[Q] Removing Chrome ring - Galaxy S I9000 Accessories

Does anyone have experience in tearing down the Galaxy S Vibrant, and removing the chrome trim from the glass?
I've googled many tear-down videos and pictures, but none of them show removal of the chrome trim. They always leave it attached to the glass.
Any help?
Thanks in advance!

*sigh* this totally got moved to the wrong forum. I'm not asking about an aftermarket accessory. I just need to know how to remove the chrome bezel from the glass.... anyone?

davanw said:
*sigh* this totally got moved to the wrong forum. I'm not asking about an aftermarket accessory. I just need to know how to remove the chrome bezel from the glass.... anyone?
Click to expand...
Click to collapse
Hammer?
from what ive read on various posts regarding LCD changes it's actually double sided tape holding the Bezel on, but I do have to say ive not tried removing it so this could be pure lies!
this is what i was looking for:
http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37

Thanks for the reply!
Those pictures lead me to believe the screen itself is attached to the chassis with double-side tape or some kind of glue?
So, if I were brave enough to pry off the screen, I should then be able to fully remove the chrome bezel?
Thanks again!

You should send pm to this guy http://forum.xda-developers.com/showpost.php?p=8310879&postcount=72

Is it possible, to remove the chrome ring, without removing the screen?
I want change this ring, because its a little bit broken ...
Thanks

I'm also interested in this... I recently dropped my SGS on the road and I got roughed up a bit. It's not that bad though.
This thread got me thinking - If it's possible to remove the chrome ring, maybe I can bondo it up and then paint it some wacky color?

That's exactly what I was thinking when I started this thread.
But all the reading I've done sounds like you need to be able to remove the screen..... which is damn near impossible to do without shattering it.

Related

Loose hinge fix?

so I'm beginning to accept the fact that there's not much I can really do about my loose hinge. the truth is, it doesn't really hinder me in during regular use at all. however, its frustrating that I know it could have been better.
I might be satisfied if there was some case or something that secured the screen when open a bit more. maybe something involving magnets. anybody heard of anything like this? anybody wanna brainstorm on how to improvise it?
j.books said:
so I'm beginning to accept the fact that there's not much I can really do about my loose hinge. the truth is, it doesn't really hinder me in during regular use at all. however, its frustrating that I know it could have been better.
I might be satisfied if there was some case or something that secured the screen when open a bit more. maybe something involving magnets. anybody heard of anything like this? anybody wanna brainstorm on how to improvise it?
Click to expand...
Click to collapse
Dude... forget about it. If its really that bad... return it. Magnets will ruin the built in compass and god knows what other parts. Bad idea. Its supposed to be floatly. Trust me... its a welcom addition compared to the mytouch slide keyboard. The g2 is pretty smooth and as long as it doesn't fall when you hold it in a normal position, who cares...
This is my first post, hehe
bought my G2 on the 6th from Tmo store, mine is pretty solid, not loose at all, upside down, 45 degree angle, the screen doesnt go nowhere, closed or open, if i dont push it, it doesnt move, not even if i forcefully flick it!
im sure you could get a new one from tmobile/htc if it really bothers u, but looking at videos on youtube of the faulty screen, it would sure as hell bother me! good luck!
I'm in the same boat as j.books here. I'm LOVING the phone and while the wiggly hinge isn't an issue in how I use my phone it is just annoying knowing that it could/should have been better. I don't think I'm going to go through the hassle of returning the phone; it runs so well, I'm really afraid to spit in it's eye. :S
I'd contact whoever you got the phone from. If it is terribly loose and wiggly it's either a factory defect, packing fault. Possibly also fault of carrier. Either way if it's that much of an issue you may as well take the time to get to the bottom of it and figure out who to contact for a replacement or where to send your back to get it fixed. It's inconvenient for the user so make that clear when you contact them and demand some compensation.
I called t-mo last week and went to a t-mo store. it wasn't a 'known issue' at that point, and the t-mo store was absolutely worthless in terms of advice. one person was rude, one was nice, but both told me to call customer support, even though I already had.
the more I use the phone, the less of an issue it is. but it still bothers me. esp now that I know some people don't have the loose hinge. my 2 weeks is up on monday so I'm gonna call today and see if I am able to exchange it. problem is, I really don't want to go the whole weekend without it :\
j.books said:
.....maybe something involving magnets. anybody heard of anything like this?
Click to expand...
Click to collapse
I heard of magnets but I have no idea how they work....
....trollface.jpg
Take it apart, find the springs, and replace them with stronger ones. Other than that, your choices are replace it or live with it. Personally I'd replace the springs since I like to take things apart
Tell me how it goes don't see a G2 dis-assembly vid anywhere around
linkmaster_6 said:
I heard of magnets but I have no idea how they work....
....trollface.jpg
Click to expand...
Click to collapse
effin magnets, how do they work?
SuperDave81 said:
effin magnets, how do they work?
Click to expand...
Click to collapse
effing miracles
j.books said:
so I'm beginning to accept the fact that there's not much I can really do about my loose hinge. the truth is, it doesn't really hinder me in during regular use at all. however, its frustrating that I know it could have been better.
I might be satisfied if there was some case or something that secured the screen when open a bit more. maybe something involving magnets. anybody heard of anything like this? anybody wanna brainstorm on how to improvise it?
Click to expand...
Click to collapse
If you wanted to do this you need self adhesive magnet tape, thinest available less than 1mm or I don't think this mod will help.
Disclaimer. I haven't tried this but am sure it will work.
Cut tape to 2 1/4" x 1/2"
Cut 1/8" wide notch @ 1" to the right of left/rear edge.
Depth of notch [email protected] 1/4" ( the notch is for the small microswitch that senses the phone is closed, this switch also creates the limiting factor of magnet thickness. Bend the hoop upward you say? )
Test fit before you remove the backing ( magnet tape is placed between ribbon cable on left and 3rd hinge on right with notch around the microswitch. )
Good Luck!
PS this mod will hold the screen open and closed with no effect in between. I don't think it'll effect the compass because there is already tons of EMI in these devices, also you can recalibrate the compass and since the magnet is static it should compensate. Again good luck! And post pics if anyone is brave enough to attempt.
.
SuperDave81 said:
effin magnets, how do they work?
Click to expand...
Click to collapse
This thread is going places
kgold708 said:
If you wanted to do this you need self adhesive magnet tape, thinest available less than 1mm or I don't think this mod will help.
Disclaimer. I haven't tried this but am sure it will work.
Cut tape to 2 1/4" x 1/2"
Cut 1/8" wide notch @ 1" to the right of left/rear edge.
Depth of notch [email protected] 1/4" ( the notch is for the small microswitch that senses the phone is closed, this switch also creates the limiting factor of magnet thickness. Bend the hoop upward you say? )
Test fit before you remove the backing ( magnet tape is placed between ribbon cable on left and 3rd hinge on right with notch around the microswitch. )
Good Luck!
Click to expand...
Click to collapse
thanks dude. I was thinking of something like that, but I wasn't sure any magnetic tape would be thin enough. I looked it up and they never seem to specify the thickness, but there are products described as 'extra thin,' such as this: http://www.amazon.com/Extra-Flexible-Adhesive-Magnetic-Dispenser/dp/B000NNQ1CK ...think it would work?
SuperDave81 said:
effin magnets, how do they work?
Click to expand...
Click to collapse
hahaha. you just blew my f***ing mind
j.books said:
thanks dude. I was thinking of something like that, but I wasn't sure any magnetic tape would be thin enough. I looked it up and they never seem to specify the thickness, but there are products described as 'extra thin,' such as this: http://www.amazon.com/Extra-Flexible-Adhesive-Magnetic-Dispenser/dp/B000NNQ1CK ...think it would work?
Click to expand...
Click to collapse
Umm.... yep that looks like it'll do. When you get it stick some on wax paper, flip upside down,get one of those 6" metal "machinist rulers" , do your layout with a sharp pencil,and cut with exacto knife or new utility blade, test fit before removing wax paper(also compass,gps,etc function). Maybe use some cardboard pieces to hold the hinge open, getting the magnet into position will be the hardest part. Good luck and post pics/review.
This idea really appeals to my inner hacker.
keenerb said:
This idea really appeals to my inner hacker.
Click to expand...
Click to collapse
Do It!!! I would do it myself but I'm actually happy with my hinge and have to many other projects in the pipeline at the moment.
Apart from magnetic tape, we can also consider velcro/hook & loop
just stick a little at the back of the screen and the upper part of the keyboard
not too much to avoid noise/falling hair/forceful push
just the amount that keeps the screen in position anytime will do

[Q] Galaxy S metallic/ Chrome Frame replacement

Hi, I dropped my galaxy S on very rough surface and resulted in the metallic frame with ugly dent.
Is the metallic frame replaceable?
Is yes, I need help on guide how to do it.
Also anywhere I can place order for the frame?
Thanks in advance for the help
You can pretty much forget it. The screen is glued to the part you mention and the middle frame. You basicly have to remove te screen aswell as the sensorbuttons.
sorry to bring a thread up from the grave, so its pretty much HIGHLY recommended not to even attempt to replace this part ? (if its glued to the screen, then i guess thats a yes?) Ive wanted to replace it for a while; thought it might just slide off or something...from previous comment i guess not ?

[Q] Nexus S glue that holds screen to phone

Hey, I've done extensive searching on Google and these forums, something that is always left out is ABOUT GLUE.
I had a broken Nexus S screen and I changed my screen on the phone with a new one bought on eBay, the new screen works flawlessly but the OEM screen has a sort of adhesive tape that would make it adhere to the phone frame. And usually, all instructions for removing the screen talks about using some kind of a heat gun to make the glue loose.
Well the problem is that the new screens don't have this adhesive, I was wondering if anyone can suggest a kind of glue that would do the job for attaching the new screen to the phone. Right now as it is, the screen is only held in place to my phone by the wire which connects it to the phone's circuitboard.
on a german forum i've read a users experience... he used regular "super-glue" that you can buy everywhere. the one that makes your fingers stick in like 4-5 seconds.
he put little spots of glue everywhere the screen touches the plastic and quickly pushed the screen onto it. seems legit if you ask me - the screen doesnt weigh that much after all.
http://www.repairsuniverse.com/adhesive-strips-for-touch-screens.html
murfi said:
on a german forum i've read a users experience... he used regular "super-glue" that you can buy everywhere. the one that makes your fingers stick in like 4-5 seconds.
he put little spots of glue everywhere the screen touches the plastic and quickly pushed the screen onto it. seems legit if you ask me - the screen doesnt weigh that much after all.
Click to expand...
Click to collapse
That is ideally what I would really like to do instead of dealing with adhesive strips and then cutting the pieces to fit. I live in Germany now and the electronic store here said you can absolutely not use superglue and suggested instead that I used double-sided tape you buy from a photo store (Doppelseitiges, dünnes Klebeband).
What is the name of this 'super-glue' in Germany?
JoeyZazza said:
That is ideally what I would really like to do instead of dealing with adhesive strips and then cutting the pieces to fit. I live in Germany now and the electronic store here said you can absolutely not use superglue and suggested instead that I used double-sided tape you buy from a photo store (Doppelseitiges, dünnes Klebeband).
What is the name of this 'super-glue' in Germany?
Click to expand...
Click to collapse
Sekundenkleber
What if it broke again? I doubt you would be able to remove it if super glue it's used
Evo_Shift said:
What if it broke again? I doubt you would be able to remove it if super glue it's used
Click to expand...
Click to collapse
You're probably right but if it breaks again I'll just write off the phone as fully depreciated in my head.
Was the replacement one of these:
http://www.ebay.com/itm/All-New-Out...773?pt=LH_DefaultDomain_0&hash=item3a77cd07e5
or was it a full unit that go over $100?

Weird sound from touch cover

Hi all, I posted this in the Q&A section but no one answered...
My touch cover makes a sound when I press the keys.. no it's not the "pop" sound from the OS.
video: youtube
Is it normal and does your touch cover also do this?
Never heard anything from mine or anybody else's except for the sound that the OS makes...
HTCalltheway said:
Hi all, I posted this in the Q&A section but no one answered...
My touch cover makes a sound when I press the keys.. no it's not the "pop" sound from the OS.
video: youtube
Is it normal and does your touch cover also do this?
Click to expand...
Click to collapse
Wow, that is weird. They should be silent. Are you near a Microsoft store? I would think that would be swapped on the spot. And dissected.
There is a thin, pressure-sensitive layer which will deform a little bit under pressure (this is how it registers your keypresses) but it's almost invisibly thin and I've never heard anything before. Agreed with schettj on this one, although since it works anyhow if getting it replaced would be a hassle, you might be able to get by.
Has the cover ever gotten really wet? They're almost entirely waterproof (you can clean them with a damp cloth just fine, I'm not sure about a running faucet), but the contacts at the top are not sealed and if water got in there it might "squish" a bit.
Thank guys!!
Thanks everyone!
im 500km from the nearest ms store... :S guess I'll have a small trip soon...
just hope the replacement I get will be okay...
BTW my touch cover never got near any water..
Thanks again!!

[HELP] Opening a WHITE Nexus 5

Dear all,
I can't for the sake of me, remove the back cover of my white N5; I know there is glue at the bottom, but my issue is the middle clips on both sides (at the level of the U of NexUs), they just won't move! I tried gentle / shaky movements, then harder and harder to the point that I damaged the cover by deforming the border;
I use classic blue plastic pry openers and I even broke one! At this point if I try harder I will just tear the cover or break something!
I've seen like 5 videos on youtube and for each the clips on the side aren't any more difficult than the others; however I could only find videos of black N5s, could it be that the white is different?
Can someone share his experience with a white one?
This just drives me crazy, attached is a picture showing the problem and the damage as well
asim0 said:
Dear all,
I can't for the sake of me, remove the back cover of my white N5; I know there is glue at the bottom, but my issue is the middle clips on both sides (at the level of the U of NexUs), they just won't move! I tried gentle / shaky movements, then harder and harder to the point that I damaged the cover by deforming the border;
I use classic blue plastic pry openers and I even broke one! At this point if I try harder I will just tear the cover or break something!
I've seen like 5 videos on youtube and for each the clips on the side aren't any more difficult than the others; however I could only find videos of black N5s, could it be that the white is different?
Can someone share his experience with a white one?
This just drives me crazy, attached is a picture showing the problem and the damage as well
Click to expand...
Click to collapse
I have the same issue with my White Nexus 5. Hmmmm.
Why the hell are people trying to pop the back cover off these devices? They are not supposed to be removed
sent from my hammerhead
Damn homie dat pix ob yer fone luk messed up son
Sent from my Nexus 5
dicecuber said:
Damn homie dat pix ob yer fone luk messed up son
Sent from my Nexus 5
Click to expand...
Click to collapse
Damn, I always wondered what would happen if I turned my language to English Canadian lol
Yeah why are you trying to remove it? Just to prove you can? Looks like you just ruined your devece from what i can see. Hope it was worth it.
thats what u get for trying to open it
∆∆∆∆this. Can I have some of the money that y'all apparently just have lying around for these stunts?
sent from my hammerhead
You can order a new battery cover on ebay
Sent from this crappy Nexus 5
My white one came off fine, I used a butter knife. Just be careful with it, and use some force. Also the factory cover has the IMEI on the inside.
I will try harder I guess...
For those unhelpful posts that wonder why I do this, I ordered a spare speaker to try this mod, I would ever have needed to open it if it was not featuring the crappiest phone speaker I ever heard on a mobile or smartphone.
And the back case is just plastic which is quite flexible, the only damage is the border not the fact that it appears bended on the picture, and I don't care much of its aspect when I have a case for it... I am just afraid to break something inside the phone...
Its just a cover, worst case you break the cover. Everything else is pretty much protected behind a cover in there aside from the battery.
Sent from my Nexus 5 using xda app-developers app
Finally got in,
my mistake was to attempt to 'pry open' it, i.e. to put a lifting pressure on the cover;
The two clips in the middle are definitely stiffer, and the way to open it is to actually push really hard directly on the clips with lateral pressure towards the inside of the phone (towards the nexus logo).
The glue is piece of cake

Categories

Resources