please help me :- after our long wait for 2.2 to become avail for my galaxy s i was over the moon when i was 'allowed' to upgrade but to my horror when downloading to the phone windows vista decided it didn't recognize my device and terminated connection.
ive tried a few things since to try to rectify , i've deleted then reinstalled kies , kies was also telling me to go into recovery mode which my unit doesn't do , the phone & pc communicate fine to upload & download reg media etc it just seems that when digging android is doing his thing on my screen the pc decides NO!!!!!.
Also after each attempt to upgrade the phone seems to be un-affected and will boot & work without any problems.
As i said before please help as i bought android rather than sellout to you know who and all my 'i' mates are laughing.........
Related
Hello folks,
well i have a htc hd 2 us tmobile
i was able to use the android release by froyo 2.2 works great ( and so as the dual boot) till i want to call someone make the robot noise, so i clicked on the custom rom update i downloaded it and every time it starts to flash it stays at zero percent then it throws a error 262 every time i tried,i started with windows xp, downloaded active sync checked device manager to see that peripherals were tip top, it still does the same thing, tried windows 7 downloaded device manager same 262 error, tried removing sim and micro sd card same crap, tried to do it with the phone already in the bootloader same thing state guys im running out of ideas, please help
Hi Forum , I reflash my H2000 because I lost my Imei´s .
I bought a cable for flashing, but with a single USB, not with multi-port - 3 USB - as it appears in all of the instructions to load Firmware.
I installed the driver, run the program load "SPMultiPortFlashDownloadProject" of "BURNTOOL_SP_Download_L1104_V3.2.4". It run correctly the formatting but it couldn't load the Andriod and now I have the phone with black screen.
I would appreciate much if you can help me with how to load the Android and recover the phone.
Thanks
:/
It happened to me too
I think we lost our phones
Hi guys i really need help with this issue
I have a viewsonic 10s that was working on a modded rom for over 4 months , i read up on the vegacomb rom and decided to install it, install went fine , rebooted and rom seamed to work , after switching it off and on the following morning i cant get teh rom to load and more worrying is i now cant get to the recover screen .
the unit is currently stuck ina loop , shows install screen again and then the vengacomb logo but no futher
i have a youtube video showing this but am unable to post it at this time as ii am new to the forum, you can simply search my youtube user gohanni to view please please please help..........
still on going
the issue has been still on going, an after many attemptd to put the original firm ware back on i have discovered that teh usb driver that did work originaly to attempt to put the honey comb image on now shows in device manager as having 2 unknowen devices that appear when i connect the tablet via usb .
cdc serial
shuttle
both of these have esclamation marks, tried to auto update driver to no avail.
guys and girls really need some help
please search user gohanni on youtube for a short video showing the issue
hey guys
still no further any one have an idea what i have done and how to reverse it
????????
Hi everyone ! I am new to forum, so please forgive me if I post into the wrong category .
I have a very big problem with my phone (LG L3 Optimus E400) . I have installed a lot of custom roms on it and yesterday I realized that the current rom I was using doesn't receive text messages so I decided to try antoher one and I had the "great" idea to Flash v20 Baseband for flashing SlimBeane610 rom. That was very silly. After I flashed the rom, I rebooted my phone and nothing happened, screen is black all the time. When I press the power button the phone vibrates and the back and menu buttons lights up for 1 second like normal log on, then boom, all goes black again and if I don't remove the battery and I press the power button or any combination (like Reset, Emergency mode) doesn't work. I googled everything, I found something on this forum but not very useful. I tried wit adb but my phone isn't on so it can't be recognized. I tried wit KDZ Updater (until the phone was recognized) but I get a error like WParam: 100 and LParam: 500. When I connect it with USB sounds are playing like normal and Mobogenie wants to connect with it but I can't enable USB Debugging so it's pissing me off . If I can enable USB Debuggins from PC somehow, maybe I can connect phone with Mobogenie and make a restore , a backup or flash another rom, it would be easy If I can go into recovery or emergency mode but I can't . If it would exist a software that can erase everything on the phone when the it's turned off ... .I tried with LG TOOLS, LG PC SUITE IV, LG FLASH TOOLS, Android MULTI TOOLS and nothing(i have the latest drivers installed). Can I make something to it using the external_sd (like put a flash into it, connect it through PC via USB cable and try to flash a rom from command prompt but I don't know the paths). This is a very hard problem, I have a bricked L3 and I don't know hot to unbrick, I think isn't only a soft problem, maybe I should do something with its hardware ? If anyone could help I would really appreciate .
Thanks in advance !
PS : I won't be able to follow this conversation until the next week because I am going to "Primitive Age" right now...oh God, I'm only good to smash things . :crying:
PodGom said:
The most important thing is, can you see the LG logo that shows up in normal boot? If you don't, it'd be either a screen problem or a hard brick. Nobody except LG can fix these problems, and you would have to pay LG some money to fix the phone. But if you DO see the LG logo and your phone stops, you can try the below options.
It just may be bricked, and you could try getting into recovery and flash an alternative ROM. But if that doesn't work, tryLG mobile support tools to get it back to its stock firmware. Good Luck!
Click to expand...
Click to collapse
No, I can't see the LG logo . If I could saw the LG screen was very easy to fix it. I think the phone it's really dead and I also think that even an authorized service can't fix it . Do you know an approximately price for fixing this issue ? Thanks .
Hi,
You should definitely ask the experts who own your device for help, Here...
http://forum.xda-developers.com/optimus-l3-l5-l7/help
Good luck!
Thank you. Thread closed.
Hello Guys
So i recently purchased a samsung tablet (gt-n8013) it was working fine, i put it to charged came back from work and it wouldn't bootup ,it stuck at the samsung logo..I checked online (google and youtube) and it seems like a common issue with that tablet (thank you samsung), i tried almost everything, hard reset, root the tablet and nothing seems to be working. I also noticed my laptop doesn't recognized the device after i download the latest firmware from samsung,i tried different softwares like Odin or kies none of them wouldn't recognized the device, so it was impossible to root my tablet..i bought a new usb cable and tried the same steps on a different pc still nothing...Its been two weeks now still not working and i don't know what else to do, if anyone ran to the same problem and knows how to fix it ,could you kindly help me resolve this issue or point me out to the right direction PLEASE!!!..Thank you.
Hi, first, please don't make duplicate threads, http://forum.xda-developers.com/postings.php?t=3131512&pollid= We do this on our free time and sometimes it takes us awhile to respond
Your best bet is to ask for help in your device's forum here, http://forum.xda-developers.com/galaxy-note-10-1. But sometimes device's just die. Odin is your best chance to get it working again. With your device booted into download mode and connected to your pc does device manager show anything? Maybe an icon with a yellow exclamation mark.
Thread closed.