Database Info

i m using both style nand with big data .. orbit 2 xda

hi buddy ..
i m use rls18 and kennal 6.25 .. i install sys in my nand and data in card ext2 and now i have 560mb for installations its good for me .. if any one what to know how i done then reply me ... tomorrow i will tell you all how i did and android working so good i cant explan ... what i did its good for me but i hope u also like it .. .,.. sorry for my english is not so good but i try my best .,... its 3d games also work so good .. i test only on my pola200 ...
u need to make partition like this fat32 how much u like and first ext2 must be 300mb and second 600mb and swapp2 is 70mb
when u make partition like this then u del ur ext2 which u make 300 after u restart ur mobile and vol up and d-pad ... then u sys install on nand and data on sd parition .. then install then put out ur sd card then make ur 300 ext2 .. then put again ur sd card in and make it on .. have fun

can you explain to us step by step

hi again
i have xda orbit2 pola200 ..
first i install 2.6.25 then i put my sd card in pc with card reader
then i make partitions i have 4gb class 4 if u use class 6 then its more good ..
i make my partition like this fat32 is 2.8gb and ext2 is 300mb and second is 600mb and swap lanx is 100mb ... i use partition for paragon its good and easy ..
when its done then i delete first ext2 which is 300mb then its show u 300mb unloucate show .. then make folder andboot and put in androidinstall and update .. then put back ur sdcard in phone and on ... hold vol up and d-pad and then u see menu then sys on nand and second in data on sdcard partition then install system ... after its complete then again do install update then restart ur phoine with pin ..
put out ur battery and put out ur sdcard with phone and put ur card in pc with card reader and open open again paragon partition .. and make partition again only 300mb in ext2 which show u unallocated then put ur sdcard in phone then put battery back to phone .. and on then have fun .... i hope u will be enjoy ... and i using Not So Super Froyo [RLS18] and its good for me if u need my setting then i will send it ....

if you use atools you can select the correct partition for SYS and DATA and you can avoid to create and delete the partition.

thanks but i dont know how to use atools bcos they show me .. sd partition p2 ,p3 .p4 but i dont know what is p2 p3 p4 partition .. if u giude me then i will be thankfull to you .. can u guide me how to use swap partition ?

loveyounw said:
thanks but i dont know how to use atools bcos they show me .. sd partition p2 ,p3 .p4 but i dont know what is p2 p3 p4 partition .. if u giude me then i will be thankfull to you .. can u guide me how to use swap partition ?
Click to expand...
Click to collapse
i try to do like you .
system on nand,data on sd
but it's so slow!
i just fell it's slower than both on sd.
I have tried to partition my SDcard.but its slower than install the android to a IMG file.It's so strange.can you tell me why?

hi buddy
thanks .. well i tell you what i did ... my use atools and i make my phone 450mhz and i also use swapper 2 its good and its 64mb ... its work fine ,,, but in first 20 mins its work slow after its work nice ... bcos every thing save in sd , data ,setting,etc.. i play fifa 10 and caligocha ,3d homebattle its work nice ... but first time its work slow after its 1mins its work fast ....oh u need one thing more which make ur phone more fast ... its ADWlauncher ex .. its very good ...
and can u tell me which sd card u r using ?

What is the problem with partitions?
If you divide the sd in several part you will have partitions.
First partition is in fat32 and you can't install system on it.

l1q1d said:
What is the problem with partitions?
If you divide the sd in several part you will have partitions.
First partition is in fat32 and you can't install system on it.
Click to expand...
Click to collapse
I'm just wondering why install system on a EXT2 partition is slower than on fat32.
I tried many times,but fat32 is always faster than EXT2.
This is very strange.
And,i flash your latest NBH file which release in the January 13.
I meet some problems.
it stop at
"install modules to kernel"
"to sourceforge"
How to solve the problem?i never meet in the past.
thank you !

loveyounw said:
hi buddy
thanks .. well i tell you what i did ... my use atools and i make my phone 450mhz and i also use swapper 2 its good and its 64mb ... its work fine ,,, but in first 20 mins its work slow after its work nice ... bcos every thing save in sd , data ,setting,etc.. i play fifa 10 and caligocha ,3d homebattle its work nice ... but first time its work slow after its 1mins its work fast ....oh u need one thing more which make ur phone more fast ... its ADWlauncher ex .. its very good ...
and can u tell me which sd card u r using ?
Click to expand...
Click to collapse
i use a 4GB class4 card,
of course,it will become fast after a few minutes.
but FAT32 is truely faster than EXT2.
I don't know why.
I always think running system on a virtual partition(IMG file) is slower than a real EXT2 partition.
But maybe I was wrong.

the image on disk should be slower so it's a bit strange.
You forgot to install modules (look in atools mixer or in this thread)

l1q1d said:
the image on disk should be slower so it's a bit strange.
You forgot to install modules (look in atools mixer or in this thread)
Click to expand...
Click to collapse
Thx!
I have read the post,but i don't found that what i should do.
please tell me what should i do ,thank you !
And,i have another problem,
I usually lost data,when NAND.
when android is crash,i push the Reset hole,
Than,I may not enter the system,get a lot of FC when see the desktop,or found that some software is lost.
Do you have this problem?
um..can you understand what i am talking about?
my english is so poor,Please forgive me

Can you upload all files i need for it and explain i got pola 200 to, and wonna try it, if that isnt to much work for you thx

@我是春哥: the loss data problem is now the big problem and there is one developer who is working on it.
in order to fix "install module" download the androidupdate.tgz from the thread (or sourceforge)
put it in /andboot (sdcard)
go to atools (bse) select your sys location and select apply update.
save the install-seq.sh
put it in /anboot
insert the sdcard in the phone
boot the phone.
OR
put it in /andboot (sdcard)
insert the sdcard in the phone
boot the phone
press dpad
on menu select apply update
and then quit
@damir1987: follow the step by step guide.

l1q1d said:
@我是春哥: the loss data problem is now the big problem and there is one developer who is working on it.
in order to fix "install module" download the androidupdate.tgz from the thread (or sourceforge)
put it in /andboot (sdcard)
go to atools (bse) select your sys location and select apply update.
save the install-seq.sh
put it in /anboot
insert the sdcard in the phone
boot the phone.
OR
put it in /andboot (sdcard)
insert the sdcard in the phone
boot the phone
press dpad
on menu select apply update
and then quit
@damir1987: follow the step by step guide.
Click to expand...
Click to collapse
thank you!
Before the problem be solved,i would not flash the android to nand.
I hope you can solve this problem，
Thank you for all you hard work!

why i intall system on nand bcos its safe and we dont loss our system file and its good otherwise our systam is crash and its not good things .... well my advise is this we use systam on nand its make ours android fast and safe and data on install on sd card what ever u like its img or ext2 its all up to you ... but its all safe what i say ,, bcos i test too much .... bcos when our systam android is crash its crash all things ,,, i hope u all understand ... fast boot is slow but in two or 3 boot its faster ... but remumber one thing how much we install games and software its make android havay ... i prefrar to 2.6.25 kernel ... bcos i play games and software its work fast ,.,, thanks you to all .. who try this ...

[Q] About ext Partition help!!!

Im realy new to this. I just rooted my phone.
Now from whath i understand thath you can install apps to the sd card if you Partition it,and you need a custom rom thath supports it (right??)
Now i saw on youtube thath you can Partition your sd card using rom manager.
my questtion is
1. is this a good way.cause i know there are other ways.
2.if i Partition trouth rom manager will i just be able to install a rom thath supports app2sd and thaths it.
3.if i do number 2 will i be able to install this rom and have app2sd(i really want it) ,,RCS MixHD v3.0,,
4.on the rom ,,RCS MixHD v3.0,, it says
,,,A2SD version - Fat + Ext3/4, 0.5-1.5GB recommended,, explain please

make partitions from recovery. it's the best idea for this operation. also you can install link2sd from market. it's ap2sd menager with GUI.

just a word of advice, backup up all your apps, (apks and data) and also your media files before partitioning (just in case)
mybackup or titanium backup are both good.
-Dan

To make partition easier , try partition wizard , u can get it from download.cnet for free . Please note that this is for pc , not android phone . The reason why i would recommended you to use this is because you can resize your FAT partition and make a ext2 partition instead of format your FAT partition . Generally , you won't loss any data on your sdcard with this method . For moving app to sdcard , just use link2sd which is available at market as well as in this forum , just simply search for link2sd . This app is awesome as it lets you to choose app that you wish to move . I didn't change my rom and it works fine so far . Give it a try !

nikctsh said:
To make partition easier , try partition wizard , u can get it from download.cnet for free . Please note that this is for pc , not android phone . The reason why i would recommended you to use this is because you can resize your FAT partition and make a ext2 partition instead of format your FAT partition . Generally , you won't loss any data on your sdcard with this method . For moving app to sdcard , just use link2sd which is available at market as well as in this forum , just simply search for link2sd . This app is awesome as it lets you to choose app that you wish to move . I didn't change my rom and it works fine so far . Give it a try !
Click to expand...
Click to collapse
BUT this work ONLY with internal sdcard, not with ext card like the man said
i know that i am looking for a solution since 2 weeks and no way as i seen

Obviously one of the great reasons to root is to "trick" the phone into believing it has more internal mem/move apps to the sd card. I have am first time droid user and am running into limitation issues already. Question then:
is it necessary to partition sd card manually (I am not extremely tech savvy and seems very complex) or is it possible that installing a custom rom (i.e. megatron) partitions the sd card when installed.
Thanks for patience, I would really like to take advantage of this, but can't really find a straight-forward instruction/advise.

help with darktremor a2sd

i really don kno how to use the a2sd on fitdroid v2.0
can someone plz help?

Dude, ull first have partition your sd card. Then only u can use darktremor apps to sd. To partion your sd card, go to recovery mod>advanced>partition>and then select the size of partition. Atleast 512mb of partition is recommended.
After doing that,reboot ur phone and now a2sd should work without any issues!
Feel free to ask if u still have any problem
sent from my galaxy fit + CM7 using xda premium app

try help
alaric.m said:
i really don kno how to use the a2sd on fitdroid v2.0
can someone plz help?
Click to expand...
Click to collapse
maybe this coud help you
IF U WANT DARKTREMOR A2SD TO WORK THEN U HAVE TO PARTITION UR SDCARD.
TO PARTITION FIRST TAKE BACKUP OF UR SDCARD AS IT NEEDS TO FORMAT UR CARD WHICH WILL ERASE ALL UR SD CONTENT.
IN CWM MENU GOTO ADVANCED MENU.
SELECT PARTITION SDCARD.
SELECT SIZE U WISH(512 or above) AND SELECT 62 or above AS SWAP VALUE.
WAIT FOR SOME TIME AND RESTART UR DEVICE....
TO CHECK A2SD WORKING OR NOT GOTO APP DRAWER MENU AND OPEN A2SDGUI APP AND CHECK APPS ARE ON SD IS ENABLED....
if it is active, you can move the Dalvik cache to sd card by selecting the Dalvik cache on SD-EXT and press Move button and reboot phone
sory for my language

tried that, did not work
Bhocan said:
maybe this coud help you
IF U WANT DARKTREMOR A2SD TO WORK THEN U HAVE TO PARTITION UR SDCARD.
TO PARTITION FIRST TAKE BACKUP OF UR SDCARD AS IT NEEDS TO FORMAT UR CARD WHICH WILL ERASE ALL UR SD CONTENT.
IN CWM MENU GOTO ADVANCED MENU.
SELECT PARTITION SDCARD.
SELECT SIZE U WISH(512 or above) AND SELECT 62 or above AS SWAP VALUE.
WAIT FOR SOME TIME AND RESTART UR DEVICE....
TO CHECK A2SD WORKING OR NOT GOTO APP DRAWER MENU AND OPEN A2SDGUI APP AND CHECK APPS ARE ON SD IS ENABLED....
if it is active, you can move the Dalvik cache to sd card by selecting the Dalvik cache on SD-EXT and press Move button and reboot phone
sory for my language
Click to expand...
Click to collapse
hi, i tried all of this as you mentioned...
eventually, this darktremor a2sd stopped my apps from being moved at all and it kept on saying that i don't have enough memory... though i know i should have... any thoughts??

Okay, a question from me...
Is it possible to have this swap setup in the stock gingerbread rom (ddkq5)???
Can anybody give a step-by-step tutorial, or maybe just a link, along with a list of all the necessary apps/other stuff that will be needed..??
I have a 16gb memory card in my galaxy fit...
Sent from my GT-S5670 using XDA App

I run Creed´s ROM 1.5 and there is also Darktremor included.
I thought SD was automatical formatted with ext4 by installing it. So I am a little puzzled to see, that moving to SD does not work as well as swap option.
Could you tell me, what is the matter?^^
Edit: Found out by my own, followed the same steps as mentioned above for FITDroid. Works on Creed´s ROM 1.5 as well. Only Disadvantage I found was it reduces my 8GB SD to 4096MB (couldn´t select higher at CWM) also after moving Dalvik, system boot seems to loop .. had to recover (good I did before )

[Q]why dont i have no more space????:(

hi there i have installed a few roms and now my phone space is gone i dont have everything i cant install apps from market and stuff :S and i am running kyorarom (v0.5.2 jpu) and i cant update it becuase i dont have free space on my intern memory how can i fix this or how do i great more space???
i have installed a other rom kyrillos rom 9.5 and still have the same problem annd when i reboot my phone all i need to do settings al over agian but still i dont have any space could someone help please ?

Ganoess said:
hi there i have installed a few roms and now my phone space is gone i dont have everything i cant install apps from market and stuff :S and i am running kyorarom (v0.5.2 jpu) and i cant update it becuase i dont have free space on my intern memory how can i fix this or how do i great more space???
i have installed a other rom kyrillos rom 9.5 and still have the same problem annd when i reboot my phone all i need to do settings al over agian but still i dont have any space could someone help please ?
Click to expand...
Click to collapse
Did you wipe data? Also if it doesn't work, sear h around for a zerofill.tar to flash, then flash a rom over it.
Sent from my GT-i9003 powered by MIUI

bscraze said:
Did you wipe data? Also if it doesn't work, sear h around for a zerofill.tar to flash, then flash a rom over it.
Sent from my GT-i9003 powered by MIUI
Click to expand...
Click to collapse
do you no where i can download it?
i already found it an read good stuff of it thanks for the help

use your sd card for more space
zerofill tar sounds to me like:
writing lots of "0" to the internal sd?
-> equal to a format of /system?
-> system is gone, mobile doesnt boot
-> all data lost?
Checked the features of kyorarom and what do I see...
Hybrid Data2SD and SD card swap
Why dont you use that feature?
Ah... I see... you didnt create an ext4 partition?
Thsi partition is needed for the feature above!
how to:
Create an ext4 partition via CWM
using this feature will move all user apps to sd card
have a fast card on your side and make a backup of your sd card data
-> all data will be lost on sd card when you repartition your card!!!!!

I think u r facing 0.0kb internal memory bug... if so flash with data.rfs
If not, go to recovery, wipe dalvik cache... format sd ext.. mount data... and mount sd ext
Sent from my GT-I5800 using XDA App

austin266 said:
I think u r facing 0.0kb internal memory bug... if so flash with data.rfs
If not, go to recovery, wipe dalvik cache... format sd ext.. mount data... and mount sd ext
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
yeah i have that problem i can solve that with zerofill.tar right ? or do i need something els?

qaysedcftgb said:
zerofill tar sounds to me like:
writing lots of "0" to the internal sd?
-> equal to a format of /system?
-> system is gone, mobile doesnt boot
-> all data lost?
Checked the features of kyorarom and what do I see...
Hybrid Data2SD and SD card swap
Why dont you use that feature?
Ah... I see... you didnt create an ext4 partition?
Thsi partition is needed for the feature above!
how to:
Create an ext4 partition via CWM
using this feature will move all user apps to sd card
have a fast card on your side and make a backup of your sd card data
-> all data will be lost on sd card when you repartition your card!!!!!
Click to expand...
Click to collapse
i think i stay with kyrillos never had problems with it only when i installed kyrorarom i got the bug from 0.0kb internal memory bug

hmm when i put my sdcard in it and reboot my phone says 0.0kb internal memory when i reboot without sdcard i got 100mb free agian so i dont no what to do

put the sdcard in PC and check the card if its working
backup data
delete all partitions on sdcard
put card in mobile
boot into cwm
repartition the card
check the space
just a thought:
could it be, that the sdcard is only full?
or defective?

qaysedcftgb said:
put the sdcard in PC and check the card if its working
backup data
delete all partitions on sdcard
put card in mobile
boot into cwm
repartition the card
check the space
just a thought:
could it be, that the sdcard is only full?
or defective?
Click to expand...
Click to collapse
The sdcard works fine i can see all my stuff when i have it in my phone but i wil try that empty my sdcard and i will make backup from it to my pc i hope this works

oh... a second please...
I remember something right now...
In my very early days (ECLAIR flashing) I remember that someone had also space 0.0 MB
And afaik the solution was to flash the CSC file (?) or something like that again...
That was the reason in these days why I flashed all (!) firmware versions from
xxjg7 to xxjk1
well... in froyo days...
I know that this posting is not very helpful, but you might find something similar with these hints in the net...
Hope this helps forward

Flashing zero fill should solve to 0.0kb problem, it formats everything on your phone, then flash a rom over it. If doesn't work, backup your SD card and format your sd ext and your whole SD card.
Cheers
Sent from my GT-i9003 powered by MIUI

my problem is fixed i forgot to format data en sd-ext thanks all for youre help and now i am busy with multiboot and stuff got a lot af roms to try

help needed for cm9.1...

thanq for viewing ma thread.. i moderate noob cz i researched many things about rooting, flashing, etc., but still i have some confusions..
basically i rooted my htc explorer with jaggy rooting tutorial. so now i want to flash with [DEV][ROM][ICS][4.0.4][IMM76L]Unofficial CyanogenMod 9.1 for Pico Build#9 {3/11/2012} rom.. buti have somedoubts pls kindly clarify me..
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
2. now i have Yannou's recovery..can i flash thru that..
3. before flashing should i partition ma sd card or can we do dat after flashin?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 rom zip file to sd card.
4. i read that partition can also be done with recovery menu.. is that true. if yes. how to do that.. i read partition for s2e(http://forum.xda-developers.com/showthread.php?t=1859691- here) what about link2sd.. can we partion for link2sd by(http://forum.xda-developers.com/showpost.php?p=29724634&postcount=3 ) with that can we do.. will it work for cm9.1.
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
First time installing CyanogenMod 9 to your Htc Explorer/Pico, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your SDCard
- Boot into Recovery
- Flash CM9 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore data using Titanium Backup! they might cause FC's
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! (metioned in http://forum.xda-developers.com/showthread.php?p=29938916) or (http://forum.xda-developers.com/showpost.php?p=33608084&postcount=2897).
please help me.. waitin for ua valuble reply..

Guide
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise

bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
Click to expand...
Click to collapse
did u use CM9.1 .
is flashing process is same for yannou’s recovery.
i know about yannou’s recovery.. but what about CWM recovery.. from where i can get dat.. cus jaggy flashing process providing only yannou’s recovery.. so how can i shift to CWM recovery..

bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
is it necessary to wipe dalvik bcause i didnt do it and it works fine
Click to expand...
Click to collapse

No, no, stick with yannou's! Official cwm sometimes give's mounting issues with our phone, and sometimes if you drain fully your battery you'll get in to adventure.
Yes flashing process is the same, basikly everything is the same as cwm

Install ROM Manager on your phone and the first option should be to install Clockworkmod Recovery. Follow the instructions on screen. I'd use yannou's recovery though.
Yes, the instructions are the same for yannou's recovery.
And yes, I've used cm9.1 for over 2 months. I'm using HTC sense 4.0a rom by derefas right now
Remember to hit the thanks button! It won’t hurt, I promise

cool
shree alwaz said:
thanq for viewing ma thread..
Click to expand...
Click to collapse
Here is my opinion and instruction
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
Click to expand...
Click to collapse
I am not sure about the build #9 but build #11 is really cool.. Here is the link. U also get the link form the post u mention above under the page 305
http://teamthundersquad.blogspot.in/2012/11/cm-9-nightly-build-11-for-htc-explorer.html
But as far i heard nothing wrong with build#9 too. So try both..
Click to expand...
Click to collapse
2. now i have Yannou's recovery..can i flash thru that..
Click to expand...
Click to collapse
Nothing serious with this matter. Almost all recovery will work with this ROM. But my opinion is use TWRP recovery, it provide lot of feature also its provide touch support and ext partition support also....
Click to expand...
Click to collapse
3. before flashing should i partition ma sd card or can we do dat after flashing?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 ROM zip file to SD card.
Click to expand...
Click to collapse
its depends upon Ur need man. If Ur going to use internal memory increasing script u must have an 2nd partition in Ur SD card. ext2/3/4 is depend upon the memory script and ROM Ur going to use..
My Suggestion:
Try m2sd script with ext4 partition its work like a charm.. but i read from some post ext4 will damage SD sooner. but perform better. i am always need performance. but i am sure that till now no damage or performance issue occurred in my SD card as well as phone.
before or after partition is ur choice when u need partition u do it. But some ROM need 2nd partition while flashing be careful on that but cm9.1 doesn't need any support from sd card
Click to expand...
Click to collapse
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
Click to expand...
Click to collapse
Both the instruction telling the same thing for u. Here is my guide as same like they stated...
1.copy Ur ROM and GAPPS zip to ur SD-card
2.wipe all the partition data,cache,system,dalvik,etc... except SD-card
3.install ROM zip then install GAPPS zip.
4.Then reboot..
5.wait until u get the home screen.. first boot take some time so be patient
6.After that leave Ur phone for a minute then once again restart Ur phone.
7. final but important click thanks to the Developer and other who help u to install the ROM successfully..
this instruction is for clean installation this will never lead Ur device to problem
Click to expand...
Click to collapse

thanq u all.. but i have some clarification about partiton only.. can anybody give me guide about partitons for CM9.1 . which is best, simple and error free, wheather to go partition then flashing or flashing then partition.. and plz give me guide thru recovery.. and where its pre or post flashing.. pls do needful..

edit :
im unable to figure it out abot s2e scripts, int2sd scripts.. so please tell me actually what are those and how the linked with ext2/3/4 partitioms..

Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app

As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.

vasanth3008 said:
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Can u explain what are those sd scripts. What it'll do with the partition. Plz explain me.
Sent from my HTC Explorer A310e using xda app-developers app

tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app

shree alwaz said:
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.

tatiraju.rishabh said:
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
Click to expand...
Click to collapse
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app

Nobody don't know about ma query. Help me guys.
Sent from my HTC Explorer A310e using xda app-developers app

tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera

help
please temme. today i wanna flash the cm 9.1. plz temme which is best built9 or 11.. what do u people say which is best for daily use, all things should work, games should support like backstab, shadowgun, nfs mostwanted like that.. and it should not drain fast.
n i wanna make partition of ma 8GB class4 sd card before flashing using mini partiton tool. so which is best ext2/3/4 or fat32. n which is best link2sd, mount2sd or anything else. and i no need to create/modify/change the mounts for those apps to use.. cz im not able to figure out what is that mounts acctually. n what is the use of those mount. if anybody explains about those im very much gladful.
n before partition i need to take backup.. it mean i need just copy paste the all the folder which are there in sd card.. its that correct or any method to use.. to get backup.
finally give me exact intraction to flash.. consider i had partiton sd card..
pls help.. ill make flash n wanna eat icecream sandwich today it self.. :crying:

ZaKa123 said:
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
Click to expand...
Click to collapse
I never had any of those problems.
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
shree alwaz said:
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I never used Mount2SD and never will, cos link2sd works well for me.
Here is what i did:
1. Partition microSD with format ext2. (I used Minitool Partition Wizard for this. A freeware program for Windows)
2. Insert it in the phone, download Link2SD from Play Store.
3. Open Link2SD, it will prompt you to select your partition type. Select ext2.
4. Link2SD will create a mount script and ask you to restart the phone. Do so.
5. After restart, go back to Link2SD, press menu button to open menu.
6. Open "Settings". Make sure "Auto link" is ticked.
7. Exit Link2SD, do a restart.
Thats it! now whenever i install an app, Link2SD sends it to the partition automatically.
Sometimes you may get a phone memory full notification. In that case power off your phone and on it again.
EDIT: all this was done with CM9.1 previously installed.

So what are steps to install cm9.1.
Is it necessary to clear dalvik cache.
Sent from my HTC Explorer A310e using xda app-developers app