Cognition help - Captivate General

I switched over to cognition and noticed I didn't have any of my contacts. So then I flashed back to my old rom and the phone wouldn't boot. It stayed at the world phone screen. I can get to download mode and when I try to use odin it says check image path. I tried the reset and still no luck. Any ideas?

Ok, I reinstalled cognition and my phone is working so never mind I forgot that i had a vcard with my contacts so i just used that. But I do want to know the safe way to flash back to a rom. If you could explain the steps I would appreciate it. Thanks in advance.

Odin OneClick and Clockwork Mod Recovery are the norm.

Since this is the cognition help thread, I will post here....
I tried to install cognition 3.0 using CWM. But I keep getting error at Line 15. Do I need to install a new kernel. I don't even know what Kernel I am using so I would assume stock. If I do need a new kernel could I be directed to the proper thread.

Re-download Cognition 3.0 from Designgear's site. Something sounds fishy with your install. You should NOT have to install a new kernel. The Cognition zip package contains everything you need to flash your phone, and have it fully operational.

inc0gn3gr0 said:
Since this is the cognition help thread, I will post here....
I tried to install cognition 3.0 using CWM. But I keep getting error at Line 15. Do I need to install a new kernel. I don't even know what Kernel I am using so I would assume stock. If I do need a new kernel could I be directed to the proper thread.
Click to expand...
Click to collapse
yea worked perfect 4 me i followed there youtube vids worked like a champ only trouble i had was u need 2 dismount sd card 2 push root phone. and it doesnt cover that.

Related

[Q] Can't load any ROM's---PLZ HELP

So i am running cm6 currently on phone. I seem to recall erasing the stock rom when installing another program on the phone as this is what it asked me to do (can't remember which program). Anyways I have downloaded at least 5 other roms I wanted to check out and everytime I tried to load one it says E:/ bad and something about the directory. I can run cm6 with no problem and it always lets me restore into my nandroids. Anything I can do. I was trying to go with a stock, rooted rom to run sprint football live but can't get anyhting to work. Any help is greatly appreciated.
What recovery are u using? try updating to 1.7.
Sounds as if you may be using Clockwork, try flasing a different recovery. I use Godspeed and it cuts down the time and never lets me down. Here is a link to the image as well as abd instructions on how to install it on your Hero.
http://forum.xda-developers.com/showthread.php?t=672324&highlight=recovery
Good luck
cboyfan2020 said:
So i am running cm6 currently on phone. I seem to recall erasing the stock rom when installing another program on the phone as this is what it asked me to do (can't remember which program). Anyways I have downloaded at least 5 other roms I wanted to check out and everytime I tried to load one it says E:/ bad and something about the directory. I can run cm6 with no problem and it always lets me restore into my nandroids. Anything I can do. I was trying to go with a stock, rooted rom to run sprint football live but can't get anyhting to work. Any help is greatly appreciated.
Click to expand...
Click to collapse
yeah thats a great idea, use godspeed or open rom manager app and scroll all the way to the bottom then choose flash alternate recover and flash 1.6.2 recovery. and when u download new roms to flash, after u transfer them to your phone make sure you hit eject before u just pull or yoink it out ur comp.

[Q] it is possible to...

Sorry, I'm new to this so sorry if this seems dumb.
So i bought the phone from rogers and immediately updated to froyo 2.2 official release by rogers/samsung.
I read about all the hype online about rooting and custom roms so i decided to give it a shot.
I used the superoneclick method to root my phone and it was successful.
I then used "rom manager - clockworkmod" and created a restore file before i did any flashing to my phone.
after creating a backup, i went on and flashed to the cognition 3.04.
Now my question is. Am i ever able to get my phone back to its original rom, kernel, and modem? the reason i want to know is because i might need to get my phone replaced due to some technical issues with the phone.
Also, does the backup of my phone after rooting play a part in any of this? if so, how?
Im sorry if there is already a post like this one. Its just that i couldn't find the answer through all the hundreds of pages of threads and replies, so I thought it would be easier to post a here with my specific question. Thanks.
regards,
danny
dsu said:
Sorry, I'm new to this so sorry if this seems dumb.
So i bought the phone from rogers and immediately updated to froyo 2.2 official release by rogers/samsung.
I read about all the hype online about rooting and custom roms so i decided to give it a shot.
I used the superoneclick method to root my phone and it was successful.
I then used "rom manager - clockworkmod" and created a restore file before i did any flashing to my phone.
after creating a backup, i went on and flashed to the cognition 3.04.
Now my question is. Am i ever able to get my phone back to its original rom, kernel, and modem? the reason i want to know is because i might need to get my phone replaced due to some technical issues with the phone.
Also, does the backup of my phone after rooting play a part in any of this? if so, how?
Im sorry if there is already a post like this one. Its just that i couldn't find the answer through all the hundreds of pages of threads and replies, so I thought it would be easier to post a here with my specific question. Thanks.
regards,
danny
Click to expand...
Click to collapse
Follow this link: http://forum.xda-developers.com/showthread.php?t=731989
It guides you through the process of going back to a stock ROM. Btw, I've used it and it works.
Good Luck!!
Christo_69 said:
Follow this link: http://forum.xda-developers.com/showthread.php?t=731989
It guides you through the process of going back to a stock ROM. Btw, I've used it and it works.
Good Luck!!
Click to expand...
Click to collapse
Dont use that link because it is for att firmaware. I havent seen any prepackaged odin one click for rogers.
This is my captivate. There are many like it buy this one is mine.
Christo_69 said:
Follow this link: http://forum.xda-developers.com/showthread.php?t=731989
It guides you through the process of going back to a stock ROM. Btw, I've used it and it works.
Good Luck!!
Click to expand...
Click to collapse
Thanks for that. Do you think Odin is the only way to do it or do you think i can use clockworkmod
flashman2002 said:
Dont use that link because it is for att firmaware. I havent seen any prepackaged odin one click for rogers.
This is my captivate. There are many like it buy this one is mine.
Click to expand...
Click to collapse
Do I not use that link in general, or just not to use the firmware given at the bottom? the steps are correct though, no?
also from my searching.
i can put my phone back to my backup point (just after rooting) through clockworkmod. Woud this change my rom back to stock from? how about kernel and modem and all that? would that all get reversed back to my backup point? meaning it will basically be a stock phone. But I think also read somewhere that my kernel and modem does not get changed back to rogers original one. is there a way to do it?
I then found this link: http://forum.xda-developers.com/showthread.php?t=846501
that says i need the original rogers rom for the captivate by the links there no longer work for download. Also on that thread, it was mentioned that the AT&T logo will still come up on startup, which would not be a good idea if i had to send my phone in for warrenty.
I then looked at : http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I896
Here it tells me to flash to a i9000 before i reflash to a rogers firmware in order to remove the at&t logo. it also provides me with a link for the " Official Rogers Stock ROM ", but according to somebody on the first link i posted here, it isnt the "official rom"
Any ideas?
This is where I got the stock 2.2 file from http://forum.xda-developers.com/showthread.php?t=905042.
Edit: I have flashed a bunch of times and have never got stuck with the AT&T startup after flashing back to stock with the odin file.
Akalon said:
This is where I got the stock 2.2 file from http://forum.xda-developers.com/showthread.php?t=905042.
Edit: I have flashed a bunch of times and have never got stuck with the AT&T startup after flashing back to stock with the odin file.
Click to expand...
Click to collapse
Thanks. Do you know if my kernel is going to go back to stock too or is it going to remain the same as the custom rom one?
dsu said:
Thanks. Do you know if my kernel is going to go back to stock too or is it going to remain the same as the custom rom one?
Click to expand...
Click to collapse
If you use the odin file the kernal and modem will revert back to stock.
Akalon said:
If you use the odin file the kernal and modem will revert back to stock.
Click to expand...
Click to collapse
Thanks. So im assuming now that the only time my kernel and modem wont go back to stock is when i flash with CWM. correct?
I haven't tried using the CWM file in that link so I'm not sure if it contains the kernel and modem. As far as custom roms go most if not all come packaged with the kernel and modem of choice.
So.. When I do a "master clear" from http://forum.xda-developers.com/showthread.php?t=731989...
Would everything be wiped? I read somewhere that when you do a "wipe" from your settings it only clears user settings or something. What would a "wipe"
from the recovery menu do?
I flashed to a different rom today thinking it will help my battery issue. When i am flashing from one rom to the next, i do a restore back to my backup before i flash to a new rom. Is this the correct method? or am i supposed to wipe beforehand? The reason i ask is because this is my 2nd rom and my battery issue still seems to be there. I tried other methods of fixing hte battery but nothign seems to work. When i looked into root explorer, i see that there are a lot more files now everywhere, than when i first started. would some of them be from my previous rom? if so how do i remove them?

[Q] CWM Wont work and other aggravating problems- What can i do?

Hello, boy do I have a mishap. Well, anyway to begin I will say that I decided I wanted to root my phone to debloat it. So what I did, is downloaded the EE4 update and did the VooDoo V4 Kernel that flashes CWM and EXT4 and other junk. Well that all went great. I got it rooted and such but then just tinkering around I went into Rom Manager and told it to back up. WELL, when I did this the phone got locked on the SAMSUNG boot screen for hours and continued to refuse to boot. SO, I attempted to fix it by installing altered beast just to get the os running again and went into clockwork and backed it up. Then I went to the rooted ed1 to bring it back up to EE4 rooted and with the voodoo kernel and such but it refuses to open clockwork! The voodoo kernel changes filesystems and roots it and such but clockwork wont load. When I try to flash it in rom manager it says its succesful and then i go to reboot in recovery. It takes me to the Samsung Recovery 3e, I try to the update.zip, (yes i took the cwm recovery-update.zip and renamed it and through it in the sd card root) but all that happens is that a progress bar shows up for a split second then the android guy with the triangle and ! shows up and it does nothing. Help? I really need to back it up, preferably in the rooted ed1 but in ee4 will work to. Any ideas would be appreciated. I used odin v1.3 by the way. Im willing to try anything to get clockwork to boot so i can back it up. What do I do?
EDIT: Also, now when I go into 3e recovery, it complains saying " cant mount /dev/block/mmcblk0p3 " or something like that.
Did you read anything on this forum beforehand? Or just go link by link downloading files and deciding what to try on your phone?
Just saying..
Yeah, I did. Ive searched everywhere. I cant find anything about my problem. Ive looked at things that are close, hoping a solution can be found but nothing and no I wasnt just downloading files and spoon feeding them to my phone.. I just wanted to be able to debloat it.
Go search about Rom Manager and let us know what you find out...
I dont see how thats going to get me one step closer to solving my problem. Ive done the searching, now im asking.
Start w/ this one. http://forum.xda-developers.com/showthread.php?t=1100384
I can't tell where you are currently on your phone from reading that as it's to much text in one paragraph and it isn't put together in a logical sense and seems to jump around. I would look at the instructions for going to rooted EE4 in the Dev forum as that should get you to where you want to be with voodoo/cwm/rom
Instead of being a Forum Snob. If you know the answer, why don't you just help him out?
There's an abundance of confusing information on here and everyone uses acronyms. I too searched for hours on how to solve a similar problem and ended up having it taken care of for me. People join communities like this one for help. Not to get flamed for asking a question. It may be elementary to YOU but not everyone.
Thanks, for the care. Sorry about that if its jumbled, im frustrated with this because ive flashed the rooted ed1 about a billion times now, trying everything to get it functioning. Id be glad to try to explain again if that could help? Ah, yes. Well, I returned to the forum about installing the voodoo kernel. I followed the process word for word. But it just doesnt seem to want to work. Right now I just flashed it again back to the rooted ed1. Would I be able to put CWM on there at that point?
Jessman123 said:
Thanks, for the care. Sorry about that if its jumbled, im frustrated with this because ive flashed the rooted ed1 about a billion times now, trying everything to get it functioning. Id be glad to try to explain again if that could help? Ah, yes. Well, I returned to the forum about installing the voodoo kernel. I followed the process word for word. But it just doesnt seem to want to work. Right now I just flashed it again back to the rooted ed1. Would I be able to put CWM on there at that point?
Click to expand...
Click to collapse
Yes. But don't use rom manager. Use imnuts cwm recovery.
Sent from my SCH-I510 using Tapatalk
Alright, thanks. Ill try and use imnuts's cwm recovery. But if someone may answer a question, is the samsung bootloader unlocked?? My brother said thats something to know.
Jessman123 said:
Alright, thanks. Ill try and use imnuts's cwm recovery. But if someone may answer a question, is the samsung bootloader unlocked?? My brother said thats something to know.
Click to expand...
Click to collapse
Yes
Sent from my SCH-I510 using Tapatalk
so it is unlocked?? What does the exclamation triangle mean, when i try to do the update.zip from the samsung bootloader?
Oh and sorry if Im not getting this. Are you saying use a application that imnuts made? If so, could you be so nice to link it? Or a method he used? I looked for stuff but I didnt find anything other then what looks like a stock rom/kernel ed1 from him
I know how it is to be frustrated, but like they all said all of your questions have already been answered.
Here's my attempt to help:
Your problem lies in trying to flash CWR through ROM Manager, it currently doesn't play well with our phones. Word is that Koush (the creator) needs to update something for it to work with our phones. The bootloader is unlocked.
To flash imnuts' version of CWR, you'll need to use Samsung's leaked software called Odin - it's PC only. The alternative is Heimdall which is supposed to be cross-platform compatible, but the latest version is command-line only.
You have to find out if you've converted your system to EXT4 or if it's still RFS. That depends on if you have the Voodoo lagfix enabled or not. Check out the dev section and look for the titles that say [RECOVERY], [ODIN], [ROM], and/or something like "Get yourself to EE4 successfully".
A few links:
[HOW-TO] Get a rooted version of EE4
[RECOVERY][6-11-11]Clockwork Mod Recovery
[KERNEL][06-02-11] PeanutButta Jelly Time
Well, currently right now its rfs. Its the stock file system. What I was going to do, or did before, was to put it in download mode and flash the VoodooV4 Kernel. It roots the phone, and all that good stuff and is suppose to put the Voodoo recovery/cwm on there.
EDIT: Heres the proccess I followed before.
http://www.theandroidsoul.com/how-t...and-clockworkmod-recovery-installation-guide/
Jessman123 said:
Well, currently right now its rfs. Its the stock file system. What I was going to do, or did before, was to put it in download mode and flash the VoodooV4 Kernel. It roots the phone, and all that good stuff and is suppose to put the Voodoo recovery/cwm on there.
EDIT: Heres the proccess I followed before.
http://www.theandroidsoul.com/how-t...and-clockworkmod-recovery-installation-guide/
Click to expand...
Click to collapse
The recovery is a separate flash, both in odin. First the kernel, then Recovery.
Just follow here from the beginning, it should work for you:
http://forum.xda-developers.com/showthread.php?t=1122657
Well I have good news. I would like to announce that I have successfully installed CWM. I guess my phone just didnt like the other one or something. But following this link,
http://forum.xda-developers.com/showthread.php?t=1122657
I was able to get it installed. Now my only question is, I want this kernel http://forum.xda-developers.com/showthread.php?t=1092114 for my phone. But its not in a zip. Am I out of luck? Or do I not have to use CWM to install the kernel? Can I use odin and still be okay?
Jessman123 said:
Well I have good news. I would like to announce that I have successfully installed CWM. I guess my phone just didnt like the other one or something. But following this link,
http://forum.xda-developers.com/showthread.php?t=1122657
I was able to get it installed. Now my only question is, I want this kernel http://forum.xda-developers.com/showthread.php?t=1092114 for my phone. But its not in a zip. Am I out of luck? Or do I not have to use CWM to install the kernel? Can I use odin and still be okay?
Click to expand...
Click to collapse
You do need Odin to load that, but i'm wondering why you want to? Did you install the PBJ kernel following the instructions from the other link?
If you want to go down this route, be sure to apply the SD Card fix as well - you'll find posts about it.

[Q] Droid charge noob

I am a noob to rooting but I am learning quickly, due to my mistakes. I was able to successfully root my DC using Odin and the alterbeast md5, then I put the gummychargedFE2.0. After that is when thing went bad for me. I noticed that the version of clockworkmod did not work will so I thought I would install Rom manager from the AppStore I did that and installed the new version of clockworkmod. This did not work so I found a clockworkmod md5 and used Odin to load it up. That seemed to work just fine. But after rebooting I felt like the device ran to slow so I read several other forums and found out about voodoo lag fix and a GBE edition of gummy. So I decide to but those on with Odin. I put on the lagfix first and everything bricked after that. I started off with a red clockwm, then a yellow, then to a blue that read 'manual' and then I could not get any thing to work. So I did the unbrick tutorial and now my DC boots back up like normal again.
What I want to know how to successfully do is install a full functioning clockwm and then get a stable GBE rom and lag fix onto my DC. I noticed that in most of the tutorials I have read and watched it an getting confused with when something is to be performed via Odin or when it is to be performed via sd card install via clockwm.
Please help, I need to Get my DC running on a GBE root that is fast and stable, before 9pm cat today because I am being sent to several cities for work and need to tether for free.
I would also like to remove all my bloatware to if possible.
Thanks for the help in advance
oberonblaq said:
I am a noob to rooting but I am learning quickly, due to my mistakes. I was able to successfully root my DC using Odin and the alterbeast md5, then I put the gummychargedFE2.0. After that is when thing went bad for me. I noticed that the version of clockworkmod did not work will so I thought I would install Rom manager from the AppStore I did that and installed the new version of clockworkmod. This did not work so I found a clockworkmod md5 and used Odin to load it up. That seemed to work just fine. But after rebooting I felt like the device ran to slow so I read several other forums and found out about voodoo lag fix and a GBE edition of gummy. So I decide to but those on with Odin. I put on the lagfix first and everything bricked after that. I started off with a red clockwm, then a yellow, then to a blue that read 'manual' and then I could not get any thing to work. So I did the unbrick tutorial and now my DC boots back up like normal again.
What I want to know how to successfully do is install a full functioning clockwm and then get a stable GBE rom and lag fix onto my DC. I noticed that in most of the tutorials I have read and watched it an getting confused with when something is to be performed via Odin or when it is to be performed via sd card install via clockwm.
Please help, I need to Get my DC running on a GBE root that is fast and stable, before 9pm cat today because I am being sent to several cities for work and need to tether for free.
I would also like to remove all my bloatware to if possible.
Thanks for the help in advance
Click to expand...
Click to collapse
I would suggest the EP3HA Odin, then follow it up with the same version of CWM that's in the EP3HA thread. Be sure to follow the directions... nobody wants an expensive paperweight.
Sent from my SCH-I510 using Tapatalk
Thank you I will try that.
edwards2243 said:
I would suggest the EP3HA Odin, then follow it up with the same version of CWM that's in the EP3HA thread. Be sure to follow the directions... nobody wants an expensive paperweight.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
Are you referring to this thread?
http://forum.xda-developers.com/showthread.php?t=1293175
If so I see no instructions just a link and when it says flash, it says if you do not know what "flash" is, you should not try it.
I want to flash the EP3HA to my Charge, but I need to know if I uncheck the Auto Reboot, as I had to when I flashed the recovery.
chrstdvd said:
Are you referring to this thread?
http://forum.xda-developers.com/showthread.php?t=1293175
If so I see no instructions just a link and when it says flash, it says if you do not know what "flash" is, you should not try it.
I want to flash the EP3HA to my Charge, but I need to know if I uncheck the Auto Reboot, as I had to when I flashed the recovery.
Click to expand...
Click to collapse
If you want EP3H, this is the route you should go
http://forum.xda-developers.com/showthread.php?t=1293429
First you're going to have to flash the Odin file for Humble which is in the link above. Here's how you flash an Odin file:
http://forum.xda-developers.com/showthread.php?t=1160580
In the second link, you'll find detailed and pictured instructions on how to flash an Odin file and flashing recovery afterwards. If you need any other help, just let me know!
The link that you posted is for the Modems ONLY.
Thanks, I am read out for today, I will start reading your links tomorrow morning. I have read so much in the past few days on this forum that I most likely have read them already, and if I have, it will be easier the second time around.
It seems like every thread about flashing anything is always saying I have to use a different version of CWR. Why? Or am I just reading it wrong?
OK, I just flashed the EP3HAModem.tar.md5 to my phone and all went well. I can not tell if much has changed other than I can stream a Netflix cartoon with no waiting after it starts. That is an improvement. Still can not stream a movie though.
I have a Wilson repeater that I took down before the hurricane. I think I will put the antenna back up today and see if I can get more than one or two bars.
Right after I flashed I was getting some strange Speed test results. The upload speeds were way higher than download speeds. I went into recovery and rebooted from there. I have attached a screen capture of the results. (I can not figure out how to copy/past it directly here.)
The second attachment is a screen capture of my "about Phone" info as it is now.
Thanks for the help.

[Q] Samsung Galaxy S 4G Gingerbread 2.3.6 Update and Root

Samsung Galaxy S 4G Gingerbread 2.3.6 Update and Root
So i found this over at http://thepiratebay.org/torrent/6794946
if anyone has tried this let me know what happens and what you think. I bought this phone used a few weeks ago. I had no idea about rooting and unlocking and roms, I basically learned everyrthing thru research here....so naturally im a tad skeptical of things outside of this forum....silly
Ive rooted and unloked my phone. ive flashed several roms. right now i have the octane v2.3.5...smooth resposive fast
Not sure it's much if any different from what you can get out of the forums here. I'm running rooted 2.3.6.
I'm a 'better to be safe than sorry' type. Looks like that links makes a coupke of references back to here, anyway.
Sent from my SGH-T959V using XDA App
Don't use anything that isn't on this forum or in RootzWiki. You'll just get flamed for hard bricking by using something from another site.
Rooting and deleting bloat
I got this T959V last week and knew there had to be development on it. I got a Pandigital novel last christmas and learned some good lessons about android over at slatredroid. I was happy to find so much good work here and jumped right into flashing after slogging through this swamp (that's a compliment!) of info and choices. My phone arrived with Froyo 2.2.1 and stock T959VUVKD1. After getting my mind wrapped around the possibility of bricking the thing (which, thanks to the nature of the device and/or the excellent developers here, seems less likely than with the Pandigital) I used Odin to flash right to FW2.3.5, then tonight to FW2.3.6, T959VUVKJ5, kernel 2.6.35.7-T959VUVKF1-CL270364
I have not removed my sdcard (unlike w/pandigital flashing) or sim card on either of the three stops in my upgrading. HOWEVER, when I followed dsexton702's guide to rooting I did have to remove my battery - the red blowfish after loading his first rooting tarball nearly had me dropping a load in my pants. Couldn't power down with the button, so I pulled the battery and hoped. Put the battery back in, powered on and it booted. I thought factory reset, then reflashing 2.3.6 and forgetting about rooting. But I do want to remove some of the bloat from the device, so I just used odin to upload the second rooting tar and prayed! It worked! Thank you, dsxton702!
At least it seems to have worked. When I open titanium it now recognizes the device as rooted. I am using the freebie, which may be my real problem. But, anyway, here's where I am. When I try to delete preinstalled software like slacke by doing FORCE REMOVE APP in titanium I get this result:
finding update package
unknown volume for path [SYSTEM:/app/slackerradio.apk]
Can't mount SYSTEM:/app/slackerradio.apk
Installation aborted
Given these choices, I tried #4 first, then #1:
reboot system
apply update from sdcard
wipe data/factory reset
wipe cache partition
The app remains. I know I have to buy the app to freeze other apps; the error message tells me so. But to delete, is my problem that I am using the titanium freebie, or am I doing something wrong with the freebie?
So has anyone tried it? I just want to make sure someone has confirmation before I try this one.
neon_skunk said:
So has anyone tried it? I just want to make sure someone has confirmation before I try this one.
Click to expand...
Click to collapse
Neon - Use the GB Ext4 Starter Pack - It works.
Or use The KJ6 Heimdall One-Click Collection - It works.
Or use ROM-ODIN-2.3.6-Gingerbread Offical - It works.
If there were torrents for downloads things would be much easier:laugh:
Help me with Valhalla Custom ROM flashing
Hello. I just thought this forum to be the appropriate one for posting my issue. I have SGS4G. Using XDA forums help I have been able to upgrade from 2.3.3 to 2.3.6. lumin30's "[GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies" I have flashed my Kernel and installed CWM. Thanks a lot lumin30 for your guide. It really helped a noob like me.
However I am facing below problems
1. From the same link http://forum.xda-developers.com/showthread.php?t=1470716 I chose Valhalla Black FB edition. And when i choose "vb-fb-build-4.zip" download link it downloads very slowly and evenif the total file size initially shows as 143MB, however only 20-40MB files are getting downloaded. I have tried several times. Same issue..not sure why. Anyone has any link from where I can get the latest Valhalla Black FB edition?
2. When I tried to take the Valhalla Black FB Edition from "https://github.com/teamacid/valhalla-black (Valhalla Black FB Edition on GitHub) and downloaded it it was around 141MB. The name was "teamacid-valhalla-black-build3-4-ge768021.zip". not sure if this is the FB version or not. Anyway when I try flashing this ROM I am getting "update opening and installation aborted" on top it says "choose the update file from sdcard" or any other location kind of information..
Could anyone help me with these questions. It will really be a great help as I need to flash the ROM. Do I also need to install some more files along with the ROM?
Please help!!
tomzzy said:
Hello. I just thought this forum to be the appropriate one for posting my issue. I have SGS4G. Using XDA forums help I have been able to upgrade from 2.3.3 to 2.3.6. lumin30's "[GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies" I have flashed my Kernel and installed CWM. Thanks a lot lumin30 for your guide. It really helped a noob like me.
However I am facing below problems
1. From the same link http://forum.xda-developers.com/showthread.php?t=1470716 I chose Valhalla Black FB edition. And when i choose "vb-fb-build-4.zip" download link it downloads very slowly and evenif the total file size initially shows as 143MB, however only 20-40MB files are getting downloaded. I have tried several times. Same issue..not sure why. Anyone has any link from where I can get the latest Valhalla Black FB edition?
2. When I tried to take the Valhalla Black FB Edition from "https://github.com/teamacid/valhalla-black (Valhalla Black FB Edition on GitHub) and downloaded it it was around 141MB. The name was "teamacid-valhalla-black-build3-4-ge768021.zip". not sure if this is the FB version or not. Anyway when I try flashing this ROM I am getting "update opening and installation aborted" on top it says "choose the update file from sdcard" or any other location kind of information..
Could anyone help me with these questions. It will really be a great help as I need to flash the ROM. Do I also need to install some more files along with the ROM?
Click to expand...
Click to collapse
Is there anyone who can help me? I have checked all the forum's and tried all possible options..I am still getting on CWM5
Opening package
Installing package
Installation Aborted.
No other message.
I am on Valhalla Final and trying to flash Valhalla Black FB edition
Please someone help me!!
tomzzy said:
Is there anyone who can help me? I have checked all the forum's and tried all possible options..I am still getting on CWM5
Opening package
Installing package
Installation Aborted.
No other message.
I am on Valhalla Final and trying to flash Valhalla Black FB edition
Please someone help me!!
Click to expand...
Click to collapse
Check rom md5 you might have a bad download
And.try the download link.provided on rom thread OP that's it.
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
Are you choosing update from zip or install from zip? I haven't looked at cwm in awhile so not exactly sure what it says
Sent from my SGH-T959V using xda premium

Categories

Resources