[Q] ActiveSync Connection Problem (Omnia i900) - General Questions and Answers

Hi everybody, i'll try to explain problem with my bad english and will be grateful for any help in advance. So, i have Omnia i900 Version PDA: i900XGI3/tom33 BHIC2 (in case, if its necessary to know), the original firmaware i did replaced very long time ago, because of programm memory capacity (as known ).Everything was ok utill now. Recently i have problem with ActiveSync. Most of the time, when i conect phone to computer, ActiveSync starts and than when synchronization should begin phone turns off, rather endless restars until PC says unknown hardware, but sometimes its conecting after many restartes. For a while ago, it could still conect somehow, but now never anymore and even more, now after when i conect, most of the time computer also restarts together with a phone.Must also to say, that i was not installing or changing nothing at all, its just suddenly happend.I cant find even one solution in internet regarding that sort of problem. Any ideas, suggestions? Thanks

Related

Cannot Sync with Vista

Dear all,
Thanks for all your effort that I can avoid to throw away my DOpod900. recently I download
CEOS5.2.1708(Build 18505.0.7.0)
ROM 2.07.00WWE
Radio 1.18.00
Protocol 42.56.P8
Also I install CE-STAR to be able to use T-Chinese & Japanese.
AT the beginning it's working well although hung-up quite frequetly but recently does not hung-up but I cannot sync with my Note-PC(Vista), I un-plug and plug many time but Activesync does not activate and even I re-boot the Dopod900 or re-boot my PC but still the same.
I cannot sunc with my PC for over 2 weeks and many schedule cannot confirm from Dopod900. please if anyone know how to fix this problem, please help !!!!
Regards

Mda compact with serial v1.02 screen

Hi everyone.
After much searching I seem to have got nowhere. Can someone please help.
My mda compact 2 starting playing up yesterday, rebooting on its own, so I tried to install the upgrade from tmobile (ruu charmer). The upgrader stopped and my mda now has a screen that only either says serial v1.02 or usb v1.02.
I've tried rebooting it several times in several different ways without any joy, the screen just remains the same. I tried connecting to my laptop via active sync, but its like it doesn't exist anymore!
I'm about to give up after hours of trying to fix it, so any assistance in very simple terms would be much appreciated!
problem solved
Seems like my problem must have been too basic or too common for anyone to bother to help, so I did some searching myself throughout this site and elsewhere.
However, what I found was thoroughly misleading and unhelpful.
The error messages are also inaccurate and totally misleading. Error 274 might mean pc can't connect to pda, but it also means other things, like your using the wrong upgrade firmware!!. Having serial v1.02 or usb v1.02 on your screen does not mean its a grey and black brick(useless), its simply the upgrade mode screen.
Basically, I made an error in choosing my upgrade. I chose the wrong firmware package from t-mobile thinking what I had was a mdacompact 2, when it actually was just a mda compact. This error was the main issue, yet from this forum I had the idea it could have been a number of things.
One important thing to remember is adhering to all the instructions regarding the installation of the new rom.
Don't bother unless you do the following:
1) Make sure you have a good connection via cradle or usb lead when doing the download.
2) Make sure you close all unnecessary programs on your pc.
3) Dont touch either your pc or the mda during installation.
4) Don't give up after you read misleading rubbish on the web.
5) Make sure you download from the web the correct upgrade firmware!!(very important in my case!)
6) Active sync is not totally necessary during the process.(I turned off usb connection in its setting during my installation).
Hey
I have the same Problem
i tried updating the software on the phone but now i get that screen..
Im still stuck on what exctly to do, I've been googling it for hours!! HELP!!!
matty x

Activesync of Outlook stopped working

For no apparent reason, Activesync (4.5 5096) of Outlook on my TC (standard ROM see below) has stopped working. Outlook email/contacts/diary not getting synced.
After plugging USB in a message says 'Sync cannot be connected succesfully...try again... and run troubleshooting..'. But Activesync/Help/Troubleshooting/Reporting says there is nothing wrong! Indeed, I can still explore TC and card, sync other software (e.g. Media Player, TomTom Home, eWallet etc).
But I can't get in to the ActiveSync/Options menu to check out the relationship. Have soft reset TC, turned off PC firewalls etc, but nothing helps. Little puzzled because it all worked fine for the past 2 months and I wasn't even playing around when it decided not to work!
Any ideas please?
Thanks,
CI
Touch Cruise
ROM vers: 1.25.405.1 WWE
ROM date: 12/11/07
Radion vers: 1.58.21.23
Protocol vers: 25.65.30.04H
had the same problem some time ago. changed the cable and everything was fine.you could also try uninstalling and reinstalling activesync.
Jackster
Thanks. Cable was OK, but uninstall/reinstall of activesync worked. indeed speeded up activesync and fixed a lot of other minor secondary problems while it was at it would recommend it for all every now and then. strikes me that activesync is one of the those bolt-on bits of MS obeseware that needs regular maintenance?
USB Device not recognized
To mark the anniversary of me posting my original message, all of a suddden and for no apparent reason, Activesync has stopped working again. Bizarre
This time its a little different, I don't get anything except a pop message on PC saying 'USB device not recognized: One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance click on this message'. Which of course I di and it didn't help!
So, I've tried
- un-installing/re-installing Activesync 4.5
- rebooting PC and TC umpteen times
- changed USB port/cable
- tick/untick Settings/Connections/USB-to-PC/Enable Advanced network functionality
- putting the kettle on
Nothing is working (Although the cup of tea was nice
Would really appreciate some help please
Thanks
CI
Help! Really desperate on this one. I have been trying to think why this should suddenly happen. Two things possible:
- During my last succesful sync I received and answered a call. Would this damage registers or something?
- I accidently pulled the mini-USB headphone cable a bit while listening toi music. But the sound is still perfectly OK, and I receive power charge via USB even though it won't connect/sync. And like I said, I've swapped cables/ports.
I've Googled this a lot and most people fix by fiddling with stuff I have already done and praying!
Please. Anyone got any ideas before I too start praying!
Thanks
1. No, it should not. Never heard it did.
2. AFAIK, not reason as long as it charges trough USB port.
Try to delete device from Active Sync while device is not connected. You might need to restart PC.
You'll have to set options again when device is recognised.
This is what I have to do often.
Also, check device name on device itself, it tends to change from time to time for no apparent reason (at least to me). If it changes, it causes following problems to me:
1. Active Sync troubles
2. BT connection to car audio stops working.
Hope some of this will help...
BTW... you have WM 6.0 on it? If so, don't upgrade to WM 6.1... IMHO, WM 6.0 is faster than 6.1 and has less problems with Active Sync...
Bodisson,
Thanks for suggestions. Alas, none work
It looks like I am going to have to hard reset and/or burn new ROM. For those of us who don't do this regularly, this can be a nerve racking experience. However, I was perhaps sweating too much about it for a couple of reasons:
- it seems very few people have anything good to say about WM6.1. Until now I have been pretty happy with WM6.0 and have had 14 months of virtually trouble-free use, so maybe I'll just stick with that. I'm not a power-user, so the vast array of cooked ROMs is rather bewildering. Unless one is rock solid and aimed at non-power end-users?
- I thought installing a new ROM without Activesync was impossible, but I see someone has worked a way to do it via the SDHC card. Well done XDA
So, unless anyone has some further ideas I will just hard reset to WM6.0 and hope for the best. I have this terrible feeling though that my mini-USB port is damaged and I'll get the same bubble of doom even after hard reset.
Thanks
Either do a hard reset back to factory (and hope you can re sync all your stuff with the PC),
OR
Re flash the rom to C Shekar's "b" rom. It really is very good, and transforms the phone. In fact, it is so good that I have finally stopped fiddling with my phone! (and I'm a born fiddler!)
It is very good, and works immediately, but you might need to spend time tweaking it - the must is to install the correct radio.
I've done quite a lot of rom upgrading, so am quite comfortable now with the process. If you want to do it and need a hand, let me know.
Have you tried to verify your firewall? Last time I had some Sync problems was just after updating my firewall that changed settings to default, blocking the Polaris-PC communication.
Have tried disabling all firewalls with no luck.
I've hit a brick wall on this one, but am fearful it will be hard to get device back to working order again if I do hard-reset and still can't sync
Suggestions very welcome
Thanks
New_Wizard said:
Have you tried to verify your firewall? Last time I had some Sync problems was just after updating my firewall that changed settings to default, blocking the Polaris-PC communication.
Click to expand...
Click to collapse
OK, I feel for you on this one!
If you don't want to flash to a new rom (or, re flash to your old one), there is a solution but it involves removing and renaming your Outlook.pst file ... the procedure (which is on this site somewhere) seemed fraught with danger, to me, so i preferred to re flash when i had a similar problem.
Before re flashing, if you decide to, you backup your data using PIMBackup - only your contacts and maybe phone call list, not anything specific to the phone's operating system or software.
Re flash, then restore the data.
Then, Active Sync will see the phone as a completely new system.

USB connection not working. :confused:

Hi, a few days ago i bought a TREO 750, with WM5 running, everything seems to work fine but when i tried to connect it to the PC nothing happens besides start charging , does not appear the plug n play assistant on the pc or anything else.
I tried to upgrade from the memory card but nothing happens and when i get into the flashing mode does not appear the "USB" connection mode, on the screen.
What can i do?? , any advice could help me.
Thanks in advance
http://forum.xda-developers.com/showthread.php?t=659125
startngate tks man, but there is no solution on that post so i'm asking for any other sugestions
thanks again!!
Same here ... it used to be that it would work now and again if I unplugged/replugged enough times but since I updated from 5.2 to 6.0 it doesn't work whatsoever. I really want to upgrade to 6.1 or 6.5. =/

[Q] Error Code: 80072EFD

I have HTC MOZART, NODO Build, unbranded in indonesia.
Now my question is, once every 2-3 weeks, I got his kind of error. Basically The internet connection is gone when this happens, and I cannot update anything, unless of course I connect to zune in my laptop and use usb for internet connection shared from the laptop.
The only way to fix this AFAIK is by restarting the device (or remove the battery, and put back in)... hold the on button until off and turn on again is suffice though....
I dont mind restarting the phone within that interval, it is just weird and I tried to google and looked it up everywhere, I have not got the right explanation. Restarting the phone WORKS every time btw.
Anybody knows what this error is?
UPDATE:
I see that many others experience this and still no answer
http://answers.microsoft.com/en-us/...83cf0108/95bb01b5-9357-e011-8dfc-68b599b31bf5
Thanx

Categories

Resources