Does the G2 have one? If not anyone know a good close fitting case with a loop on it?
There isn't anyplace to attach a lanyard or other "loop" on the phone.
I've yet to see a case available yet that has one, either.
When my wife had her G1 I used a tiny drill bit to make two holes in a cheap ebay case we bought her. Just find a good spot to put the holes that is far enough away that whatever is hanging from the lanyard cant swing and hit your screen. Two holes right next to each other should do the trick and you can loop the lanyard through.
Sounds like a plan, thanks for the help guys.
a lanyard loop would probably be a bad idea for this phone as I would imagine the keyboard would slide out quite often...bad hinge or not, I can see it happening.
Yeah, I don't get this whole concept. Don't see the purpose at all.
Sent from my T-Mobile G2 using XDA App
And this is how you eventually destroy the case...
http:
//0.starset.net/screenies/loop-20101018-231253.png
Obfuscated link because the admins here like to fight crime before it happens.
And yes charms are stupid, a short 6" lanyard is totally awesome for getting your device out when you're doing other things, like say riding a bike.
It was never for a lanyard so I could have the phone hanging off my neck or whatever people do with lanyards. Just wanted to use my phone charms I had on my Touch Pro 2 on this phone. If you don't know what a phone charm is its basically like a key chain but for a phone. I ended up looping it through the hole in the top right on the back of the clear plastic case from T-Mobile and it sits on there fine.
rubin110 said:
And this is how you eventually destroy the case...
http:
//0.starset.net/screenies/loop-20101018-231253.png
Obfuscated link because the admins here like to fight crime before it happens.
And yes charms are stupid, a short 6" lanyard is totally awesome for getting your device out when you're doing other things, like say riding a bike.
Click to expand...
Click to collapse
Lol I checked to see if that would worked before this post and yea, that's a good way to destroy your phones case. I like phone charms though, have a Sonic charm that's pretty nice, if I had more keys I'd probably toss it on a key chain but I use my phone more, don't pull on it for any purpose other than looks.
Xionas said:
for any purpose other than looks.
Click to expand...
Click to collapse
Ugh...
arxe41 said:
a lanyard loop would probably be a bad idea for this phone as I would imagine the keyboard would slide out quite often...bad hinge or not, I can see it happening.
Click to expand...
Click to collapse
Not at all if you hang it from the top right or bottom right corner (e.g. the corner the camera is on). This way the keyboard naturally hangs shut.
OK, found this AWESOME tear down of the Desire Z/G2
http:
//tjworld.net/blog/htc-desire-z-tear-down
So looking at the top and bottom right corners, perhaps we could drill an in and out hole to make a bomb proof lanyard anchor.
For those that doubt the use of a lanyard, all you need is a wrist strap, like on your camera, and this will mean that you're a lot less likely to drop and smash your DZ! I've dropped my old nokia lots of times and they bounce, but i doubt this will...
If all you need is a way to attach some charms, something that fits the 3.5mm headphone jack would work. I have seen styli that use this attachment method. As long as the plug is non-conductive it shouldn't confuse the phone any.
Related
When the screen is up to expose the keyboard there is a rattling sound. When the keyboard is down, no rattle.
who else has experienced this?
Do you think I should return it? If not, do you know what it is that rattles?
( this is not the "spring noise" that I have been reading about, at least I don't think it is)
mine does that
when its slid open there is a piece on the screen part on the side with the camera that can b moved
duno if its normal
Do you mean to say I can see the cause of the noise if I take the battery cover off, or did you disassemble your phone to find it?
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
well at least now I know what is rattling, thanks
np
but i would like to know if everyone has this
lbhocky19 said:
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
Click to expand...
Click to collapse
I see the same thing. looks like a cover plate for something.
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
It's the ribbon cable that connects the two halves of the phone. There is a little trap door there that covers it up while in the open position. If you watch it as you close the phone, the door opens as you slide it closed. But as it does that, it put tension on the spring, the tension keeps it tight when the phone is closed. When you open, no more tension and it has a little play in it. They should have spec'd the spring to have a little tension on it even in the open position so it would hold it still like when it's closed.
Oh well, probably some reason for it. Nothing to worry about at all though.
I was talking to my buddy at ATT last night. All the Fuze's have the rattle including mine. Nothing to worry
as long as it keeps the damn white screen away im happy
as long as it keeps the damn white screen away im happy
ya I was checking that out, it does look like all they needed was to keep a little spring tension on the door even when its all the way out
petard said:
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
Click to expand...
Click to collapse
Mine rattles when closed. annoying
It's a little annoying, not because of the sound but because it makes it seem that much less unfinished. For our money we shouldn't get rattling phones.
My Fuze never rattled til now...
Well, this seems to be a big issue. On mine, the spring doesn't seem to keep the trap door on the back of the display shut at all, its almost "jamming" sometimes when you close the keyboard. I shouldn't have to check to make sure nothing is in the way when retracting the keyboard.
I almost want to scotch tape the black trap door shut to keep it from moving around.
There is a "silver" rectangular metal plate connected to the tension spring that seems to have come loose somehow.
The black door can be slid back and forth freely, as there is "nothing" holding it shut.
I don't like lose metal parts moving around inside my electronics that aren't connected to things they should be. Not at what we paid for this thing.
I see dust problems in the display in the future. I wonder if its time for warranty action?
so I'm beginning to accept the fact that there's not much I can really do about my loose hinge. the truth is, it doesn't really hinder me in during regular use at all. however, its frustrating that I know it could have been better.
I might be satisfied if there was some case or something that secured the screen when open a bit more. maybe something involving magnets. anybody heard of anything like this? anybody wanna brainstorm on how to improvise it?
j.books said:
so I'm beginning to accept the fact that there's not much I can really do about my loose hinge. the truth is, it doesn't really hinder me in during regular use at all. however, its frustrating that I know it could have been better.
I might be satisfied if there was some case or something that secured the screen when open a bit more. maybe something involving magnets. anybody heard of anything like this? anybody wanna brainstorm on how to improvise it?
Click to expand...
Click to collapse
Dude... forget about it. If its really that bad... return it. Magnets will ruin the built in compass and god knows what other parts. Bad idea. Its supposed to be floatly. Trust me... its a welcom addition compared to the mytouch slide keyboard. The g2 is pretty smooth and as long as it doesn't fall when you hold it in a normal position, who cares...
This is my first post, hehe
bought my G2 on the 6th from Tmo store, mine is pretty solid, not loose at all, upside down, 45 degree angle, the screen doesnt go nowhere, closed or open, if i dont push it, it doesnt move, not even if i forcefully flick it!
im sure you could get a new one from tmobile/htc if it really bothers u, but looking at videos on youtube of the faulty screen, it would sure as hell bother me! good luck!
I'm in the same boat as j.books here. I'm LOVING the phone and while the wiggly hinge isn't an issue in how I use my phone it is just annoying knowing that it could/should have been better. I don't think I'm going to go through the hassle of returning the phone; it runs so well, I'm really afraid to spit in it's eye. :S
I'd contact whoever you got the phone from. If it is terribly loose and wiggly it's either a factory defect, packing fault. Possibly also fault of carrier. Either way if it's that much of an issue you may as well take the time to get to the bottom of it and figure out who to contact for a replacement or where to send your back to get it fixed. It's inconvenient for the user so make that clear when you contact them and demand some compensation.
I called t-mo last week and went to a t-mo store. it wasn't a 'known issue' at that point, and the t-mo store was absolutely worthless in terms of advice. one person was rude, one was nice, but both told me to call customer support, even though I already had.
the more I use the phone, the less of an issue it is. but it still bothers me. esp now that I know some people don't have the loose hinge. my 2 weeks is up on monday so I'm gonna call today and see if I am able to exchange it. problem is, I really don't want to go the whole weekend without it :\
j.books said:
.....maybe something involving magnets. anybody heard of anything like this?
Click to expand...
Click to collapse
I heard of magnets but I have no idea how they work....
....trollface.jpg
Take it apart, find the springs, and replace them with stronger ones. Other than that, your choices are replace it or live with it. Personally I'd replace the springs since I like to take things apart
Tell me how it goes don't see a G2 dis-assembly vid anywhere around
linkmaster_6 said:
I heard of magnets but I have no idea how they work....
....trollface.jpg
Click to expand...
Click to collapse
effin magnets, how do they work?
SuperDave81 said:
effin magnets, how do they work?
Click to expand...
Click to collapse
effing miracles
j.books said:
so I'm beginning to accept the fact that there's not much I can really do about my loose hinge. the truth is, it doesn't really hinder me in during regular use at all. however, its frustrating that I know it could have been better.
I might be satisfied if there was some case or something that secured the screen when open a bit more. maybe something involving magnets. anybody heard of anything like this? anybody wanna brainstorm on how to improvise it?
Click to expand...
Click to collapse
If you wanted to do this you need self adhesive magnet tape, thinest available less than 1mm or I don't think this mod will help.
Disclaimer. I haven't tried this but am sure it will work.
Cut tape to 2 1/4" x 1/2"
Cut 1/8" wide notch @ 1" to the right of left/rear edge.
Depth of notch [email protected] 1/4" ( the notch is for the small microswitch that senses the phone is closed, this switch also creates the limiting factor of magnet thickness. Bend the hoop upward you say? )
Test fit before you remove the backing ( magnet tape is placed between ribbon cable on left and 3rd hinge on right with notch around the microswitch. )
Good Luck!
PS this mod will hold the screen open and closed with no effect in between. I don't think it'll effect the compass because there is already tons of EMI in these devices, also you can recalibrate the compass and since the magnet is static it should compensate. Again good luck! And post pics if anyone is brave enough to attempt.
.
SuperDave81 said:
effin magnets, how do they work?
Click to expand...
Click to collapse
This thread is going places
kgold708 said:
If you wanted to do this you need self adhesive magnet tape, thinest available less than 1mm or I don't think this mod will help.
Disclaimer. I haven't tried this but am sure it will work.
Cut tape to 2 1/4" x 1/2"
Cut 1/8" wide notch @ 1" to the right of left/rear edge.
Depth of notch [email protected] 1/4" ( the notch is for the small microswitch that senses the phone is closed, this switch also creates the limiting factor of magnet thickness. Bend the hoop upward you say? )
Test fit before you remove the backing ( magnet tape is placed between ribbon cable on left and 3rd hinge on right with notch around the microswitch. )
Good Luck!
Click to expand...
Click to collapse
thanks dude. I was thinking of something like that, but I wasn't sure any magnetic tape would be thin enough. I looked it up and they never seem to specify the thickness, but there are products described as 'extra thin,' such as this: http://www.amazon.com/Extra-Flexible-Adhesive-Magnetic-Dispenser/dp/B000NNQ1CK ...think it would work?
SuperDave81 said:
effin magnets, how do they work?
Click to expand...
Click to collapse
hahaha. you just blew my f***ing mind
j.books said:
thanks dude. I was thinking of something like that, but I wasn't sure any magnetic tape would be thin enough. I looked it up and they never seem to specify the thickness, but there are products described as 'extra thin,' such as this: http://www.amazon.com/Extra-Flexible-Adhesive-Magnetic-Dispenser/dp/B000NNQ1CK ...think it would work?
Click to expand...
Click to collapse
Umm.... yep that looks like it'll do. When you get it stick some on wax paper, flip upside down,get one of those 6" metal "machinist rulers" , do your layout with a sharp pencil,and cut with exacto knife or new utility blade, test fit before removing wax paper(also compass,gps,etc function). Maybe use some cardboard pieces to hold the hinge open, getting the magnet into position will be the hardest part. Good luck and post pics/review.
This idea really appeals to my inner hacker.
keenerb said:
This idea really appeals to my inner hacker.
Click to expand...
Click to collapse
Do It!!! I would do it myself but I'm actually happy with my hinge and have to many other projects in the pipeline at the moment.
Apart from magnetic tape, we can also consider velcro/hook & loop
just stick a little at the back of the screen and the upper part of the keyboard
not too much to avoid noise/falling hair/forceful push
just the amount that keeps the screen in position anytime will do
wondering if anyone has ever dissasembled thier inspire before....if its hard, tricky, details.
wierd thing, i dropped my phone yesterday, as it was falling i fumbled for it, smacked it up agains the wall in my house. Bits of drywall got wedged between the screen and the body of the phone, as i was trying to get it out with a thin knife, some of it dropped down inside the phone. i want to get it out because i have a feeling it will ende up making white dust in my screen.
another reason id like to get it open is to see if i can get the bottom right coner of the phone re-secured. its loose and floats up and down.
oFUNGUSo said:
wondering if anyone has ever dissasembled thier inspire before....if its hard, tricky, details.
wierd thing, i dropped my phone yesterday, as it was falling i fumbled for it, smacked it up agains the wall in my house. Bits of drywall got wedged between the screen and the body of the phone, as i was trying to get it out with a thin knife, some of it dropped down inside the phone. i want to get it out because i have a feeling it will ende up making white dust in my screen.
another reason id like to get it open is to see if i can get the bottom right coner of the phone re-secured. its loose and floats up and down.
Click to expand...
Click to collapse
DO NOT DO THIS! Not that you don't have the ability to do so...But because this phone has not been on the market for a year yet. the screen coming up is a defect. Get it replaced.
EDIT: A EXTREMELY slight movement is normal. It has to give to be stable. It's kind of the same concept behind a wooden roller coaster. Some, very minor flex is required, as it actually supplies more structural integrity. Now...If you had a knife under the screen, that is far too much flex, and should in fact be replaced.
tribalartgod said:
DO NOT DO THIS! Not that you don't have the ability to do so...But because this phone has not been on the market for a year yet. the screen coming up is a defect. Get it replaced.
EDIT: A EXTREMELY slight movement is normal. It has to give to be stable. It's kind of the same concept behind a wooden roller coaster. Some, very minor flex is required, as it actually supplies more structural integrity. Now...If you had a knife under the screen, that is far too much flex, and should in fact be replaced.
Click to expand...
Click to collapse
lol i think you are misunderstanding me, i was just trying to scrape the drywall from the little gap between the body and the screen on the left side fo the phone, i wasnt prying under it. the bottom right corner is something seperate. its not coming completely apart but it flexes noticeable up and down and make the screen turn funny colors there. ive read that its a common thing, but its not bad enough for me to want to send my phone in for replacement. i didnt get it from at&t
oFUNGUSo said:
lol i think you are misunderstanding me, i was just trying to scrape the drywall from the little gap between the body and the screen on the left side fo the phone, i wasnt prying under it. the bottom right corner is something seperate. its not coming completely apart but it flexes noticeable up and down and make the screen turn funny colors there. ive read that its a common thing, but its not bad enough for me to want to send my phone in for replacement. i didnt get it from at&t
Click to expand...
Click to collapse
Ah ok. I understand now. And I know what you need to get ALL of it out in seconds! You need Cyber Clean. I got some for Christmas and this stuff is amazing! Attached is what to look for. You can find it at Target normally in a little pouch. Got mine from thinkgeek and got a whole tub.
Damn...I sounded like Billy Mays there for a second. haha
tribalartgod said:
Ah ok. I understand now. And I know what you need to get ALL of it out in seconds! You need Cyber Clean. I got some for Christmas and this stuff is amazing! Attached is what to look for. You can find it at Target normally in a little pouch. Got mine from thinkgeek and got a whole tub.
Damn...I sounded like Billy Mays there for a second. haha
Click to expand...
Click to collapse
what the #$)%*( is that stuff!?!?!?!? LOL
im must know moar!
I can make a quick video of mine in use if you like? This stuff rules! And is completely harmless to your electronics.
oFUNGUSo said:
what the #$)%*( is that stuff!?!?!?!? LOL
im must know moar!
Click to expand...
Click to collapse
Looks like some sort of fungus
newter55 said:
Looks like some sort of fungus
Click to expand...
Click to collapse
LMAO. must have. even if this stuff dosnt work for my specific problem, i can think of at least 10 different things i can use if for right away.
i've been thinking about getting that stuff, i guess i will now though but i really need it to clean out under my macs keyboard
Yeah...
You really don't want to try to tackle taking this phone apart.. it is prolly one of the hardest phones to do.
cordell507 said:
i've been thinking about getting that stuff, i guess i will now though but i really need it to clean out under my macs keyboard
Click to expand...
Click to collapse
Check it out http://www.youtube.com/watch?v=jums36Hz39c&feature=related
Funny my screen "flexes" on the bottom right corner. It really bugs me, its stupid, but I wish I could fix it. It pops up, then I push it down. It's stays for less than 10min and pops back up. I'm not sure if its worth the hassle to call HTC.
sn707 said:
Funny my screen "flexes" on the bottom right corner. It really bugs me, its stupid, but I wish I could fix it. It pops up, then I push it down. It's stays for less than 10min and pops back up. I'm not sure if its worth the hassle to call HTC.
Click to expand...
Click to collapse
I used a clamp on mine last night. Placed a cloth between it and the phone and let the clamp do its thing for about 10 hours before taking it off this morning. I can see and tell a noticeable improvement. No flex. But only time will tell if this did the trick or not. So far after 3 hours it has not come up at the corner.
sent from my Inspire 4G using Tapatalk
will HTC really replace the phone over this corner issue? i dont think im going to be able to get the drywall out of my phone and its really bugging me, its wedged in theere HARD. hard enought to make the body of the phone flex away from the side of the screen......and there some thin plastic layer between the phone body and the side of the screen.....which i have messed up by trying to scrape the drywall out with a knife. boo. phone works perfectly but i hate the cosmetic issues
tribalartgod said:
DO NOT DO THIS! Not that you don't have the ability to do so...But because this phone has not been on the market for a year yet. the screen coming up is a defect. Get it replaced.
EDIT: A EXTREMELY slight movement is normal. It has to give to be stable. It's kind of the same concept behind a wooden roller coaster. Some, very minor flex is required, as it actually supplies more structural integrity. Now...If you had a knife under the screen, that is far too much flex, and should in fact be replaced.
Click to expand...
Click to collapse
Have other people been having the screen coming up problem? Mine is so severe that I can see light bleed on the bottom right hand corner. Wonder if it's covered by AT&T warranty
I just started having this same proble.I am TIIIIIIIRRRRRREEEDDDDD of ATT's crap though. I have been on the phone with them for 32 hrs in 38 days with now 4 different phones and I LOVE the Inspire. I am having the same issues now though where the screen is coming up and it's really really annoying. I mean REALLY annoying. I am thinking to just put an otter box defender on it and it will be fine? Can anyone confirm that the defender will keep the screen in place or any case for that matter?
I bought a silicon cover for $2 shipped off ebay and I didn't notice this issue until I just checked after reading this thread. The cover adds some serious bulk to the phone, but kept it from breaking when I dropped it from upper chest level on concrete (I'm 5'11"... and I swiped too far and caught the edge with my thumb. I almost cried).
P.S. It still hit hard enough to gouge the metal through the thick silicon
im trying to crack the transformer open and do u think the back is glued on or is it screwed on? im thinking theres probrably some screws behind the lable but cant seams to find anything here that wont scratch it to remove it. hit me up with ideas and hopfully I can post some kind of video on how to dissacemble the transformer.
It will most likely be fastened with screws. I think if it had been glue peoples cases wouldnt be 'creaky'. There were some pics on a Chinese site showing it open. I saved them to my pc, If I find them I'll upload.
Edit: Well I found them but they're not really showing the case. I'll attach them anyways and you can see if they help or not. It looks like once you get the bezel off the back just slides clean off.
Ok well scratch screws under the asus logo, thanks very much for those pics. I already have the screws out from the bottom. I'm guessing the back seals with some type of clips
Looking at there tools in second picture seams they used a guitar pic to losses it from its edges
cowballz69 said:
Looking at there tools in second picture seams they used a guitar pic to losses it from its edges
Click to expand...
Click to collapse
Maybe try a credit card?
Ha tore up my room looking for my guitar pic lol. Ill try my credit card
When in doubt use a hammer.
stuntdouble said:
When in doubt use a hammer.
Click to expand...
Click to collapse
Lol, tryed to use a credit card but its to thick, going to stop at the store tomorrow and pick one up
cowballz69, pm sent
If you have one, your best bet is a Stanley knife (boxcutter, I think you call them). Should be thin enough, you'll just have to be careful not to nick any internal crap.
If it were me, I'd use a scalpel, but I know most people don't have one handy.
ok well heres my mini review untill i get a guitar pick, i got the bottom half to crack open with a credit card(to thick but i did it), i was then able to slide the card from one end to the other. The plastic clips holding the metal are very very crappy. the metal was extreemly easy to bend and by just putting the card threw the bottom was enough to bend it. i was however; able to put it back together with out making it look as if i opened it, but u would need a ULTRA Thin piece of plastic to complete the mission(DO NOT USE ANYTHING ELSE BUT PLASTIC,,THE METAL AROUND THE EDGE IS SUPER FRAGLE). seams all ASUS does is pop the plastic backing in and screw the bottom and its off to who every buys it.
(Losining the bottom screws lowerd the light bleed that was there by 30% ( i was a full brightness and back screen and loosining the screwes made a big impact so the issue with the light bleed is to much pressure on those areas)
seams this is easy enough just need the right tools.
cowballz69 said:
(Losining the bottom screws lowerd the light bleed that was there by 30% ( i was a full brightness and back screen and loosining the screwes made a big impact so the issue with the light bleed is to much pressure on those areas)
seams this is easy enough just need the right tools.
Click to expand...
Click to collapse
Interesting. That seems to be the very spot where my screen has a little backlight bleeding. I'll try it out in a few minutes.
Youtube it
If this is the fix. A youtube vid would be awesome. Ready set go
paleridr said:
If this is the fix. A youtube vid would be awesome. Ready set go
Click to expand...
Click to collapse
thats not the only spot i have light bleed, i also have bleeding on the top portion and theres no screw to losen so must be on to tight from the inside. however this does prove that the bleeding is from pressure not the screen itself
You need these spudgers,
http://www.dealextreme.com/p/professional-premium-precision-phone-disassembly-tool-7-piece-set-23050
Get a few sets (if you're planning on opening up electronics on a regular basis). These are soft plastic, and will wear out after a few uses. You don't want to use anything harder like a knife, as then you will mar the 'lips' on the device shells. Aesthetics aside, that will show up as evidence of tampering, meaning goodbye warranty.
Most electronics use plastic snap-in clips to hold the shells, along with screws and possibly soft glue. Going slow will prevent the clips from snapping off, but not always.
You can find these same tools on Amazon and eBay. Just search on 'spudger', which is their name.
Use the guitar pick to get the initial crease, push one of the thicker wedges into the crease, and slide it along the seam. This assumes you've gotten all of the (hidden) screws.
e.mote said:
You need these spudgers,
http://www.dealextreme.com/p/professional-premium-precision-phone-disassembly-tool-7-piece-set-23050
Get a few sets (if you're planning on opening up electronics on a regular basis). These are soft plastic, and will wear out after a few uses. You don't want to use anything harder like a knife, as then you will mar the 'lips' on the device shells. Aesthetics aside, that will show up as evidence of tampering, meaning goodbye warranty.
Most electronics use plastic snap-in clips to hold the shells, along with screws and possibly soft glue. Going slow will prevent the clips from snapping off, but not always.
You can find these same tools on Amazon and eBay. Just search on 'spudger', which is their name.
Use the guitar pick to get the initial crease, push one of the thicker wedges into the crease, and slide it along the seam. This assumes you've gotten all of the (hidden) screws.
Click to expand...
Click to collapse
breaking a clip is def possible in this case
How did you get the screws on the bottom off? Do you have the right screw driver (any ideas where I can get one)?
jrac86 said:
How did you get the screws on the bottom off? Do you have the right screw driver (any ideas where I can get one)?
Click to expand...
Click to collapse
it's a torx.
jrac86 said:
How did you get the screws on the bottom off? Do you have the right screw driver (any ideas where I can get one)?
Click to expand...
Click to collapse
Use a Torx T6 bit.
When you opened it up, was there anything to suggest there was any way Asus would know you had opened it up please (if you hadnt bent the bezel ofc) if you needed to send it back under warranty for some reason?
opening is not recomended threw my experiance * I used the thinnest guitar pic today*,and the metal around the edge;any slight flex and it ends up staying that way and wont go back on straight no matter how carefull u are, also the clips that hold the plastic back to the bezil is ULTRA CRAPPY to a point u have a 50 50 chance of it not holding the plastic cover anymore. ON the plus side; if u loosen the bolts in the bottom, u can relieve the light bleed there. so reguarding the light bleed its best to just send it back to ASUS to get it fixed.
MY Next step is having ASUS fix my light bleed on my own tablet and not have them give me a replacement.
I will be posting a before picture of the light bleed when i send it out , and a After picture on when i recieve it back from them. good idea??
Dear all,
I can't for the sake of me, remove the back cover of my white N5; I know there is glue at the bottom, but my issue is the middle clips on both sides (at the level of the U of NexUs), they just won't move! I tried gentle / shaky movements, then harder and harder to the point that I damaged the cover by deforming the border;
I use classic blue plastic pry openers and I even broke one! At this point if I try harder I will just tear the cover or break something!
I've seen like 5 videos on youtube and for each the clips on the side aren't any more difficult than the others; however I could only find videos of black N5s, could it be that the white is different?
Can someone share his experience with a white one?
This just drives me crazy, attached is a picture showing the problem and the damage as well
asim0 said:
Dear all,
I can't for the sake of me, remove the back cover of my white N5; I know there is glue at the bottom, but my issue is the middle clips on both sides (at the level of the U of NexUs), they just won't move! I tried gentle / shaky movements, then harder and harder to the point that I damaged the cover by deforming the border;
I use classic blue plastic pry openers and I even broke one! At this point if I try harder I will just tear the cover or break something!
I've seen like 5 videos on youtube and for each the clips on the side aren't any more difficult than the others; however I could only find videos of black N5s, could it be that the white is different?
Can someone share his experience with a white one?
This just drives me crazy, attached is a picture showing the problem and the damage as well
Click to expand...
Click to collapse
I have the same issue with my White Nexus 5. Hmmmm.
Why the hell are people trying to pop the back cover off these devices? They are not supposed to be removed
sent from my hammerhead
Damn homie dat pix ob yer fone luk messed up son
Sent from my Nexus 5
dicecuber said:
Damn homie dat pix ob yer fone luk messed up son
Sent from my Nexus 5
Click to expand...
Click to collapse
Damn, I always wondered what would happen if I turned my language to English Canadian lol
Yeah why are you trying to remove it? Just to prove you can? Looks like you just ruined your devece from what i can see. Hope it was worth it.
thats what u get for trying to open it
∆∆∆∆this. Can I have some of the money that y'all apparently just have lying around for these stunts?
sent from my hammerhead
You can order a new battery cover on ebay
Sent from this crappy Nexus 5
My white one came off fine, I used a butter knife. Just be careful with it, and use some force. Also the factory cover has the IMEI on the inside.
I will try harder I guess...
For those unhelpful posts that wonder why I do this, I ordered a spare speaker to try this mod, I would ever have needed to open it if it was not featuring the crappiest phone speaker I ever heard on a mobile or smartphone.
And the back case is just plastic which is quite flexible, the only damage is the border not the fact that it appears bended on the picture, and I don't care much of its aspect when I have a case for it... I am just afraid to break something inside the phone...
Its just a cover, worst case you break the cover. Everything else is pretty much protected behind a cover in there aside from the battery.
Sent from my Nexus 5 using xda app-developers app
Finally got in,
my mistake was to attempt to 'pry open' it, i.e. to put a lifting pressure on the cover;
The two clips in the middle are definitely stiffer, and the way to open it is to actually push really hard directly on the clips with lateral pressure towards the inside of the phone (towards the nexus logo).
The glue is piece of cake