i have a Qtek 9000 but still what to use some of my programs from my WM5
does this work?
Exchange Mail support
TOMTOM
TOMTOM Bluetooth GPS
Bluetooth
and Sync with Outlook from XP or Vista
if any can confirm this works with WM6 than i´ll go for it
i never use Video calls so that does´t matter.
Can any recommend a ROM for me?
Yep they all work.
Except if you are going to use Direct Push mail with Exchange, with a constantly active connection, you will probably have issues with your data connection hanging. The only way to resolve it is to enable/disable the radio (sometimes works) or soft reset.
To stop it happening in the first place, selecting GSM only (ie not 3G) in the Radio options does the job..
Related
Hi again and again folkes!!!
I recently instaled the (in)famous bluesoil bt stack that was found in a recent topic here at xda... first impression was good but... there is always a but... i've noticed that it ****s up my gprs connection and my modem settings... gprs network card disapears even when i return to MS BT... any soluction to solve this problem? i use the S110 to connect to msn in a regular basis and it sucks not being able to use it... and if someone bothers.. how (dont know if its possible) to stream video/sound from my pc via bluetooth and how to acess shared folders in my pc from the pocket also via bt? i already set auto ip(DHCP) in both... no way... assigned ip's in both and still nothing. If someone give it a time to post a How-to about PAN and VCN(control pc with pocket via bt) and other nice but strange to most users it would be very apreciated.
Deactivate the GPRS before installing
which installer of blusoleil stack do u use? is it the xxx.r2.arm ?
in this case the gprs problem should not appear, otherwise, you have to disconnect the GPRS so that only the white "G" appears.
installing the stack with shown the "G" only the GPRS Settings will work well after installation.
but another question, do u use the pan? and if its working for you
can u PLEASE post all the settings of your 3 lan adapters (btpda btwin and lanwin)
*gate/ip/dns/sub for each adapter and the ics on which adapter.
i'm getting the same error message every time if i try to activate the ics.
(like: 192.168.0.1*needed for ics could not be assigned, the ip adress is assigned to another pc in the network) i'm using german xp, don't know the exact words.
after reading 1000 posts and trying this all the last week and the pan won't work.
thx for every tip
greets phr³³k
Apologies if this is in the wrong area. I have spent alot of time researching this issue and im yet to find a resolution. I am working in area with a strict SOE on the dekstop PC. I have an O2 XDA Atom. with activesync 4.5 I am using GPRS to connect to the internet on my o2 this is working fine. however the problem occurs when i dock the O2 into its cradle. the GPRS connection will cut and i wont be able to reconnect it. I have changed the properties of activesync and my O2 between 'my work' and 'the internet' to no joy. I realise i can do this by turning off accept usb connections in activesync but then i cannot control my O2 with the software installed on my machine..
what i want to be able to do is run MSN on my O2 continually all day and be able to view the screen from my desktop along with it syncing my calendar etc. if there is any articles which can help me that would be good ive been trying to resolve this for some time now to no avail.
Thankyou in advance
in connections in settings you change which connection programs use
I'm having a problem with several applications, and I'm not sure if its problem with how they were written, or if the problem is in my WM6.
I leave my phone connected to my computer all day long. When I first started doing this, I quickly realized that it was using my computer's internet connection via ActiveSync instead of my phone's data connection. I didn't want this, and I found the option to tell ActiveSync "This computer is connected to my Work Network". After that, Pocket IE and IM+ (the two apps I use the most) started using my data connection and everything was good.
Then I started getting more apps, for example, TCPMP and Palringo. When I am connected to my computer via ActiveSync, these apps still try to use that connection instead of my data plan. The big problem here is that my work's firewall blocks things like IM and streaming media, so these apps don't work at all.
If I disconnect from ActiveSync and start up TCPMP and Palringo first, then they work just fine. It seems to stick with the phone's data connection once its established.
So, is this a problem where those programs are picking the wrong network adapter? Or is this some issue from running WM6 on my MDA? Maybe even something that's been fixed in a more recent WM6 rom?
Any help would be greatly appreciated! I have:
T-Mobile MDA
WM6 (InGeNeTiCs_15342_by_mfrazzz)
IPL/SPL 3.08
Probably something stupid...I don't know.
When I use my Diamond as a modem using "internet sharing" I can only connect to MSN 1% of the time.
The internet, email,,,,everything really, works fine.
When I connect my laptop to a "proper" connection all service work 100%.
Any ideas?
Cheers.
Blartiartfast said:
Probably something stupid...I don't know.
When I use my Diamond as a modem using "internet sharing" I can only connect to MSN 1% of the time.
The internet, email,,,,everything really, works fine.
When I connect my laptop to a "proper" connection all service work 100%.
Any ideas?
Cheers.
Click to expand...
Click to collapse
You mean MSN on the laptop? Strange, it has always worked with me. And should work: as has been explained in my dedicated Bible, the notebook has full port forwarding.
Nevertheless, if you can't get rid of this issue, consider hacking the traditional DUN on your Diamond - or, if there already is a cooked ROM with DUN, try giving it a try. See my Bible for more info.
NOTE that the above only applies to trying to access MSN on the desktop, NOT the phone itself.
Thanks for the reply.
Yes MSN on the laptop. All the features work fine on the Diamond fine (including MSN) All of the features (when connected to WIFI or RJ45) work fine on the laptop, it's just wheb I use the Diamond as a modem the laptop MSN fails.
No firewall on either device.
I'll have a read of your bible and see if it sheds any light.
P.s.
When I used my Kaiser with the same setup, everything worked fine.
Blartiartfast said:
Thanks for the reply.
Yes MSN on the laptop. All the features work fine on the Diamond fine (including MSN) All of the features (when connected to WIFI or RJ45) work fine on the laptop, it's just wheb I use the Diamond as a modem the laptop MSN fails.
No firewall on either device.
I'll have a read of your bible and see if it sheds any light.
P.s.
When I used my Kaiser with the same setup, everything worked fine.
Click to expand...
Click to collapse
dunno why the Diamond is messing up things - must be a bug with your ROM version. Look for a DUN-based hack.
own a htc touch 3g
i tried to synchronise the touch with activesync (PC1) over bluetooth (activesync over usb is already done) - it worked for some day
later on a second pc (PC2) i also made a owenship in activesync with connection over USB; tried also for this owenship a activesync bluetooth connection:
the second activesync bluetooth connection now works but the first one does not work anymore (for PC1 i get only the 'SerialPort' service for the bluetooth connection, not the 'ActiveSync' service).
i tried to re-do the pairing ecc eith PC1 - but no success
a few days later also the activesync bluetooth connection for PC2 stopped working (get only 'SerialPort' service for the bluetooth connection)
read some post and tried some solutions:
1) delete registry subkeys:
Bluetooth\Activesync\000a3a644396
Bluetooth\Device\000a3a644396
2) changed Bluetooth\Activesync\Initialised=1 (was 0 before) ...
3) softreset
4) re-do the pairing
but i only get the 'SerialPort' service for PC1 (and also for PC2) and not the 'ActiveSync' one
is there another solution available to solve this problem or the only way is to hardreset the device ?