Related
Hi XDA
I am new to the Android scene but not new to hacking and moding in general. I have an Asus Transformer that I've been trying to root for over a day now with out success.
I've been following this guide since I don't want to remove the information from my tablet as I actually want to gain root to back up some applications before I continue further down the CWM and mod's path.
http://forum.xda-developers.com/showthread.php?t=1125714
I have adb setup and can access the device in apx mode, when running the batch script for root, the terminal shows that it's copying data, and I see output successful written twice on the tablet it's self, If i further continue the CWM batch script I get a 3rd successful message appear on the tablet.
I reboot the transformer and enter normal mode, and ensure debugging is actively set, and a little bumblebee icon is in the bottom status bar, I then proceed to run the root_app batch which should open up su for me.
However even though I don't receive any error messages and only successful ones, it just wont root! I've tried replacing the boot.img and recovery.img from another post on rooting, to see if this would give any success alas non was given.
I am now completely lost on what I can do next, I don't understand why this wont work for me, whilst it seems to work correctly for everyone else.
The details of the transformer as current:
Android 3.1
Kernel 2.6.36.3-00001-gf377a2b
Build hmj37.ww-epad-8.4.4.5-201105271
Dock EP101-0209
I am using windows 7 64 with drivers installed and asus sync installed.
Nvidia USB Boot-recovery driver for mobile devices
Date 31/01/2011
Version 1.1.1.0
Please can I get some direction from the XDA community on this issue since I've got over 20 tabs open in my browser looking information up and yet nothing seems to help, as stated I don't want to loose my data just yet since I really want to back up a couple of apps of importance to me, hence I am having to use this rooting method for now.
I would of posted in the above linked thread but XDA wont let me since I am a new member.
Please can someone shed some light on this for me? I am willing to rip out the boot.img from the transformer my self, and mod it given the commands and little help since I can't see what else I can do.
Bump
Can someone please move this to applicable transformer area? This thread is being viewed but not answered, and I think I need a dev to look at it
Is there anyone here who can confirm the drivers I am using for apx are ok? I did pull them from the package which is part of the guide I linked and was following.
More info
Well i've ensured that JDK and SDK are installed that all parts are updated and installed according to the adb guide, and yet still nothing...
.
Here is a sample output on the transformer after running root.bat
imageshack.us/photo/my-images/204/20110622112439.jpg
Restricting new users is actually pretty S**T i can't post in correct threads, I can't add links to images to show my outputs what a way to welcome new people!!
With regards to running the root_app.bat which gives the superuser permissions, I have debugging enabled, and I see my tablet in windows I can explore the file system and I see it listed as Transformer TF101 under portable devices.
Driver Provider Microsoft
Driver date: 21/06/2006
Driver Version 6.1.7600.16385
Could it be a problem with this driver?
Stop looking and start answering I am getting really F*** off here, I've had no sleep and i am still no further forward, 2days of hell for something that people are reporting as the fastest and easiest root ever!
What driver version do you have listed in windows when you have the tablet connected under debug mode? please at least someone help me with that answer so I can continue this dam search for a fix.
Anyone?
If you could please just confirm if your using the same drivers when having the tablet on in normal mode, and connected with debug option active.
Going to spam this now so I can link into the original guides tread.
Spam to unlock my account 1.
Spam to unlock my account 2.
Spam to unlock my account 3.
Spam to unlock my account 4. Should be unlocked so i can post in dev section.
FIXED!
Ok so i finally got pissed off with this and having a strong suspicion it was a driver level issue only I ripped all the drivers out for normal mode, with and with out debugging.
I re-installed the device and the drivers fresh from ASUS website (again) and low and behold it's working.
I believe the reason for my issue was a corrupt MTP driver, I recently did the asus sync update and that caused a number of sporadic errors! (Adobe AIR completely disappeared out my system!)
Anyway, thanks to the XDA community NOT (69 views not a single confirmation of driver version I was asking for!) I WILL help others and since I've spammed this thread enough to unlock the dev threads it's now being posted and linked there for the benefit of others!
3hours sleep 2 days of messing = pissed off but finally relived user of transformer!
Big shout to the dev's who have made the tools in the first place you're doing a great job, and I hope to assist, with guides, testing and maybe a mod or two.
I've recently bought a disgo Tablet 7900 to have a cheap tablet to play with. In overall, I am pleased with it, however I want to do the following:
Connect to an ad-hoc network using wifi
Install Android Market
For the first option, I think I need root access. I found some topics on the internet which stated Android can connect to ad-hoc wifi networks when modifying 2 files.
However, I cannot find any information on how to get root access on a disgo 7900 tablet. I've tried some "one-click rooting application" such as z4root and Universal Androot, however had no success.
The device runs on Android 2.2 (Froyo) and has 2 micro-sd slots, an ethernet port, 2x USB port, mini-HD port and a 3.5 mini-jack for headphone.
So no mini-usb for connection to a pc.
Anyone had any success on getting root access with this device? Or can point me in the right direction?
Thanks in advance!
Gustavolis said:
Anyone had any success on getting root access with this device? Or can point me in the right direction?
Click to expand...
Click to collapse
Welcome, the XDA community is about development. There are several other sites that might be able to specifically address your specific questions and issues.
Posting a message at one of the sites, noted below, more suited to user assistance will probably lead to a quicker resolution. Answers that may apply are already posted! If possible search first.
Your tablet is closely related to the Sylvania 10-inch Magni Tablet - SYTAB10MT (SYNET10LP), where on the androidtablets.net Sylvania Tablets Forum there is a detailed description of multiple root methods and the steps to add adhoc gathered from the xda-developers Android Ad-hoc support hack/wpa_supplicant - xda-developers thread.
There are three (3) forums dedicated to Technical Help for the various models of Superpad's, a similar infoTMIC powered tablet, at apad.tv Main-Forum.
The is one (1) dedicated sub-forum and one (1) Unlisted InfoTM forum in the Infotmic subforums at SlateDroid.com.
There are also the Sylvania/Disgo 6000/AIRIS and Infotmic Based discussions at androidtablets.net of which many of the issues/solutions could apply to your tablet.
As xda pulls users from all over the world, here are a few International discussions as well regarding the 10" infoTMIC powered tablets all of which have similar issues therefore the solution approach are often applicable.
There at several forums related to devices at the Russian - 4PDA
Since the tablet is also closely related the to some models of the Flytouch there are several Spanish discussions on-going at Tabletsmania
Portugal's adroidPT APAD forum has a few discssuion's of the SuperPad.
Finally, there is a post about the specific Hardware ID's "hwver" and how to match it to the appropriate InfoTMIC Update Wrap files described in infoTMIC Hardware ID's "hwver" and updates (*.ius) which provides some additional links that will get you well on your way to resolving your issue.
Good luck
Hi there
I need to reactivate this topic. I just bought a used Disgo 7900 and upgraded it to Gingerbread 2.3.3 from their website. Since this is Chineese tablet there is no Android Market and other usefull aps installed. I tryed different versions of the market apk's but none works. All do crash.
Code:
Modell: disgo7900
Android: 2.3.3
Kernel: 2.6.35.7 [email protected] #76
Build: GRI40
The problem is, that I can't get it rooted. Gingerbreak does not work. It is trying and trying for hours but without success. There is no "Development"-Menu for activation USB-Debugg - but I installed a USB-Debugg-App for activatiing it.
It seems that the device has a different bootloader. When accessing the recovery mode by pressing "home" - "back" - and "power" it starts automaticly loading a recovery image without having a chance to choose custom files.
The device seems to be similar to the so called Superpad http://www.android-tablet-compariso...pare-android-tablets.php?t1=super2&t2=dis7900
I tryed severa methods form the links above - until now nothing worked. Any ideas how to root this device?
Or is there a chance to have a working custom rom?
Hello hstop,
I've also updated my device to Android 2.3.3.
I've tried to root the device with z4root, however also no luck because it's asking for USB-debugging. I am going to try the app you've mentioned and try again.
Also, no success with installing the Market-app...
Edit: Cannot find an .apk-file to install the "USB Debug"-app. hstop, can you tell me how you installed it on your tablet?
I did this !
On all DisGo tablets with 2.3.3 u need:
USBDebug_1.0.apk
https://docs.google.com/open?id=0B7Cmt_BvYmR3b2FfeGEwc0tRbUd5d0hCaC16SFVaZw
and
SuperOneClick 2.3.3
https://docs.google.com/open?id=0B7Cmt_BvYmR3MEM1LVlxOHlRNDJUNUY0TUJONUxfUQ
Some antivirus programs might show this archive as virus, it's becouse there is expolit for android to root the device.
I will do some tutorial tomorrow.
Sorry for my bad english :/
Cewl! Well done, levvvy! Cannot wait for the tutorial!
And it would be more cewler when the installation of the Android Market is included in your tutorial!
any ideas?
Hi Levvvy, did you have any luck with this tutorial? I have downloaded the above items but the device doesnt plug into the pc so not sure what to do now. thanks
Any progress with the tutorial?
Or has anyone any other ideas how to root this abysmal Tablet
I think that the title says it all, how can one root a chinese tablet that is unbranded or how can one root a new device on the market some samsung or HTC device ?
kemoba said:
I think that the title says it all, how can one root a chinese tablet that is unbranded or how can one root a new device on the market some samsung or HTC device ?
Click to expand...
Click to collapse
Title says: i didnt ask specific question about tablet model.
Few tips:
If you know exactly model of device, first search forum for section with this model and then read post abput rooting.
If you cant find model/models of tablet which you wanna learn to root or wanna ask that describe you procedure then change title to:" Need help to root this xxx(<--type here tablet model) "
I dont own a tablet yet, i want to know how do you root a thing that noone has rooted before you
Need help to root Ramos W13 Pro tablet
Need help to root Ramos W13 Pro 8" tablet (Android 4.03 ICS)
Can only find Ramos W17 (which is 7") or an 8" tablet (Ainol Novo 8)
I cannot install ClockworkMod Recovery to flash roms, such as [ROM][GSM] Jellybean 4.1 JRN84D: Stock Rooted Busybox Deodexed - v2 (6/29/12) for the Galaxy Nexus. My Ramos tablet is recognised as a Galaxy Nexus S by my computer!
Please help as I need to enlarge the displayed fonts (I'm exceedingly old!)
I have previously rooted my Ainol Novo 7 Paladin 7" tablet ([ROM] Ainol Knight Paladin Custom ROM 0.5) and my HTC Desire Z phone (CM7)
Rooting Ramos W17 & W13 Pro Tablets
I have finally found a way to root these tablets!
Visit http://translate.googleusercontent....1.html&usg=ALkJrhjg_C2RT-zCYyEpjWs-r6z55e0RIQ
The download links fail, but do a Google search for each individual (3) files to download. Then follow the instructions on above link.
No need to wipe cache, etc, if you have working Android ICS 4.0.3
Worked for me.
:laugh:
Still can't install ClockworkMod, so no NAND backups!
New firmware now available by finless bob
For Ramos W13 Pro!
http://www.FreakTab.com/showthread....ROM V1.2 - Full Root, Full Google Play store!
how's about for RAMOS W3HD? anyway to upgrade it to ICS?
tnx
Please need help
Kindly i need help with my MW07Tablet 9.7" 16G [Model Number MW07. Android Version 4.0.3. Baseband Verion 1.2. Kernel Version 3.0.8. Build Number mw07-eng 4.0.3 IML74k20120531 test-keys], which i'm looking for the stock rom and how to root it and upgrade it to JB or CM10
i can not even install CMW
I have a souiycin S66 9.7" tablet can that be rooted?
I have a soulycin S66 9.7" tablet can that be rooted?
anyhow chinese person with one of these rooted their tablet
must be someone thats knows how to without bricking it?
cheers
dx.com/p/souiycin-9-7-ips-dual-core-android-4-0-capacitive-touch-screen-tablet-pc-black-silver-16gb-149648
need help to root zen ultratab
it works on ics 512mb ram,4gb ibternal memory model no. A100
First, I would try to install a program on it that need root, like Titanium Backup, and make certain it isn't rooted already. Some Chinese brands are not.
Coby kyros MID7033
maneken25 said:
Title says: i didnt ask specific question about tablet model.
Few tips:
If you know exactly model of device, first search forum for section with this model and then read post abput rooting.
If you cant find model/models of tablet which you wanna learn to root or wanna ask that describe you procedure then change title to:" Need help to root this xxx(<--type here tablet model) "
Click to expand...
Click to collapse
wanted a procedure to root the tablet brand: Coby Kyros, model: mid7033 help me please
Ok... so anyone up for rooting a chinese tablet? Got a Colortab-MID that according to the android system app is manufactured by WonderMedia and has an ARMv7 chip. PC at first recognized as Samsung S but after downloading android apk for 4.0.3 it connects with adb. Superoneclik said it was roted but somehow I cannot get superuser on. Went into the shell with adb and cannot change to su nor can I ask to "remount" the system as rw.
Any ideas?
Sent from my Colortab-MID using xda app-developers app
earthspiritraven said:
Ok... so anyone up for rooting a chinese tablet? Got a Colortab-MID that according to the android system app is manufactured by WonderMedia and has an ARMv7 chip. PC at first recognized as Samsung S but after downloading android apk for 4.0.3 it connects with adb. Superoneclik said it was roted but somehow I cannot get superuser on. Went into the shell with adb and cannot change to su nor can I ask to "remount" the system as rw.
Any ideas?
Sent from my Colortab-MID using xda app-developers app
Click to expand...
Click to collapse
Well I doubt its rooted then. Can you do a "adb remount"? Without any extra tags.
Sent from my Galaxy Nexus using xda premium
Nope. Got a "remount failed: operation not permitted" error message
Installed from play store link2sd, superuser and root explorer. Of course root explorer does not mount rw so surely not rooted.
To append more information. I've already tried:
Unlock Root ver 3.0 - says failed to get shell root
DooMLoRD_v4_ROOT-zergRush-busybox-su - basically says the same thing, it even asks if already root
Cube Root for ICS 4.0.3 - experimented for the heck of it with this script but no gain
185_root_script - Found that this is for GB apparently
SuperOneClickv2.3.3-ShortFuse - this version is apparently the latest but again no gain
It seems that all find that shell root cannot be obtained or that adb remount does not happen
Sent from my Colortab-MID using xda app-developers app
Ok, got the 10" tablet rooted
So. After crawling around for about 3 days with google, and in XDA and flashmyandroid forums I found something that works with my chinese tablet. Bloody thing doesn´t let me put links so I´ll tell you what and how I found the needed file.
The file I used is named "Android_Root_1.0.zip" and I found it by plugging in "root" "tablet" and "generic" in XDA forum search. There is a forum by the name "[Q] Obtaining root on generic tablet" in which post #25 has a link for the file.
Just make sure of the following:
1) That the tablet is charged, has off-market apps allowed and USB debugging selected
2) When the tablet connects you use the USB drivers supplied in the Android SDK (I used ver 20.0.1). How to use such drivers is especially important for these "generic" tablets, just follow the instructions in other posts for changing the drivers. My tablet was recognized as a Samsung Galaxy S by Win7, which of course it is not.
3) Download, extract the archive and double click on the *.bat file
**Make sure you always wait for the tablet to reboot before pressing keys as instructed**
4) Voilá, if all goes well you should have a rooted tablet.
Information of use to all crawlers:
Manufacturer: WonderMedia
Country: China
Model: ColorTab-MID (10" screen)
Processor: ARMv7 rev(0)
Android: 4.0.3
Bought in Mexico from a SuperFin sale (similar to a cyberMonday in the USA)
P.s. now I'm going to try with my wife's... same mfgr but with a 7" screen. Need to check the processor though.
Hey guys, I just bought a new model of a 7inch Genesis Tablet. The model is GT-7240. Do you think the method that is used to root another 7inch model of same brand would work for my GT-7240 without bricking risks?
Thanks in advance! I'm really looking forward to having my tablet rooted.
flaviamassa said:
Hey guys, I just bought a new model of a 7inch Genesis Tablet. The model is GT-7240. Do you think the method that is used to root another 7inch model of same brand would work for my GT-7240 without bricking risks?
Thanks in advance! I'm really looking forward to having my tablet rooted.
Click to expand...
Click to collapse
The process I described for rooting my 10" generic chinese tablet I followed exactly for my wife's 7" tablet and it worked. I think my wife's is a wm8950 based tablet that is arm cortex a8 while mine is a wm8850 which is arm cortex a9. Mind, the ICS is somewhat different in each one but both "rooted" correctly without much fuss.
Sent from my Colortab-MID using xda app-developers app
Trying it now, thaaanks!! Im just a bit confused abou the whole JDK and ADB thing, but trying to go over it reading other posts as sugested. But anyway, if you could explain in more details would be great!
Sent from my GT-S5830i using Tapatalk 2
flaviamassa said:
Trying it now, thaaanks!! Im just a bit confused abou the whole JDK and ADB thing, but trying to go over it reading other posts as sugested. But anyway, if you could explain in more details would be great!
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Ok here goes what I remember of how it goes. You need to be able to access the tablet from your computer and being that it is a chinese one that means that you will need the Android SDK because it has the USB driver. First off you need to go to java (at their website) and download and install the JDK (java development kit which you can find at www dot oracle.com/technetwork/java/javase/downloads/index.html). Once that installation is finished you need to download the Android SDK (you can find it at developer.android.com/sdk/index.html) which is in zip format. Unzip and take note of the folder. Navigate to that folder and double click on the SDK manager file. When the window opens make sure that all Android 4.0.3 boxes are selected (under Android 4.0.3 section) as well as the boxes from Android SDK Tools, Android SDK Platform-tools Under tools section) and the Google USB driver (under extras). Once the software is downloaded and installed restart your pc (just to make sure that all is well).
On your tablet make sure that USB debugging is selected (under settings) and connect your tablet to the PC. Regardless of what happens you will need to change the drivers the PC uses to connect to those in what you downloaded. Go to control panel, hardware then hardware manager and look for the tablet... it either will have incorrectly assigned drivers (mine were Nexus S drivers) or it will have a ! meaning that no appropriate drivers were found. Right click on the assigned name and then click on update drivers. Follow prompts to update from disk and navigate to the USB folder you created under the Android SDK installation folder.
Once that is done then download the file I mentioned in the link above. It will come in a zip file so unzip and take note of the folder. Navigate to the folder and double click on the **.bat file. It might happen that you have a DOS error which says that it did not find ADB. You will have to add the ***\tools folder of the Android SDK installation folder to the system path in the environmental variables (if you don´t know how just follow the instructions in java.com/en/download/help/path.xml).
Be carefull to always wait for the tablet to restart and be "seen" by windows after each key press once you double clicked on the **.bat file. You can leave the Hardware Manager box open and keep on eye on the tablet appearing there.
So... were these pointers enough? LOL being a bit sarcastic. Have fun.
i picked up the polaroid 9 inch internet tablet (pmid920 model number) for $88 bucks today from menards that came with a keyboard and the case and the tablet. I dinked around with it for a bit doesn't seem to bad besides not having the android market, im ok with the tablet seems decent for the price and the basic needs i will be using it for. But when searching the internet I can't find a single review or a guide to root it or any custom roms. Has anyone else purchased this tablet on black friday? or heard good or bad things? Any help how i could get root and flash a rom or atleast get play market? Thanks guys.
specs:
android 4.2
1.6 Ghz Dual-Core
Ram: 1gb/DDR3
Res:1024x600
Int Mem: *gb
Ext Mem: Micro Sd
I picked one up as well and also have been un able to find any info on how to root it or install Google play.
polaroid pmid920
I also got one today but im hesitant to open it without reading a good review. How is the performance? Is it sluggish or does it respond well? I also just bought a sansung galaxy tab 3 7.0 and im disappointed because of how slow it is. Can anyone confirm the response of this tablet? I want to be sure thid time before I regret openning the bix. I searched for other sites and it doesnt seem to be one of the recognized models by android. Thats probably why theres no google play.does it allow installation of apps from other sources? Thanks for any review ir response!
I got a similar deal yesterday; Insignia Flex 8
Having the same problem with rooting. Seems like not many people try with these budget tablets.
What chip is it running?
I wonder if it's similar to the flex and maybe the same method will work for both?
PMID920 Root ?
PMID920 rooted !
Hey guys I think I got the bastage rooted, have to retrace my steps on how I did it.
I will post my files for you soon!
uploading a few pics for now.
anything that I can test to make sure I have full root ?
lionedas said:
PMID920 rooted !
Hey guys I think I got the bastage rooted, have to retrace my steps on how I did it.
I will post my files for you soon!
uploading a few pics for now.
anything that I can test to make sure I have full root ?
Click to expand...
Click to collapse
Please do! I want to try it on the flex.
Try su in a terminal and make sure it works. Though I think you should be good root checker reports ok.
Root files
I take no credit for these programs and files
I used the modded usb windows drivers in file below to install
the drivers for the PMID920
I used Root_with_Restore_by_Bin4ry_v32 to root the device
selecting option one, and following the on screen instructions
it did not take the first time around, I tried every selection I could
I even un rooted via all methods, but every time it said success
I would check with root check pro and after about the 8th time the damn thing worked.
Try selection ( 1 new ) from the get go, maybe you wont have an issue like me
it kept looking for an ric file, but it would not create it, it seems to have worked
after I created the file.
Now we need recovery, google play, 4.4 kitkat, just messing !
Please post your results.
Edit; got gapps installed, this things turning out to be alright.
needs gps though !
Show some love and hit the thanks.
Seemed to Work for me on the first time.
Have you found any custom roms with Google play and the stock apps that work on it?
How did you guys get it to recognize your device?
Every time I try, it says "Please connect Device with USB Debugging to your computer"
My tablet is connected, with USB debugging on
ArneFW said:
How did you guys get it to recognize your device?
Every time I try, it says "Please connect Device with USB Debugging to your computer"
My tablet is connected, with USB debugging on
Click to expand...
Click to collapse
Did you install the USB driver he attached? Mine just worked the first try.
vandalsblj said:
Did you install the USB driver he attached? Mine just worked the first try.
Click to expand...
Click to collapse
Yeah, well, I just installed DPInst in the folder. Was there something else I should do?
Google play works
Google play works great with the stock ROM!
1 root device as above.
2 download JB gapps, unzip it on your PC and copy the system folder over to this device sdcard/download folder
3 find and install root explorer, copy apk to device and install, run it and click parent folder until you are in root directory
now click read write, instead of read only on the top left to give it permission to write files, navigate to sdcard/download where
the JB gapps system folder was copied, click copy with root explorer as paste it in your root directory where the system folder is,
it will ask you if you want to merge the folder click yes and let it finish, once done reboot your tablet and you will be prompted
to set up a Google account.
You now have Google play, Google tts, calander, voice search, gmail and a brand new toy!
vandalsblj said:
Seemed to Work for me on the first time.
Have you found any custom roms with Google play and the stock apps that work on it?
Click to expand...
Click to collapse
---------- Post added at 06:48 AM ---------- Previous post was at 06:34 AM ----------
ArneFW said:
Yeah, well, I just installed DPInst in the folder. Was there something else I should do?
Click to expand...
Click to collapse
What device are you trying to root the tablet from,
From a windows device you download and extract the USB driver files
you may need to run the driver setup as administrator, after install check
and see if you have adb device in control panel, system manager, it should not
have an exclamation sign on it, if you need lead device to driver folder.
Also try another USB port, and try to unplug the device and plug it back in when the program is looking for it.
Im returning mine, as i found at walmart they had a 10.1" tablet for $99 that had good reviews on amazon. This tablet seemed to be hit or miss for the 7 inch version after finding reviews on amazon. awesome that it was found how to find root, i just couldn't stand the screen as it seemed u had to be straight on with it or it was hard to see. for a extra $11 i figured i'd return in to menards and go with the 10.1" tablet. Here is the link for it.
http://www.walmart.com/ip/TRIO-Stealth-G2-10.1-Tablet-Dual-Core-with-16GB-Memory/26973760
any info on this one?
Is there any dedicated sites for tablets? as xda seems clearly for mobile devices..
lionedas said:
I take no credit for these programs and files
I used the modded usb windows drivers in file below to install
the drivers for the PMID920
I used Root_with_Restore_by_Bin4ry_v32 to root the device
selecting option one, and following the on screen instructions
it did not take the first time around, I tried every selection I could
I even un rooted via all methods, but every time it said success
I would check with root check pro and after about the 8th time the damn thing worked.
Try selection ( 1 new ) from the get go, maybe you wont have an issue like me
it kept looking for an ric file, but it would not create it, it seems to have worked
after I created the file.
Now we need recovery, google play, 4.4 kitkat, just messing !
Please post your results.
Edit; got gapps installed, this things turning out to be alright.
needs gps though !
Show some love and hit the thanks.
Click to expand...
Click to collapse
How did you manager to create the ric file and is it a file or folder? I'm using ES File explorer and it just tells me "Task Failed" when I attempt to create it.
the driver is sweeet. i searched for one earlier today with no luck, thank you. i am new to the rooting concept. im having trouble with what to do with it. i open the run me on my computer with the tab connected (debug on) and the commands are responding cannot find specified path. please help this is the closest ive gotten to gps on this tab.
---------- Post added at 07:54 AM ---------- Previous post was at 07:36 AM ----------
got it. thanks for all the help and steps.
tadboy89 said:
the driver is sweeet. i searched for one earlier today with no luck, thank you. i am new to the rooting concept. im having trouble with what to do with it. i open the run me on my computer with the tab connected (debug on) and the commands are responding cannot find specified path. please help this is the closest ive gotten to gps on this tab.
---------- Post added at 07:54 AM ---------- Previous post was at 07:36 AM ----------
got it. thanks for all the help and steps.
Click to expand...
Click to collapse
I'm having the same issue, how did you get passed the"Cannot find specified path error?
Sent from my SPH-L710 using Tapatalk 2
Help please
I'm trying everything I have seen here but my 920 won't root, I get a deameon started message sometimes but nothing happens. I'm using a windows 7 machine, installed usb driver and still nothing. I've installed craynogen mod on a tab 2 10.1 and then this little tablet stumps me. Anything would be helpful. If you need more info just pm me.Thanks
biggdevon said:
I'm having the same issue, how did you get passed the"Cannot find specified path error?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
i had to extract the file which contained the run me for the root, again. i had it working....i thought. i was wrong it isnt working
Anyone other than lionedas able to root this thing? I'm getting no where...
Sent from my SPH-L710 using Tapatalk 2
I got this tablet just last night. I truthfully wouldn't mind if it couldn't access the market, except that the stock youtube player on the device doesn't seem to be able to play playlists, just single videos, it won't auto-play any playlists.
I've downloaded the android market (Gapps-2.3.4.zip) on the device and installed it, but whenever I try to open the market, it asks me to add an account, and clicking yes just closes back to the main screen.
I tried Lionideas (sp?) steps, downloading both the root by recovery and usb driver. I installed dpinst-32bit.exe, as well as running adb.exe (wasn't sure if both were necessary, or if any further steps are necessary.)
After that, I enabled USB debugging on the device (there's a notification on the top status bar that it's running), connected it to my PC, and ran the runme.bat file. Selecting option one, it tells me to connect a device with usb-debugging enabled, and halts there...as far as I can tell I've followed the steps, can anyone enlighten me?
Hi everybody,
not sure whether I can post this within the clone phone threads since I do not know the processor nor the manufacturer.
Phone is a pseudo iPhone which runs some kind of Android which is disguised as iOS (really bad quality).
Unfortunately this Android is really instable and phone does not work reliably.
Now I am trying to find out whether there might be another Android version which I could flash instead. Already identified Needrom as possible source but need the real device manufacturer and processor before.
Any idea how I could proceed here? Just still trying to avoid to connect to PlayStore on this phone since the Chinese ones are known for their spyware.
Recoveryis accessible.
From backside: A1660FCCID;BCG-E3085AIC59C-E3085A
From About: Modell: MNRJ2CH/A
Which other information do I need to provide/identify the phone and how do I get it?
Any help highly appreciated.
Bye
First things I identified are that it seems to be a Lenovo using MT65xx - at least this was shown during driver installation when phone was connected to Win PC.
After connecting to Win10 Laptop YunOS ACB Interface has been installed. MTKTools tells about the already known fake and says its an MT6582.
So how can I provide a suitable stock ROM onto it?
Renth said:
First things I identified are that it seems to be a Lenovo using MT65xx - at least this was shown during driver installation when phone was connected to Win PC.
After connecting to Win10 Laptop YunOS ACB Interface has been installed. MTKTools tells about the already known fake and says its an MT6582.
So how can I provide a suitable stock ROM onto it?
Click to expand...
Click to collapse
Hey Renth,
I am afraid I got one of those too. It looks like an iphone with 250GB memory, but in eality it only has less than 50 MB.
Model: A1660 FCCID BCG E3085A IC579C E3085A
I a wondering also if I can wipe out whatever it has installed.
Sorry for the late reply. I also raised that topic within China Devices Forum back then. There I documented all my activities (hopefully did not forget anything).
Do not know whether cross referencing is allowed, so just send me a PM then I can provide you the link. Alternativly you can ask google for "How to identify real device (Clone phone)?" and then follow the link with the same topic at Chine Devices forum.