hi buddy ..
i m use rls18 and kennal 6.25 .. i install sys in my nand and data in card ext2 and now i have 560mb for installations its good for me .. if any one what to know how i done then reply me ... tomorrow i will tell you all how i did and android working so good i cant explan ... what i did its good for me but i hope u also like it .. .,.. sorry for my english is not so good but i try my best .,... its 3d games also work so good .. i test only on my pola200 ...
u need to make partition like this fat32 how much u like and first ext2 must be 300mb and second 600mb and swapp2 is 70mb
when u make partition like this then u del ur ext2 which u make 300 after u restart ur mobile and vol up and d-pad ... then u sys install on nand and data on sd parition .. then install then put out ur sd card then make ur 300 ext2 .. then put again ur sd card in and make it on .. have fun
can you explain to us step by step
hi again
i have xda orbit2 pola200 ..
first i install 2.6.25 then i put my sd card in pc with card reader
then i make partitions i have 4gb class 4 if u use class 6 then its more good ..
i make my partition like this fat32 is 2.8gb and ext2 is 300mb and second is 600mb and swap lanx is 100mb ... i use partition for paragon its good and easy ..
when its done then i delete first ext2 which is 300mb then its show u 300mb unloucate show .. then make folder andboot and put in androidinstall and update .. then put back ur sdcard in phone and on ... hold vol up and d-pad and then u see menu then sys on nand and second in data on sdcard partition then install system ... after its complete then again do install update then restart ur phoine with pin ..
put out ur battery and put out ur sdcard with phone and put ur card in pc with card reader and open open again paragon partition .. and make partition again only 300mb in ext2 which show u unallocated then put ur sdcard in phone then put battery back to phone .. and on then have fun .... i hope u will be enjoy ... and i using Not So Super Froyo [RLS18] and its good for me if u need my setting then i will send it ....
if you use atools you can select the correct partition for SYS and DATA and you can avoid to create and delete the partition.
thanks but i dont know how to use atools bcos they show me .. sd partition p2 ,p3 .p4 but i dont know what is p2 p3 p4 partition .. if u giude me then i will be thankfull to you .. can u guide me how to use swap partition ?
loveyounw said:
thanks but i dont know how to use atools bcos they show me .. sd partition p2 ,p3 .p4 but i dont know what is p2 p3 p4 partition .. if u giude me then i will be thankfull to you .. can u guide me how to use swap partition ?
Click to expand...
Click to collapse
i try to do like you .
system on nand,data on sd
but it's so slow!
i just fell it's slower than both on sd.
I have tried to partition my SDcard.but its slower than install the android to a IMG file.It's so strange.can you tell me why?
hi buddy
thanks .. well i tell you what i did ... my use atools and i make my phone 450mhz and i also use swapper 2 its good and its 64mb ... its work fine ,,, but in first 20 mins its work slow after its work nice ... bcos every thing save in sd , data ,setting,etc.. i play fifa 10 and caligocha ,3d homebattle its work nice ... but first time its work slow after its 1mins its work fast ....oh u need one thing more which make ur phone more fast ... its ADWlauncher ex .. its very good ...
and can u tell me which sd card u r using ?
What is the problem with partitions?
If you divide the sd in several part you will have partitions.
First partition is in fat32 and you can't install system on it.
l1q1d said:
What is the problem with partitions?
If you divide the sd in several part you will have partitions.
First partition is in fat32 and you can't install system on it.
Click to expand...
Click to collapse
I'm just wondering why install system on a EXT2 partition is slower than on fat32.
I tried many times,but fat32 is always faster than EXT2.
This is very strange.
And,i flash your latest NBH file which release in the January 13.
I meet some problems.
it stop at
"install modules to kernel"
"to sourceforge"
How to solve the problem?i never meet in the past.
thank you !
loveyounw said:
hi buddy
thanks .. well i tell you what i did ... my use atools and i make my phone 450mhz and i also use swapper 2 its good and its 64mb ... its work fine ,,, but in first 20 mins its work slow after its work nice ... bcos every thing save in sd , data ,setting,etc.. i play fifa 10 and caligocha ,3d homebattle its work nice ... but first time its work slow after its 1mins its work fast ....oh u need one thing more which make ur phone more fast ... its ADWlauncher ex .. its very good ...
and can u tell me which sd card u r using ?
Click to expand...
Click to collapse
i use a 4GB class4 card,
of course,it will become fast after a few minutes.
but FAT32 is truely faster than EXT2.
I don't know why.
I always think running system on a virtual partition(IMG file) is slower than a real EXT2 partition.
But maybe I was wrong.
the image on disk should be slower so it's a bit strange.
You forgot to install modules (look in atools mixer or in this thread)
l1q1d said:
the image on disk should be slower so it's a bit strange.
You forgot to install modules (look in atools mixer or in this thread)
Click to expand...
Click to collapse
Thx!
I have read the post,but i don't found that what i should do.
please tell me what should i do ,thank you !
And,i have another problem,
I usually lost data,when NAND.
when android is crash,i push the Reset hole,
Than,I may not enter the system,get a lot of FC when see the desktop,or found that some software is lost.
Do you have this problem?
um..can you understand what i am talking about?
my english is so poor,Please forgive me
Can you upload all files i need for it and explain i got pola 200 to, and wonna try it, if that isnt to much work for you thx
@我是春哥: the loss data problem is now the big problem and there is one developer who is working on it.
in order to fix "install module" download the androidupdate.tgz from the thread (or sourceforge)
put it in /andboot (sdcard)
go to atools (bse) select your sys location and select apply update.
save the install-seq.sh
put it in /anboot
insert the sdcard in the phone
boot the phone.
OR
put it in /andboot (sdcard)
insert the sdcard in the phone
boot the phone
press dpad
on menu select apply update
and then quit
@damir1987: follow the step by step guide.
l1q1d said:
@我是春哥: the loss data problem is now the big problem and there is one developer who is working on it.
in order to fix "install module" download the androidupdate.tgz from the thread (or sourceforge)
put it in /andboot (sdcard)
go to atools (bse) select your sys location and select apply update.
save the install-seq.sh
put it in /anboot
insert the sdcard in the phone
boot the phone.
OR
put it in /andboot (sdcard)
insert the sdcard in the phone
boot the phone
press dpad
on menu select apply update
and then quit
@damir1987: follow the step by step guide.
Click to expand...
Click to collapse
thank you!
Before the problem be solved,i would not flash the android to nand.
I hope you can solve this problem，
Thank you for all you hard work!
why i intall system on nand bcos its safe and we dont loss our system file and its good otherwise our systam is crash and its not good things .... well my advise is this we use systam on nand its make ours android fast and safe and data on install on sd card what ever u like its img or ext2 its all up to you ... but its all safe what i say ,, bcos i test too much .... bcos when our systam android is crash its crash all things ,,, i hope u all understand ... fast boot is slow but in two or 3 boot its faster ... but remumber one thing how much we install games and software its make android havay ... i prefrar to 2.6.25 kernel ... bcos i play games and software its work fast ,.,, thanks you to all .. who try this ...
Related
Im realy new to this. I just rooted my phone.
Now from whath i understand thath you can install apps to the sd card if you Partition it,and you need a custom rom thath supports it (right??)
Now i saw on youtube thath you can Partition your sd card using rom manager.
my questtion is
1. is this a good way.cause i know there are other ways.
2.if i Partition trouth rom manager will i just be able to install a rom thath supports app2sd and thaths it.
3.if i do number 2 will i be able to install this rom and have app2sd(i really want it) ,,RCS MixHD v3.0,,
4.on the rom ,,RCS MixHD v3.0,, it says
,,,A2SD version - Fat + Ext3/4, 0.5-1.5GB recommended,, explain please
make partitions from recovery. it's the best idea for this operation. also you can install link2sd from market. it's ap2sd menager with GUI.
just a word of advice, backup up all your apps, (apks and data) and also your media files before partitioning (just in case)
mybackup or titanium backup are both good.
-Dan
To make partition easier , try partition wizard , u can get it from download.cnet for free . Please note that this is for pc , not android phone . The reason why i would recommended you to use this is because you can resize your FAT partition and make a ext2 partition instead of format your FAT partition . Generally , you won't loss any data on your sdcard with this method . For moving app to sdcard , just use link2sd which is available at market as well as in this forum , just simply search for link2sd . This app is awesome as it lets you to choose app that you wish to move . I didn't change my rom and it works fine so far . Give it a try !
nikctsh said:
To make partition easier , try partition wizard , u can get it from download.cnet for free . Please note that this is for pc , not android phone . The reason why i would recommended you to use this is because you can resize your FAT partition and make a ext2 partition instead of format your FAT partition . Generally , you won't loss any data on your sdcard with this method . For moving app to sdcard , just use link2sd which is available at market as well as in this forum , just simply search for link2sd . This app is awesome as it lets you to choose app that you wish to move . I didn't change my rom and it works fine so far . Give it a try !
Click to expand...
Click to collapse
BUT this work ONLY with internal sdcard, not with ext card like the man said
i know that i am looking for a solution since 2 weeks and no way as i seen
Obviously one of the great reasons to root is to "trick" the phone into believing it has more internal mem/move apps to the sd card. I have am first time droid user and am running into limitation issues already. Question then:
is it necessary to partition sd card manually (I am not extremely tech savvy and seems very complex) or is it possible that installing a custom rom (i.e. megatron) partitions the sd card when installed.
Thanks for patience, I would really like to take advantage of this, but can't really find a straight-forward instruction/advise.
i really don kno how to use the a2sd on fitdroid v2.0
can someone plz help?
Dude, ull first have partition your sd card. Then only u can use darktremor apps to sd. To partion your sd card, go to recovery mod>advanced>partition>and then select the size of partition. Atleast 512mb of partition is recommended.
After doing that,reboot ur phone and now a2sd should work without any issues!
Feel free to ask if u still have any problem
sent from my galaxy fit + CM7 using xda premium app
try help
alaric.m said:
i really don kno how to use the a2sd on fitdroid v2.0
can someone plz help?
Click to expand...
Click to collapse
maybe this coud help you
IF U WANT DARKTREMOR A2SD TO WORK THEN U HAVE TO PARTITION UR SDCARD.
TO PARTITION FIRST TAKE BACKUP OF UR SDCARD AS IT NEEDS TO FORMAT UR CARD WHICH WILL ERASE ALL UR SD CONTENT.
IN CWM MENU GOTO ADVANCED MENU.
SELECT PARTITION SDCARD.
SELECT SIZE U WISH(512 or above) AND SELECT 62 or above AS SWAP VALUE.
WAIT FOR SOME TIME AND RESTART UR DEVICE....
TO CHECK A2SD WORKING OR NOT GOTO APP DRAWER MENU AND OPEN A2SDGUI APP AND CHECK APPS ARE ON SD IS ENABLED....
if it is active, you can move the Dalvik cache to sd card by selecting the Dalvik cache on SD-EXT and press Move button and reboot phone
sory for my language
tried that, did not work
Bhocan said:
maybe this coud help you
IF U WANT DARKTREMOR A2SD TO WORK THEN U HAVE TO PARTITION UR SDCARD.
TO PARTITION FIRST TAKE BACKUP OF UR SDCARD AS IT NEEDS TO FORMAT UR CARD WHICH WILL ERASE ALL UR SD CONTENT.
IN CWM MENU GOTO ADVANCED MENU.
SELECT PARTITION SDCARD.
SELECT SIZE U WISH(512 or above) AND SELECT 62 or above AS SWAP VALUE.
WAIT FOR SOME TIME AND RESTART UR DEVICE....
TO CHECK A2SD WORKING OR NOT GOTO APP DRAWER MENU AND OPEN A2SDGUI APP AND CHECK APPS ARE ON SD IS ENABLED....
if it is active, you can move the Dalvik cache to sd card by selecting the Dalvik cache on SD-EXT and press Move button and reboot phone
sory for my language
Click to expand...
Click to collapse
hi, i tried all of this as you mentioned...
eventually, this darktremor a2sd stopped my apps from being moved at all and it kept on saying that i don't have enough memory... though i know i should have... any thoughts??
Okay, a question from me...
Is it possible to have this swap setup in the stock gingerbread rom (ddkq5)???
Can anybody give a step-by-step tutorial, or maybe just a link, along with a list of all the necessary apps/other stuff that will be needed..??
I have a 16gb memory card in my galaxy fit...
Sent from my GT-S5670 using XDA App
I run Creed´s ROM 1.5 and there is also Darktremor included.
I thought SD was automatical formatted with ext4 by installing it. So I am a little puzzled to see, that moving to SD does not work as well as swap option.
Could you tell me, what is the matter?^^
Edit: Found out by my own, followed the same steps as mentioned above for FITDroid. Works on Creed´s ROM 1.5 as well. Only Disadvantage I found was it reduces my 8GB SD to 4096MB (couldn´t select higher at CWM) also after moving Dalvik, system boot seems to loop .. had to recover (good I did before )
hey guys i am new i really want to know if some one can fix r there's way to fix problem i.e
in creeds rom v2 dalvik-cache move to sd dont work i m stuck on boot loop for hours n i need a solution as in v1.7.2 i had 125 apps now i cant even install 50 of them....plz help.
maybe there's no ext4 partition?
no coz in v1.7.2 i made partition and of 512mb and moved dalvik-cache to sd and 64mb swap but a2sd is working well in v2 jus the move to sd function is not working as described by mr.creedo himself in the thread...n m still using v1.7.2 with sd-ext...
i think its coz of either rom or the kernel coz v2 is based on cmptly new firmware but in v.1.7.2 it is giving no such problem.
try link2sd...
Dalvik cache to sd is not working for now.Even i tried to do so but it din't work and i had to reflash. May be creed will come up with a solution
i have been studying android in deep and i think these steps might help via link2sd
and FAT2 partition
http://forum.xda-developers.com/showthread.php?t=919326
i will try and let you guyz know if its of any use...!!
arhant said:
i have been studying android in deep and i think these steps might help via link2sd
and FAT2 partition
http://forum.xda-developers.com/showthread.php?t=919326
i will try and let you guyz know if its of any use...!!
Click to expand...
Click to collapse
lol, I already told use link2sd...works for me in every rom so far...even cm9...
but its a good thing that you tried to research a little...keep it up...
a.cid said:
lol, I already told use link2sd...works for me in every rom so far...even cm9...
but its a good thing that you tried to research a little...keep it up...
Click to expand...
Click to collapse
hey its wierd..i made a secondary FAT32 partition using minitools and then flash v2 n try to link my secondary drive but wenever i choose fat32 its shows error then i noticed that this rom automatically changes fat32 to ext3 wenever i insert sd card though i was able to mount my ext3 using link2sd but wen i link dalvik-cache it shows no dalvik-cache..!!
how's dat possible....is it something wrong with rom??
thnx anyway
i was searching a more n i found this thread
http://forum.xda-developers.com/showthread.php?t=1042828
data2sd but it is under development...btw it can be use if made for fit..
arhant said:
i was searching a more n i found this thread
http://forum.xda-developers.com/showthread.php?t=1042828
data2sd but it is under development...btw it can be use if made for fit..
Click to expand...
Click to collapse
ya that is ungaze script...already implemented in cm7.2 rc5.5 by asad007
I haven't tried partition tool...I partitioned via cwm...
and your secondary partition should be ext2/3, not fat32...
I partitioned ext 4 via windows. Putted ungaze script. Working . Same benchmark as without script. I am on rc 5,5
Sent from my GT-S5670 using Tapatalk
djozaa said:
I partitioned ext 4 via windows. Putted ungaze script. Working . Same benchmark as without script. I am on rc 5,5
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
will this move dalvik-cache to sd...if yes
plz give me download link!!!thnx
a.cid said:
ya that is ungaze script...already implemented in cm7.2 rc5.5 by asad007
I haven't tried partition tool...I partitioned via cwm...
and your secondary partition should be ext2/3, not fat32...
Click to expand...
Click to collapse
hey will this method work in any rom r jus in cm7.2 rc5.5....n will this move dalvik-cache to sd....
\?
http://forum.xda-developers.com/showthread.php?t=1042828
Please read instructions and do backup before
Sent from my GT-S5670 using Tapatalk
arhant said:
will this move dalvik-cache to sd...if yes
plz give me download link!!!thnx
Click to expand...
Click to collapse
Yes. Post above is link
Sent from my GT-S5670 using Tapatalk
djozaa said:
http://forum.xda-developers.com/showthread.php?t=1042828
Please read instructions and do backup before
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
Het guys please becarefull about the partition thing..
Because its very risky and you better have backup of your sdcard ane save that backups at your PC or notebook..
Some of my friends has been loosing all of his data because of it.
When u first time partitioning sd card, it will remove all your sd card stuff ofcourse. Just put it on desktop and move back when partition is done.
Sent from my GT-S5670 using Tapatalk
a.cid said:
try link2sd...
Click to expand...
Click to collapse
hey thnx ..it wrks n i have 134mb free...
Enter Recovery Mode by holding POWER + HOME;
With the Volume Down key (-) and High Volume (+) and navigate to the HOME key Select "advanced";
Select "partition SD Card"
In the next window you should choose the partition size.
If you have a 2GB card to advise you put 512mb 1024mb,
If you have a card with 4GB or 8GB advise putting 2048mb.
And finally select the size of the swap partition for extra memory.
If you have an urge to put 2gb card 128mb,
If you have a card with 4GB or 8GB advise putting 256mb.
enter the Market and install the program Links2SD
to open the program you should choose ext3 and press ok> then superuser permission> and after that restart your phone.
Now press the Options button to display the sub-menu of the program
Made this to take and check the settings, and automatically link-site check in'' automatically''.
Now press the Options button to display the sub-menu of the program.
Made this to take and check the settings, and automatically link-site check in'' automatically''.
Return to initial screen of the program, press the Options button to display the sub-menu and then click multiple selection, press the shutter button and select options select all, press again press the options button and click Actions, and click Create link. Press OK to start, and all your applications ready to go to memory that was created ext3.
Now we will install and configure the Swapper. Lower application, install the application by the Market, after check the Active on Boot Swap on Swap File Position sure "EXT Partition SD Card" in "Swap File Size" set a value as the size of the partition created in ext, I suggest that is a partition of 1024 put 250 if a partition of 2048 put 512 of superuser permissions and restart the phone.
And finally select the size of the swap partition for extra memory.
If you have an urge to put 2gb card 128mb,
If you have a card with 4GB or 8GB advise putting 256mb.
Now we will install and configure the Swapper. Lower application, install the application by the Market, after check the Active on Boot Swap on Swap File Position sure "EXT Partition SD Card" in "Swap File Size" set a value as the size of the partition created in ext, I suggest that is a partition of 1024 put 250 if a partition of 2048 put 512 of superuser permissions and restart the phone.
Click to expand...
Click to collapse
I wouldn't recommend swapper...
long story short, it'll start affecting performance...and do more bad than good...
swap partition is basically virtual ram...but the problem with this is, our phones ram is fast, while even the best of sd cards can't match that...
so you may get better performance initially, but soon you'll regret having a swap partition...
Hi ! tnx a lot from ShadowCode for Xperia-ICS rom
i'm use this custom rom and i love it. but i have one serius problem !
how can i move Dalvik Cach To SD-EXT on this CM 9.1 based rom ???? or any other android 4 roms for htc explorer ???
i cant install a2sd darkteromor scipt on my phone or any other script like mount2sd or... have error.
what is the problem in ICS rom's ???
sorry for english.
bzdesign said:
Hi ! tnx a lot from ShadowCode for Xperia-ICS rom
i'm use this custom rom and i love it. but i have one serius problem !
how can i move Dalvik Cach To SD-EXT on this CM 9.1 based rom ???? or any other android 4 roms for htc explorer ???
i cant install a2sd darkteromor scipt on my phone or any other script like mount2sd or... have error.
what is the problem in ICS rom's ???
sorry for english.
Click to expand...
Click to collapse
CM stores dalvik cache for all system apps in /cache/dalvik-cache instead of /data/dalvik-cache.
Flash mounts2sd.zip from this thread (the first one).
http://forum.xda-developers.com/showthread.php?t=1932874
After rebooting, open terminal emulator and type
su
m2sd cmdalvik enable
m2sd rmount enable
m2sd apps disable
Now reboot and it'll be moved
bzdesign said:
Hi ! tnx a lot from ShadowCode for Xperia-ICS rom
i'm use this custom rom and i love it. but i have one serius problem !
how can i move Dalvik Cach To SD-EXT on this CM 9.1 based rom ???? or any other android 4 roms for htc explorer ???
i cant install a2sd darkteromor scipt on my phone or any other script like mount2sd or... have error.
what is the problem in ICS rom's ???
sorry for english.
Click to expand...
Click to collapse
if you want to move dalvik cache for more internal space then i dont recommend you on doing that..it slows the phone doen (unless you have class 6/10 memory card)..i suggest you use int2xt+ ...for me its the best out there!!
Sachin Thomas said:
CM stores dalvik cache for all system apps in /cache/dalvik-cache instead of /data/dalvik-cache.
Flash mounts2sd.zip from this thread (the first one).
http://forum.xda-developers.com/showthread.php?t=1932874
After rebooting, open terminal emulator and type
su
m2sd cmdalvik enable
m2sd rmount enable
m2sd apps disable
Now reboot and it'll be moved
Click to expand...
Click to collapse
Thank you so much:good: .I 'll try your method and will be announced the result
sorry for english !
vshl2995 said:
if you want to move dalvik cache for more internal space then i dont recommend you on doing that..it slows the phone doen (unless you have class 6/10 memory card)..i suggest you use int2xt+ ...for me its the best out there!!
Click to expand...
Click to collapse
Is it possible to provide more explanation , good friend ?
1st important issue for me is count of applications that I can installed on my Explorer. Because I am a programmer.
speed is in 2nd place.
but your method is interesting for me. plz explain more I LOVE LEARNING
bzdesign said:
Is it possible to provide more explanation , good friend ?
1st important issue for me is count of applications that I can installed on my Explorer. Because I am a programmer.
speed is in 2nd place.
but your method is interesting for me. plz explain more I LOVE LEARNING
Click to expand...
Click to collapse
I'll pm you!
or i will just put it here only..
so basically what it does is that it mounts /sd-ext to /data and leaves application data in internal storage for speed..
im assuming you already know about ext partition and you have partitioned your sd card!! (if you haven't then tell me)
if you want to implement int2ext+ in a rom then download the script from here
http://forum.xda-developers.com/showthread.php?t=1716124
extract it..now download the zip of rom you want to use and make a copy of it somwhere else in your hard disk and open it through winrar..remember do not extract it..navigate to /system/etc/int.d in winrar only and delete all everything in the folder and drag and drop the file you extracted from int2xt+ zip..it will do some working and when its finished just close it...flash this modified zip..and you will see internal memory increased in storage (150mb+the size of ext partition u have made)
EDIT:
It may happen that your rom doesn't boot ..so you make another copy of the original rom and repeat the whole procedure except that dont delete anything in init.d folder..
for example i deleted all files from init.d in cm9.1 build#9 (i dont know what will happen if i dont) and it works..i remember that i deleted all files in evervolv but it didnt boot so i copied without deleting and it booted perfectly!!
i m switch to cm9 build8 rom from jaggy,,,so need sum info.
>use tethering pc to mobile...so i can use my pc internet in my mobile???where is this option??
>i read sumwhere that titanium bckup must be avoided ...so wt i use now for my bckp and restore???
>cant i add my facebook birthday's in my phone calendar,as in option in sense 3.5???
>one thing i notice also when my phone is switch off mode and if i connect it to charging then my recovery menu get open,is this ohk??
tnx a lot from vshl2995 ! your method works perfectly :laugh: i'm very happy speed and performance is really good :good::good:
just 1 Q , can you tell me if i want use another sd card ,for example 16GB sd card (i'm using 8GB sd card now) how can i do that ???
vshl2995 said:
or i will just put it here only..
so basically what it does is that it mounts /sd-ext to /data and leaves application data in internal storage for speed..
im assuming you already know about ext partition and you have partitioned your sd card!! (if you haven't then tell me)
if you want to implement int2ext+ in a rom then download the script from here
http://forum.xda-developers.com/showthread.php?t=1716124
extract it..now download the zip of rom you want to use and make a copy of it somwhere else in your hard disk and open it through winrar..remember do not extract it..navigate to /system/etc/int.d in winrar only and delete all everything in the folder and drag and drop the file you extracted from int2xt+ zip..it will do some working and when its finished just close it...flash this modified zip..and you will see internal memory increased in storage (150mb+the size of ext partition u have made)
EDIT:
It may happen that your rom doesn't boot ..so you make another copy of the original rom and repeat the whole procedure except that dont delete anything in init.d folder..
for example i deleted all files from init.d in cm9.1 build#9 (i dont know what will happen if i dont) and it works..i remember that i deleted all files in evervolv but it didnt boot so i copied without deleting and it booted perfectly!!
Click to expand...
Click to collapse
yes i know about ext partition and any other partition that may exist ! & A few months ago I partitioned my SD
in paper ,your method must be very faster ! but i'm not trying your method yet ! and want to try that very soon
tnx a lot from you for link and description ,guy :good:
Good Luck
bzdesign said:
tnx a lot from vshl2995 ! your method works perfectly :laugh: i'm very happy speed and performance is really good :good::good:
just 1 Q , can you tell me if i want use another sd card ,for example 16GB sd card (i'm using 8GB sd card now) how can i do that ???
Click to expand...
Click to collapse
Oh switching sd cards can be pain in the ass.. Anyway make a partition on ur new sd card (same partition u made on ur old card) make a nandroid backup with your old sd card inserted in mobile.. This makes backup of your sd-ext partition (of course ).. Now copy the whole folder (clockworkmod folder if u are using Cwm and TWRP folder if u are using touch recovery) to your new sd card using your pc or lappy.. Be sure that your phone is switched off or in recovery mode while you are switching cards.. Now when you have copied the backup(s) to your new sd card, insert it in your phone and restore sd-ext part only.. If that doesn't work then full wipe your phone and do a full restore!! Rest of the things in your memory card you will have to copy manually through pc or you can dump your data in cloud and download when new sd card inserted..!
QUOTE=chag03;34262153]i m switch to cm9 build8 rom from jaggy,,,so need sum info.
>use tethering pc to mobile...so i can use my pc internet in my mobile???where is this option??
>i read sumwhere that titanium bckup must be avoided ...so wt i use now for my bckp and restore???
>cant i add my facebook birthday's in my phone calendar,as in option in sense 3.5???
>one thing i notice also when my phone is switch off mode and if i connect it to charging then my recovery menu get open,is this ohk??[/QUOTE]
1.http://forum.xda-developers.com/showthread.php?t=1989047
2.any backup u make from gingerbread roms will be useless.. FCs will occur due to compatibility problems.. You will have to install all apps again
3.for contact syncing fb apps itself supports it.. But I use fb contact sync app for it.. It's awesome if you want their pics to be shown in conyacts.. If you want to sync birthdays you can add your fb calender to Google calendar (if you don’t know how to do dat tell me) your Google calendar is automatically synced with ics stock calendar.
4. Now that's atrange.. Never happened with me...
vshl2995 said:
Oh switching sd cards can be pain in the ass.. Anyway make a partition on ur new sd card (same partition u made on ur old card) make a nandroid backup with your old sd card inserted in mobile.. This makes backup of your sd-ext partition (of course ).. Now copy the whole folder (clockworkmod folder if u are using Cwm and TWRP folder if u are using touch recovery) to your new sd card using your pc or lappy.. Be sure that your phone is switched off or in recovery mode while you are switching cards.. Now when you have copied the backup(s) to your new sd card, insert it in your phone and restore sd-ext part only.. If that doesn't work then full wipe your phone and do a full restore!! Rest of the things in your memory card you will have to copy manually through pc or you can dump your data in cloud and download when new sd card inserted..!
Click to expand...
Click to collapse
tnx guy perfect
Hi....... :fingers-crossed:
I guess everyone here have known about the Great ROM called ICY SNAP (thanks to Neko for that such great ROM ). :good:
But i miss the tutorial how to use the Data2ext Feature on it ?
First of all.. Before using a data2ext we should have a partition on our SD-Card, isn'it ?
So that we can use that partition to use the Data2ext and move our app/data.
My question is :
1. How to create a Partition on my SD-Card with the safest way.
2. And after we create it, what should we do next ?
3. I read from the Icy Snap Thread notice, we may activate the Data2ext via Terminal Emulator Command. And after i do the 2 step above, may i just activate it through it ?
Thanks in Advance for your great Help and Answers. :victory: :angel:
Boot in recovery mode. Now select "Partition sd card", Next select Partition sd then set swap size= min 64MB(recommended by neko), Set ext-size= As you want and confirm thats it.
But backup your sd card before bpartitioning since it will be formatted during the process.
ashishv said:
Boot in recovery mode. Now select "Partition sd card", Next select Partition sd then set swap size= min 64MB(recommended by neko), Set ext-size= As you want and confirm thats it.
But backup your sd card before bpartitioning since it will be formatted during the process.
Click to expand...
Click to collapse
I use the 8GB SD-Card.
Can you tell me how much the recommended swap size and ext-size ?
I read from many other thread.
There are so many different method that consfusing me.
They talking about the ext2, ext3, ext4.. FAT format. Bla bla bla.
Should i've to notice about it as well in this method ?
sent from my Rusty Pan
just4bimo said:
I use the 8GB SD-Card.
Can you tell me how much the recommended swap size and ext-size ?
I read from many other thread.
There are so many different method that consfusing me.
They talking about the ext2, ext3, ext4.. FAT format. Bla bla bla.
Should i've to notice about it as well in this method ?
sent from my Rusty Pan
Click to expand...
Click to collapse
I use 768mb ext 4 and 0 mb swap.Partitioned with amonra recovery and then disabled journaling.
ashishv said:
I use 768mb ext 4 and 0 mb swap.Partitioned with amonra recovery and then disabled journaling.
Click to expand...
Click to collapse
I have partitioned 1.9 GB Ext 3 on sdcard 8 gb, is that ok for icysnap 1.6? (I'm FINALLY getting my phone tomorrow:victory
Just partition sd card frm any recovery nd then switch on ur cell then open terminal emulator in that type su nd then press enter then type d2ext then again type enter.. then it will ask fr reboot required. Then juz restart ur cell.. nd u have done juz check ur storage in settings.. it vil show u increased internal storage... if any question ask me.... i vl definately help u.....
Sent from my LG-P500 using xda app-developers app
after partitioning sd card you need to do in android terminal a data2sd enable and a zipalign ( as neko provided in instructions ), after reboot I got 450mb free space on internal memory
maheshpatole said:
Just partition sd card frm any recovery nd then switch on ur cell then open terminal emulator in that type su nd then press enter then type d2ext then again type enter.. then it will ask fr reboot required. Then juz restart ur cell.. nd u have done juz check ur storage in settings.. it vil show u increased internal storage... if any question ask me.... i vl definately help u.....
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
grigtm said:
after partitioning sd card you need to do in android terminal a data2sd enable and a zipalign ( as neko provided in instructions ), after reboot I got 450mb free space on internal memory
Click to expand...
Click to collapse
Thx for you both to answer my question.
I will try to do this as soon as possible.
Before do this. I don't have to wipe anything on my system, do i ?
And after partitioning i don't have to reflash the rom as weel ?
sent from my Rusty Pan
just4bimo said:
Thx for you both to answer my question.
I will try to do this as soon as possible.
Before do this. I don't have to wipe anything on my system, do i ?
And after partitioning i don't have to reflash the rom as weel ?
sent from my Rusty Pan
Click to expand...
Click to collapse
first of all do a sd card partition, that will wipe sd card so u will loose all data from sd, after this recover your saved data back to sd from where did u saved it, after this do the android terminal comands and reboot, now it is done, noting will happened to system
were u able to get thruogh this
I am getting bootloop after reboot after d2ext .