Database Info

[Q] Phone Charm Loop?

Does the G2 have one? If not anyone know a good close fitting case with a loop on it?

There isn't anyplace to attach a lanyard or other "loop" on the phone.
I've yet to see a case available yet that has one, either.

When my wife had her G1 I used a tiny drill bit to make two holes in a cheap ebay case we bought her. Just find a good spot to put the holes that is far enough away that whatever is hanging from the lanyard cant swing and hit your screen. Two holes right next to each other should do the trick and you can loop the lanyard through.

Sounds like a plan, thanks for the help guys.

a lanyard loop would probably be a bad idea for this phone as I would imagine the keyboard would slide out quite often...bad hinge or not, I can see it happening.

Yeah, I don't get this whole concept. Don't see the purpose at all.
Sent from my T-Mobile G2 using XDA App

And this is how you eventually destroy the case...
http:
//0.starset.net/screenies/loop-20101018-231253.png
Obfuscated link because the admins here like to fight crime before it happens.
And yes charms are stupid, a short 6" lanyard is totally awesome for getting your device out when you're doing other things, like say riding a bike.

It was never for a lanyard so I could have the phone hanging off my neck or whatever people do with lanyards. Just wanted to use my phone charms I had on my Touch Pro 2 on this phone. If you don't know what a phone charm is its basically like a key chain but for a phone. I ended up looping it through the hole in the top right on the back of the clear plastic case from T-Mobile and it sits on there fine.
rubin110 said:
And this is how you eventually destroy the case...
http:
//0.starset.net/screenies/loop-20101018-231253.png
Obfuscated link because the admins here like to fight crime before it happens.
And yes charms are stupid, a short 6" lanyard is totally awesome for getting your device out when you're doing other things, like say riding a bike.
Click to expand...
Click to collapse
Lol I checked to see if that would worked before this post and yea, that's a good way to destroy your phones case. I like phone charms though, have a Sonic charm that's pretty nice, if I had more keys I'd probably toss it on a key chain but I use my phone more, don't pull on it for any purpose other than looks.

Xionas said:
for any purpose other than looks.
Click to expand...
Click to collapse
Ugh...

arxe41 said:
a lanyard loop would probably be a bad idea for this phone as I would imagine the keyboard would slide out quite often...bad hinge or not, I can see it happening.
Click to expand...
Click to collapse
Not at all if you hang it from the top right or bottom right corner (e.g. the corner the camera is on). This way the keyboard naturally hangs shut.

OK, found this AWESOME tear down of the Desire Z/G2
http:
//tjworld.net/blog/htc-desire-z-tear-down
So looking at the top and bottom right corners, perhaps we could drill an in and out hole to make a bomb proof lanyard anchor.
For those that doubt the use of a lanyard, all you need is a wrist strap, like on your camera, and this will mean that you're a lot less likely to drop and smash your DZ! I've dropped my old nokia lots of times and they bounce, but i doubt this will...

If all you need is a way to attach some charms, something that fits the 3.5mm headphone jack would work. I have seen styli that use this attachment method. As long as the plug is non-conductive it shouldn't confuse the phone any.

dissasembling an HTC inspire- stuff behind screen!

wondering if anyone has ever dissasembled thier inspire before....if its hard, tricky, details.
wierd thing, i dropped my phone yesterday, as it was falling i fumbled for it, smacked it up agains the wall in my house. Bits of drywall got wedged between the screen and the body of the phone, as i was trying to get it out with a thin knife, some of it dropped down inside the phone. i want to get it out because i have a feeling it will ende up making white dust in my screen.
another reason id like to get it open is to see if i can get the bottom right coner of the phone re-secured. its loose and floats up and down.

oFUNGUSo said:
wondering if anyone has ever dissasembled thier inspire before....if its hard, tricky, details.
wierd thing, i dropped my phone yesterday, as it was falling i fumbled for it, smacked it up agains the wall in my house. Bits of drywall got wedged between the screen and the body of the phone, as i was trying to get it out with a thin knife, some of it dropped down inside the phone. i want to get it out because i have a feeling it will ende up making white dust in my screen.
another reason id like to get it open is to see if i can get the bottom right coner of the phone re-secured. its loose and floats up and down.
Click to expand...
Click to collapse
DO NOT DO THIS! Not that you don't have the ability to do so...But because this phone has not been on the market for a year yet. the screen coming up is a defect. Get it replaced.
EDIT: A EXTREMELY slight movement is normal. It has to give to be stable. It's kind of the same concept behind a wooden roller coaster. Some, very minor flex is required, as it actually supplies more structural integrity. Now...If you had a knife under the screen, that is far too much flex, and should in fact be replaced.

tribalartgod said:
DO NOT DO THIS! Not that you don't have the ability to do so...But because this phone has not been on the market for a year yet. the screen coming up is a defect. Get it replaced.
EDIT: A EXTREMELY slight movement is normal. It has to give to be stable. It's kind of the same concept behind a wooden roller coaster. Some, very minor flex is required, as it actually supplies more structural integrity. Now...If you had a knife under the screen, that is far too much flex, and should in fact be replaced.
Click to expand...
Click to collapse
lol i think you are misunderstanding me, i was just trying to scrape the drywall from the little gap between the body and the screen on the left side fo the phone, i wasnt prying under it. the bottom right corner is something seperate. its not coming completely apart but it flexes noticeable up and down and make the screen turn funny colors there. ive read that its a common thing, but its not bad enough for me to want to send my phone in for replacement. i didnt get it from at&t

oFUNGUSo said:
lol i think you are misunderstanding me, i was just trying to scrape the drywall from the little gap between the body and the screen on the left side fo the phone, i wasnt prying under it. the bottom right corner is something seperate. its not coming completely apart but it flexes noticeable up and down and make the screen turn funny colors there. ive read that its a common thing, but its not bad enough for me to want to send my phone in for replacement. i didnt get it from at&t
Click to expand...
Click to collapse
Ah ok. I understand now. And I know what you need to get ALL of it out in seconds! You need Cyber Clean. I got some for Christmas and this stuff is amazing! Attached is what to look for. You can find it at Target normally in a little pouch. Got mine from thinkgeek and got a whole tub.
Damn...I sounded like Billy Mays there for a second. haha

tribalartgod said:
Ah ok. I understand now. And I know what you need to get ALL of it out in seconds! You need Cyber Clean. I got some for Christmas and this stuff is amazing! Attached is what to look for. You can find it at Target normally in a little pouch. Got mine from thinkgeek and got a whole tub.
Damn...I sounded like Billy Mays there for a second. haha
Click to expand...
Click to collapse
what the #$)%*( is that stuff!?!?!?!? LOL
im must know moar!

I can make a quick video of mine in use if you like? This stuff rules! And is completely harmless to your electronics.

oFUNGUSo said:
what the #$)%*( is that stuff!?!?!?!? LOL
im must know moar!
Click to expand...
Click to collapse
Looks like some sort of fungus

newter55 said:
Looks like some sort of fungus
Click to expand...
Click to collapse
LMAO. must have. even if this stuff dosnt work for my specific problem, i can think of at least 10 different things i can use if for right away.

i've been thinking about getting that stuff, i guess i will now though but i really need it to clean out under my macs keyboard

Yeah...
You really don't want to try to tackle taking this phone apart.. it is prolly one of the hardest phones to do.

cordell507 said:
i've been thinking about getting that stuff, i guess i will now though but i really need it to clean out under my macs keyboard
Click to expand...
Click to collapse
Check it out http://www.youtube.com/watch?v=jums36Hz39c&feature=related

Funny my screen "flexes" on the bottom right corner. It really bugs me, its stupid, but I wish I could fix it. It pops up, then I push it down. It's stays for less than 10min and pops back up. I'm not sure if its worth the hassle to call HTC.

sn707 said:
Funny my screen "flexes" on the bottom right corner. It really bugs me, its stupid, but I wish I could fix it. It pops up, then I push it down. It's stays for less than 10min and pops back up. I'm not sure if its worth the hassle to call HTC.
Click to expand...
Click to collapse
I used a clamp on mine last night. Placed a cloth between it and the phone and let the clamp do its thing for about 10 hours before taking it off this morning. I can see and tell a noticeable improvement. No flex. But only time will tell if this did the trick or not. So far after 3 hours it has not come up at the corner.
sent from my Inspire 4G using Tapatalk

will HTC really replace the phone over this corner issue? i dont think im going to be able to get the drywall out of my phone and its really bugging me, its wedged in theere HARD. hard enought to make the body of the phone flex away from the side of the screen......and there some thin plastic layer between the phone body and the side of the screen.....which i have messed up by trying to scrape the drywall out with a knife. boo. phone works perfectly but i hate the cosmetic issues

tribalartgod said:
DO NOT DO THIS! Not that you don't have the ability to do so...But because this phone has not been on the market for a year yet. the screen coming up is a defect. Get it replaced.
EDIT: A EXTREMELY slight movement is normal. It has to give to be stable. It's kind of the same concept behind a wooden roller coaster. Some, very minor flex is required, as it actually supplies more structural integrity. Now...If you had a knife under the screen, that is far too much flex, and should in fact be replaced.
Click to expand...
Click to collapse
Have other people been having the screen coming up problem? Mine is so severe that I can see light bleed on the bottom right hand corner. Wonder if it's covered by AT&T warranty

I just started having this same proble.I am TIIIIIIIRRRRRREEEDDDDD of ATT's crap though. I have been on the phone with them for 32 hrs in 38 days with now 4 different phones and I LOVE the Inspire. I am having the same issues now though where the screen is coming up and it's really really annoying. I mean REALLY annoying. I am thinking to just put an otter box defender on it and it will be fine? Can anyone confirm that the defender will keep the screen in place or any case for that matter?

I bought a silicon cover for $2 shipped off ebay and I didn't notice this issue until I just checked after reading this thread. The cover adds some serious bulk to the phone, but kept it from breaking when I dropped it from upper chest level on concrete (I'm 5'11"... and I swiped too far and caught the edge with my thumb. I almost cried).
P.S. It still hit hard enough to gouge the metal through the thick silicon

[Q] cracking the transformer open, need ideas

im trying to crack the transformer open and do u think the back is glued on or is it screwed on? im thinking theres probrably some screws behind the lable but cant seams to find anything here that wont scratch it to remove it. hit me up with ideas and hopfully I can post some kind of video on how to dissacemble the transformer.

It will most likely be fastened with screws. I think if it had been glue peoples cases wouldnt be 'creaky'. There were some pics on a Chinese site showing it open. I saved them to my pc, If I find them I'll upload.
Edit: Well I found them but they're not really showing the case. I'll attach them anyways and you can see if they help or not. It looks like once you get the bezel off the back just slides clean off.

Ok well scratch screws under the asus logo, thanks very much for those pics. I already have the screws out from the bottom. I'm guessing the back seals with some type of clips

Looking at there tools in second picture seams they used a guitar pic to losses it from its edges

cowballz69 said:
Looking at there tools in second picture seams they used a guitar pic to losses it from its edges
Click to expand...
Click to collapse
Maybe try a credit card?

Ha tore up my room looking for my guitar pic lol. Ill try my credit card

When in doubt use a hammer.

stuntdouble said:
When in doubt use a hammer.
Click to expand...
Click to collapse
Lol, tryed to use a credit card but its to thick, going to stop at the store tomorrow and pick one up

cowballz69, pm sent

If you have one, your best bet is a Stanley knife (boxcutter, I think you call them). Should be thin enough, you'll just have to be careful not to nick any internal crap.
If it were me, I'd use a scalpel, but I know most people don't have one handy.

ok well heres my mini review untill i get a guitar pick, i got the bottom half to crack open with a credit card(to thick but i did it), i was then able to slide the card from one end to the other. The plastic clips holding the metal are very very crappy. the metal was extreemly easy to bend and by just putting the card threw the bottom was enough to bend it. i was however; able to put it back together with out making it look as if i opened it, but u would need a ULTRA Thin piece of plastic to complete the mission(DO NOT USE ANYTHING ELSE BUT PLASTIC,,THE METAL AROUND THE EDGE IS SUPER FRAGLE). seams all ASUS does is pop the plastic backing in and screw the bottom and its off to who every buys it.
(Losining the bottom screws lowerd the light bleed that was there by 30% ( i was a full brightness and back screen and loosining the screwes made a big impact so the issue with the light bleed is to much pressure on those areas)
seams this is easy enough just need the right tools.

cowballz69 said:
(Losining the bottom screws lowerd the light bleed that was there by 30% ( i was a full brightness and back screen and loosining the screwes made a big impact so the issue with the light bleed is to much pressure on those areas)
seams this is easy enough just need the right tools.
Click to expand...
Click to collapse
Interesting. That seems to be the very spot where my screen has a little backlight bleeding. I'll try it out in a few minutes.

Youtube it
If this is the fix. A youtube vid would be awesome. Ready set go

paleridr said:
If this is the fix. A youtube vid would be awesome. Ready set go
Click to expand...
Click to collapse
thats not the only spot i have light bleed, i also have bleeding on the top portion and theres no screw to losen so must be on to tight from the inside. however this does prove that the bleeding is from pressure not the screen itself

You need these spudgers,
http://www.dealextreme.com/p/professional-premium-precision-phone-disassembly-tool-7-piece-set-23050
Get a few sets (if you're planning on opening up electronics on a regular basis). These are soft plastic, and will wear out after a few uses. You don't want to use anything harder like a knife, as then you will mar the 'lips' on the device shells. Aesthetics aside, that will show up as evidence of tampering, meaning goodbye warranty.
Most electronics use plastic snap-in clips to hold the shells, along with screws and possibly soft glue. Going slow will prevent the clips from snapping off, but not always.
You can find these same tools on Amazon and eBay. Just search on 'spudger', which is their name.
Use the guitar pick to get the initial crease, push one of the thicker wedges into the crease, and slide it along the seam. This assumes you've gotten all of the (hidden) screws.

e.mote said:
You need these spudgers,
http://www.dealextreme.com/p/professional-premium-precision-phone-disassembly-tool-7-piece-set-23050
Get a few sets (if you're planning on opening up electronics on a regular basis). These are soft plastic, and will wear out after a few uses. You don't want to use anything harder like a knife, as then you will mar the 'lips' on the device shells. Aesthetics aside, that will show up as evidence of tampering, meaning goodbye warranty.
Most electronics use plastic snap-in clips to hold the shells, along with screws and possibly soft glue. Going slow will prevent the clips from snapping off, but not always.
You can find these same tools on Amazon and eBay. Just search on 'spudger', which is their name.
Use the guitar pick to get the initial crease, push one of the thicker wedges into the crease, and slide it along the seam. This assumes you've gotten all of the (hidden) screws.
Click to expand...
Click to collapse
breaking a clip is def possible in this case

How did you get the screws on the bottom off? Do you have the right screw driver (any ideas where I can get one)?

jrac86 said:
How did you get the screws on the bottom off? Do you have the right screw driver (any ideas where I can get one)?
Click to expand...
Click to collapse
it's a torx.

jrac86 said:
How did you get the screws on the bottom off? Do you have the right screw driver (any ideas where I can get one)?
Click to expand...
Click to collapse
Use a Torx T6 bit.
When you opened it up, was there anything to suggest there was any way Asus would know you had opened it up please (if you hadnt bent the bezel ofc) if you needed to send it back under warranty for some reason?

opening is not recomended threw my experiance * I used the thinnest guitar pic today*,and the metal around the edge;any slight flex and it ends up staying that way and wont go back on straight no matter how carefull u are, also the clips that hold the plastic back to the bezil is ULTRA CRAPPY to a point u have a 50 50 chance of it not holding the plastic cover anymore. ON the plus side; if u loosen the bolts in the bottom, u can relieve the light bleed there. so reguarding the light bleed its best to just send it back to ASUS to get it fixed.
MY Next step is having ASUS fix my light bleed on my own tablet and not have them give me a replacement.
I will be posting a before picture of the light bleed when i send it out , and a After picture on when i recieve it back from them. good idea??

How stupid would it be to remove the metal covering status led?

Not all of it, just a little so that I could actually SEE the light blinking? Could dirt be getting to important parts in this case? and damage the phone?

So dust is always a problem. I didn`t do a tear down of my sensation yet.
But to minimize the risk:
1. Do it in your bathroom
2. Close the windows and turn for about 10min your shower on hot (depens on the size of your bath)
3. work with High presure spray in case of dust problems
Hope it helps you. Just in case, you wanna do it. But i can`t give you a guarantee that there isn`t dust anywhere.

xperiaforme said:
Not all of it, just a little so that I could actually SEE the light blinking? Could dirt be getting to important parts in this case? and damage the phone?
Click to expand...
Click to collapse
It's just a mesh to allow visibility of the LED and to not muffle the front speaker.
Take the back cover off the phone and you'll see the mesh is part of it.
In theory you could remove the entire mesh, in practice you may have to do that rather than removing just a section.

Would be easy to take a section out with a dremel tool or one of those small electric screwdrivers on low speed. Doing it by hand could get ugly.
Sent from my Cyanogenmod loaded Htc Sensation 4g

reload0815 said:
So dust is always a problem. I didn`t do a tear down of my sensation yet.
But to minimize the risk:
1. Do it in your bathroom
2. Close the windows and turn for about 10min your shower on hot (depens on the size of your bath)
3. work with High presure spray in case of dust problems
Hope it helps you. Just in case, you wanna do it. But i can`t give you a guarantee that there isn`t dust anywhere.
Click to expand...
Click to collapse
Lol, I think you meant to post this in the "how to apply a screen protector" thread. He's just taking off the back case and trimming the grill on the ear piece and not going to tear the phone apart. I'd recommend not exposing your phone to this extreme humidity in any situation and especially not if you were really going to rip open the guts of the phone. A few specs of dust won't kill a motherboard (there's most likely already dust or lint inside the phone anyway) but humid conditions can.

So you guys don't think I am being unreasonable? Lol. I'm a bit afraid to remove entire grill but it is true, removing just part of it appears dificult. Did anyone dare to do this yet?

xperiaforme said:
So you guys don't think I am being unreasonable? Lol. I'm a bit afraid to remove entire grill but it is true, removing just part of it appears dificult. Did anyone dare to do this yet?
Click to expand...
Click to collapse
I've had no need too, the bright notification LED is clearly visible through it.

just from an EE point of view that mesh could have been placed there for a reason (maybe a block from EMF) and if u do take it out you could cause the speaker to not function correctly.... if u had an old nokia phone and u replaced the screen with one of the aftermarket ones with out the mesh you'll know what i'm talking about.... but that may not be the case here... that could literrally just be a casing i'm not sure

anyone cut a hole in the s-cover for the LED

I think the S-Cover is an OK idea, not bad in theory, kinda annoying, but useful at the same time. I am debating on cutting a hole in the cover so I can see the LED! I mean, what the heck, why does all the covers , cover the LED? it makes the see thu part almost useless really..
anyone do it, anyone have an idea on the best way to?

eatonjb said:
I think the S-Cover is an OK idea, not bad in theory, kinda annoying, but useful at the same time. I am debating on cutting a hole in the cover so I can see the LED! I mean, what the heck, why does all the covers , cover the LED? it makes the see thu part almost useless really..
anyone do it, anyone have an idea on the best way to?
Click to expand...
Click to collapse
May i recommend a hole punch?
Use a high quality one though, a very sharp bladed one which will cut it with ease.

Did a simular thing on my Belkin pouch for me S3:
http://forum.xda-developers.com/showthread.php?t=1749562

Done exactly that on mine, it annoyed me that the led was covered so used a hole punch and marked up the spot. Works great!