with odin and etc) and use that utility, do I just factory reset it (maybe try recovering files after I've reset it?), or is there any other available option to somehow recover the files? I'm on Android 4.0.4 unrooted with Baseband version I9103XXLQ3 - I had installed it a few years ago (my phone came with 2.3.6 and I just followed the instructions here on updating my firmware).
I'll be very grateful with any help, I just had a few more important files and the last time I backed up was in December, so any help is appreciated