i have a Qtek 9000 but still what to use some of my programs from my WM5
does this work?
Exchange Mail support
TOMTOM
TOMTOM Bluetooth GPS
Bluetooth
and Sync with Outlook from XP or Vista
if any can confirm this works with WM6 than i´ll go for it
i never use Video calls so that does´t matter.
Can any recommend a ROM for me?
Yep they all work.
Except if you are going to use Direct Push mail with Exchange, with a constantly active connection, you will probably have issues with your data connection hanging. The only way to resolve it is to enable/disable the radio (sometimes works) or soft reset.
To stop it happening in the first place, selecting GSM only (ie not 3G) in the Radio options does the job..
1,open of course sucess.
2, WPE also sucess.
But WPA(Pre-SharedKey) can not be sucess.
D900 version: 18159 WWE.
For me only Jwrightcmp's WM6 2.02.02 ROM works. Or WM5.
UPDATE!!! Working
Goes through all of the right motions but unfortunately does not connectfor me either. WEP and open do work for me. I use WEP and MAC filtering at home, but would prefer TKIP.
I left it sit on my desk for about half an hour, trying to access the wireless router. I was checking it one last time, before giving up, but it had connected!!!! I will try again tomorrow and report back.
Works But Buggy IMO
I Personally Use WEP At Home Even Though I Know It Can Be Cracked In 5-10 Mins With The Right Knowledge, (Ive Done It Myself Even With MAC Filtering Enabled)
My Girlfriend Has SKY Broadband And Her Router Uses WPA:TKIP.
I Find That I Can Connect On Most WM6 Roms But I Have To Do The Following:
Enable WIFI.
Wait For WIFI To Start The Connection Process.
Disable WIFI.
Enable Wifi Again.
Now My Wireless Connects And Works.
Im Not Sure That This Works With All WPA Configurations But For Me This Works With WPA:TKIP On WM6 ROMs That Are Supposed To Suffer From The WPA Bug.
If This Works For Anyone Else Then Feel Free To Confirm This Method.
OllieD said:
I Personally Use WEP At Home Even Though I Know It Can Be Cracked In 5-10 Mins With The Right Knowledge, (Ive Done It Myself Even With MAC Filtering Enabled)
My Girlfriend Has SKY Broadband And Her Router Uses WPA:TKIP.
I Find That I Can Connect On Most WM6 Roms But I Have To Do The Following:
Enable WIFI.
Wait For WIFI To Start The Connection Process.
Disable WIFI.
Enable Wifi Again.
Now My Wireless Connects And Works.
Im Not Sure That This Works With All WPA Configurations But For Me This Works With WPA:TKIP On WM6 ROMs That Are Supposed To Suffer From The WPA Bug.
If This Works For Anyone Else Then Feel Free To Confirm This Method.
Click to expand...
Click to collapse
Last year's news....
I Didnt Have My Exec A Year Ago!
We Didnt Have WM6 a Year Ago Did We?
Was Only Trying To Help Unlike Some:
shlomki said:
Last year's news....
Click to expand...
Click to collapse
OllieD said:
I Didnt Have My Exec A Year Ago!
We Didnt Have WM6 a Year Ago Did We?
Was Only Trying To Help Unlike Some:
Click to expand...
Click to collapse
im sorry, didn't mean to be mean.
That was my despair talking...
We are a family!!!
Thanks you all for your kindly and usefull info that i checked:
build 15341, direct to use WPA/PSK;
build 18159: just followed OllieD said, and possible use WPA, 18159 not very stable.
build 17913: as Ollied said, During searching WPA, just switch off wifi and take it on, then WPA connected. Ok, i will use this stable and fast ROM untill a usefull G4 ROM build 18508 (or 19xxx)!!!
OllieD said:
I Personally Use WEP At Home Even Though I Know It Can Be Cracked In 5-10 Mins With The Right Knowledge, (Ive Done It Myself Even With MAC Filtering Enabled)
My Girlfriend Has SKY Broadband And Her Router Uses WPA:TKIP.
I Find That I Can Connect On Most WM6 Roms But I Have To Do The Following:
Enable WIFI.
Wait For WIFI To Start The Connection Process.
Disable WIFI.
Enable Wifi Again.
Now My Wireless Connects And Works.
Im Not Sure That This Works With All WPA Configurations But For Me This Works With WPA:TKIP On WM6 ROMs That Are Supposed To Suffer From The WPA Bug.
If This Works For Anyone Else Then Feel Free To Confirm This Method.
Click to expand...
Click to collapse
This has always worked for me in WM6.
I reported yesterday that I had success with WPA-TKIP, that is still the case. I reflashed today with Leo's latest, and even though there are still some issues, I was able to connect today again to WPA-TKIP at work. It took time for the first connect to go through, but whenever I came back to the device, woke it up and relinked, it has been fine all day. I will check again on Monday and Tuesday, But it appears to work for me. (I have a G3) one of the earliest Uni's in the US through a special importer.
Another trick
OllieD said:
I Personally Use WEP At Home Even Though I Know It Can Be Cracked In 5-10 Mins With The Right Knowledge, (Ive Done It Myself Even With MAC Filtering Enabled)
My Girlfriend Has SKY Broadband And Her Router Uses WPA:TKIP.
I Find That I Can Connect On Most WM6 Roms But I Have To Do The Following:
Enable WIFI.
Wait For WIFI To Start The Connection Process.
Disable WIFI.
Enable Wifi Again.
Now My Wireless Connects And Works.
Im Not Sure That This Works With All WPA Configurations But For Me This Works With WPA:TKIP On WM6 ROMs That Are Supposed To Suffer From The WPA Bug.
If This Works For Anyone Else Then Feel Free To Confirm This Method.
Click to expand...
Click to collapse
I use a little different approach since yours doesn't work for me (just change step 3 and 4):
Enable WIFI.
Wait For WIFI To Start The Connection Process.
Turn off Uni and wait a couple of seconds.
Turn on Uni.
Now My Wireless Connects And Works.
Marco.
cails to connect the first time only
1.switch on wifi (using connection manager) - fails to connect
2. switch off wifi
3. switch on wifi and it successfully connects.
I use this ROM: http://forum.xda-developers.com/showthread.php?t=325466
Juun said:
For me only Jwrightcmp's WM6 2.02.02 ROM works. Or WM5.
Click to expand...
Click to collapse
im using the same rom and WPA PSK/TKIP works fine it connects fast and keeps connected
No WPA PSK/TKIP problems with Darkforce Rom. It may be outdated but still rocks!
Hi
I'm using Leo's latest rom update 1 (1.17.00,42.53.P8,2.11.00 WWE,5.2.1908 b18508.0.7.0. My bootloader says 1.00 so I guess its a G3)
I've been trying all 3 methods I've read here for about a week (wifi on wait 30 mins, wifi on, off and back on, wifi on and uni off and back on) with my old Netgear WGT624 (one of the early 108Mbps routers).
Finally today I started changing the settings on the router and got it working. I changed the "mode" setting from "Auto 108" to "g only" but it still didn't work. Then I changed it to "b and g" and the "wifi off - wait 2 secs - back on" worked immediately. I guess the other 2 methods will work too.
w4tch3r
18508 for G4 run out but WPA fault!
also, switched on wifi but can not switch it off!
G4 Build 18508 by ranju.
this is the first G4 build 18508 ROM, Thanks ranju anyway!!!
finding a commManager to update maybe fix this!
if we haven't a commManager, how to switch WIFI on and off???
Try this, it's already working on other devices like the Axim X51V and the HX4700.
Download Instructions: download archive http://rapidshare.com/files/59123134/x51v_wm6_wpa_fix.rar.html
You must copy wzcsvc.dll to your \windows folder
You can't do that in your PDA.
1- Turn-off wifi, then soft-reset your PDA
2- Connect to your PC via activesync
3- Copy wzcsvc.dll from PC to \windows folder of PDA via ActiveSync's explorer
Thanks to vagus
LZF said:
Try this, it's already working on other devices like the Axim X51V and the HX4700.
Download Instructions: download archive http://rapidshare.com/files/59123134/x51v_wm6_wpa_fix.rar.html
You must copy wzcsvc.dll to your \windows folder
You can't do that in your PDA.
1- Turn-off wifi, then soft-reset your PDA
2- Connect to your PC via activesync
3- Copy wzcsvc.dll from PC to \windows folder of PDA via ActiveSync's explorer
Thanks to vagus
Click to expand...
Click to collapse
Any comment on it? Does it work as balloon fix too?
I've developed another workaround solution here...
nomens said:
also, switched on wifi but can not switch it off!
G4 Build 18508 by ranju.
this is the first G4 build 18508 ROM, Thanks ranju anyway!!!
finding a commManager to update maybe fix this!
if we haven't a commManager, how to switch WIFI on and off???
Click to expand...
Click to collapse
I have the same problem... I'll develop a new CommManager soon... that will cooperate with my WiFiService... You can use this to effectively turn on/off the WiFi device through the Connectivity balloon (fixed)...
goodmorning ! wake up HTC Universal users
this may your most important update since wm6 is possible
This software eliminates the need for turn off/turn on trick to connect wpa networks on Dell Axim x51V, and HP HX 4700.
i suppose it will also work for you
mamiware said:
to effectively turn on/off the WiFi device through the Connectivity balloon (fixed)...
Click to expand...
Click to collapse
i don't own a Universal, so i don't aware balloon problem
Hi,
I wonder if anyone has been able to use the vox/ htc e650 as a modem with a palm pda.
I used to use my spv c550 and old e200 with a T3 no problems at all, both with infrared and with bluetooth.
I can pair my e650 and send files to/from the devices but no amount of fiddling with the connections work to enable dial up gprs.(*99# on orange node)
I worked out how to set this up on the older spvs when I worked for orange so they could update their internal pages when people called about this but canoot get it working on vox models.
I have tried setting generic gsm phone or universal phone driver which worked on my old spv so am guessing that something has been changed in the way it uses modem drivers or windows mobile.
Can anyone help ?
Thanks
it seems I found the answer after looking thru the forums.
Discovered the cab that allows DUN via bluetooth instead of the pan internet sharing which I don't thing the palm supports anyway.
One thing I noticed is that there is nothing on the phone to indicate a connection is in progress.
On previous spv phones and ipaq I has 2 arrowa to show data connection was made.
Is this usual on vox or just a quirk of the dun workaround ?
Hi there..
I m a newbee to these forums... I found it very helpfrul.
I have a problem with my Imate Jamin. It had WM5 and it was smooth.. though it was a bit slow... I upgraded the rom to 6.1 from PDAVIET (1c). I love the new one.. amazingly fast and really cute. I noticed the clarity in sound has increased...
But the problem with it is ... it doesnot allow me to share internet with my laptop or PC thru USB. Earlier in wm5, I used "modem link" and it was just fine. After upgrading when I open internet sharing and tap on connect, it says "cannot connect for an unknown reason. To change your connection settings, tap settings"
I can access GPRS on the phone, activesync is working fine. When the laptop is connected to the net, I can access internet in my phone with usb. But there is some bug(?) with the internet sharing through GPRS???
Am I doing something wrong??? Please help
Details
Model :Imate Jamin (HTC prophet)
ROm version : 2.20.7.9 PV WWE
Radio :02.07.20
ExtRomDAVIET
Thanks
ACMATT
i also have this same problem
Hi,
even I also have this same problem of sharing internet from my Jamin to laptop after upgrading it to WM 6.1
Its really nice after upgrading it, only problem is sharing the Net.
What should i do??? pls somebody look after this problem.
Thanks to XDA, its such a great site.
I've been reading and reading this forum but I seem to be missing some information.
I have modded my Verizon 700wx to WM6.1 and have enabled ICS. ICS is working over Bluetooth to my PC and works brilliantly. Yay Me.
Now, Can someone tell me (or point me in the right direction) how I can turn this phone into a hotspot for WiFi?
I'm thinking I need a WiFi SDIO Card? Will that get me to the next step as this phone does not have WiFi, just EVDO.
OR is there something in this phone where I can bridge the EVDO and turn the phone into a WiFi hotspot without the SDIO card?
I have WMWifiRouter installed, and but it says there are no Wifi Connectors. So I think I need a Wifi SDIO Card?
Suggestions? Thoughts?
700wx does not have a Wifi system built in ... from what you're describing, there may be something available to add on to it though.
The question that I have (and it sounds like you would be really good at helping me with) is how/where did you get ICS working on this phone? I'm trying to link my cellular internet connection to my laptop's bluetooth ...